VBS to write multiple lines in textfile - vbscript

I have a vbscript that checks for all users and checks for its last login time.
i open a file to write inside the file. However , i seem to have an issue where the it is writing only the last name it checks instead of all the names.
Result in the text should be :
user1
user2
user3
user4
However , this is my current result :
user4
How do i go about this?
I do apologize as i am mainly in C# and VBS is very new to me.
Option Explicit
Dim strComputer, objComputer, objUser, FSO, File
Const ForWriting = 2
strComputer = "."
Set objComputer = GetObject("WinNT://" & strComputer)
objComputer.Filter = Array("user")
For Each objUser In objComputer
Set FSO = CreateObject("Scripting.FileSystemObject")
Set File = FSO.OpenTextFile("C:\Users\sgbvx\Desktop\test\test.txt",ForWriting, True)
On Error Resume Next
Wscript.Echo objUser.Name & ", " & objUser.LastLogin
File.WriteLine objUser.Name
File.Write objUser.LastLogin
File.Close
If (Err.Number <> 0) Then
On Error GoTo 0
Wscript.Echo objUser.Name & ", "
End If
On Error GoTo 0
Next
File.Close

So apparently my code has some arrangement issue that created a lot errors.
Here's my answer and an updated code for the above :
Option Explicit
Dim strComputer, objComputer, objUser, FSO, File
Const ForWriting = 2
strComputer = "."
Set objComputer = GetObject("WinNT://" & strComputer)
objComputer.Filter = Array("user")
Set FSO = CreateObject("Scripting.FileSystemObject")
//You may change the file name or directory//
Set File = FSO.OpenTextFile("C:\temp\test.txt",ForWriting, True)
//Start of ForEach loop , previously Set FSO and Set File was in this loop//
For Each objUser In objComputer
On Error Resume Next
//Writes Username and LastLogin detail//
File.Write objUser.Name & ", " & objUser.LastLogin
File.WriteLine
If (Err.Number <> 0) Then
On Error GoTo 0
//Writes only Username if LastLogin was not detected//
File.Write objUser.Name & ", "
File.WriteLine
End If
On Error GoTo 0
Next
File.Close

