Delphi 10.3.3 fails macOS notarization - macos

My program was being notarized in Delphi 10.3.2, but fails in 10.3.3. PAClient exits with code 1. Is there a log that will help me diagnose the problem? If so, how do I find it?
Here is the whole error afterward:
Connecting to 192.168.1.231 on port 64211...
Status Code: 2, LogFileURL:
c:\program files (x86)\embarcadero\studio\20.0\bin\CodeGear.Deployment.targets(581,5): error MSB6006: "paclient" exited with code 1.
Done building target "_OSXDeveloperID" in project "MintToReport4.dproj" -- FAILED.
Done building project "MintToReport4.dproj" -- FAILED.
Build FAILED.
c:\program files (x86)\embarcadero\studio\20.0\bin\CodeGear.Deployment.targets(581,5): error MSB6006: "paclient" exited with code 1.
0 Warning(s)
1 Error(s)

Related

Error CS2007: Unrecognized option: /analyzerconfig

I have a Unity project which I use Roslyn for Code Analysis and I found that you can get the warnings and errors report from console using msbuild.
In the PC I have VS 2019 version 16.6.3, it gave the following error that I will comment below and updated to version 16.11.9, thinking it was the incompatibility and still gets the error. I tried running the command described below on other PCs with other versions of VS and it works fine, but I have not been able to identify what makes the command work well.
Command:
By running the following line in Developer Command Prompt for VS 2019:
msbuild ScriptsAssembly.csproj /p:RunCodeAnalysis=true /t:Clean;Rebuild
I expect to see the total number of warnings for the project and zero errors with successful execution like this:
Instead I get the following error:
CSC : error CS2007: Unrecognized option: '/analyzerconfig:C:\Users\...\Documents\...\...\UnityProject\.editorconfig' [C:\Users\...\Documents\...\...\UnityProject\SimpleJSON
.csproj]
Done Building Project "C:\Users\...\Documents\...\...\UnityProject\SimpleJSON.csproj"
(default targets) -- FAILED.
Done Building Project "C:\Users\...\Documents\...\...\UnityProject\ScriptsAssembly.csp
roj" (Clean;Rebuild target(s)) -- FAILED.
Build FAILED.
...
"C:\Users\...\...\...\...\UnityProject\Project.csproj" (Clean;Rebuild target) (1) ->
"C:\Users\...\...\...\...\UnityProject\SimpleJSON.csproj" (default target) (2:3)
->
(CoreCompile target) ->
CSC : error CS2007: Unrecognized option: '/analyzerconfig:C:\Users\...\Documents\...\...\UnityProject\.editorconfig' [C:\Users\...\Documents\...\...\UnityProject\SimpleJS
ON.csproj]
1 Warning(s)
1 Error(s)
Time Elapsed 00:00:00.91
What I expect to see is a thousand warnings, instead of 1.
I don't know if I am missing a package to install in VS. I have seen the error that the compiler message mentions in the Microsoft documentation, but it doesn't help me much.
Any idea, or help is welcome.

Unable to debug .NET Core app

I'm having and issue with Visual Studio and a .NET Core API project. It's been working fine but something must have changed because I'm now getting the following output when trying to debug the project:
The program '[18032] dotnet.exe' has exited with code -2147450749 (0x80008083).
The program '[17688] iisexpress.exe' has exited with code 0 (0x0).
The program '[5500] iexplore.exe' has exited with code -1 (0xffffffff).
The event viewer is showing this error:
Failed to start process with commandline '"C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\Extensions\Microsoft\Web Tools\ProjectSystem\VSIISExeLauncher.exe" -debug -p "C:\Program Files (x86)\dotnet\dotnet.exe" -a "C:\Projects\Utilities\API\src\API\bin\Debug\netcoreapp1.0\API.dll" -pidFile "C:\Users\username\AppData\Local\Temp\tmp742C.tmp" -wd "C:\BlueSky\Utilities\API\src\API"', ErrorCode = '0x80004005'.
I'm not sure why this is happening, if anyone has any insight into this it would be appreciated.
Do as fallow:
Close Visual Studio
Delete the project.lock.json file (if exists)
If above step won't help then try to remove .vs folder
Open Visual Studio as Administrator (the file will be restored and you shouldn't have problems anymore)
There is also an option to use Kestrel instead of IIS Express but that's just an workaround.

