Related
Say in the working directory, I have:
$ find . | grep testfile
./testfile1
This is my Makefile:
list_files:
#echo "Show Files..."
#echo $(shell find . | grep testfile)
#touch testfile2
#echo $(shell find . | grep testfile)
#rm testfile2
With make, I got this:
$ make list_files
Show Files...
./testfile1
./testfile1
Why this happened? I expected it to be something like this:
Show Files...
./testfile1
./testfile1 ./testfile2
Then my question is:
Why all the variables/function in recipes inside a rule, are expanded likely simultaneously after target is invoked?
I have found an explanation from this answer that is pretty close to the truth:
The reason your attempt doesn't work is that make will evaluate all lines of the recipe before it starts the first line.
But there is no references provided there, I just cannot convinced myself of this working mechanism of GNU Make.
Could anyone give some clues? Thanks!
Why this happened?
Because, with one caveat that does not apply to your case, make functions such as $(shell ...) are evaluated when the makefile is parsed, not during the execution of recipes.
Why all the variables/function in recipes inside a rule, are expanded likely simultaneously after target is invoked?
They're not. They are expanded before the target's recipe runs. In fact, before make even determines whether the recipe should be run.
But there is no references provided
This is covered in the manual. See in particular section 8.14, The shell function:
The commands run by calls to the shell function are run when the function calls are expanded (see How make Reads a Makefile).
... which refers to section 3.7, How make Reads a Makefile, in particular:
GNU make does its work in two distinct phases. During the first phase it reads all the makefiles, included makefiles, etc. and internalizes all the variables and their values and implicit and explicit rules, and builds a dependency graph of all the targets and their prerequisites. During the second phase, make uses this internalized data to determine which targets need to be updated and run the recipes necessary to update them.
It also relies on section 8.1, Function Call Syntax:
A function call resembles a variable reference. It can appear anywhere a variable reference can appear, and it is expanded using the same rules as variable references.
"The same rules" of course includes the rules for when expansions are performed.
Your recipes should be written in the language of the target shell, usually /bin/sh. All make functions and variable references in each recipe will be expanded before any recipe runs, so their expansions cannot reflect the results of running any recipe during the current make run. It's particularly peculiar to try to use the $(shell ...) function to do that, because you can just use shell code directly in a recipe.
As explained in the comments, all $(shell ...) and other functions are executed (expanded) before executing any lines from the recipe. But you can delay the expansion:
list_files:
#echo "Show Files..."
#echo $$(shell find . | grep testfile)
#touch testfile2
#echo $$(shell find . | grep testfile)
#rm testfile2
This yields the expected output. Note the double $$. Make will still expand all variables/functions first before executing the recipe, and remove one of the dollar signs. The expressions will be expanded again, when executing the recipe lines.
Of course, you're better off without the $(shell) in this example. However, it's not inherently a bad idea. Sometimes you need to execute shell commands before expanding other variables, and then $(shell) is the trivial solution.
Note: This question was originally posted as a rant by a now-deleted user, but there was a valid question behind the rant; this is my attempt to provide an answer.
Given the Makefile:
ifeq "$(MAKELEVEL)" "0"
# Override the command-line specification of "foo".
override foo=replaced
export foo
all::
#echo outer: foo is "$(foo)"
#$(MAKE)
else
# Variable 'foo' was "exported" from the top-level Makefile.
all::
#echo inner: foo is "$(foo)"
endif
The expectation is that export foo will cause make to export the value defined in the override declaration. But it doesn't:
$ make -s foo=original
outer: foo is replaced
inner: foo is original
The expectation is probably reasonable, but it turns out that this is not the way Gnu make works. It could well be that the make documentation could be improved to clarify the process, but the hints all seem to be there.
How variables get their values
A variable can be set by the programmer in three ways:
On the command line with a var=value command-line argument
Explicitly in the make file
From the environment
The above list is the normal priority order; the first definition found in the list "wins". However, you can use the override directive to swap the priorities of the first two methods. (You can also use the -e flag to make to swap the priorities of the last two methods. The -e flag is required by Posix, but its use is discouraged and it does not interact will with override.)
