IF test against ARG_MAX and number of files in directory - bash

I have potentially a large number of generated files and subdirectories in a directory for which the number is not known ahead of execution. For simplicity, lets say I just want to invoke
mv * /another_dir/.
But for large numbers of files and subdirectories, it'll come back with the dreaded 'argument too long'. Yes I know find and xargs is a way to deal with it. But I want to test that number against ARG_MAX and try it that way first.
I'm on a Mac and so I can't up the ulimit setting.
So far I have
# max_value
if ((expr `getconf ARG_MAX` - `env|wc -c` - `env|wc -l` \* 4 - 2048) ) ; then echo "ok" ; fi
which offers me a value to test against.
Lets say my test value to compute number of files or subdirectories in directory is based on
# test_value
(find . -maxdepth 1 | wc -l)
How can I get a working expression no matter how many files
if (test_value < max_value ) ; then echo "do this" else echo "do that" ; fi
Every way I try to construct the if test, the syntax fails for some reason in trying to set the max_value and test_value parameters and then test them together. Grateful for help.

When writing shell scripts, you have to pay a lot of attention to what context you're in, and use the right syntax for that context. The thing that goes between if and then is treated as a command, so you could use e.g. if expr 2 \> 1; then. But the modern replacement of the expr command is the (( )) arithmetic expression, so you'd use if (( 2 > 1 )); then. Note that you don't need to escape the > because it's no longer part of a regular command, and that you cannot put spaces between the parentheses ( ( something ) ) does something completely different from (( something )).
(( )) lets you run a calculation/comparison/etc as though it were a command. It's also common to want to use the result of a calculation as part of a command; for that, use $(( )):
max_value=$(($(getconf ARG_MAX) - $(env|wc -c) - $(env|wc -l) * 4 - 2048))
test_value=$(ls -A | wc -l)
Note that I used $( ) instead of backticks; it does essentially the same thing, with somewhat cleaner syntax. And again, the arrangement of parentheses matter: $(( )) does a calculation and captures its result; $( ) runs a command and captures its output. And $( ( ) ) would run a command in a pointless sub-subshell and capture its output. Oh, and I used ls -A because find . -maxdepth 1 will include . (the current directory) in its output, giving an overcount of 1. (And both the find and ls versions will miscount files with linefeeds in their name; oh, well.)
Then, to do the final comparison:
if ((test_value < max_value)) ; then echo "do this" else echo "do that" ; fi

Related

How to delete folders that fail a condition in bash script

I have a number of folders that are constantly and automatically generated. Some are garbage and need to be cleared out. Each folder produces a generations.txt which I want to count the important lines to determine whether or not the folder should be deleted. I'd like to have a bash script I can run every so often to clean things up.
Here's what I have. I can echo the command I want but I don't believe it outputs the integer to compare to 5. Any suggestions would really help me out. Please and thank you!
#!/bin/bash
SEARCHABLES="grep -Evc 'Value:' "
for d in */
do
PATH=$d'generations.txt'
COMMAND=$SEARCHABLES$PATH
if $COMMAND < 5
then
rm -rf $d
fi
done
You're not getting the output of the command, you need $(...) to execute a command and substitute its output.
To perform the arithmetic comparison, you have to put it inside ((...)).
#!/bin/bash
SEARCHABLES="grep -Evc 'Value:' "
for d in */
do
PATH="$d"'generations.txt'
COMMAND=$SEARCHABLES$PATH
if (( $($COMMAND) < 5 ))
then
rm -rf "$d"
fi
done
See BashFAQ/050 - I'm trying to put a command in a variable, but the complex cases always fail!
for a more detailed explanation.
In short, embedding a command in a variable is a faulty approach to the problem here because the single quotes in 'Value:' will be treated like literal data to search for. Syntax parsing happens before expansions, so you can't embed quotes in a variable like that. What you need is a function:
_count() {
grep -Evc 'Value:' "$1"
}
_count "$PATH"
Then compare the output of the function using an arithmetic expression:
occurrences=$( _count "$PATH" )
if (( occurrences < 5 )) ; then
...
fi

