I am trying to load 2k records on azure service bus queue through informatica, but getting timeout exception. The connection is working file for 700 records, successfully loading on queue.
I have created JMS and JNDI connection and is working fine if number of records are less.
Error:
2020-05-04 23:27:28 : ERROR : (3084 | WRITER_1__1) : (IS | PC_INT_EE_QA) : node01_lxinfaeeqa1 : JAVA PLUGIN_1762 : [ERROR] JMS writer encountered a JMS exception: Timed out while waiting to get credit to sendException Stack: javax.jms.JMSException: Timed out while waiting to get credit to send
at org.apache.qpid.amqp_1_0.jms.impl.MessageProducerImpl.send(MessageProducerImpl.java:331)
at com.informatica.powerconnect.jms.server.writer.JMSMessageWriter$QueueWriter.writeMessage(JMSMessageWriter.java:93)
at com.informatica.powerconnect.jms.server.writer.JMSWriterPartitionDriver.execute(JMSWriterPartitionDriver.java:401)
Linked Exception Stack: java.util.concurrent.TimeoutException
at org.apache.qpid.amqp_1_0.transport.ConnectionEndpoint.waitUntil(ConnectionEndpoint.java:1232)
at org.apache.qpid.amqp_1_0.transport.SessionEndpoint.waitUntil(SessionEndpoint.java:686)
at org.apache.qpid.amqp_1_0.transport.LinkEndpoint.waitUntil(LinkEndpoint.java:360)
at org.apache.qpid.amqp_1_0.client.Sender.send(Sender.java:320)
at org.apache.qpid.amqp_1_0.jms.impl.MessageProducerImpl.send(MessageProducerImpl.java:321)
at com.informatica.powerconnect.jms.server.writer.JMSMessageWriter$QueueWriter.writeMessage(JMSMessageWriter.java:93)
at com.informatica.powerconnect.jms.server.writer.JMSWriterPartitionDriver.execute(JMSWriterPartitionDriver.java:401)
.
2020-05-04 23:27:28 : ERROR : (3084 | WRITER_1__1) : (IS | PC_INT_EE_QA) : node01_lxinfaeeqa1 : JAVA PLUGIN_1762 : [ERROR] at com.informatica.powerconnect.jms.server.writer.JMSWriterPartitionDriver.execute(JMSWriterPartitionDriver.java:431)
2020-05-04 23:27:28 : ERROR : (3084 | WRITER_1__1) : (IS | PC_INT_EE_QA) : node01_lxinfaeeqa1 : SDKS_38502 : Plug-in #300800's target [Target_jms: Partition 1] failed in method [execute].
2020-05-04 23:27:28 : INFO : (3084 | WRITER_1__1) : (IS | PC_INT_EE_QA) : node01_lxinfaeeqa1 : WRT_8333 : Rolling back all the targets due to fatal session error.
2020-05-04 23:28:28 : INFO : (3084 | WRITER_1__1) : (IS | PC_INT_EE_QA) : node01_lxinfaeeqa1 : WRT_8325 : Final rollback executed for the target [Target_jms] at end of load
2020-05-04 23:28:28 : ERROR : (3084 | WRITER_1__1) : (IS | PC_INT_EE_QA) : node01_lxinfaeeqa1 : WRT_8081 : Writer run terminated. [Error in loading data to target table [Target_jms: Partition 1]]
2020-05-04 23:28:28 : INFO : (3084 | WRITER_1__1) : (IS | PC_INT_EE_QA) : node01_lxinfaeeqa1 : WRT_8168 : End loading table [Target_jms: Partition 1] at: Mon May 04 13:58:28 2020
2020-05-04 23:28:28 : INFO : (3084 | WRITER_1__1) : (IS | PC_INT_EE_QA) : node01_lxinfaeeqa1 : WRT_8035 : Load complete time: Mon May 04 13:58:28 2020
Appreciate the help.