How variables are passed to sub-makes
make is very similar to a shell in that the environment is used to pass variable values. If a variable is marked as exported, then its value is placed into the environment for any processes initiated by make, including sub-makes. As with the shell, a variable is marked as exported if its definition came from the environment or if it is explicitly marked as exported with the export directive. Variables are also exported if they were set on the command line.
However, there is another mechanism by which variables on the command-line are passed to subprocesses: the MAKEFLAGS exported variable.. MAKEFLAGS contains (most) command-line options as well as all of the command-line variable overrides. If make finds MAKEFLAGS in the environment, it merges the settings in that variable with the ones actually specified on its command line. That means that command-line variable settings in a make will also take priority in a sub-make.
Since command-line variable settings are passed through the MAKEFLAGS variable, they are not subject to any changes in the makefile. A makefile can unexport or override a variable set on the command-line, but that will only affect the value (or presence) of the variable in the environment; it does not remove or change the value from MAKEFLAGS.
Resolution
So if the intent is to override (or modify) a command-line variable both in the make itself and in the environment of sub-makes, it is necessary to use both an override and an explicit modification of MAKEFLAGS. (As explained in the make manual, MAKEFLAGS is actually recursively composed using the MAKEOVERRIDES variable, so we actually modify that variable.)
ifeq "$(MAKELEVEL)" "0"
# Override the command-line specification of "foo".
override foo=replaced
MAKEOVERRIDES += foo=replaced
all::
#echo outer: foo is "$(foo)"
#$(MAKE) -s
else
# Variable 'foo' was "exported" from the top-level Makefile.
all::
#echo inner: foo is "$(foo)"
endif
And now we get the expected result:
$ make -s foo=original
outer: foo is replaced
inner: foo is replaced
Real-life application: dealing with whitespace
The primary intention of overrides is to allow the makefile to append words to a variable possibly provided on the command line. The example provided in the gnu make manual is insisting that CFLAGS always includes the -g flag, even if it were specified on the make command line:
override CFLAGS += -g
Passing the append through to a sub-make needs a little caution; in particular, the obvious:
MAKEOVERRIDES += CFLAGS=$(CFLAGS) # Don't do this
won't work because the whitespace inside the CFLAGS variable will not be escaped when it is added to MAKEFLAGS; the result will be that MAKEFLAGS will look something like this:
-- CFLAGS=-O3 CFLAGS=-O3 -g
instead of the desired
-- CFLAGS=-O3 CFLAGS=-O3\ -g
If the value assigned to CFLAGS on the command line included whitespace, the whitespace is escaped in MAKEFLAGS. The particular escaping mechanism used is not documented, and Posix only requires that there be some mechanism; apparently, Gnu make uses backslash. It would be possible to manually backslash escape the whitespace, resulting in something like this:
# Don't do this either
MAKEOVERRIDES += CFLAGS=$(subst $(space),\ ,$(CFLAGS))
(The definition and use of space is based on an example in the gnu make manual.)
But it is actually easier to just use an append assignment in MAKEOVERRIDES, which is undocumented but appears to work. It works on the command line, too.
override CFLAGS+=-g
MAKEOVERRIDES += CFLAGS+=-g
Important Note as of make v4.1: A bit of testing revealed that the above stanza will only work if CFLAGS (or some other variable) is actually set on the command-line. I reported this bug as Savannah issue 46013, with a very simple fix in the bug report. In the meantime, if you really want to do this, use the following workaround:
override CFLAGS+=-g
MAKEOVERRIDES += CFLAGS+=-g
# This line is necessary in case there were no command-line overrides.
# In effect, it produces a command-line override, although that value
# will not be passed on to sub-makes.
MAKEFLAGS += dummy=dummy
Update May 19, 2019: Today I was informed that a fix for the bug referenced above has been committed, so it should be fixed in the next gmake release.