Identifying folder with name as largest number in the directory

there is a directory which contains folders named with numbers, i've to find the folder with largest number in that directory.
This is the script i've written to find that folder:
files='ls path/'
var=0
for file in $files
do
echo $file
tmp=$((file-"0"))
if [ $tmp -gt $var ]
then
var=$tmp
fi
done
echo $var
But it's not working. It gives below error after invoking the script using command sudo ./restore2.sh.
ls
path/
./restore2.sh: line 6: path/: syntax error: operand expected (error token is "/")
0
Try this:
#!/bin/bash
files=`ls path/`
var=0
for file in $files
do
echo $file
tmp=$((file-"0"))
if [ $tmp -gt $var ]
then
var=$tmp
fi
done
echo $var
there's a backtick here: ls path/ instead of single or double-quotes.
I've only corrected this statement and it worked. and notice to add #!/bin/bash at the top of the script. This will tell your system to run the script in a bash shell.
You're using single quotes instead of backticks files='ls path/'. It's trying to use it as a literal string instead of evaluating it.
Also, for that specific task, you can just do:
ls test | awk '{if($1 > largest){largest = $1}} END{print largest}'
To have it a bit simpler.
Use find instead:
find . -maxdepth 1 -type d -regextype "posix-extended" -regex "^.*[[:digit:]]+.*$" | sort -n | tail -1
Set the maxdepth to 1 to check for directories within this directory only and no deeper. Set the regular expression type to posix-extended and search for all directories that have one or more digits. Print the result and order through sort before taking the largest one with tail -1.
Does path/ have any files in it? It looks like it's empty.
You should be getting a completely different complaint...
You don't want the path info in the filename. Rather than strip it with ${file##*/}, just go there and use non-path'd names.
An adaptation using your own logic as its base -
cd /whatever/path/ # go where the files are
var=-1 # initialize comparator
for file in [0-9]* # each entry that starts with a digit
do [[ "$file" =~ [^0-9] ]] && continue # skip any file with nondigit contents
[[ -f "$file" ]] || continue # only process plain files
(( file > var )) && var=$file # remember largest seen
done
echo $var # report largest
If you are sure there will be no negative numbered filenames, this should do it.
If there can be valid negatives, then your initialization needs to be appropriately lower, and the exclusion of nondigits should include the minus sign, as well as the list of files to select.
Note that this doesn't parse ls and doesn't require piping through a sort or spawning any other processes -- it's all handled in the bash interpreter and should be pretty efficient.
If you are sure of your data, and know there aren't any negatives or files named just 0 or non-plain-file entries in the directory that match the [0-9]* pattern, you can simplify it to just
cd /whatever/path/ # go where the files are
for file in [0-9]*; do (( file > var )) && var=$file; done
echo $var # report largest
As an aside, if you wanted to preserve the "make a list first" logic, you should still NOT use ls. Use an array.
cd /wherever/your/files/are/
files=( [0-9]* )
for file in "${files[#]}"
do : ...

Bash for loop doesn't execute one sentence more that once [duplicate]

