Hello everyone,
#!/bin/sh
inotifywait -e move,create /home/importantdirectory|
while read path action file;
do
*do something here*
done
I have this script running to watch the directory and then sends an email notification. When I run it, it seems to run twice, as in I receive the email notification twice. I removed the email notification code and put some simple echos inside. Still I get it 2 times. How can I see if this folder is being watched more than once. I was running it nohup ./execscript > /dev/null 2>&1 &
I shutdown the script and ran it ./execscript and I indeed see it execute once and then seconds later a 2nd time before its done. Also can I see if the number of watches on that directory and the scripts watching it?
Any help is appreciated.
Thank you
Edit: actually, I noticed in my command log that I have run nohup ./execscript > /dev/null 2>&1 & multiple times. could the same script be running more than once if you issue the command above ?
Related
I have a script (lets call it parent.sh) that makes 2 calls to a second script (child.sh) that runs a java process. The child.sh scripts are run in the background by placing an & at the end of the line in parent.sh. However, when i run parent.sh, i need to press Ctrl+C to return to the terminal screen. What is the reason for this? Is it something to do with the fact that the child.sh processes are running under the parent.sh process. So the parent.sh doesn't die until the childs do?
parent.sh
#!/bin/bash
child.sh param1a param2a &
child.sh param1b param2b &
exit 0
child.sh
#!/bin/bash
java com.test.Main
echo "Main Process Stopped" | mail -s "WARNING-Main Process is down." user#email.com
As you can see, I don't want to run the java process in the background because i want to send a mail out when the process dies. Doing it as above works fine from a functional standpoint, but i would like to know how i can get it to return to the terminal after executing parent.sh.
What i ended up doing was to make to change parent.sh to the following
#!/bin/bash
child.sh param1a param2a > startup.log &
child.sh param1b param2b > startup2.log &
exit 0
I would not have come to this solution without your suggestions and root cause analysis of the issue. Thanks!
And apologies for my inaccurate comment. (There was no input, I answered from memory and I remembered incorrectly.)
The following link from the Linux Documentation Project suggests adding a wait after your mail command in child.sh:
http://tldp.org/LDP/abs/html/x9644.html
Summary of the above document
Within a script, running a command in the background with an ampersand (&)
may cause the script to hang until ENTER is hit. This seems to occur with
commands that write to stdout. It can be a major annoyance.
....
....
As Walter Brameld IV explains it:
As far as I can tell, such scripts don't actually hang. It just
seems that they do because the background command writes text to
the console after the prompt. The user gets the impression that
the prompt was never displayed. Here's the sequence of events:
Script launches background command.
Script exits.
Shell displays the prompt.
Background command continues running and writing text to the
console.
Background command finishes.
User doesn't see a prompt at the bottom of the output, thinks script
is hanging.
If you change child.sh to look like the following you shouldn't experience this annoyance:
#!/bin/bash
java com.test.Main
echo "Main Process Stopped" | mail -s "WARNING-Main Process is down." user#gmail.com
wait
Or as #SebastianStigler states in a comment to your question above:
Add a > /dev/null at the end of the line with mail. mail will otherwise try to start its interactive mode.
This will cause the mail command to write to /dev/null rather than stdout which should also stop this annoyance.
Hope this helps
The process was still linked to the controlling terminal because STDOUT needs somewhere to go. You solved that problem by redirecting to a file ( > startup.log ).
If you're not interested in the output, discard STDOUT completely ( >/dev/null ).
If you're not interested in errors, either, discard both ( &>/dev/null ).
If you want the processes to keep running even after you log out of your terminal, use nohup — that effectively disconnects them from what you are doing and leaves them to quietly run in the background until you reboot your machine (or otherwise kill them).
nohup child.sh param1a param2a &>/dev/null &
Ive got a script that takes a quite a long time to run, as it has to handle many thousands of files. I want to make this script as fool proof as possible. To this end, I want to check if the user ran the script using nohup and '&'. E.x.
me#myHost:/home/me/bin $ nohup doAlotOfStuff.sh &. I want to make 100% sure the script was run with nohup and '&', because its a very painful recovery process if the script dies in the middle for whatever reason.
How can I check those two key paramaters inside the script itself? and if they are missing, how can I stop the script before it gets any farther, and complain to the user that they ran the script wrong? Better yet, is there way I can force the script to run in nohup &?
Edit: the server enviornment is AIX 7.1
The ps utility can get the process state. The process state code will contain the character + when running in foreground. Absence of + means code is running in background.
However, it will be hard to tell whether the background script was invoked using nohup. It's also almost impossible to rely on the presence of nohup.out as output can be redirected by user elsewhere at will.
There are 2 ways to accomplish what you want to do. Either bail out and warn the user or automatically restart the script in background.
#!/bin/bash
local mypid=$$
if [[ $(ps -o stat= -p $mypid) =~ "+" ]]; then
echo Running in foreground.
exec nohup $0 "$#" &
exit
fi
# the rest of the script
...
In this code, if the process has a state code +, it will print a warning then restart the process in background. If the process was started in the background, it will just proceed to the rest of the code.
If you prefer to bailout and just warn the user, you can remove the exec line. Note that the exit is not needed after exec. I left it there just in case you choose to remove the exec line.