The queue size for azure was 1GB but it seems that Azure service bus queue can only accept 100 messages in one transaction. I was able to solve the issue by changing the properties at informatica session level.
Commit type to "Target"
commit interval to "100"
And in target properties kept the JMS priority to 9.
Related
I am following this guide to run my C++ code in micropython environment, the normal/simple C++ code works on my ESP32 board but when i try running big loops it gives an error.
The error:
$ picocom -b 115200 /dev/ttyUSB0
picocom v3.1
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
hangup is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
logfile is : none
initstring : none
exit_after is : not set
exit is : no
Type [C-a] [C-h] to see available commands
Terminal ready
>>> import cppexample
>>> cppexample.cppfunc()
abort() was called at PC 0x402acc26 on core 0
Backtrace:0x400912c6:0x3ffce1c0 0x40091989:0x3ffce1e0 0x400956ae:0x3ffce200 0x402acc26:0x3ffce270 0x40396985:0x3ffce290 0x40396ac5:0x3ffce2b0 0x400d3d73:0x3ffce2d0 0x400d4f53:0x3ffce390 0x402a7d26:0x3ffce3d0 0x402af51d:0x3ffce680 0x402b55f9:0x3ffce6a0 0x402b5726:0x3ffce6c0 0x402b77e1:0x3ffce6e0 0x402af6f0:0x3ffce780 0x402b55f9:0x3ffce7d0 0x402b5622:0x3ffce7f0 0x402e1847:0x3ffce810 0x402e1b99:0x3ffce8a0 0x402c69b0:0x3ffce8e0
ELF file SHA256: fe8de9466e5c428e
Rebooting...
ets Jul 29 2019 12:21:46
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:4
load:0x3fff0034,len:5572
load:0x40078000,len:12696
load:0x40080400,len:4292
entry 0x40080414
MicroPython v1.16-243-g8c4ba575f-dirty on 2021-09-20; ESP32 module with ESP32
Type "help()" for more information.
>>>
I got no idea what's happening,any help is appreciated
Here is a sample remote session that I am automating
[sample-session]
$telnet 172.16.11.2
Trying 172.16.11.2...
Connected to 172.16.11.2.
Escape character is '^]'.
BCM96858 Broadband Router
Login: user
Password:
> voice show
Global Parameters:
------------------
BoundIfName : bronu8.2501
IP address family : IPv4
BoundIpAddr : 172.16.11.2
Voice Log Levels : general=3,cmgr=3,disp=3,sipcctk=3,bos=3,ept=3,cms=3,prov=3,lhapi=3,istw=3,dsphal=3,slicslac=3
Management Protocol : OMCI
Voice DNS Server Enable : Off
Voice DNS Server Primary : 0.0.0.0
Voice DNS Server Secondary : 0.0.0.0
Service Provider 0:
--------------------
Associated Voice Profile: 1
Locale : IND
DTMFMethod : InBand
HookFlashMethod : None
DigitMap : x+T
Log Server Addr : 0.0.0.0
Log Server Port : 0
T38 : on
V18 : on
RTPDSCPMark : 46
European flash : Off
SIP:
SIP mode : RFC3261
Domain :
Port : 5060
Transport : UDP
SIP URI for TLS calls: Off
RegExpires : 300
RegRetryInterval : 60
DSCPMark : 46
Registrar Addr : 172.16.11.201
Registrar Port : 5060
Proxy Addr : 172.16.11.201
Proxy Port : 5060
OutBoundProxy Addr : 172.16.11.201
OutBoundProxy Port : 5060
Music Server Addr : 0.0.0.0
Music Server Port : 0
Conferencing URI :
Conferencing Option : Local
Failover Enable : Off
Sip OPTIONS Enable : Off
Back-to-primary cfg : Disabled
Secondary Domain :
Secondary Registrar Addr : 0.0.0.0