Related

VBScript only copies empty (265K) PST from Network folder to Network Folder

Currently all users are mapped to their Home Z:\ drives. We have created (Network Share) P:\ drives for users to use for PST files. I am tasked with copying attached PSTs(whether they exist on the local C:\ drive or the user's personal share Z:\) to the new P:\, and remap their outlook. There are 1800 Users and attaching this script to a GPO is the logical way.
This script works successfully for the PST files on C:\. The issue I am running into, is that it only copies an empty "shell" version of the PST file (with the same name) that is attached from the user's Z:\ drive. An empty PST file (265K) is copied over to the P: drive. Below is the Code that I am running. Any assistance will be greatly Appreciated.
Option Explicit
Const OverwriteExisting = True
'get username, will use later
dim objNetwork, username, LogFolder, LogFile
Dim cnt : cnt = 0
Dim counter : counter = 0
Set objNetwork = CreateObject("WScript.Network")
username = objNetwork.UserName
username = LCase(username)
LogFolder = "c:\ProgramData\Logs\" & username
LogFile = LogFolder & "\" & "pst.txt"
'network path to write pst files to
Dim strNetworkPath : strNetworkPath = "\\NetworkShare\PST\" & username
If Not Right(strNetworkPath,1) = "\" Then strNetworkPath = strNetworkPath &
"\" End If
'initiate variables and instantiate objects
Dim objOutlook, objNS, objFolder, objFSO, objFName, objTextFile, pstFolder,
pstFiles, pstName, strPath, objShell
Set objFSO = CreateObject("Scripting.FileSystemObject")
'only run once per user, quit if log file already created from previous run
If objFSO.FileExists(LogFile) Then
MsgBox "Script has already been run, Exiting"
WScript.Quit()
End If
Set objTextFile = objFSO.CreateTextFile("c:\ProgramData\Logs\" & username &
"\pst.txt" , True)
Set objOutlook = CreateObject("Outlook.Application")
Set objNS = objOutlook.GetNamespace("MAPI")
Set objShell = WScript.CreateObject("Wscript.Shell")
Dim count : count = -1
'Enumerate PST files and build arrays
objTextFile.Write("Enumerating PST files" & vbCrLf)
For Each objFolder in objNS.Folders
If GetPSTPath(objFolder.StoreID) <> "" Then
count = count + 1
pstFiles = GetPSTPath(objFolder.StoreID)
pstName = objFolder.Name
pstFolder = objFolder
objTextFile.Write(count & " " & pstFiles & vbCrLf)
ReDim Preserve arrNames(count)
arrNames(count) = pstName
ReDim Preserve arrPaths(count)
arrPaths(count) = pstFiles
End If
Next
'quits if no pst files were found
If count < 0 Then
MsgBox "No PST Files Found."
Wscript.Quit()
End If
MsgBox "PST Migration Starting. Outlook will close and re-open, Please be
patient."
For Each pstName in arrNames
set objFolder = objNS.Folders.Item(pstName)
objNS.RemoveStore objFolder
Next
set objFolder = Nothing
'closes the outlook session
objOutlook.Session.Logoff
objOutlook.Quit
Set objOutlook = Nothing
Set objNS = Nothing
objTextFile.Write("moving them" & vbCrLf)
' copies the found pst files to the new location
Dim pstPath
For Each pstPath In arrPaths
On Error Resume Next
objTextFile.Write(pstPath & vbCrLf)
pstPath.Copy(strNetworkPath)
objFSO.Copyfile pstPath, strNetworkPath
If Err.Number <> 0 Then
Wscript.sleep 5000
objFSO.Copyfile pstPath, strNetworkPath
End If
Err.Clear
On Error GoTo 0
Next
Set objFSO = Nothing
'sleep shouldn't be necessary, but was having issues believed to be related
to latency
wscript.sleep 5000
'Re-open outlook
Set objOutlook = CreateObject("Outlook.Application")
Set objNS = objOutlook.GetNamespace("MAPI")
'Re-map Outlook folders
For Each pstPath In arrPaths
objTextFile.Write("Remapping " & pstPath & " to " & strNetworkPath &
Mid(pstPath, InStrRev(pstPath, "\") + 1) & vbCrLf)
objNS.AddStore strNetworkPath & Mid(pstPath, InStrRev(pstPath, "\") + 1)
Next
count = -1
For Each objFolder In objNS.Folders
If GetPSTPath(objFolder.StoreID) <> "" Then
count = count + 1
objTextFile.Write("Renaming " & GetPSTPath(objFolder.StoreID) & " to " &
arrNames(count) & vbCrLf)
objFolder.Name = arrNames(count)
End If
Next
objOutlook.Session.Logoff
objOutlook.Quit
objTextFile.Write("Closing Outlook instance and unmapping obj references...")
Set objFolder = Nothing
Set objTextFile = Nothing
Set objOutlook = Nothing
Set objNS = Nothing
'wscript.echo "PST Migration and Remapping is Complete"
MsgBox "PST Migration and Remapping is Complete"
wscript.Quit
Private Function GetPSTPath(byVal input)
'Will return the path of all PST files
Dim i, strSubString, strPath
For i = 1 To Len(input) Step 2
strSubString = Mid(input,i,2)
If Not strSubString = "00" Then
strPath = strPath & ChrW("&H" & strSubString)
End If
Next
Select Case True
Case InStr(strPath,":\") > 0
GetPSTPath = Mid(strPath,InStr(strPath,":\")-1)
Case InStr(strPath,"\\") > 0
GetPSTPath = Mid(strPath,InStr(strPath,"\\"))
End Select
End Function

Replace a specific string with the filename?

