Can someone help me with these log file? When i started up spring tool suite, it says "an error has occurred. See the log file." How do i fix these issues?
Log file part 1
Log file part 2
OK. Somehow, i managed to fix it. I've followed the stuff on this forum page(Link Here).
What I've done was deleting all of the (lock) files under under "configuration/org.eclipse.osgi/.manager". these files had names starting with .fileTable
After that i managed to start up spring tool suite again. So far nothing seems to be breaking.
Related
I'm on Talend ESB Runtime.
I encountered problems while starting ./trun. Nothing on the screen appeared after start. The process is launched but I can't get anything else...
Anyway I tryed to deployed a job, and there is something weird in the log about org.osgi.framework.bundleException in tesb.log.
And Karaf.log is OK
Here tesb.log :
tesb.log
karaf.log :
karaf.log
log in repository data :
timestamplog
I don't know how to investigate, because logs are poor and JVM is equal between Talend ESB and the runtime...
Can you help me please?
You only showed a small snippet of the log. From this I can already see that at least one bundle can not be resolved. This means that this bundle can not be used. In the snippet the bundle seems to be a user bundle but I am pretty sure you have other such log messages that show that one of the main bundles of karaf can not be loaded.
If you want to check for the cause of the problem look into these messages and search for non optional package that are not resolved. Usually this leads to a missing bundle.
If you simply want to get your system running again you can simply reset karaf by using
./trun clean
Remember though that you then have to reinstall all features again.
My goal is to run a load test using 4 Azure servers as load generators and 1 Azure server to initiate the test and gather results. I had the distributed test running and I was getting good data. But today when I remote start the test 3 of the 4 load generators fail with all the http transactions erroring. The failed transactions log the following error:
Non HTTP response message: java.lang.ClassNotFoundException: org.apache.commons.logging.impl.Log4jFactory (Caused by java.lang.ClassNotFoundException: org.apache.commons.logging.impl.Log4jFactory)
I confirmed the presence of commons-logging-1.2.jar in the jmeter\lib folder on each machine.
To try to narrow down the issue I set up one Azure server to both initiate the load and run JMeter-server but this fails too. However, if I start the test from the JMeter UI on that same server the test runs OK. I think this rules out a problem in the script or a problem with the Azure machines talking to each other.
I also simplified my test plan down to where it only runs one simple http transaction and this still fails.
I've gone through all the basics: reinstalled jmeter, updated java to the latest version (1.8.0_111), updated the JAVA_HOME environment variable and backed out the most recent Microsoft Security update on the server. Any advice on how to pick this problem apart would be greatly appreciated.
I'm using JMeter 3.0r1743807 and Java 1.8
The Azure servers are running Windows Server 2008 R2
I did get a resolution to this problem. It turned out to be a conflict between some extraneous code in a jar file and a component of JMeter. It was “spooky” because something influenced the load order of referenced jar files and JMeter components.
I had included a jar file in my JMeter script using the “Add directory or jar to classpath” function in the Test Plan. This jar file has a piece of code I needed for my test along with many other components and one of those components, probably a similar logging function, conflicted with a logging function in JMeter. The problem was spooky; the test ran fine for months but started failing at the maximally inconvenient time. The problem was revealed by creating a very simple JMeter test that would load and run just fine. If I opened the simple test in JMeter then, without closing JMeter, opened my problem test, my problem test would not fail. If I reversed the order, opening the problem test followed by the simple test then the simple test would fail too. Given that the problem followed the order in which things loaded I started looking at the jar files and found my suspect.
When I built the script I left the jar file alone thinking that the functions I need might have dependencies to other pieces within the jar. Now that things are broken I need to find out if that is true and happily it is not. So, to fix the problem I changed the extension on my jar file to zip then edited it in 7-zip. I removed all the code except what I needed. I kept all the folders in the path to my needed code, I did this for two reasons; I did not have to update my code that called the functions and when I tried changing the path the functions did not work.
Next I changed the extension on the file back to jar and changed the reference in JMeter’s “Add directory or jar to classpath” function to point to the revised jar. I haven’t seen the failure since.
Many thanks to the folks who looked at this. I hope the resolution will help someone out.
Here is my scenario:
I have a suite of WATIN GUI tests that run against a ASP.net MVC3 web app per build in CI. The tests verify that the GUI behaves as expected when given certain inputs.
The web app uses ELMAH xml files for logging exceptions.
Question: How can I verify that no unexpected exceptions occurred during each test run. It would also be nice to provide a link to the ELMAH detail of the exception in the NUNIT output if an exception did occur.
Elmah runs in the web application which is a separate process from the test runner. There is no easy way to directly intercept unhandled errors.
The first thing that comes to mind is to watch the folder (App_Data?) that holds the Elmah XML error reports.
You could clear error reports from the folder when each test starts and check whether it is still empty at the end of the test. If the folder is not empty you can copy the error report(s) into the test output.
This approach is not bullet proof. It could happen that an error has occurred but the XML file was not yet (completely) written when you check the folder. For example when your web application is timing out. You could potentially also run into file locking issues if you try to read an XML file that is still being written.
Instead of reading XML files from disk you could configure Elmah to log to a database and read the error reports from there. That would help you get around file locking issues if they occur.
Why not go to the Elmah reporting view (probably elmah.axd) in the setup of your WatiN test and read the timestamp of the most recent error logged there. Then do the same after your test and assert that the timestamps are the same.
It would be easy to read the url of this most recent error from the same row and record that in the message of your failing assert which would then be in your nunit output.
This is what my tests do:
During test setup record the time
Run test
During test teardown browse to (elmah.axd/download) and parse the ELMAH CSV
Filter out rows that don't match the user that is running the WATIN tests and rows where the UNIX time was before the recorded time in (1)
If there are rows report the exception message and the error URL to NUNIT.
Seems to work well, we have already caught a couple of bugs that wouldn't have surfaced until a human tested the app.
I am using windows 7 and I tried to restore JPA file using kickstart.php and got the following error:
Could not open plugins/system/blueflame/cache/bfCache-1301935712com_form.mootools.x\' wAiTfOr dELay \'0:0:20\'--.gzip for writing.
I am unable to understand what it means ?? Is this problem in jpa file or some sort of permissions? my client me that jpa file and seems file but not sure about that. Please tell whatever you know about it.
thanks
I use godaddy hosting with IIS7, there is a blogengine in the root, I create a new subdomain named: http://leech.code2code.info (PHP code).
I din't work. I did the same like instruction http://blogengine.codeplex.com/discussions/32808
But the problem still occur.
Please advice me,
Thanks
Reread the error message. This doesn't seem like you're having some config error in your code. Your webserver is missing an assembly it needs to execute the code. The server is missing the component "Microsoft.Web.Infrastructure" or it couldn't load the correct version.
Check the file D:\hosting\6918570\html\web.config on line 74 for this reference. It might work removing the dependency (backup the file first), but that really depends on the code used.
The linked thread is talking about a different issue, just resulting in a similar error message.
These instructions on BIN deploying by Scott Hanselman helped me.
http://www.hanselman.com/blog/BINDeployingASPNETMVC3WithRazorToAWindowsServerWithoutMVCInstalled.aspx