Secondary Registrar Port : 5060
Secondary Proxy Addr : 0.0.0.0
Secondary Proxy Port : 5060
Secondary Outbound Proxy Addr : 0.0.0.0
Secondary Outbound Proxy Port : 5060
To Tag Matching : On
Timer B ( in ms ) : 32000
Timer F ( in ms ) : 32000
SRTP Usage Option : Disabled
Account 0:
-----------
ActivationStatus : Enabled
VoipServiceStatus : Up
CallStatus : Idle
Associated LineInst : 1
PhysEndpt : 0
Extension : 122
DisplayName :
AuthName : 122
AuthPwd : 0000
TxGain : 0 dB
RxGain : 0 dB
CALLFEATURES:
MWI : off
Caller ID number : on
Caller ID name : on
CallWaiting : on
CFWDNum :
CallFwdAll : off
CallFwdBusy : off
CallFwdNoans : off
AnonymousOutgoingCall: off
AnonymousCallRcvBlock: off
DoNotDisturb : off
CallCompOnBusy : off
SpeedDial : off
WarmLine : off
WarmLineNum :
CallBarring : off
CallBarringMode : None
CallBarringPin : 9999
CallBarringDigitMap :
NetPrivacy : on
CODECSETTINGS:
VAD : on
pTime : 20
CodecList : (0) G.711MuLaw
(1) G.711ALaw
(2) G.723.1
(3) G.726_16
(4) G.726_24
(5) G.726_32
Account 1:
-----------
ActivationStatus : Enabled
VoipServiceStatus : Up
CallStatus : Idle
Associated LineInst : 2
PhysEndpt : 1
Extension : 121
DisplayName :
AuthName : 121
AuthPwd : 0000
TxGain : 0 dB
RxGain : 0 dB
CALLFEATURES:
MWI : off
Caller ID number : on
Caller ID name : on
CallWaiting : on
CFWDNum :
CallFwdAll : off
CallFwdBusy : off
CallFwdNoans : off
AnonymousOutgoingCall: off
AnonymousCallRcvBlock: off
DoNotDisturb : off
CallCompOnBusy : off
SpeedDial : off
WarmLine : off
WarmLineNum :
CallBarring : off
CallBarringMode : None
CallBarringPin : 9999
CallBarringDigitMap :
NetPrivacy : on
CODECSETTINGS:
VAD : on
pTime : 20
CodecList : (0) G.711MuLaw
(1) G.711ALaw
(2) G.723.1
(3) G.726_16
(4) G.726_24
(5) G.726_32
> exit
Bye bye. Have a nice day!!!
Connection closed by foreign host.
[/sample-session]
My aim is to obtain lines containing ActivationStatus and VoipServiceStatus.
So I wrote this script
#!/usr/bin/expect -f
set timeout 2
set ip_addr [lindex $argv 0]
set OUTFILE "voip_status.log"
spawn telnet 172.16.11.$ip_addr
expect {
timeout { send_user "\nFailed to get login prompt for $ip_addr\n"; exit 1 }
eof { send_user "\ntelnet failure for server $ip_addr\n"; exit 2 }
"*Login:"
}
#expect "*Login:"
send -- "user\r"
expect "*Password:"
send -- "user\r"
expect ">"
send -- "voice show\r"
expect ">"
set voice_full_output $expect_out(buffer)
set voice_stat_lines [ split $voice_full_output "\n" ]
foreach line $voice_stat_lines {
if {[string match "*VoipServiceStatus*" $line]} {
set timestamp [timestamp -format %Y-%m-%d_%H:%M:%S]
set chan [open $OUTFILE a+]
#puts "ok - MATCH $line"
puts $chan "$line $timestamp"
close $chan
}
if {[string match "*ActivationStatus*" $line]} {
set chan [open $OUTFILE a+]
#puts "ok - MATCH $line"
puts $chan "$line"
close $chan
}
}
send -- "exit\r"
expect eof
Here is my output
$ cat voip_status.log
ActivationStatus : Enabled
2021-03-17_11:32:35tus : Up
ActivationStatus : Enabled
2021-03-17_11:32:35tus : Up
As you can see that time stamp has overwritten the line I had filtered out.