I have a directory with about 2000 files. How can I select a random sample of N files through using either a bash script or a list of piped commands?
Here's a script that uses GNU sort's random option:
ls |sort -R |tail -$N |while read file; do
# Something involving $file, or you can leave
# off the while to just get the filenames
done
You can use shuf (from the GNU coreutils package) for that. Just feed it a list of file names and ask it to return the first line from a random permutation:
ls dirname | shuf -n 1
# probably faster and more flexible:
find dirname -type f | shuf -n 1
# etc..
Adjust the -n, --head-count=COUNT value to return the number of wanted lines. For example to return 5 random filenames you would use:
find dirname -type f | shuf -n 5
Here are a few possibilities that don't parse the output of ls and that are 100% safe regarding files with spaces and funny symbols in their name. All of them will populate an array randf with a list of random files. This array is easily printed with printf '%s\n' "${randf[#]}" if needed.
This one will possibly output the same file several times, and N needs to be known in advance. Here I chose N=42.
a=( * )
randf=( "${a[RANDOM%${#a[#]}]"{1..42}"}" )
This feature is not very well documented.
If N is not known in advance, but you really liked the previous possibility, you can use eval. But it's evil, and you must really make sure that N doesn't come directly from user input without being thoroughly checked!
N=42
a=( * )
eval randf=( \"\${a[RANDOM%\${#a[#]}]\"\{1..$N\}\"}\" )
I personally dislike eval and hence this answer!
The same using a more straightforward method (a loop):
N=42
a=( * )
randf=()
for((i=0;i<N;++i)); do
randf+=( "${a[RANDOM%${#a[#]}]}" )
done
If you don't want to possibly have several times the same file:
N=42
a=( * )
randf=()
for((i=0;i<N && ${#a[#]};++i)); do
((j=RANDOM%${#a[#]}))
randf+=( "${a[j]}" )
a=( "${a[#]:0:j}" "${a[#]:j+1}" )
done
Note. This is a late answer to an old post, but the accepted answer links to an external page that shows terrible bash practice, and the other answer is not much better as it also parses the output of ls. A comment to the accepted answer points to an excellent answer by Lhunath which obviously shows good practice, but doesn't exactly answer the OP.
ls | shuf -n 10 # ten random files
A simple solution for selecting 5 random files while avoiding to parse ls. It also works with files containing spaces, newlines and other special characters:
shuf -ezn 5 * | xargs -0 -n1 echo
Replace echo with the command you want to execute for your files.
This is an even later response to #gniourf_gniourf's late answer, which I just upvoted because it's by far the best answer, twice over. (Once for avoiding eval and once for safe filename handling.)
But it took me a few minutes to untangle the "not very well documented" feature(s) this answer uses. If your Bash skills are solid enough that you saw immediately how it works, then skip this comment. But I didn't, and having untangled it I think it's worth explaining.
Feature #1 is the shell's own file globbing. a=(*) creates an array, $a, whose members are the files in the current directory. Bash understands all the weirdnesses of filenames, so that list is guaranteed correct, guaranteed escaped, etc. No need to worry about properly parsing textual file names returned by ls.
Feature #2 is Bash parameter expansions for arrays, one nested within another. This starts with ${#ARRAY[#]}, which expands to the length of $ARRAY.
That expansion is then used to subscript the array. The standard way to find a random number between 1 and N is to take the value of random number modulo N. We want a random number between 0 and the length of our array. Here's the approach, broken into two lines for clarity's sake:
LENGTH=${#ARRAY[#]}
RANDOM=${a[RANDOM%$LENGTH]}
But this solution does it in a single line, removing the unnecessary variable assignment.
Feature #3 is Bash brace expansion, although I have to confess I don't entirely understand it. Brace expansion is used, for instance, to generate a list of 25 files named filename1.txt, filename2.txt, etc: echo "filename"{1..25}".txt".
The expression inside the subshell above, "${a[RANDOM%${#a[#]}]"{1..42}"}", uses that trick to produce 42 separate expansions. The brace expansion places a single digit in between the ] and the }, which at first I thought was subscripting the array, but if so it would be preceded by a colon. (It would also have returned 42 consecutive items from a random spot in the array, which is not at all the same thing as returning 42 random items from the array.) I think it's just making the shell run the expansion 42 times, thereby returning 42 random items from the array. (But if someone can explain it more fully, I'd love to hear it.)
The reason N has to be hardcoded (to 42) is that brace expansion happens before variable expansion.
Finally, here's Feature #4, if you want to do this recursively for a directory hierarchy:
shopt -s globstar
a=( ** )
This turns on a shell option that causes ** to match recursively. Now your $a array contains every file in the entire hierarchy.
If you have Python installed (works with either Python 2 or Python 3):
To select one file (or line from an arbitrary command), use
ls -1 | python -c "import sys; import random; print(random.choice(sys.stdin.readlines()).rstrip())"
To select N files/lines, use (note N is at the end of the command, replace this by a number)
ls -1 | python -c "import sys; import random; print(''.join(random.sample(sys.stdin.readlines(), int(sys.argv[1]))).rstrip())" N
If you want to copy a sample of those files to another folder:
ls | shuf -n 100 | xargs -I % cp % ../samples/
make samples directory first obviously.
MacOS does not have the sort -R and shuf commands, so I needed a bash only solution that randomizes all files without duplicates and did not find that here. This solution is similar to gniourf_gniourf's solution #4, but hopefully adds better comments.
The script should be easy to modify to stop after N samples using a counter with if, or gniourf_gniourf's for loop with N. $RANDOM is limited to ~32000 files, but that should do for most cases.
#!/bin/bash
array=(*) # this is the array of files to shuffle
# echo ${array[#]}
for dummy in "${array[#]}"; do # do loop length(array) times; once for each file
length=${#array[#]}
randomi=$(( $RANDOM % $length )) # select a random index
filename=${array[$randomi]}
echo "Processing: '$filename'" # do something with the file
unset -v "array[$randomi]" # set the element at index $randomi to NULL
array=("${array[#]}") # remove NULL elements introduced by unset; copy array
done
If you have more files in your folder, you can use the below piped command I found in unix stackexchange.
find /some/dir/ -type f -print0 | xargs -0 shuf -e -n 8 -z | xargs -0 cp -vt /target/dir/
Here I wanted to copy the files, but if you want to move files or do something else, just change the last command where I have used cp.
This is the only script I can get to play nice with bash on MacOS. I combined and edited snippets from the following two links:
ls command: how can I get a recursive full-path listing, one line per file?
http://www.linuxquestions.org/questions/linux-general-1/is-there-a-bash-command-for-picking-a-random-file-678687/
#!/bin/bash
# Reads a given directory and picks a random file.
# The directory you want to use. You could use "$1" instead if you
# wanted to parametrize it.
DIR="/path/to/"
# DIR="$1"
# Internal Field Separator set to newline, so file names with
# spaces do not break our script.
IFS='
'
if [[ -d "${DIR}" ]]
then
# Runs ls on the given dir, and dumps the output into a matrix,
# it uses the new lines character as a field delimiter, as explained above.
# file_matrix=($(ls -LR "${DIR}"))
file_matrix=($(ls -R $DIR | awk '; /:$/&&f{s=$0;f=0}; /:$/&&!f{sub(/:$/,"");s=$0;f=1;next}; NF&&f{ print s"/"$0 }'))
num_files=${#file_matrix[*]}
# This is the command you want to run on a random file.
# Change "ls -l" by anything you want, it's just an example.
ls -l "${file_matrix[$((RANDOM%num_files))]}"
fi
exit 0
I use this: it uses temporary file but goes deeply in a directory until it find a regular file and return it.
# find for a quasi-random file in a directory tree:
# directory to start search from:
ROOT="/";
tmp=/tmp/mytempfile
TARGET="$ROOT"
FILE="";
n=
r=
while [ -e "$TARGET" ]; do
TARGET="$(readlink -f "${TARGET}/$FILE")" ;
if [ -d "$TARGET" ]; then
ls -1 "$TARGET" 2> /dev/null > $tmp || break;
n=$(cat $tmp | wc -l);
if [ $n != 0 ]; then
FILE=$(shuf -n 1 $tmp)
# or if you dont have/want to use shuf:
# r=$(($RANDOM % $n)) ;
# FILE=$(tail -n +$(( $r + 1 )) $tmp | head -n 1);
fi ;
else
if [ -f "$TARGET" ] ; then
rm -f $tmp
echo $TARGET
break;
else
# is not a regular file, restart:
TARGET="$ROOT"
FILE=""
fi
fi
done;
How about a Perl solution slightly doctored from Mr. Kang over here:
How can I shuffle the lines of a text file on the Unix command line or in a shell script?
$ ls | perl -MList::Util=shuffle -e '#lines = shuffle(<>); print
#lines[0..4]'

