My current cross reference field show all the record references it gets in Child records. I want to limit it to 5. How can this be done in RSA archer
Navigate to the application/ questionnaire where your field exists. Within the cross reference field you’d like to update, navigate to the option tab and all the way at the bottom there is a ‘Configuration’ section. Within that there is a ‘Default Records Display’ with values ranging from 5-50 ( in increments of 5) and All. Changing your cross references to 5 should achieve what you’re looking to do.
Well Gupta, that depends on if you can filter the records down to a specific amount. Currently Archer cannot just return the "top 5" records.
Related
I'm testing Kibana 4 for a project.
I have created an index from my database table which is composed by 3 fields:
Date
User
Action
I would like to display my index as a simple table (3 column, N rows) in my dashboard.
I tried to use "Data table" visualization but I can't find a way to display my results without any Metrics (Count, Sum etc...)
Maybe is pretty simple and I missed something... is there a way to do this?
Regards,
On the Discover tab, create a view that has just the fields you want and then save that as a search.
On the Dashboard tab, click on Edit then hit the + Create new button to add a widget, but if you look at the top, there's a Searches tab. Select that and add your saved search in.
[Elastic 7.x / 2019 Update]
I was a bit confused when I read #Alcanzar's answer so I am sharing a little more noob-friendly step-by-step how-to here :
STEP 1 : Create the Index Pattern
STEP 2 : Go to the Dashboard view, and create a view on your index
Select each column you want to include/add in your view by clicking "add" on it (The confusing part is that until you do that, you will have a "scrambled" view listing everything in a jumbled way.)
STEP 3 : Go to the Dashboard view, and create a view on your index
The trick is to select the specific columns you want to include... and voila !
Don't forget to save your view, this will help a lot in the process.
In Kibana 7.5.0 you can do it as follows:
Go to Discover section
Select fields you are interested in
Click on Save to save your discover search so you can use it in visualizations and dashboards
Click on Dashboard and create a new dashboard
Click on Add and select the panel
There is no step 6
The accepted solution has its pros (if, for simplicity, you see your index as a table, this is the only way to deal with rows naturally) but also cons (it allows the user to see too much information, by expanding the records that appear in the table; users cannot get an export of the values).
So if you plan to build tables to use in reports seen by users which should not see everthing and may want to get exports of the data, I recommend a different (hacky) approach using Table visualizations:
Say you have three columns A, B and C:
If there are no duplicates considering the combined values of A and B, you can use these two vales as aggregation fields, and then set a Max or Top hit Metric for C.
If even A, B and C have duplicates, then you can use the three of them as aggregation fields and add a Metric count, that will give you the number of repeated rows. This solution makes somehow sense, because instead of repeating the same row 'n' times you just tells you should have repeated 'n' times that row.
If A and B have duplicates but A, B and C are unique, then there is, afaik, no elegant solution. You have to use the three of them as aggregation fields, but then you would have a dummy metric at the end (e.g. count, always equal to 1).
Why? why do we have to go through all of this? that is another question...
I'm testing Kibana 4 for a project.
I have created an index from my database table which is composed by 3 fields:
Date
User
Action
I would like to display my index as a simple table (3 column, N rows) in my dashboard.
I tried to use "Data table" visualization but I can't find a way to display my results without any Metrics (Count, Sum etc...)
Maybe is pretty simple and I missed something... is there a way to do this?
Regards,
On the Discover tab, create a view that has just the fields you want and then save that as a search.
On the Dashboard tab, click on Edit then hit the + Create new button to add a widget, but if you look at the top, there's a Searches tab. Select that and add your saved search in.
[Elastic 7.x / 2019 Update]
I was a bit confused when I read #Alcanzar's answer so I am sharing a little more noob-friendly step-by-step how-to here :
STEP 1 : Create the Index Pattern
STEP 2 : Go to the Dashboard view, and create a view on your index
Select each column you want to include/add in your view by clicking "add" on it (The confusing part is that until you do that, you will have a "scrambled" view listing everything in a jumbled way.)
STEP 3 : Go to the Dashboard view, and create a view on your index
The trick is to select the specific columns you want to include... and voila !
Don't forget to save your view, this will help a lot in the process.
In Kibana 7.5.0 you can do it as follows:
Go to Discover section
Select fields you are interested in
Click on Save to save your discover search so you can use it in visualizations and dashboards
Click on Dashboard and create a new dashboard
Click on Add and select the panel
There is no step 6
The accepted solution has its pros (if, for simplicity, you see your index as a table, this is the only way to deal with rows naturally) but also cons (it allows the user to see too much information, by expanding the records that appear in the table; users cannot get an export of the values).
So if you plan to build tables to use in reports seen by users which should not see everthing and may want to get exports of the data, I recommend a different (hacky) approach using Table visualizations:
Say you have three columns A, B and C:
If there are no duplicates considering the combined values of A and B, you can use these two vales as aggregation fields, and then set a Max or Top hit Metric for C.
If even A, B and C have duplicates, then you can use the three of them as aggregation fields and add a Metric count, that will give you the number of repeated rows. This solution makes somehow sense, because instead of repeating the same row 'n' times you just tells you should have repeated 'n' times that row.