I wanted timestamp to appear at the end of line .
Why is this happening ?
Here I made an experimental setup which anybody can run to see this behaviour.
Contents of 'output-voice-log-for-experiment.sh' follow
[file to give input]
#!/usr/bin/perl
print "
Account 0:
-----------
ActivationStatus : Enabled
VoipServiceStatus : Up
CallStatus : Idle
Associated LineInst : 1
PhysEndpt : 0
Extension : 122
DisplayName :
AuthName : 122
AuthPwd : 0000
TxGain : 0 dB
RxGain : 0 dB
CALLFEATURES:
MWI : off
Caller ID number : on
Caller ID name : on
CallWaiting : on
CFWDNum :
CallFwdAll : off
CallFwdBusy : off
CallFwdNoans : off
AnonymousOutgoingCall: off
AnonymousCallRcvBlock: off
DoNotDisturb : off
CallCompOnBusy : off
SpeedDial : off
WarmLine : off
WarmLineNum :
CallBarring : off
CallBarringMode : None
CallBarringPin : 9999
CallBarringDigitMap :
NetPrivacy : on
CODECSETTINGS:
VAD : on
pTime : 20
CodecList : (0) G.711MuLaw
(1) G.711ALaw
(2) G.723.1
(3) G.726_16
(4) G.726_24
(5) G.726_32
Account 1:
-----------
ActivationStatus : Enabled
VoipServiceStatus : Up
CallStatus : Idle
Associated LineInst : 2
PhysEndpt : 1
Extension : 121
DisplayName :
AuthName : 121
AuthPwd : 0000
TxGain : 0 dB
RxGain : 0 dB
CALLFEATURES:
MWI : off
Caller ID number : on
Caller ID name : on
CallWaiting : on
CFWDNum :
CallFwdAll : off
CallFwdBusy : off
CallFwdNoans : off
AnonymousOutgoingCall: off
AnonymousCallRcvBlock: off
DoNotDisturb : off
CallCompOnBusy : off
SpeedDial : off
WarmLine : off
WarmLineNum :
CallBarring : off
CallBarringMode : None
CallBarringPin : 9999
CallBarringDigitMap :
NetPrivacy : on
CODECSETTINGS:
VAD : on
pTime : 20
CodecList : (0) G.711MuLaw
(1) G.711ALaw
(2) G.723.1
(3) G.726_16
(4) G.726_24
(5) G.726_32
> exit
"
[/file to give input]
Contents of 'process-experimental-echo.sh' follow
[file to process input]
#!/usr/bin/expect -f
spawn ./output-voice-log-for-experiment.sh
set timeout 20
set OUTFILE "experimental_voip_status.log"
expect ">"
set voice_full_output $expect_out(buffer)
set voice_stat_lines [ split $voice_full_output "\n" ]
foreach line $voice_stat_lines {
if {[string match "*VoipServiceStatus*" $line]} {
set timestamp [timestamp -format %Y-%m-%d_%H:%M:%S]
set chan [open $OUTFILE a+]
puts "ok - MATCH $line"
puts $chan "$line $timestamp"
close $chan
}
if {[string match "*ActivationStatus*" $line]} {
set chan [open $OUTFILE a+]
puts "ok - MATCH $line"
puts $chan "$line"
close $chan
}
}
[/file to process input]
Now simply run ./process-experimental-echo.sh and see this behaviour yourself.
Here is the output file you will get
$ cat experimental_voip_status.log
ActivationStatus : Enabled
2021-03-17_12:27:11tus : Up
ActivationStatus : Enabled
2021-03-17_12:27:11tus : Up
Thanks.
If you look at the output file using cat -vet it shows the non-printing control characters, tabs, and end-of-line, and you get:
ActivationStatus : Enabled^M$
VoipServiceStatus : Up^M 2021-03-17_09:02:53$
You can see ^M in the middle of a line, which is carriage-return. On a terminal this makes the cursor go back to the start of the line, and start overprinting.