First of all, I want to point out that your suggestion to add to MAKEOVERRIDES, is dangerous!
And SHOULD NEVER BE DONE!!
You simply turn a recursive variable into a simple one, you will always get false results, if recursive expansion is done.
I can not believe that you got up-voted for this clearly wrong "suggestion".
And note this:
You can not even fix it with a quoted assignment, like MAKEOVERRIDES += foo=$$(bar)!!!
But, let me return to the main point of your post.
And, with which, I couldn't disagree more.
One simple example would be, if you run the very same makefile, that you have:
This one is copied verbatim, from your post:
ifeq "$(MAKELEVEL)" "0"
# Override the command-line specification of "foo".
override foo=replaced
export foo
all::
#echo outer: foo is "$(foo)"
#$(MAKE) -s
else
# Variable 'foo' was "exported" from the top-level Makefile.
all::
#echo inner: foo is "$(foo)"
endif
And running in any modern version, 4.0 and up:
# Sub-make does NOT get the value from the root-Make's command-line.
# Instead, it "inherits" the value from the root-Make's definition in the Makefile.
$ make -s foo=original -e
outer: foo is replaced
inner: foo is replaced
Now, given your assertion above:
However, there is another mechanism by which variables on the command-line are passed to subprocesses: the [MAKEFLAGS exported variable.][3]. MAKEFLAGS contains (most) command-line options as well as all of the command-line variable overrides. If make finds MAKEFLAGS in the environment, it merges the settings in that variable with the ones actually specified on its command line. That means that command-line variable settings in a make will also take priority in a sub-make.
Since command-line variable settings are passed through the MAKEFLAGS variable, they are not subject to any changes in the makefile. A makefile can unexport or override a variable set on the command-line, but that will only affect the value (or presence) of the variable in the environment; it does not remove or change the value from MAKEFLAGS.
You should get:
outer: foo is replaced
inner: foo is original
In other words, we should get for the sub-make, the value defined on the command-line (original)!
Because, you said yourself:
A makefile can't unexport or override a variable set on the command-line.
So, here, when we empower the environment over the makefile, which means that the makefile has less "power" in the total scheme of things. Right?
Sure, for such a case, you assertion will hold even stronger.
I am unable to prevent make from communicating any variables to a submake. I've read the manual and I've followed their advice (resetting MAKEOVERRIDES and MAKEFLAGS) but it's still not working has I think it should.
Consider the following prototype Makefile:
${warning $(MAKEOVERRIDES)}
${warning $(MAKEFLAGS)}
${warning $(VAR)}
none:
$(MAKE) -f Makefile MAKEOVERRIDES= MAKEFLAGS= all
all:
echo done!
If I make VAR=10 none, I get the following:
Makefile:2: VAR=10
Makefile:3:
Makefile:4: 10
make -f Makefile MAKEOVERRIDES= MAKEFLAGS= all
make[1]: Entering directory `/home/adriano/sandbox/makes'
Makefile:2:
Makefile:3:
Makefile:4: 10
echo done!
done!
make[1]: Leaving directory `/home/adriano/sandbox/makes'
Meaning that make is communication VAR to the submake. Is this the correct behaviour?
I've tried unexport VAR and bash -c make ... without any luck.
EDIT: I've modified none's recipe to: bash -c "echo $$MAKEOVERRIDES $$MAKEFLAGS $$VAR" ; make ...
This way I found out that VAR is actually being passed through the environment that make creates for the commands to be executed and not through the other variables (the other variables are also passed this way to make).
I think my question now is: how can I create a fresh shell/environment to run my sub make?
EDIT: Someone asked why am I trying to this; I'll try to answer to that here.
I have a "module" which uses a variable named CONFIG. In order to build this module I need to build another partially unrelated "module" which also uses CONFIG, but with a different value. The problem is that when I try to build the "sub-module" CONFIG contains the value of the "super-module." I could specify CONFIG when making the "sub-module" however both modules use many variables with the same name and trying to specify them all would make the modules tightly coupled which is something I cannot afford.