VS2013 TypeScript error MSB6006: "tsc.exe" exited with code 1

I have a Web Project with some typescript files but suddenly I started receiving this error message:
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\TypeScript\Microsoft.TypeScript.targets(95,5): error MSB6006: "tsc.exe" exited with code 1.
1>
1>Build FAILED.
I have no idea why this started. Please Help
This question is solved in...
See these posts:
https://stackoverflow.com/a/41053281/1780318
"tsc.exe" exited with code 1
"tsc.exe" exited with code 1 when using ASP.net 4 MVC

error MSB3073: The command "call "C:\project\clientdll\dependencies\gitrev.bat" :VCEnd" exited with code 255

I'm getting this message when trying to build my project (Visual Studio 2010):
Error 120 error MSB3073: The command "call "C:\project\clientdll\dependencies\gitrev.bat"
:VCEnd" exited with code 255.
Yes, the file does exist, I used this command in Pre build event, it looks like this:
call "$(SolutionDir)dependencies\gitrev.bat"
Any ideas?
Your Visual Studio is probably not openend with sufficient privileges. Open as admin and try again.
1) right click on Visual Studio Icon
2) choose run as administrator
3) In Start page choose your application.
4) Clean solution
5) Verify if outputs are removed and that the bat file is present in location
6) Rebuild solution
7) Check for errors again.
I had the same error when forgot to add the "call" prefix before the label:
(
...
:MYLABEL blablabla
...
)
The "(:" sequence basically will output the "Continue?" in the opened console window. Seems the Visual Studio does some track of what kind of cmd.exe behaviour and immediately stops the cmd.exe process with the 255 error.
I've had another error like:
error MSB3073: :VCEnd" exited with code -1.
Where the reason of this was the script output of another sequence (only in Visual Studio 2010 and higher):
... error ... :
Well, the Visual Studio tries to guess there the script behaves badly and stops it with these kind of errors.

Build failed of downloaded .mcp file in MPLAB for PIC18F2550 and PIC18F4550

I have installed Mplab version 8.9, I have downloaded a firmware package from this link
But, when I hit build all it shows me the following output and build fails:
----------------------------------------------------------------------
Debug build of project `D:\microchip\WFF Generic HID Demo 3\WFF_GenericHID_Demo_3.mcp' started.
Language tool versions: mplink.exe v9.80, mcc18.exe v9.80, mplib.exe v9.80
Preprocessor symbol `__DEBUG' is defined.
Thu May 29 15:44:49 2014
----------------------------------------------------------------------
Make: The target "D:\microchip\WFF Generic HID Demo 3\main.o" is out of date.
Executing: "C:\Program Files (x86)\Microchip\xc8\v1.31\bin\mcc18.exe" -p=18F4550 /i"..\Microchip Solutions v2011-07-14\Microchip\Include" "main.c" -fo="main.o" -D__DEBUG -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
Make: The target "D:\microchip\WFF Generic HID Demo 3\usb_descriptors.o" is out of date.
Executing: "C:\Program Files (x86)\Microchip\xc8\v1.31\bin\mcc18.exe" -p=18F4550 /i"..\Microchip Solutions v2011-07-14\Microchip\Include" "usb_descriptors.c" -fo="usb_descriptors.o" -D__DEBUG -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
usb_descriptors.c:
125: rom struct{BYTE report[28];}hid_rpt01={
(984) type redeclared ^
^ (1098) conflicting declarations for variable "hid_rpt01" (usb_descriptors.c:125)
(908) exit status = 1
(908) exit status = 1
Halting build on first failure as requested.
----------------------------------------------------------------------
Debug build of project `D:\microchip\WFF Generic HID Demo 3\WFF_GenericHID_Demo_3.mcp' failed.
Language tool versions: mplink.exe v9.80, mcc18.exe v9.80, mplib.exe v9.80
Preprocessor symbol `__DEBUG' is defined.
Thu May 29 15:44:51 2014
----------------------------------------------------------------------
BUILD FAILED
I tried to find the problem in this link also, but i could not find its root cause.
I started to try this because i wanted to make my own shields and pcb for my projects instead of arduino and the like.
Please help me with this problem.

Resources