This is the typical result of spawn, which runs a command through a pty, which alters each output newlines into carriage-return and newline. This is normal and desired for a pty. You can either turn it off (see stty -onlcr), or knowing that it is likely to be there, you can remove it in your script: after the foreach ... line, trim the variable $line to remove \r:
set line [string trimright $line "\r"]
I'm trying to use TeamCity command line tool but receiving an error? What is missing?
The command executed:
java -jar tcc.jar info --host http://tc
The output:
[Connecting to "http://tc" TeamCity Server] started
[Connecting to "http://tc" TeamCity Server] done
[Logging in] started
[Logging in] done
[ ] info: error
com.thoughtworks.xstream.converters.ConversionException: No enum constant jetbrains.buildServer.BuildTypeDescriptor.CheckoutType.AUTO : No enum constant jetbrains.buildServer.BuildTypeDescriptor.CheckoutType.AUTO
---- Debugging information ----
message : No enum constant jetbrains.buildServer.BuildTypeDescriptor.CheckoutType.AUTO
cause-exception : java.lang.IllegalArgumentException
cause-message : No enum constant jetbrains.buildServer.BuildTypeDescriptor.CheckoutType.AUTO
class : jetbrains.buildServer.BuildTypeDescriptor$CheckoutType
required-type : jetbrains.buildServer.BuildTypeDescriptor$CheckoutType
converter-type : com.thoughtworks.xstream.converters.enums.EnumConverter
path : /Project/configs/Configuration/checkoutType
line number : 1
class[1] : jetbrains.buildServer.BuildTypeData
converter-type[1] : com.thoughtworks.xstream.converters.reflection.ReflectionConverter
class[2] : java.util.ArrayList
converter-type[2] : com.thoughtworks.xstream.converters.collections.CollectionConverter
class[3] : jetbrains.buildServer.ProjectData
version : null
-------------------------------
System is a Linux-x86-64. We have SonarQube 4.0 running but can't run any version above that. We've been trying to get 5.0.1 up and running but it stops after about two seconds.
We see this error on the log but are not sure if it's normal:
Load native library. One or more attempts may fail if platform specific libraries do not exist.
Loading native library failed: libwrapper-linux-x86-64.so Cause: java.lang.UnsatisfiedLinkError: no wrapper-linux-x86-64 in java.library.path
Loaded native library: libwrapper.so
Here is the log:
-bash-4.1$ ./sonar.sh status
+ DEF_APP_NAME=SonarQube
+ DEF_APP_LONG_NAME=SonarQube
+ SONAR_HOME=/usr/local/sonarqube-5.0.1
+ PLATFORM=linux-x86-64
+ APP_NAME=SonarQube
+ APP_LONG_NAME=SonarQube
+ WRAPPER_CMD=/usr/local/sonarqube-5.0.1/bin/linux-x86-64/wrapper
+ WRAPPER_CONF=/usr/local/sonarqube-5.0.1/conf/wrapper.conf
+ PRIORITY=
+ PIDDIR=/var/run/sonar
+ case $0 in
++ pwd
+ PWD=/usr/local/sonarqube-5.0.1/bin/linux-x86-64
+ SCRIPT=/usr/local/sonarqube-5.0.1/bin/linux-x86-64/./sonar.sh
+ CHANGED=true
+ '[' Xtrue '!=' X ']'
++ echo /usr/local/sonarqube-5.0.1/bin/linux-x86-64/./sonar.sh
++ sed -e 's; ;:;g'
+ SAFESCRIPT=/usr/local/sonarqube-5.0.1/bin/linux-x86-64/./sonar.sh
++ echo /usr/local/sonarqube-5.0.1/bin/linux-x86-64/./sonar.sh