how to create same line if else statement around wc -l output

I'm not at all familiar with tcsh, so really hoping someone could drop some knowledge on what i'm missing here. I'm trying to build a single lined if else statement that checks the number of rows in a file, and outputs a touch file if the number of rows > 1. I'm checking if rows is greater than 1 because the file can be generated with just header info. (Separately if anyone has any useful online guides that I may use for all things tcsh, that would also be very helpful)
Example file 1 (has data):
title1,title2
data1,data2
Example file 2 (empty):
title1,title2
Expected output:
If file has data, generates a has_data.txt, else does not generate file
What I've tried:
wc -l dummy_file_empty.txt >1 && touch has_data.txt - does not really evaluate greater than
update `` is used for evaluating statements in line, and $output is an array? So needed to reference index 1 to get the line count
set output=`wc -l dummy_file_empty.txt` | if($output[1] >1) touch has_data.txt - returns expression syntax error
if ( wc -l dummy_file_empty.txt ) > 10 touch has_data.txt - returns expression syntax error
i can invoke bash shell as-well if a solution exists in bash ( saw examples where bash is piped at the end of statement |bash and tested it to ensure it works on my machine)
[[ $(cat file.txt | wc -l) -gt 1 ]] && touch has_data.txt
When you use > this will attempt to write to a file. In this case a file named 1 or 10. You want to use -gt which stands for greater than.
If you're running this in a tcsh terminal, then you can invoke this via bash:
bash -c '[[ $(cat file.txt | wc -l) -gt 1 ]] && touch has_data.txt'
Just wanted to add a solution where I've gotten somewhat close..albeit i'm not really able to handle scenarios where the file might not exist. Hopefully somebody has guidance on whether this a good way to do it.
set output=`wc -l file.txt` && if ( $output[1] > 1 ) touch has_data.txt

How can I select random files from a directory in bash?

