My use case is I have to access AWS ec2 instances through a jumpbox.
Here is my SSH config.
Host awsjumpbox
User sshuser
HostName jumpboxhostname
IdentityFile /Users/myusername/.ssh/id_rsa
LocalForward 8022 10.0.168.43:22
It works when I do SCP command to copy files to the EC2 instance.
myusername % scp -r -i ~/aws/aws-keypair.pem -P 8022 * ec2-user#localhost:testdir
The authenticity of host '[localhost]:8022 ([::1]:8022)' can't be established.
ECDSA key fingerprint is SHA256:rrwr62yjP2cgUTT9SowdlrIwGi4jMMwt5x4Aj6E4Y3Y.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '[localhost]:8022' (ECDSA) to the list of known hosts.
/etc/profile.d/lang.sh: line 19: warning: setlocale: LC_CTYPE: cannot change locale (UTF-8): No such file or directory
README.md 100% 1064 24.3KB/s 00:00
However, when I executed SSH command. It returns a strange IP address.
myusername % ssh -i ~/aws/aws-keypair.pem -P 8022 ec2-user#localhost
ssh: connect to host 0.0.31.86 port 22: No route to host
What is the cause of this issue? How do I fix it?
Thank you.
Don't use LocalForward and reverse the flow.
Use ProxyCommand or ProxyJump. This will allow SSH to open a session to your bastion server transparently.
E.g. your configuration should be something in the line of
Host 10.0.168.43
User root
ProxyCommand ssh -W %h:%p sshuser#awsjumpbox
...
or
Host 10.0.168.43
User root
ProxyJump sshuser#awsjumpbox
...
I have an alias to a server machine:
alias myserver='user#server'
however, I cannot ssh into it by using the alias:
ssh myserver
ssh: Could not resolve hostname myserver: Name or service not known
the alias is correctly set:
myserver
returns bash: user#server: command not found.
Obviously, it works when I do it extensively:
ssh user#server
what is going on? I am pretty sure it has been working until today... But not sure what I changed.
Any help?
you can either have an Alias in your bash configuration which includes the actual ssh command aswell ...
alias myserver='ssh user#myserver'
... or have an alias in your ssh config file.
Host myserver
HostName 10.10.20.20
User user
ssh myserver should work.
A more extensive answer can be found for example here.
Not sure about the alias, but I use ~/.ssh/config:
Host myserver
HostName server
User user
Port 22
Then ssh myserver is just like your alias for ssh user#server.
I have a complex SSH tunnel problem I'm trying to solve and can't seem to get it quite right.
Simply put:
ME -> Bastion:22 -> Instance:8500
Bastion uses a different username and key than instance. I would like to be able to access port 1234 on instance from localhost:1234
Right now I have the following:
Host bastion
HostName bastion.example.com
ForwardAgent yes
IdentityFile ~/.ssh/id_ecdsa
User spanky
Host internal
ForwardAgent yes
HostName consul.internal
IdentityFile ~/.ssh/aws.pem
ProxyJump bastion
User ec2-user
Port 8500
But I don't think I've got it.
The following two commands work, but I'm trying to distill them into a working config:
ssh -L 2222:10.0.0.42:22 bastion.example.com -N -i ~/.ssh/id_ecdsa
ssh -L 8500:localhost:8500 ec2-user#localhost -N -i ~/.ssh/aws.pem -p 2222
With a current version of ssh, you should be able to use:
ssh -L1234:localhost:1234 -J spanky#bastion.example.com ec2-user#consul.internal
From man ssh:
-J destination
Connect to the target host by first making a ssh
connection to the jump host described by destination and then
establishing a TCP forwarding to the ultimate destination from there.
Multiple jump hops may be specified separated by comma characters.
This is a shortcut to specify a ProxyJump configuration directive.
I wonder if there is a way for me to SCP the file from remote2 host directly from my local machine by going through a remote1 host.
The networks only allow connections to remote2 host from remote1 host. Also, neither remote1 host nor remote2 host can scp to my local machine.
Is there something like:
scp user1#remote1:user2#remote2:file .
First window: ssh remote1, then scp remot2:file ..
Second shell: scp remote1:file .
First window: rm file; logout
I could write a script to do all these steps, but if there is a direct way, I would rather use it.
Thanks.
EDIT: I am thinking something like opening SSH tunnels but i'm confused on what value to put where.
At the moment, to access remote1, i have the following in $HOME/.ssh/config on my local machine.
Host remote1
User user1
Hostname localhost
Port 45678
Once on remote1, to access remote2, it's the standard local DNS and port 22. What should I put on remote1 and/or change on localhost?
I don't know of any way to copy the file directly in one single command, but if you can concede to running an SSH instance in the background to just keep a port forwarding tunnel open, then you could copy the file in one command.