If A and B have duplicates but A, B and C are unique, then there is, afaik, no elegant solution. You have to use the three of them as aggregation fields, but then you would have a dummy metric at the end (e.g. count, always equal to 1).
Why? why do we have to go through all of this? that is another question...
I am creating a database for software product keys at work which means having to document every product key in notes. I want to be able to say in a column how many of these product keys are assigned and how many are not. I have assigned a basic binary value to every form which can either make it assigned or not and leads to give the form a structure such as this ( the keys are false obviously)
I want to add a line next to Office 2013 that says XX Assigned, XX Unassigned for instance and I want this to work across every possible product I add to the database. Any ideas?
I am not sure that it is possible exactly as you wanted.
After "Assigned" column add a column, with 1 set as the column value (look at the picture below).
Open the second tab of the created column and set "Totals" to "Total" and check "Hide detail rows".
In this case just after "Assigned" column there will be a column with number of entries, which belong to this category.
I have a report that is listing students and I want a column to edit a student. I've done so by following this answer:
How do you add an edit button to each row in a report in Oracle APEX?
However, I can only seem to pass 3 items and there's no option to add more. I took a screenshot to explain more:
I need to pass 8 values, how can I do that?
Thanks!
Normally, for this you would only pass the Primary Key columns (here looks like #RECORD_NUMBER# only). The page that you send the person to would then load the form based on the primary key lookup only. If multiple users were using this application, you would want the edit form to always retrieve the current values of the database, not what happened to be on the screen when a particular person ran a certain report.
Change the Target type to URL.
Apex will format what to already have into a URL text field which magically appears between Tem3 and Page Checksum.
All you need to do is to add your new items and values in the appropriate places in the URL.
I found a workaround, at least it was useful to my scenario.
I have an IR page, query returns 4 columns, lets say: ID, DESCRIPTION, SOME_NUMBER,SOME_NUMBER2.
ID NUMBER(9), DESCRIPTION VARCHAR2(30), SOME_NUMBER NUMBER(1), SOME_NUMBER2 NUMBER(3).
What I did was, to setup items this way:
P11_ITEM1-->#ID#
P11_ITEM2-->#DESCRIPTION#
P11_ITEM3-->#SOME_NUMBER##SOME_NUMBER2#
Previous data have been sent to page 11.
In page 11, all items are display only items.
And P11_ITEM3 actually received two concatenated values.
For example, the calling page has columns SOME_NUMER=4 and SOME_NUMBER2=150
so, in pag1 11, P11_ITEM3 shows 4150
In page 11 I created a Before Footer process (pl/sql expression)
to set up new items, for example P11_N1 as source SUBSTR(P11_ITEM3,1,1)
and item P11_N2 as source SUBSTR(P11_ITEM3,2,3)
So, I had those items with corresponding values from the calling IR page.
The reason I did not pass the primary key only for new lookup access, is because i do not want to stress database performing new queries since all data are already loaded into page items. I've been an oracle DBA for twenty years and I know there is no need to re execute queries if you already have the information somewhere else.
These workarounds are not very useful for a product that bills itself as a RAD tool.
Just include a single quoted word in the select statement (Select col1, 'Randomword', col2 from table 1;)
Then define that column as a link and bingo! More items than 3 to select.
I'm working on a VB6 program that connects to a SQL Server 2008 R2 database. In the past I have always used the MSFlexGrid control and populated it manually. Now, however, the guy who is paying me for this wants me to use data-bound grids instead, which forces me to use the MSHFlexGrid control because I'm using ADO and not DAO. So, I have two questions...
First, how would I move a column in a MSHFlexGrid? For example, if I wanted the third column to appear as the sixth column in the grid, is there a simple single line of code that would do that?
Second, believe it or not, I've never had to do anything in a grid other than display the data, as is, from a recordset. Now, however, I have a recordset with some fields that contain just ID numbers that refer to records in other files - for example, a field containing an ID number referring to a record in the Customers table, instead of the field containing the customer's name. What is the easiest way to, instead of having a column showing customer ID numbers from the recordset, having that column show customer names? I thought I read somewhere that there's a way to embed a sql command in a MSHFlexGrid column, but if there is I wouldn't know how to do it. Is this possible, or is there a simpler way to do it?
TIA,
Kevin
The column order would typically be handled by your SELECT statement.
Say you have a Pies table that has a FruitID foreign key related to the FruitID in a Fruits table:
SELECT PieID AS ID, Pie, Fruit FROM Pies LEFT OUTER JOIN Fruits
ON Pies.FruitID = Fruits.FruitID
This returns 3 items: ID, Pie, and Fruit in that order.
Moving columns after the query/display operation is rarely used, but yes ColPosition can be used for that.
Wow! VB6.... Back to the future! :-)
You can move Columns using the ColPosition Property.
This article shows how you could setup the grid to display hierarchical data.
If you just want to display the customer name on the same line as the main data then that is doable as well by just creating the proper SQL for your data source. For that matter you can control the column order the same way as well.
Now, how about considering upgrading to .Net? Just kidding..... No, I'm not. OK. I am, maybe. :-)