I'm developing with Qt. Following a tiny change my program now will not start up and if I run the debugger, this dialog box is displayed:
I have looked at several other answers to questions about this error and Qt, and they all propose using a different compiler or a different version. I don't believe this will solve my problem.
Searching a little more diligently on Google, I came upon this article, about Visual C++ which suggests, very plausibly, that additional information is available but has been swallowed by one of the tools somewhere. The article goes on to suggest that by changing something in the registry, you can get additional information output when the error occurs. Now, I can run my program from the command line, with minimal intervening tools, so this looked like a really useful idea. Sadly, the link in the article that I believe will tell me more about the required registry change is dead.
Does this ring any bells with anyone? How can I found out the dll and entry point that isn't being found?
Thanks to helpful comments, I managed to get the additional trace enabled using the "image files" tab of gflags.exe. I then found an enormous quantity of trace information on the "Debugger Log" tab of the QCreator debugger.
Close examination showed that the function containing the tiny chnge which kicked off this problem was failing to load.
I have no idea what caused this, but a clean rebuild of the program in question now allows it to run to the point of the original failure that made me want to make a tiny change in the first place.
I guess the moral of the story is to do a clean build immediately when things start getting weird - before trying to pin down the weirdness!
Related
I have an issue I don't seem to find a solution for.
One of the transactions gives ABEND ASRA when used in debug mode.
When I compile the Cobol program without debug option and run the program, it works fine.
The error looks like this one (quite exactly like this), only I am using Cobol V4:
http://www-01.ibm.com/support/docview.wss?uid=swg1PM96501
Now the question would be: why is it abending in debugger and not without debugger?
I am using the CICS debugger (DTCN transaction), the program starts normally, I can do steps with F2 and all this, then at some location is abends.
Please note that it is extremely difficult to say where it abends as the program is really big.
This happens only to this program at the moment, others are running fine with debugger. I placed a breakpoint before my modifications, the abend occurs in some other area.
Another weird thing is that this Abend is not consistent, If I do a big portion of the code with small steps (F2 and small breakpoints), sometimes it executes without abend until the end.
Due to the nature of the issue, I can not post much information.
I was hoping you encountered similar issues and you can tell me where to look for.
Thank you!
The issue was solved by deleting my debug tool profile form the system and then login to the debugger (DTCN) again so it creates a new profile (the profile was 3 files: TOOLTEMP.PDTOOLS.{userid}.DBGTOOL.* ). After this the issue was gone. I asked the guys how this happened, they told me this was because I had modified the program between 2 debugging sessions without closing CICS. This was a disfunction that can be avoided by closing CICS while we compile programs used in it (not sure about why exactly.... neither are they).
Hope this helps if you face a similar issue with DTCN debugging.
So when a program dies rather ungracefully, modern versions of Windows put up a dialog that reads:
Windows is searching for a solution to the problem
It clocks for a little while, then doesn't find anything. Well, I've never had it tell me it's found a solution.
The question is, what exactly is going on when this dialog is being shown? What are possible things it can show as "solutions"? Is there a way my application can tap into it?
Obviously, if I know enough about what could go wrong, I should handle it in the app, so I'm left wondering what this actually does.
Anyone know?
Windows Error Reporting is capturing a stack trace of the failed program and sending it off to Microsoft. The data it collects is stuffed into an enormous database for vendors to research; if this is your program, you can sign up here. If the vendor submits a patch, Windows will notify you.
You can tap into it, either by customizing the info, triggering reports for (soon to be) fatal errors, and much more.
I am looking for code or options to disable a run time error. Instead showing that stupid message I just want a crash or to just continue. So in conclusion to do no show that message.
This question (or at least a very similar one) has been answered in Disable Microsoft Visual C Runtime Error
The errors need to be handled within your program to stop things going out of your control and the Microsoft dialog being displayed. The answer referred to explains how to capture these errors yourself. One way of implementing crash handling is to capture the minidumps for yourself, using something like CrashRpt into your software.
As part of the work I've been doing to answer this question about the technical workings of a glitch in Pokémon Red, I've been looking for a way to use a standard debugger to debug a Game Boy ROM. Although many of the emulators I've found have some support for debugging, nothing I've found so far has been helpful.