++ sed -e 's;/; ;g'
+ TOKENS=' usr local sonarqube-5.0.1 bin linux-x86-64 . sonar.sh'
+ REALPATH=
+ for C in '$TOKENS'
++ echo usr
++ sed -e 's;:; ;g'
+ C=usr
+ REALPATH=/usr
+ '[' -h /usr ']'
+ for C in '$TOKENS'
++ echo local
++ sed -e 's;:; ;g'
+ C=local
+ REALPATH=/usr/local
+ '[' -h /usr/local ']'
+ for C in '$TOKENS'
++ echo sonarqube-5.0.1
++ sed -e 's;:; ;g'
+ C=sonarqube-5.0.1
+ REALPATH=/usr/local/sonarqube-5.0.1
+ '[' -h /usr/local/sonarqube-5.0.1 ']'
+ for C in '$TOKENS'
++ echo bin
++ sed -e 's;:; ;g'
+ C=bin
+ REALPATH=/usr/local/sonarqube-5.0.1/bin
+ '[' -h /usr/local/sonarqube-5.0.1/bin ']'
+ for C in '$TOKENS'
++ echo linux-x86-64
++ sed -e 's;:; ;g'
+ C=linux-x86-64
+ REALPATH=/usr/local/sonarqube-5.0.1/bin/linux-x86-64
+ '[' -h /usr/local/sonarqube-5.0.1/bin/linux-x86-64 ']'
+ for C in '$TOKENS'
++ echo .
++ sed -e 's;:; ;g'
+ C=.
+ REALPATH=/usr/local/sonarqube-5.0.1/bin/linux-x86-64/.
+ '[' -h /usr/local/sonarqube-5.0.1/bin/linux-x86-64/. ']'
+ for C in '$TOKENS'
++ echo sonar.sh
send a packet START : start
Received a packet LOW_LOG_LEVEL : 1
Wrapper Manager: LowLogLevel from Wrapper is 1
calling WrapperListener.start()
Waiting for WrapperListener.start runner thread to complete.
WrapperListener.start runner thread started.
WrapperSimpleApp: invoking main method
Wrapper Manager: ShutdownHook started
WrapperManager.stop(0) called by thread: Wrapper-Shutdown-Hook
read a packet STOP : 0
JVM requested a shutdown. (0)
wrapperStopProcess(0) called.
Sending stop signal to JVM
send a packet STOP : NULL
Send a packet START_PENDING : 5000
read a packet START_PENDING : 5000
JVM signalled a start pending with waitHint of 5000 millis.
Thread, Wrapper-Shutdown-Hook, handling the shutdown process.
shutdownJVM(0) Thread:Wrapper-Shutdown-Hook
Send a packet STOPPED : 0
read a packet STOPPED : 0
JVM signalled that it was stopped.
Closing socket.
socket read no code (closed?).
server listening on port 32001.
JVM exited normally.
Signal trapped. Details:
signal number=17 (SIGCHLD), source="unknown"
Received SIGCHLD, checking JVM process status.
JVM process exited with a code of 0, leaving the wrapper exit code set to 0.
Wrapper Manager: ShutdownHook complete
Send a packet START_PENDING : 5000
Spawning intermediate process...
Spawning daemon process...
--> Wrapper Started as Daemon
Using tick timer.
server listening on port 32000.
Command[0] : /auto/uscmweb/java/jdk1.8.0_40/bin/java
Command[1] : -Djava.awt.headless=true
Command[2] : -Xms256m
Command[3] : -Xmx512m
Command[4] : -Djava.library.path=./lib
Command[5] : -classpath
Command[7] : -Dwrapper.key=0bS89TdW9DaXfF5z
Command[8] : -Dwrapper.port=32000
Command[9] : -Dwrapper.jvm.port.min=31000
Command[10] : -Dwrapper.jvm.port.max=31999
Command[11] : -Dwrapper.debug=TRUE
Command[12] : -Dwrapper.pid=9207
Command[13] : -Dwrapper.version=3.2.3
Command[14] : -Dwrapper.native_library=wrapper
Command[15] : -Dwrapper.service=TRUE
Command[16] : -Dwrapper.cpu.timeout=10
Command[17] : -Dwrapper.jvmid=1
Command[18] : org.tanukisoftware.wrapper.WrapperSimpleApp
Command[19] : org.sonar.application.App
Launching a JVM...