How can this be so difficult...
This is wrong:
none:
$(MAKE) -f Makefile MAKEOVERRIDES= MAKEFLAGS= all
These variables (MAKEOVERRIDES and MAKEFLAGS) are set in the environment by the parent make to be passed down to the sub-makes. Setting overrides on these values inside the recipe won't help, because make has to set the environment for the recipe before it actually starts the commands in the recipe (of course).
You have to override/remove these values in the parent makefile, so that those changes are seen by the parent make before it constructs the sub-make's environment:
MAKEOVERRIDES =
none:
$(MAKE) -f Makefile all
There's no perfect way to do this. However, you can play a trick that will work most of the time:
unexport $(shell echo '$(MAKEOVERRIDES)' | sed 's/=[^ ]*//g')
MAKEOVERRIDES =
The first line tries to unexport all the variables in MAKEOVERRIDES and the second line resets MAKEOVERRIDES. There are a few issues with this. One is that if MAKEOVERRIDES is empty, it will use "unexport" by itself which unexports everything. That can be easily worked around by sticking some bogus variable before the shell function. The other is that if any variable's value contains whitespace, the expansion will consider it a variable to be unexported. That's probably OK, but it's odd.
I can't think of any better way to do it.
You don't really say why you want to do this. Have you considered doing something different, such as running the commands where you want to have a "vanilla" environment using env; for example if you want to run a command with a limited and specific set of env vars, you can run:
test:
env -i PATH='$(PATH)' LANG='$(LANG)' runMyCommand --with --my arguments
Unfortunately some versions of env use - instead of -i; check your man page.
Alternatively, you can try to start a login shell which will re-read the user's shell setup environment from scratch:
test:
/bin/sh -lc 'runMyCommand --with --my arguments'
EDIT: It's difficult because what you're asking to do (restrict the environment of the sub-make) is tricky.
Luckily based on your description, it doesn't seem necessary. Make has a hierarchy of importance for finding variable values. The command line is the highest level (well, there's override but we'll ignore that). After that comes variables set in the makefile itself. And last and lowest comes variables imported from the environment (well, default variables are even lower but we'll ignore that too).
So if your goal is to allow the variables in the sub-makes to not be affected by command line variables given to the upper-level makes, then all this rigmarole of getting the variables out of the environment is not necessary. Variables set in the sub-makefiles will take precedence over the values in the environment. So all you have to do is get rid of the variables set on the command line, which I've already shown how to do above, by setting MAKEOVERRIDES.
In my makefile, I have a variable 'NDK_PROJECT_PATH', my question is how can I print it out when it compiles?
I read Make file echo displaying "$PATH" string and I tried:
#echo $(NDK_PROJECT_PATH)
#echo $(value NDK_PROJECT_PATH)
Both gives me
"build-local.mk:102: *** missing separator. Stop."
Any one knows why it is not working for me?
You can print out variables as the makefile is read (assuming GNU make as you have tagged this question appropriately) using this method (with a variable named "var"):
$(info $$var is [${var}])
You can add this construct to any recipe to see what make will pass to the shell:
.PHONY: all
all: ; $(info $$var is [${var}])echo Hello world
Now, what happens here is that make stores the entire recipe ($(info $$var is [${var}])echo Hello world) as a single recursively expanded variable. When make decides to run the recipe (for instance when you tell it to build all), it expands the variable, and then passes each resulting line separately to the shell.
So, in painful detail:
It expands $(info $$var is [${var}])echo Hello world
To do this it first expands $(info $$var is [${var}])
$$ becomes literal $
${var} becomes :-) (say)
The side effect is that $var is [:-)] appears on standard out
The expansion of the $(info...) though is empty
Make is left with echo Hello world
Make prints echo Hello world on stdout first to let you know what it's going to ask the shell to do
The shell prints Hello world on stdout.