As a background, as of now I have tried to use the Visual Boy Advance built-in features to do debugging, but they aren't particularly useful for what I'm trying to do. VBA lacks the ability to set breakpoints, and since it steps forward at the level of frames rather than instructions I'm unable to see how the code is executing when I actually need it to. Although VBA says that it supports GDB debugging, I have been completely unable to get it working. I tried cross-compiling GDB for ARM as per the instructions, but could not get GDB to connect to the emulator (it would recognize that there was a program to connect to, but reported that the protocol had been violated). I repeated this with similar success in both Windows with Cygwin and on Ubuntu Linux. A friend and I tried to use Insight/GDB, but ran into exactly the same problems.
I also tried to use the NO$GBA debugger, but it refused to load my ROM for Pokémon Red (and then insulted me by saying that nothing I could try to do would fix it, as the file was just flat-out wrong).
Additionally, I tried downloading this version of Visual Boy Advance that claims to have a debugger in it, but for some reason I can't get it to enable the debugger. Pressing F11 as per its instructions has no effect whatsoever.
I believe that I've done my due diligence trying to get a debugger working, and I'm surprised that not a single one of them has worked. Does anyone know of a simple, straightforward way to debug Game Boy games using standard debugging techniques? I'm interested mostly in being able to put in memory write breakpoints (to see what routine is clobbering certain parts of memory). I would really appreciate it if someone with first-hand experience doing this could provide details on how to do this, as online resources on the subject seem pretty limited.
If you just want to debug your old gameboy games you can also use bgb which has several debugging options such as tracing, breakpoints, profiler and a lot more.
No$GBA is for GBA games; you want NO$GMB. Note that it's very buggy, and without a registered version (which may be impossible to get legitimately) rather crippled.
bgb is free and is very similar to No$GMB, but even buggier.
VBA is supposed to have a debugger, but there are a million different versions out there, so good luck finding the right one.
Check out the site GbaDev.org and look on the forums. This is the best spot on the web for GBA or even GBC questions. I can tell you that there are many versions of VBA and no$ out and about. The No$ you want was technically a pay for version, but Martin Korth hasn't been answering emails or anything for years now and I'm not sure of its status anymore. I can also answer some questions for you personally if you'd like or help you with the debugger.
I was able to go to the no$ main website, download the windows version of no$gmb, and use it to debug when run in B/W mode - should be sufficient for you needs. F12 opens roms, F2 toggles break points, space traces, F3 steps over, Ctrl-G takes you to an address (or symbol), and Ctrl_B allows conditional break points (by far the most powerful feature for you to use.) For instance, (3000)! would set a read/write breakpoint on address 0x3000. (0300..03003)! sets on a range. As you are looking for specific address changes, this is what you want.
VBA-M has a bunch of debugging tools under "Tools" menu, including memory & tile inspectors and a disassembler. It even has support for GDB. I didn't test with any frontends like gdbgui, or VSCode's GDB support, so YMMV, but the other built-in tools look pretty decent.
Go to the releases section for a build for your platform (arch linux also has it in AUR, for easy install in package manager.)
Here it is running some of the tools on a Mac:
I am trying to help a client with a problem, but I am running out of ideas. They have a custom, written in house application that runs on a schedule, but it crashes. I don't know how long it has been like this, so I don't think I can trace the crashes back to any particular software updates. The most unfortunate part is there is no longer any source code for the VB6 DLL which contains the meat of the logic.
This VB6 DLL is kicked off by 2-3 function calls from a VB Script. Obviously, I can modify the VB Script to add error logging, but I'm not having much luck getting quality information to pinpoint the source of the crash. I have put logging messages on either side of all of the function calls and determined which of the calls is causing the crash. However, nothing is ever returned in the err object because the call is crashing wscript.exe.
I'm not sure if there is anything else I can do. Any ideas?
Edit: The main reason I care, even though I don't have the source code is that there may be some external factor causing the crash (insufficient credentials, locked file, etc). I have checked the log file that is created in drwtsn32.log as a result of wscript.exe crashing, and the only information I get is an "Access Violation".
I first tend to think this is something to do with security permissions, but couldn't this also be a memory access violation?
You may consider using one of the Sysinternals tools if you truly think this is a problem with the environment such as file permissions. I once used Filemon to figure out all the files my application was touching and discovered a problem that way.
You may also want to do a quick sanity check with Dependency Walker to make sure you are actually loading the DLL files you think you are. I have seen the wrong version of the C runtime being loaded and causing a mysterious crash.