How to replace a specific string with the filename? Example: I have several files with different names (like: Test.asp, Constant.asp, Letter.asp, etc.) within a subfolder that contain the text "ABC123". I would like to replace the "ABC123" in each file with the filename.
Below is the code I have that finds string and replaces it with a specific string but it doesn't do the job that I listed above.
Option Explicit
Dim objFilesystem, objFolder, objFiles, objFile, tFile, objShell, objLogFile,objFSO, objStartFolder, colFiles
Dim SubFolder, FileText, bolWriteLog, strLogName, strLogPath, strCount, strCount2, strOldText, strNewText, strEXT
bolWriteLog = True
Const ForReading = 1
Const ForWriting = 2
Const TriStateUseDefault = -2
Set objFilesystem = WScript.CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
strLogName = "log.txt"
strLogPath = "C:\" & strLogName
strCount = 0
strCount2 = 0
strOldText = "ABC123"
strNewText = ""
strEXT = "asp"
'Initialize log file
If bolWriteLog Then
On Error Resume Next
Set objLogFile = objFileSystem.OpenTextFile(strLogPath, 2, True)
WriteLog "############### Start Log ##################"
If Not Err.Number = 0 Then
MsgBox "There was a problem opening the log file for writing." & Chr(10) & _
"Please check whether """ & strLogPath & """ is a valid file and can be openend for writing." & _
Chr(10) & Chr(10) & "If you're not sure what to do, please contact your support person.", vbCritical, "Script Error"
WScript.Quit
End If
On Error Goto 0
End If
Set objFSO = CreateObject("Scripting.FileSystemObject")
objStartFolder = "D:\MyFolder"
Set objFolder = objFSO.GetFolder(objStartFolder)
WScript.Echo objFolder.Path
Set colFiles = objFolder.Files
For Each objFile In colFiles
'WScript.Echo objFile.Name
' Now we have an exception for all files that can not be opened in text modus: all extensions such as "exe" should be listed upfront.
ReplaceText(objFile)
Next
ShowSubfolders objFSO.GetFolder(objStartFolder)
Sub ReplaceText(objFile)
If InStr(1, strEXT, Right(LCase(objFile.Name), 3)) = 0 Or objFile.Size = 0 Then
Else
strCount = strCount + 1
WriteLog("Opening " & objFile.Name)
Set tFile = objFile.OpenAsTextStream(ForReading, TriStateUseDefault)
FileText = tFile.ReadAll
tFile.Close
If InStr(FileText, strOldText) Then
WriteLog("Replacing " & strOldText & " with " & strNewText & ".")
FileText = Replace(FileText, strOldText, strNewText)
WriteLog("Text replaced")
Else
WriteLog(strOldText & " was not found in the file.")
strCount2 = strCount2 + 1
End If
Set tFile = objFile.OpenAsTextStream(ForWriting, TriStateUseDefault)
tFile.Write FileText
tFile.Close
FileText = ""
strCount = 0
strCount2 = 0
End If
End Sub
Sub ShowSubFolders(Folder)
For Each Subfolder in Folder.SubFolders
'WScript.Echo Subfolder.Path
Set objFolder = objFSO.GetFolder(Subfolder.Path)
Set colFiles = objFolder.Files
For Each objFile in colFiles
'WScript.Echo objFile.Name
ReplaceText(objFile)
Next
ShowSubFolders Subfolder
Next
End Sub
WriteLog "############### EndLog ##################"
WScript.Echo "Script Complete"
objShell.Run "C:\" & strLogName
'Clear environment and exit
On Error Resume Next
Set tFile = Nothing
Set objFile = Nothing
Set objFiles = Nothing
Set objFolder = Nothing
Set objLogFile = Nothing
Set objFilesystem = Nothing
Set objShell = Nothing
WScript.Quit
'Subs and functions ********** DO NOT EDIT ***************
Sub WriteLog(sEntry)
If bolWriteLog Then objLogFile.WriteLine(Now() & ": Log: " & sEntry)
End Sub
I can give you a one line Ruby solution, should be not too difficult to translate that in Python but somewhat more extensive in VbScript I am afraid. First a generic search and replace version.
ARGV[0..-3].each{|f| File.write(f, File.read(f).gsub(ARGV[-2],ARGV[-1]))}
Save it in a script, eg replace.rb
You start in on the command line (here cmd.exe) with
replace.rb *.txt <string_to_replace> <replacement>
broken down so that I can explain what's happening but still executable
# ARGV is an array of the arguments passed to the script.
ARGV[0..-3].each do |f| # enumerate the arguments of this script from the first to the last (-1) minus 2
File.write(f, # open the argument (= filename) for writing
File.read(f) # open the argument (= filename) for reading
.gsub(ARGV[-2],ARGV[-1])) # and replace all occurances of the beforelast with the last argument (string)
end
And finally your request to replace ABC123 with the filename.
Of course tested and working
ARGV[0..-1].each{|f| File.write(f, File.read(f).gsub('ABC123', f))}
Contents of one of my testfiles (1.txt) after executing
test phrase
1.txt
EDIT
I see you want subfolder recursion on a fixed folder, no problem
Dir['**/*'].each{|f| File.write(f, File.read(f).gsub('ABC123', f)) unless File.directory?(f) }

I am trying to find specific links on users desktops and create a file logging the results