As per the GNU Make manual and also pointed by 'bobbogo' in the below answer,
you can use info / warning / error to display text.
$(error text…)
$(warning text…)
$(info text…)
To print variables,
$(error VAR is $(VAR))
$(warning VAR is $(VAR))
$(info VAR is $(VAR))
'error' would stop the make execution, after showing the error string
from a "Mr. Make post"
https://www.cmcrossroads.com/article/printing-value-makefile-variable
Add the following rule to your Makefile:
print-% : ; #echo $* = $($*)
Then, if you want to find out the value of a makefile variable, just:
make print-VARIABLE
and it will return:
VARIABLE = the_value_of_the_variable
If you simply want some output, you want to use $(info) by itself. You can do that anywhere in a Makefile, and it will show when that line is evaluated:
$(info VAR="$(VAR)")
Will output VAR="<value of VAR>" whenever make processes that line. This behavior is very position dependent, so you must make sure that the $(info) expansion happens AFTER everything that could modify $(VAR) has already happened!
A more generic option is to create a special rule for printing the value of a variable. Generally speaking, rules are executed after variables are assigned, so this will show you the value that is actually being used. (Though, it is possible for a rule to change a variable.) Good formatting will help clarify what a variable is set to, and the $(flavor) function will tell you what kind of a variable something is. So in this rule:
print-% : ; $(info $* is a $(flavor $*) variable set to [$($*)]) #true
$* expands to the stem that the % pattern matched in the rule.
$($*) expands to the value of the variable whose name is given by by $*.
The [ and ] clearly delineate the variable expansion.
You could also use " and " or similar.
$(flavor $*) tells you what kind of variable it is. NOTE: $(flavor)
takes a variable name, and not its expansion.
So if you say make print-LDFLAGS, you get $(flavor LDFLAGS),
which is what you want.
$(info text) provides output.
Make prints text on its stdout as a side-effect of the expansion.
The expansion of $(info) though is empty.
You can think of it like #echo,
but importantly it doesn't use the shell,
so you don't have to worry about shell quoting rules.
#true is there just to provide a command for the rule.
Without that,
make will also output print-blah is up to date. I feel #true makes it more clear that it's meant to be a no-op.
Running it, you get
$ make print-LDFLAGS
LDFLAGS is a recursive variable set to [-L/Users/...]
All versions of make require that command lines be indented with a TAB (not space) as the first character in the line. If you showed us the entire rule instead of just the two lines in question we could give a clearer answer, but it should be something like:
myTarget: myDependencies
#echo hi
where the first character in the second line must be TAB.
#echo $(NDK_PROJECT_PATH) is the good way to do it.
I don't think the error comes from there.
Generally this error appears when you mistyped the intendation : I think you have spaces where you should have a tab.
No need to modify the Makefile.
$ cat printvars.mak
print-%:
#echo '$*=$($*)'
$ cd /to/Makefile/dir
$ make -f ~/printvars.mak -f Makefile print-VARIABLE
Run make -n; it shows you the value of the variable..
Makefile...
all:
#echo $(NDK_PROJECT_PATH)
Command:
export NDK_PROJECT_PATH=/opt/ndk/project
make -n
Output:
echo /opt/ndk/project
This makefile will generate the 'missing separator' error message:
all
#echo NDK_PROJECT_PATH=$(NDK_PROJECT_PATH)
done:
#echo "All done"
There's a tab before the #echo "All done" (though the done: rule and action are largely superfluous), but not before the #echo PATH=$(PATH).
The trouble is that the line starting all should either have a colon : or an equals = to indicate that it is a target line or a macro line, and it has neither, so the separator is missing.
The action that echoes the value of a variable must be associated with a target, possibly a dummy or PHONEY target. And that target line must have a colon on it. If you add a : after all in the example makefile and replace the leading blanks on the next line by a tab, it will work sanely.