I have a directory with about 2000 files. How can I select a random sample of N files through using either a bash script or a list of piped commands?
Here's a script that uses GNU sort's random option:
ls |sort -R |tail -$N |while read file; do
# Something involving $file, or you can leave
# off the while to just get the filenames
done
You can use shuf (from the GNU coreutils package) for that. Just feed it a list of file names and ask it to return the first line from a random permutation:
ls dirname | shuf -n 1
# probably faster and more flexible:
find dirname -type f | shuf -n 1
# etc..
Adjust the -n, --head-count=COUNT value to return the number of wanted lines. For example to return 5 random filenames you would use:
find dirname -type f | shuf -n 5
Here are a few possibilities that don't parse the output of ls and that are 100% safe regarding files with spaces and funny symbols in their name. All of them will populate an array randf with a list of random files. This array is easily printed with printf '%s\n' "${randf[#]}" if needed.
This one will possibly output the same file several times, and N needs to be known in advance. Here I chose N=42.
a=( * )
randf=( "${a[RANDOM%${#a[#]}]"{1..42}"}" )
This feature is not very well documented.
If N is not known in advance, but you really liked the previous possibility, you can use eval. But it's evil, and you must really make sure that N doesn't come directly from user input without being thoroughly checked!
N=42
a=( * )
eval randf=( \"\${a[RANDOM%\${#a[#]}]\"\{1..$N\}\"}\" )
I personally dislike eval and hence this answer!
The same using a more straightforward method (a loop):
N=42
a=( * )
randf=()
for((i=0;i<N;++i)); do
randf+=( "${a[RANDOM%${#a[#]}]}" )
done
If you don't want to possibly have several times the same file:
N=42
a=( * )
randf=()
for((i=0;i<N && ${#a[#]};++i)); do
((j=RANDOM%${#a[#]}))
randf+=( "${a[j]}" )
a=( "${a[#]:0:j}" "${a[#]:j+1}" )
done
Note. This is a late answer to an old post, but the accepted answer links to an external page that shows terrible bash practice, and the other answer is not much better as it also parses the output of ls. A comment to the accepted answer points to an excellent answer by Lhunath which obviously shows good practice, but doesn't exactly answer the OP.
ls | shuf -n 10 # ten random files
A simple solution for selecting 5 random files while avoiding to parse ls. It also works with files containing spaces, newlines and other special characters:
shuf -ezn 5 * | xargs -0 -n1 echo
Replace echo with the command you want to execute for your files.
This is an even later response to #gniourf_gniourf's late answer, which I just upvoted because it's by far the best answer, twice over. (Once for avoiding eval and once for safe filename handling.)
But it took me a few minutes to untangle the "not very well documented" feature(s) this answer uses. If your Bash skills are solid enough that you saw immediately how it works, then skip this comment. But I didn't, and having untangled it I think it's worth explaining.
Feature #1 is the shell's own file globbing. a=(*) creates an array, $a, whose members are the files in the current directory. Bash understands all the weirdnesses of filenames, so that list is guaranteed correct, guaranteed escaped, etc. No need to worry about properly parsing textual file names returned by ls.
Feature #2 is Bash parameter expansions for arrays, one nested within another. This starts with ${#ARRAY[#]}, which expands to the length of $ARRAY.
That expansion is then used to subscript the array. The standard way to find a random number between 1 and N is to take the value of random number modulo N. We want a random number between 0 and the length of our array. Here's the approach, broken into two lines for clarity's sake:
LENGTH=${#ARRAY[#]}
RANDOM=${a[RANDOM%$LENGTH]}
But this solution does it in a single line, removing the unnecessary variable assignment.
Feature #3 is Bash brace expansion, although I have to confess I don't entirely understand it. Brace expansion is used, for instance, to generate a list of 25 files named filename1.txt, filename2.txt, etc: echo "filename"{1..25}".txt".
The expression inside the subshell above, "${a[RANDOM%${#a[#]}]"{1..42}"}", uses that trick to produce 42 separate expansions. The brace expansion places a single digit in between the ] and the }, which at first I thought was subscripting the array, but if so it would be preceded by a colon. (It would also have returned 42 consecutive items from a random spot in the array, which is not at all the same thing as returning 42 random items from the array.) I think it's just making the shell run the expansion 42 times, thereby returning 42 random items from the array. (But if someone can explain it more fully, I'd love to hear it.)