Depending on the scope of the application, your client might want to consider a rewrite. Without source code, they will eventually be forced to do so anyway when something else changes.
It's always possible to use a debugger - either directly on the PC that's running the crashing app or on a memory dump - to determine what's happening to a greater or lesser extent. In this case, where the code is VB6, that may not be very helpful because you'll only get useful information at the Win32 level.
Ultimately, if you don't have the source code then will finding out where the bug is really help? You won't be able to fix it anyway unless you can avoid that code path for ever in the calling script.
You could use the debugging tools for windows. Which might help you pinpoint the error, but without the source to fix it, won't do you much good.
A lazier way would be to call the dll from code (not a script) so you can at least see what is causing the issue and inspect the err object. You still won't be able to fix it, unless the problem is that it is being called incorrectly.
The guy of Coding The Wheel has a pretty interesting series about building an online poker bot which is full of serious technical info, a lot of which is concerned with how to get into existing applications and mess with them, which is, in some way, what you want to do.
Specifically, he has an article on using WinDbg to get at important info, one on how to bend function calls to your own code and one on injecting DLLs in other processes. These techniques might help to find and maybe work around or fix the crash, although I guess it's still a tough call.
There are a couple of tools that may be helpful. First, you can use dependency walker to do a runtime profile of your app:
http://www.dependencywalker.com/
There is a profile menu and you probably want to make sure that the follow child processes option is checked. This will do two things. First, it will allow you to see all of the lib versions that get pulled in. This can be helpful for some problems. Second, the runtime profile uses the debug memory manager when it runs the child processes. So, you will be able to see if buffers are getting overrun and a little bit of information about that.
Another useful tool is process monitor from Mark Russinovich:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
This tool will report all file, registry and thread operations. This will help you determine if any you are bumping into file or registry credential issues.
Process explorer gives you a lot of the same information:
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
This is also a Russinovich tool. I find that it is a bit easier to look at some data through this tool.
Finally, using debugging tools for windows or dev studio can give you some insight into where the errors are occurring.
Access violation is almost always a memory error - all the more likely in this case because its random crashing (permissions would likely be more obviously reproducible). In the case of a dll it could be either
There's an error in the code in the dll itself - this could be something like a memory allocation error or even a simple loop boundary condition error.
There's an error when the dll tries to link out to another dll on the system. This will generally be caused by a mismatch between dll versions on the machine.
Your first step should be to try and get a reproducible crash condition. If you don't have a set of circumstances that will crash the system then you cannot know when you have fixed it.
I would then install the system on a clean machine and attempt to reproduce the error on that. Run a monitor and check precisely what other files (dlls etc) are open when the program crashes. I have seen code that crashes on a hyperthreaded Pentium but not on an earlier one - so restoring an old machine as a testbed may be a good option to cover that one. Varying the amount of ram in the machine is also worthwhile.
Hopefully these steps might give you a clue. Hopefully it will be an environment problem and so can be avoided by using the right version of windows, dlls etc. However if you're still stuck with the crash at this point with no good clues then your options are either to rewrite or attempt to hunt down the problem further by debugging the dll at assembler lever or dissassembling it. If you are not familiar with assembly code then both of these are long-shots and it's difficult to see what you will gain - and either option is likely to be a massive time-sink. Myself I have in the past, when faced with a particularly low-level high intensity problem like this advertised on one of the 'coder for hire' websites and looked for someone with specialist knowledge. Again you will need a reproducible error to be able to do this.
In the long run a dll without source code will have to be replaced. Paying a specialist with assembly skills to analyse the functions and provide you with flowcharts may well be worthwhile considering. It is good business practice to do this sooner in a controlled manner than later - like after the machine it is running on has crashed and that version of windows is no longer easily available.
You may want to try using Resource Hacker you may have luck de-compiling the in house application. it may not give you the full source code but at least maybe some more info about what the app is doing, which also may help you determine your culrpit.
Add the maximum possible RAM to the machine
This simple and cheap hack has work for me in the past. Of course YMMV.
Reverse engineering is one possibility, although a tough one.
In theory you can decompile and even debug/trace a compiled VB6 application - this is the easy part, modifying it without source, in all but the most simple cases, is the hard part.
Free compilers/decompilers:
VB decompilers
VB debuggers
Rewrite would be, in most cases, a more successful and faster way to solve the problem.