I have used similar before and I have local admin rights on every computer in our network. The following code generates an error on line 16 char 1.
line 16 For Each objsubfolder In objFSO.GetFolder("\" & strComputer & "%HOMEPATH%").subfolders
If the file exists it should write a line in the text file to indicate so for each user with a profile. If the file doesn't exist is should write a line in the same text file.
The error I get is Path not found 800A004C.
The computers.txt file contains a list of all the computers I want to check.
InputFile = "computers.txt"
Const DeleteReadOnly = True
Const ForAppending = 8
Dim goFS : Set goFS = CreateObject("Scripting.FileSystemObject")
Dim gsLog : gsLog = ".\logdemo.log"
WScript.Echo gsLog, "exists:", CStr(goFS.FileExists(gsLog))
' .OpenTextFile(filename[, iomode[, create[, format]]])
Dim goLog : Set goLog = goFS.OpenTextFile(gsLog, ForAppending, True)
goLog.WriteLine Now & " start"
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFile = objFSO.OpenTextFile(InputFile)
Do While Not (objFile.AtEndOfStream)
strComputer = objFile.ReadLine
For Each objsubfolder In objFSO.GetFolder("\\" & strComputer & "%HOMEPATH%").subfolders
If objFSO.FileExists(objsubfolder.Path & "\desktop\program1.LNK") Then
golog.WriteLine Join(Array(Now, strComputer, objsubfolder, "This Computer has Program 1"))
Else
golog.WriteLine Join(Array(Now, strComputer, objsubfolder, "None"))
End If
Next
Loop
golog.WriteLine Now & " End"
golog.WriteLine "-----------------------------------------------------------"
golog.Close
MsgBox "Done"
To prove that the FSO does not expand environment strings automagically:
Dim oFS : Set oFS = CreateObject("Scripting.FileSystemObject")
Dim oWS : Set oWS = CreateObject("WScript.Shell")
Dim sPath
sPath = "%windir%\addins"
WScript.Echo qq(sPath), CStr(oFS.FolderExists(sPath))
sPath = oWS.ExpandEnvironmentStrings("%windir%\addins")
WScript.Echo qq(sPath), CStr(oFS.FolderExists(sPath))
output:
"%windir%\addins" False
"C:\WINDOWS\addins" True
So put some work into feeding a valid path to .GetFolder().