The reason N has to be hardcoded (to 42) is that brace expansion happens before variable expansion.
Finally, here's Feature #4, if you want to do this recursively for a directory hierarchy:
shopt -s globstar
a=( ** )
This turns on a shell option that causes ** to match recursively. Now your $a array contains every file in the entire hierarchy.
If you have Python installed (works with either Python 2 or Python 3):
To select one file (or line from an arbitrary command), use
ls -1 | python -c "import sys; import random; print(random.choice(sys.stdin.readlines()).rstrip())"
To select N files/lines, use (note N is at the end of the command, replace this by a number)
ls -1 | python -c "import sys; import random; print(''.join(random.sample(sys.stdin.readlines(), int(sys.argv[1]))).rstrip())" N
If you want to copy a sample of those files to another folder:
ls | shuf -n 100 | xargs -I % cp % ../samples/
make samples directory first obviously.
MacOS does not have the sort -R and shuf commands, so I needed a bash only solution that randomizes all files without duplicates and did not find that here. This solution is similar to gniourf_gniourf's solution #4, but hopefully adds better comments.
The script should be easy to modify to stop after N samples using a counter with if, or gniourf_gniourf's for loop with N. $RANDOM is limited to ~32000 files, but that should do for most cases.
#!/bin/bash
array=(*) # this is the array of files to shuffle
# echo ${array[#]}
for dummy in "${array[#]}"; do # do loop length(array) times; once for each file
length=${#array[#]}
randomi=$(( $RANDOM % $length )) # select a random index
filename=${array[$randomi]}
echo "Processing: '$filename'" # do something with the file
unset -v "array[$randomi]" # set the element at index $randomi to NULL
array=("${array[#]}") # remove NULL elements introduced by unset; copy array
done
If you have more files in your folder, you can use the below piped command I found in unix stackexchange.
find /some/dir/ -type f -print0 | xargs -0 shuf -e -n 8 -z | xargs -0 cp -vt /target/dir/
Here I wanted to copy the files, but if you want to move files or do something else, just change the last command where I have used cp.
This is the only script I can get to play nice with bash on MacOS. I combined and edited snippets from the following two links:
ls command: how can I get a recursive full-path listing, one line per file?
http://www.linuxquestions.org/questions/linux-general-1/is-there-a-bash-command-for-picking-a-random-file-678687/
#!/bin/bash
# Reads a given directory and picks a random file.
# The directory you want to use. You could use "$1" instead if you
# wanted to parametrize it.
DIR="/path/to/"
# DIR="$1"
# Internal Field Separator set to newline, so file names with
# spaces do not break our script.
IFS='
'
if [[ -d "${DIR}" ]]
then
# Runs ls on the given dir, and dumps the output into a matrix,
# it uses the new lines character as a field delimiter, as explained above.
# file_matrix=($(ls -LR "${DIR}"))
file_matrix=($(ls -R $DIR | awk '; /:$/&&f{s=$0;f=0}; /:$/&&!f{sub(/:$/,"");s=$0;f=1;next}; NF&&f{ print s"/"$0 }'))
num_files=${#file_matrix[*]}
# This is the command you want to run on a random file.
# Change "ls -l" by anything you want, it's just an example.
ls -l "${file_matrix[$((RANDOM%num_files))]}"
fi
exit 0
I use this: it uses temporary file but goes deeply in a directory until it find a regular file and return it.
# find for a quasi-random file in a directory tree:
# directory to start search from:
ROOT="/";
tmp=/tmp/mytempfile
TARGET="$ROOT"
FILE="";
n=
r=
while [ -e "$TARGET" ]; do
TARGET="$(readlink -f "${TARGET}/$FILE")" ;
if [ -d "$TARGET" ]; then
ls -1 "$TARGET" 2> /dev/null > $tmp || break;
n=$(cat $tmp | wc -l);
if [ $n != 0 ]; then
FILE=$(shuf -n 1 $tmp)
# or if you dont have/want to use shuf:
# r=$(($RANDOM % $n)) ;
# FILE=$(tail -n +$(( $r + 1 )) $tmp | head -n 1);
fi ;
else
if [ -f "$TARGET" ] ; then
rm -f $tmp
echo $TARGET
break;
else
# is not a regular file, restart:
TARGET="$ROOT"
FILE=""
fi
fi
done;
How about a Perl solution slightly doctored from Mr. Kang over here:
How can I shuffle the lines of a text file on the Unix command line or in a shell script?
$ ls | perl -MList::Util=shuffle -e '#lines = shuffle(<>); print
#lines[0..4]'

Resources