Wrapper (Version 3.2.3) http://wrapper.tanukisoftware.org
Copyright 1999-2006 Tanuki Software, Inc. All Rights Reserved.
send a packet START : start
Received a packet LOW_LOG_LEVEL : 1
Wrapper Manager: LowLogLevel from Wrapper is 1
calling WrapperListener.start()
Waiting for WrapperListener.start runner thread to complete.
WrapperListener.start runner thread started.
WrapperSimpleApp: invoking main method
Wrapper Manager: ShutdownHook started
WrapperManager.stop(0) called by thread: Wrapper-Shutdown-Hook
read a packet STOP : 0
JVM requested a shutdown. (0)
wrapperStopProcess(0) called.
Sending stop signal to JVM
send a packet STOP : NULL
Send a packet START_PENDING : 5000
read a packet START_PENDING : 5000
JVM signalled a start pending with waitHint of 5000 millis.
Thread, Wrapper-Shutdown-Hook, handling the shutdown process.
shutdownJVM(0) Thread:Wrapper-Shutdown-Hook
Send a packet STOPPED : 0
read a packet STOPPED : 0
JVM signalled that it was stopped.
Closing socket.
socket read no code (closed?).
server listening on port 32001.
JVM exited normally.
Signal trapped. Details:
signal number=17 (SIGCHLD), source="unknown"
Received SIGCHLD, checking JVM process status.
JVM process exited with a code of 0, leaving the wrapper exit code set to 0.
Wrapper Manager: ShutdownHook complete
Send a packet START_PENDING : 5000
Spawning intermediate process...
Spawning daemon process...
--> Wrapper Started as Daemon
Using tick timer.
server listening on port 32000.
Command[0] : /auto/uscmweb/java/jdk1.8.0_40/bin/java
Command[1] : -Djava.awt.headless=true
Command[2] : -Xms256m
Command[3] : -Xmx512m
Command[4] : -Djava.library.path=./lib
Command[5] : -classpath
Command[7] : -Dwrapper.key=0bS89TdW9DaXfF5z
Command[8] : -Dwrapper.port=32000
Command[9] : -Dwrapper.jvm.port.min=31000
Command[10] : -Dwrapper.jvm.port.max=31999
Command[11] : -Dwrapper.debug=TRUE
Command[12] : -Dwrapper.pid=9207
Command[13] : -Dwrapper.version=3.2.3
Command[14] : -Dwrapper.native_library=wrapper
Command[15] : -Dwrapper.service=TRUE
Command[16] : -Dwrapper.cpu.timeout=10
Command[17] : -Dwrapper.jvmid=1
Command[18] : org.tanukisoftware.wrapper.WrapperSimpleApp
Command[19] : org.sonar.application.App
Launching a JVM...
Wrapper (Version 3.2.3) http://wrapper.tanukisoftware.org
Copyright 1999-2006 Tanuki Software, Inc. All Rights Reserved.
Wrapper Manager: JVM #1
Running a 64-bit JVM.
Wrapper Manager: Registering shutdown hook
Wrapper Manager: Using wrapper
Load native library. One or more attempts may fail if platform specific librari
es do not exist.
Loading native library failed: libwrapper-linux-x86-64.so Cause: java.lang.Unsa
tisfiedLinkError: no wrapper-linux-x86-64 in java.library.path
Loaded native library: libwrapper.so
Calling native initialization method.
Inside native WrapperManager initialization method
Java Version : 1.8.0_40-b25 Java HotSpot(TM) 64-Bit Server VM
Java VM Vendor : Oracle Corporation
Control event monitor thread started.
Startup runner thread started.
WrapperManager.start(org.tanukisoftware.wrapper.WrapperSimpleApp#4a574795, args[
]) called by thread: main
Communications runner thread started.