You probably have an analogous problem near line 102 in the original makefile. If you showed 5 non-blank, non-comment lines before the echo operations that are failing, it would probably be possible to finish the diagnosis. However, since the question was asked in May 2013, it is unlikely that the broken makefile is still available now (August 2014), so this answer can't be validated formally. It can only be used to illustrate a plausible way in which the problem occurred.
The problem is that echo works only under an execution block. i.e. anything after "xx:"
So anything above the first execution block is just initialization so no execution command can used.
So create a execution blocl
If you don't want to modify the Makefile itself, you can use --eval to add a new target, and then execute the new target, e.g.
make --eval='print-tests:
#echo TESTS $(TESTS)
' print-tests
You can insert the required TAB character in the command line using CTRL-V, TAB
example Makefile from above:
all: do-something
TESTS=
TESTS+='a'
TESTS+='b'
TESTS+='c'
do-something:
#echo "doing something"
#echo "running tests $(TESTS)"
#exit 1
This can be done in a generic way and can be very useful when debugging a complex makefile. Following the same technique as described in another answer, you can insert the following into any makefile:
# if the first command line argument is "print"
ifeq ($(firstword $(MAKECMDGOALS)),print)
# take the rest of the arguments as variable names
VAR_NAMES := $(wordlist 2,$(words $(MAKECMDGOALS)),$(MAKECMDGOALS))
# turn them into do-nothing targets
$(eval $(VAR_NAMES):;#:))
# then print them
.PHONY: print
print:
#$(foreach var,$(VAR_NAMES),\
echo '$(var) = $($(var))';)
endif
Then you can just do "make print" to dump the value of any variable:
$ make print CXXFLAGS
CXXFLAGS = -g -Wall
You could create a vars rule in your make file, like this:
dispvar = echo $(1)=$($(1)) ; echo
.PHONY: vars
vars:
#$(call dispvar,SOMEVAR1)
#$(call dispvar,SOMEVAR2)
There are some more robust ways to dump all variables here: gnu make: list the values of all variables (or "macros") in a particular run.
if you use android make (mka) #echo $(NDK_PROJECT_PATH) will not work and gives you error *** missing separator. Stop."
use this answer if you are trying to print variables in android make
NDK_PROJECT_PATH := some_value
$(warning $(NDK_PROJECT_PATH))
that worked for me
I usually echo with an error if I wanted to see the variable value.(Only if you wanted to see the value. It will stop execution.)
#echo $(error NDK_PROJECT_PATH= $(NDK_PROJECT_PATH))
The following command does it for me on Windows:
Path | tr ; "\n"
I need to execute some make rules conditionally, only if the Python installed is greater than a certain version (say 2.5).
I thought I could do something like executing:
python -c 'import sys; print int(sys.version_info >= (2,5))'
and then using the output ('1' if ok, '0' otherwise) in a ifeq make statement.
In a simple bash shell script it's just:
MY_VAR=`python -c 'import sys; print int(sys.version_info >= (2,5))'`
but that doesn't work in a Makefile.
Any suggestions? I could use any other sensible workaround to achieve this.
Use the Make shell builtin like in MY_VAR=$(shell echo whatever)
me#Zack:~$make
MY_VAR IS whatever
me#Zack:~$ cat Makefile
MY_VAR := $(shell echo whatever)
all:
#echo MY_VAR IS $(MY_VAR)
Beware of recipes like this
target:
MY_ID=$(GENERATE_ID);
echo $MY_ID;
It does two things wrong. The first line in the recipe is executed in a separate shell instance from the second line. The variable is lost in the meantime. Second thing wrong is that the $ is not escaped.
target:
MY_ID=$(GENERATE_ID); \
echo $$MY_ID;
Both problems have been fixed and the variable is useable. The backslash combines both lines to run in one single shell, hence the setting of the variable and the reading of the variable afterwords, works.
I realize the original post said how to get the results of a shell command into a MAKE variable, and this answer shows how to get it into a shell variable. But other readers may benefit.