Like this:
# First, open the tunnel
ssh -L 1234:remote2:22 -p 45678 user1#remote1
# Then, use the tunnel to copy the file directly from remote2
scp -P 1234 user2#localhost:file .
Note that you connect as user2#localhost in the actual scp command, because it is on port 1234 on localhost that the first ssh instance is listening to forward connections to remote2. Note also that you don't need to run the first command for every subsequent file copy; you can simply leave it running.
Double ssh
Even in your complex case, you can handle file transfer using a single command line, simply with ssh ;-)
And this is useful if remote1 cannot connect to localhost:
ssh user1#remote1 'ssh user2#remote2 "cat file"' > file
tar
But you loose file properties (ownership, permissions...).
However, tar is your friend to keep these file properties:
ssh user1#remote1 'ssh user2#remote2 "cd path2; tar c file"' | tar x
You can also compress to reduce network bandwidth:
ssh user1#remote1 'ssh user2#remote2 "cd path2; tar cj file"' | tar xj
And tar also allows you transferring a recursive directory through basic ssh:
ssh user1#remote1 'ssh user2#remote2 "cd path2; tar cj ."' | tar xj
ionice
If the file is huge and you do not want to disturb other important network applications, you may miss network throughput limitation provided by scp and rsync tools (e.g. scp -l 1024 user#remote:file does not use more than 1 Mbits/second).
But, a workaround is using ionice to keep a single command line:
ionice -c2 -n7 ssh u1#remote1 'ionice -c2 -n7 ssh u2#remote2 "cat file"' > file
Note: ionice may not be available on old distributions.
This will do the trick:
scp -o 'Host remote2' -o 'ProxyCommand ssh user#remote1 nc %h %p' \
user#remote2:path/to/file .
To SCP the file from the host remote2 directly, add the two options (Host and ProxyCommand) to your ~/.ssh/config file (see also this answer on superuser). Then you can run:
scp user#remote2:path/to/file .
from your local machine without having to think about remote1.
With openssh version 7.3 and up it is easy. Use ProxyJump option in the config file.
# Add to ~/.ssh/config
Host bastion
Hostname bastion.client.com
User userForBastion
IdentityFile ~/.ssh/bastion.pem
Host appMachine
Hostname appMachine.internal.com
User bastion
ProxyJump bastion # openssh 7.3 version new feature ProxyJump
IdentityFile ~/.ssh/appMachine.pem. #no need to copy pem file to bastion host
Commands to run to login or copy
ssh appMachine # no need to specify any tunnel.
scp helloWorld.txt appMachine:. # copy without intermediate jumphost/bastion host copy.**
ofcourse you can specify bastion Jump host using option "-J" to ssh command, if not configured in config file.
Note scp does not seems to support "-J" flag as of now. (i could not find in man pages. However above scp works with config file setting)
There is a new option in scp that add recently for exactly this same job that is very convenient, it is -3.
TL;DR For the current host that has authentication already set up in ssh config files, just do:
scp -3 remote1:file remote2:file
Your scp must be from recent versions.
All other mentioned technique requires you to set up authentication from remote1 to remote2 or vice versa, which not always is a good idea.
Argument -3 means you want to move files from two remote hosts by using current host as intermediary, and this host actually does the authentication to both remote hosts, so they don't have to have access to each other.
You just have to setup authentication in ssh config files, which is fairly easy and well documented, and then just run the command in TL;DR
The source for this answer is https://superuser.com/a/686527/713762
This configuration works nice for me:
Host jump
User username
Hostname jumphost.yourorg.intranet
Host production
User username
Hostname production.yourorg.intranet
ProxyCommand ssh -q -W %h:%p jump
Then the command
scp myfile production:~
Copies myfile to production machine.
a simpler way:
scp -o 'ProxyJump your.jump.host' /local/dir/myfile.txt remote.internal.host:/remote/dir
I use some code connecting with remote machine with use of paramiko library. The connection is established over tunnelling ssh connection bound to one of the localhost ports. The default shell on the remote machine is tcsh, but my code requires it to run bash. I have tested the sshing some simple commands and it works fine.
$ ssh localhost -p 2222 'echo $0'
tcsh
To change the login shell I have added to my .tcshrc file following two lines:
setenv SHELL /bin/bash
exec /bin/bash --login
The following thing works:
$ ssh localhost -p 2222
[user#remote ~]$ echo $0
/bin/bash
But not the following:
$ ssh localhost -p 2222 'echo $0'
which gives no response. The same for the connections with paramiko established by the code I want to use.
At the moment I am limited only to user-level solutions and would rather not play with the paramiko-using-code itself. Is there anything else I could try here?