Open socket to wrapper...Wrapper-Connection
Failed attempt to bind using local port 31000
Opened Socket from 31001 to 32000
Send a packet KEY : 0bS89TdW9DaXfF5z
handleSocket(Socket[addr=/127.0.0.1,port=32000,localport=31001])
accepted a socket from 127.0.0.1 on port 31001
read a packet KEY : 0bS89TdW9DaXfF5z
Got key from JVM: 0bS89TdW9DaXfF5z
send a packet LOW_LOG_LEVEL : 1
send a packet PING_TIMEOUT : 0
send a packet PROPERTIES : (Property Values)
Start Application.
send a packet START : start
Received a packet LOW_LOG_LEVEL : 1
Wrapper Manager: LowLogLevel from Wrapper is 1
Received a packet PING_TIMEOUT : 0
PingTimeout from Wrapper is 0
Received a packet PROPERTIES : (Property Values)
Received a packet START : start
calling WrapperListener.start()
Waiting for WrapperListener.start runner thread to complete.
WrapperListener.start runner thread started.
WrapperSimpleApp: start(args) Will wait up to 2 seconds for the main method to c
omplete.
WrapperSimpleApp: invoking main method
Wrapper Manager: ShutdownHook started
WrapperManager.stop(0) called by thread: Wrapper-Shutdown-Hook
Send a packet STOP : 0
read a packet STOP : 0
JVM requested a shutdown. (0)
wrapperStopProcess(0) called.
Sending stop signal to JVM
send a packet STOP : NULL
Startup runner thread stopped.
Send a packet START_PENDING : 5000
read a packet START_PENDING : 5000
JVM signalled a start pending with waitHint of 5000 millis.
Thread, Wrapper-Shutdown-Hook, handling the shutdown process.
shutdownJVM(0) Thread:Wrapper-Shutdown-Hook
Send a packet STOPPED : 0
read a packet STOPPED : 0
JVM signalled that it was stopped.
Closing socket.
socket read no code (closed?).
server listening on port 32001.
JVM exited normally.
Signal trapped. Details:
signal number=17 (SIGCHLD), source="unknown"
Received SIGCHLD, checking JVM process status.
JVM process exited with a code of 0, leaving the wrapper exit code set to 0.
Wrapper Manager: ShutdownHook complete
Send a packet START_PENDING : 5000
WrapperSimpleApp: start(args) end. Main Completed=false, exitCode=null
WrapperListener.start runner thread stopped.
<-- Wrapper Stopped
I was able to fix this. The fix was to make sure that all of the files in the directory are owned by the user you are logged in as.
chown -R sonaruser /usr/local/sonarqube-5.0.1
chown sonaruser /etc/init.d/sonar
I am having issue with Opening JMeter Test Plan, below is the exception i am getting. This started happening suddenly after system restart.
Error -
015/03/25 13:08:17 ERROR - jmeter.save.SaveService: Conversion error com.thoughtworks.xstream.converters.ConversionException: -1 : -1
---- Debugging information ----
message : -1
cause-exception : java.lang.ArrayIndexOutOfBoundsException
cause-message : -1
class : org.apache.jmeter.testelement.property.DoubleProperty
required-type : org.apache.jmeter.testelement.property.DoubleProperty
converter-type : com.thoughtworks.xstream.converters.reflection.ReflectionConverter
path : /jmeterTestPlan/hashTree/hashTree/hashTree[6]/hashTree[10]/hashTree/ConstantThroughputTimer/doubleProp/name
line number : 1007
class[1] : org.apache.jmeter.timers.ConstantThroughputTimer
converter-type[1] : org.apache.jmeter.save.converters.TestElementConverter
class[2] : org.apache.jorphan.collections.ListedHashTree
converter-type[2] : org.apache.jmeter.save.converters.HashTreeConverter
After spending hours i found workaround. Just simply run Jmeter as Administrator and it will work.