One final improvement, if the consumer expects an "environment variable" to be set, then you have to export it.
my_shell_script
echo $MY_ID
would need this in the makefile
target:
export MY_ID=$(GENERATE_ID); \
./my_shell_script;
Hope that helps someone. In general, one should avoid doing any real work outside of recipes, because if someone use the makefile with '--dry-run' option, to only SEE what it will do, it won't have any undesirable side effects. Every $(shell) call is evaluated at compile time and some real work could accidentally be done. Better to leave the real work, like generating ids, to the inside of the recipes when possible.
Wrapping the assignment in an eval is working for me.
# dependency on .PHONY prevents Make from
# thinking there's `nothing to be done`
set_opts: .PHONY
$(eval DOCKER_OPTS = -v $(shell mktemp -d -p /scratch):/output)
With GNU Make, you can use shell and eval to store, run, and assign output from arbitrary command line invocations. The difference between the example below and those which use := is the := assignment happens once (when it is encountered) and for all. Recursively expanded variables set with = are a bit more "lazy"; references to other variables remain until the variable itself is referenced, and the subsequent recursive expansion takes place each time the variable is referenced, which is desirable for making "consistent, callable, snippets". See the manual on setting variables for more info.
# Generate a random number.
# This is not run initially.
GENERATE_ID = $(shell od -vAn -N2 -tu2 < /dev/urandom)
# Generate a random number, and assign it to MY_ID
# This is not run initially.
SET_ID = $(eval MY_ID=$(GENERATE_ID))
# You can use .PHONY to tell make that we aren't building a target output file
.PHONY: mytarget
mytarget:
# This is empty when we begin
#echo $(MY_ID)
# This recursively expands SET_ID, which calls the shell command and sets MY_ID
$(SET_ID)
# This will now be a random number
#echo $(MY_ID)
# Recursively expand SET_ID again, which calls the shell command (again) and sets MY_ID (again)
$(SET_ID)
# This will now be a different random number
#echo $(MY_ID)
Here's a bit more complicated example with piping and variable assignment inside recipe:
getpodname:
# Getting pod name
#eval $$(minikube docker-env) ;\
$(eval PODNAME=$(shell sh -c "kubectl get pods | grep profile-posts-api | grep Running" | awk '{print $$1}'))
echo $(PODNAME)
I'm writing an answer to increase visibility to the actual syntax that solves the problem. Unfortunately, what someone might see as trivial can become a very significant headache to someone looking for a simple answer to a reasonable question.
Put the following into the file "Makefile".
MY_VAR := $(shell python -c 'import sys; print int(sys.version_info >= (2,5))')
all:
#echo MY_VAR IS $(MY_VAR)
The behavior you would like to see is the following (assuming you have recent python installed).
make
MY_VAR IS 1
If you copy and paste the above text into the Makefile, will you get this? Probably not. You will probably get an error like what is reported here:
makefile:4: *** missing separator. Stop
Why: Because although I personally used a genuine tab, Stack Overflow (attempting to be helpful) converts my tab into a number of spaces. You, frustrated internet citizen, now copy this, thinking that you now have the same text that I used. The make command, now reads the spaces and finds that the "all" command is incorrectly formatted. So copy the above text, paste it, and then convert the whitespace before "#echo" to a tab, and this example should, at last, hopefully, work for you.
In the below example, I have stored the Makefile folder path to LOCAL_PKG_DIR and then use LOCAL_PKG_DIR variable in targets.
Makefile:
LOCAL_PKG_DIR := $(shell eval pwd)
.PHONY: print
print:
#echo $(LOCAL_PKG_DIR)
Terminal output:
$ make print
/home/amrit/folder
From the make manual
The shell assignment operator ‘!=’ can be used to execute a shell script and set a >variable to its output. This operator first evaluates the right-hand side, then passes >that result to the shell for execution. If the result of the execution ends in a >newline, that one newline is removed; all other newlines are replaced by spaces. The >resulting string is then placed into the named recursively-expanded variable. For >example:
hash != printf '\043'
file_list != find . -name '*.c'
source