One good way to find if a script is logging to nohup, is to first check that the nohup.out exists, and then to echo to it and ensure that you can read it there. For example:
echo "complextag"
if ( $(cat nohup.out | grep "complextag" ) != "complextag" );then
# various commands complaining to the user, then exiting
fi
This works because if the script's stdout is going to nohup.out, where they should be going (or whatever out file you specified), then when you echo that phrase, it should be appended to the file nohup.out. If it doesn't appear there, then the script was nut run using nohup and you can scold them, perhaps by using a wall command on a temporary broadcast file. (if you want me to elaborate on that I can).
As for being run in the background, if it's not running you should know by checking nohup.
I have a VM that I want running indefinitely. The server is always running but I want the script to keep running after I log out. How would I go about doing so? Creating a cron job?
In general the following steps are sufficient to convince most Unix shells that the process you're launching should not depend on the continued existence of the shell:
run the command under nohup
run the command in the background
redirect all file descriptors that normally point to the terminal to other locations
So, if you want to run command-name, you should do it like so:
nohup command-name >/dev/null 2>/dev/null </dev/null &
This tells the process that will execute command-name to send all stdout and stderr to nowhere (instead of to your terminal) and also to read stdin from nowhere (instead of from your terminal). Of course if you actually have locations to write to/read from, you can certainly use those instead -- anything except the terminal is fine:
nohup command-name >outputFile 2>errorFile <inputFile &
See also the answer in Petur's comment, which discusses this issue a fair bit.
I have a script (lets call it parent.sh) that makes 2 calls to a second script (child.sh) that runs a java process. The child.sh scripts are run in the background by placing an & at the end of the line in parent.sh. However, when i run parent.sh, i need to press Ctrl+C to return to the terminal screen. What is the reason for this? Is it something to do with the fact that the child.sh processes are running under the parent.sh process. So the parent.sh doesn't die until the childs do?
parent.sh
#!/bin/bash
child.sh param1a param2a &
child.sh param1b param2b &
exit 0
child.sh
#!/bin/bash
java com.test.Main
echo "Main Process Stopped" | mail -s "WARNING-Main Process is down." user#email.com
As you can see, I don't want to run the java process in the background because i want to send a mail out when the process dies. Doing it as above works fine from a functional standpoint, but i would like to know how i can get it to return to the terminal after executing parent.sh.
What i ended up doing was to make to change parent.sh to the following
#!/bin/bash
child.sh param1a param2a > startup.log &
child.sh param1b param2b > startup2.log &
exit 0
I would not have come to this solution without your suggestions and root cause analysis of the issue. Thanks!
And apologies for my inaccurate comment. (There was no input, I answered from memory and I remembered incorrectly.)
The following link from the Linux Documentation Project suggests adding a wait after your mail command in child.sh:
http://tldp.org/LDP/abs/html/x9644.html
Summary of the above document
Within a script, running a command in the background with an ampersand (&)
may cause the script to hang until ENTER is hit. This seems to occur with
commands that write to stdout. It can be a major annoyance.
....
....
As Walter Brameld IV explains it:
As far as I can tell, such scripts don't actually hang. It just
seems that they do because the background command writes text to
the console after the prompt. The user gets the impression that
the prompt was never displayed. Here's the sequence of events:
Script launches background command.
Script exits.
Shell displays the prompt.
Background command continues running and writing text to the
console.
Background command finishes.
User doesn't see a prompt at the bottom of the output, thinks script
is hanging.
If you change child.sh to look like the following you shouldn't experience this annoyance:
#!/bin/bash
java com.test.Main
echo "Main Process Stopped" | mail -s "WARNING-Main Process is down." user#gmail.com
wait
Or as #SebastianStigler states in a comment to your question above:
Add a > /dev/null at the end of the line with mail. mail will otherwise try to start its interactive mode.
This will cause the mail command to write to /dev/null rather than stdout which should also stop this annoyance.
Hope this helps
The process was still linked to the controlling terminal because STDOUT needs somewhere to go. You solved that problem by redirecting to a file ( > startup.log ).
If you're not interested in the output, discard STDOUT completely ( >/dev/null ).
If you're not interested in errors, either, discard both ( &>/dev/null ).
If you want the processes to keep running even after you log out of your terminal, use nohup — that effectively disconnects them from what you are doing and leaves them to quietly run in the background until you reboot your machine (or otherwise kill them).
nohup child.sh param1a param2a &>/dev/null &
So, I have a long running script (of order few days) say execute.sh which I am planning to execute on a server on which I have a user account...
Now, I want to execute this script so that it runs forever even if I logoff or disconnect from the server??
How do i do that?
THanks
You have a couple of choices. The most basic would be to use nohup:
nohup ./execute.sh
nohup executes the command as a child process and detaches from terminal and continues running if it receives SIGHUP. This signal means sig hangup and will getting triggered if you close a terminal and a process is still attached to it.
The output of the process will getting redirected to a file, per default nohup.out located in the current directory.
You may also use bash's disown functionality. You can start a script in bash:
./execute.sh
Then press Ctrl+z and then enter:
disown
The process will now run in background, detached from the terminal. If you care about the scripts output you may redirect output to a logfile:
./execute.sh > execute.log 2>&1
Another option would be to install screen on the remote machine, run the command in a screen session and detach from it. You'll find a lot of tutorials about this.
nohup (no hangup) it and run it in the background:
nohup execute.sh &
Output that normally would have gone to the screen (STDOUT) will go to a file called nohup.out.