VBS script find and delete file

I am trying to find a specific file on computer and delete it.
This is my code:
Const DeleteReadOnly = True
Set oFSO = CreateObject("Scripting.FileSystemObject")
Set oWshShell = CreateObject("WScript.Shell")
sDir = oWshShell.ExpandEnvironmentStrings("%temp%\dir.txt")
sFileName = "\date.vbs"
If oFSO.FileExists(sDir) Then oFSO.DeleteFile(sDir)
For Each oDrive In oFSO.Drives
if oDrive.DriveType = 2 Then Search oDrive.DriveLetter
Next
Set oFile = oFSO.OpenTextFile(sDir, 1)
aNames = Split(oFile.ReadAll, VbCrLf)
oFile.Close
For Each sName In aNames
If InStr(1, sName, sFileName, 1) > 0 Then WScript.Echo sName
Next
dim filesys
Set filesys = CreateObject("Scripting.FileSystemObject")
filesys.CreateTextFile "\date.vbs", True
If filesys.FileExists("\date.vbs") Then
filesys.DeleteFile "\date.vbs"
Wscript.Echo("File deleted")
End If
Sub Search(sDrive)
WScript.Echo "Scanning drive " & sDrive & ":"
oWshShell.Run "cmd /c dir /s /b " & sDrive & ":\" & sName & " >>" & sDir, 0, True
End Sub
The code is working only partially. When the file "date.vbs" is in root folder (C:\date.vbs) then it is deleted but when it is in folder (C:\backup\date.vbs) then it will not be deleted. Do you know which code changes I should make to be able to delete file even when it is not in root but anywhere in computer?
Thank you! V.
UPDATE:
The code is pretty much working right now. I just have a final problem of deleting the file. I am able to change the attributes from Read-only to normal but still i get the error of access denied.
This is my code:
Const DeleteReadOnly = True
Dim oFSO, oDrive, sFileName, ws, WshS, fso, usrProfile, oFolder, skypefolder
Set oFSO = CreateObject("Scripting.FileSystemObject")
sFileName = "Skype.exe"
Set WshS = WScript.CreateObject("WScript.Shell")
usrProfile = WshS.ExpandEnvironmentStrings("%UserProfile%")
skypefolder = "C:\Program Files (x86)\Skype\"
For Each oDrive In oFSO.Drives
If oDrive.DriveType = 2 Then Recurse oFSO.GetFolder(skypefolder)
Next
Sub Recurse(oFolder)
Set oFile = CreateObject("Scripting.FileSystemObject")
Dim oSubFolder, oFile
If IsAccessible(oFolder) Then
For Each oSubFolder In oFolder.SubFolders
Recurse oSubFolder
Next
WScript.Echo oFolder.Path
For Each oFile In oFolder.Files
If oFile.Name = sFileName And oFile.Attributes And 1 Then
oFile.Attributes = 0
oFile.Delete True
End If
Next
End If
End Sub
Function IsAccessible(oFolder)
On Error Resume Next
IsAccessible = oFolder.SubFolders.Count >= 0
End Function
Thank you for help!
Code I use to run the script as ADMIN. After this it started to show the MessageBoxes. Before it was running in a console.
If WScript.Arguments.Named.Exists("elevated") = False Then
CreateObject("Shell.Application").ShellExecute "wscript.exe", """" & WScript.ScriptFullName & """ /elevated", "", "runas", 1
WScript.Quit
Else
Set oShell = CreateObject("WScript.Shell")
oShell.CurrentDirectory = CreateObject("Scripting.FileSystemObject").GetParentFolderName(WScript.ScriptFullName)
'WScript.Echo("Now running with elevated permissions")
End If
So I believe there is something wrong in this code.
Your approach is much too complicated. Use a simple recursive function:
Option Explicit
Const DeleteReadOnly = True
Dim oFSO, oDrive, sFileName
Set oFSO = CreateObject("Scripting.FileSystemObject")
sFileName = "date.vbs"
For Each oDrive In oFSO.Drives
If oDrive.DriveType = 2 Then Recurse oDrive.RootFolder
Next
Sub Recurse(oFolder)
Dim oSubFolder, oFile
If IsAccessible(oFolder) Then
For Each oSubFolder In oFolder.SubFolders
Recurse oSubFolder
Next
For Each oFile In oFolder.Files
If oFile.Name = sFileName Then
'oFile.Delete ' or whatever
End If
Next
End If
End Sub
Function IsAccessible(oFolder)
On Error Resume Next
IsAccessible = oFolder.SubFolders.Count >= 0
End Function
To achieve case-insensitive file name comparison, you could use
If StrComp(oFile.Name, sFileName, vbTextCompare) = 0 Then
As an exercise: You can also use the WMI Service to find certain files. You don't have to go through all folders, you just query the file on any drive, on any folder:
Function find_file(filename)
Dim objWMIService, colItems, objItem, strComputer
strComputer = "."
Set objWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("SELECT * FROM CIM_DataFile WHERE FileName='" & filename & "'",,48)
For Each objItem in colItems
msgbox "Found " & objItem.Name & " in " objItem.Path
Next
End Function
Note: It can take long before the function has returned its results.

VBScript: way to check why the script stopped?

I have this VBScript which runs however, while it is processing, it will randomly stop and require a user to hit the spacebar for it to display the rest of its ongoing output.
How do I figure out why this is happening?
Here is a copy of the script:
'On Error Resume Next
Dim arrFolders()
intSize = 0
Function StampNow()
Dim Hr, Mn, Yr, Mon, Dy, Date1
Date1=Now()
Hr=DatePart("h",Date1)
Mn=DatePart("n",Date1)
Yr = DatePart("yyyy",Date1)
Mon = DatePart("m",Date1)
Dy = DatePart("d",Date1)
StampNow = Yr & "-" & Mon & "-" & Dy
end function
'Output log info.
Function OutputToLog (strToAdd)
Dim strDirectory,strFile,strText, objFile,objFolder,objTextFile,objFSO
strDirectory = "c:\log"
strFile = "\dpadmin_copy2run-"& StampNow & ".bat"
'strText = "dpadmin_copy2"
strText = strToAdd
' Create the File System Object.
Set objFSO = CreateObject("Scripting.FileSystemObject")
' Check that the strDirectory folder exists.
If objFSO.FolderExists(strDirectory) Then
Set objFolder = objFSO.GetFolder(strDirectory)
Else
Set objFolder = objFSO.CreateFolder(strDirectory)
'WScript.Echo "Just created " & strDirectory
End If
If objFSO.FileExists(strDirectory & strFile) Then
Set objFolder = objFSO.GetFolder(strDirectory)
Else
Set objFile = objFSO.CreateTextFile(strDirectory & strFile)
'Wscript.Echo "Just created " & strDirectory & strFile
End If
set objFile = nothing
set objFolder = nothing
' OpenTextFile Method needs a Const value
' ForAppending = 8 ForReading = 1, ForWriting = 2
Const ForAppending = 8
Set objTextFile = objFSO.OpenTextFile _
(strDirectory & strFile, ForAppending, True)
' Writes strText every time you run this VBScript.
objTextFile.WriteLine(strText)
objTextFile.Close
End Function
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
strFolderName = "D:\1\production\Openjobs"
Set colSubfolders = objWMIService.ExecQuery _
("Associators of {Win32_Directory.Name='" & strFolderName & "'} " _
& "Where AssocClass = Win32_Subdirectory " _
& "ResultRole = PartComponent")
dim diffindates
'Init vars for regex.
Dim retVal, retVal2
Dim Lastprop
Dim objRegExpr 'regex variable
Set objRegExpr = New regexp
Set objRegExprX31 = New regexp
objRegExpr.Pattern = "[0-9][0-9][0-9][0-9][0-9][0-9][A-Z][A-Z][A-Z]"
objRegExprX31.Pattern = "[0-9][0-9][0-9][0-9][0-9][0-9]X31"
objRegExpr.Global = True
objRegExprX31.Global = True
objRegExpr.IgnoreCase = True
objRegExprX31.IgnoreCase = True
'Variables for getting last accessed property.
Dim fs, f
Set fs = CreateObject("Scripting.FileSystemObject")
'Current time vars.
Dim currenttime
currenttime = Now()
ParentFolder = "D:\1\Production\Openjobs\ClosedJobs"
For Each objFolder in colSubfolders
intSize = intSize + 1
retVal = objRegExpr.Test(objFolder.Name)
retVal2 = objRegExprX31.Test(objFolder.Name)
if (retVal OR retVal2 ) then
'set filename to array
strFolderName = objFolder.Name
'Get last modified date.
Set f = fs.GetFolder(objFolder.Name)
Lastprop = f.DateLastModified
'MsgBox(Lastprop)
if ( DateDiff("m", f.DateLastModified, Now()) > 4) then
diffindates = DateDiff("m", f.DateLastModified, Now())
Set objShell = CreateObject("Shell.Application")
Set objCopyFolder = objShell.NameSpace(ParentFolder)
OutputToLog("rem " & f.DateLastModified & ":" & objFolder.Name )
outputtolog("move /Y """ & objFolder.Name & """ " & ParentFolder)
wscript.echo(diffindates & ":" & objFolder.Name & vbCr)
end if
end if
Next
Update
It stops at the line:
Set objTextFile = objFSO.OpenTextFile _
(strDirectory & strFile, ForAppending, True)
with the error Microsoft VBScript runtime error: Permission denied
I'm a little confusd by this. The logfile was only 356kb
I was able to run your script several times without it pausing for input. Run your script with the //X flag to start it in the debugger:
>cscript //nologo //X dpadmin_copy2.vbs"
You should be able to then step through the code.
You can also start putting in wscript.echo trace statements everywhere and see if you can narrow down what it's waiting on.
One thing that's gotten me in the past; If your command console is in QuickEdit mode and you accidentally click anywhere in the console window, the console will hang while it waits for you to press a key.
Well the first step is to remove any global On Error Resume Next statements. Better feedback would come if we could see the script.
You usually get an Permission denied when trying to write to a text file when the text file already has an open handle from some other process or because you have previously opened a handle earlier in you code which you have not closed. I haven't tried this but I don't know why this wouldn't work, you can look at using Handle from Sysinternals (Microsoft) to tell you what process has the open handle for the file. Please see here for a further reference of how to use Handle: http://www.orcsweb.com/blog/post/Closing-open-file-handles.aspx You could also write a second script which runs in a loop to monitor the main script. The second script can verify the first script by doing a WMI Process query which returns only processes that match a defined command line. The second script could then restart the main it stops, alert you, log a file, launch a handle search, etc.

Resources