Having an issue while installing jmeter.bat file in jmeter 4.0.I have installed jdk 8. I am getting the below error when i open the jmeter.bat file.
'findstr' is not recognized as an internal or external command,
operable program or batch file.
Not able to find Java executable or version. Please check your Java installation.
errorlevel=2
You probably removed C:\Windows\System32 folder from your PATH, you can add it back as
set PATH=%SYSTEM32%;c:\java\bin;%PATH%
change this c:\java to the real path of your JDK or JRE installation, once done you should be able to execute JMeter from that cmd or powershell window.
Also be aware that according to 9 Easy Solutions for a JMeter Load Test “Out of Memory” Failure article you should always be using the latest version of JMeter so consider upgrading to JMeter 5.3 (or whatever is the latest stable JMeter version which is available at Downloads page), now it seems to be just right moment for this
Related
While running bat file in jmeter it gives me Can't find dependent libraries
errorlevel=1 error. Can anyone pls provide me the solution
I tried to run jmeter
Can't find dependent libraries is one of error messages for the UnsatisfiedLinkError which happens when a .dll (or .so) file is not in the java.library.path
JMeter per se doesn't load any native libraries (at least as of JMeter 5.5) so if you're using a plugin which does - check its documentation regarding how the native libraries need to be provided.
If you're not using any plugins the error means that your Java installation is broken somehow, I would suggest performing clean installation of the JDK
I just tried to install JMeter and I have downloaded the zip file from " download_jmeter.cgi". I have downloaded both file and unzip it, But in the bin, jmeter.bat is not showing to work on GUI mode.
I tried to learn from "https://www.guru99.com/guide-to-install-jmeter.html".
Please give an advise to work it.
Am very new to JMeter.
Make sure to install Java 8 or higher and to choose either 64-bit JDK or Server JRE
Make sure to download the binary, not the "source"
Just in case you can use the following link in order to obtain latest JMeter 4.0
https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-4.0.zip
I would recommend running jmeter.bat not by double-clicking it, but using cmd.exe or Poweshell, this way you will be able to see if there are any errors. Here are Powershell commands to download, unpack and run JMeter
Download:
Invoke-WebRequest -Uri "https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-4.0.zip" -OutFile jmeter.zip
Unpack: Expand-Archive -Path jmeter.zip
Run: cd jmeter\apache-jmeter-4.0\bin\; ./jmeter.bat
Go to bin directory , jmeter\apache-jmeter-5.1.1\bin
Run jmeter (windows batch file)
It will open GUI .
If you have JMeter (Windows batch file) that's good to go. In some system, Jmeter bat file comes only in Jmeter ( it should have a sitting icon, and it should be a windows batch file)
Follow below youtube video
https://www.youtube.com/watch?v=Go92Nj_u7nw
when running the batch file of jmeter(4.0 version) for windows 7 64-bit,I am getting the following error findstr is not recognized as inetrnal or external command,operable program or batch file.not able to find java executable or version
I have set the System variables also as "C:\apache-jmeter-4.0\bin" and also checked for java -version and JDk(9.4 version) is installed.
According to microsoft answer you need to add to Path enviroment vatiable also C:\Windows\System32
I have a question about Jmeter on MAC.
1. I got new computer and try to download Jmeter, all the downloads from apach is not opened.
2. I somehow managed via guide on net to download Jmeter 3.1, but in mac how I find the lib folder? and the EXT folder, this is much more harder than in win computer, I am new in mac and not understand where to put jars
Step 1 : Got to Jmeter site and download binaries . Here . After this Unzip at some preferred location.
Step 2 : Once downloaded , open ur terminal in MAC. Got to the location where the Jmeter is. See the bin folder. Go inside it. Then type sh ./jmeter.sh . Basically the bin folder have jmeter.sh file which executes it.
You need not install any Jmeter. This approach works fine. Also, make sure you have java installed. IF you are not sure, Here Note that you must have Java 8 or Java 9 for Jmeter 4. Any specific reasons why use Jmeter 3.1 ?
Download latest Java for Mac from Oracle website
Double click the .dmg and follow installation wizard steps
Download JMeter version of your choice from https://archive.apache.org/dist/jmeter/binaries/. Keep in mind that according to JMeter Best Practices it is recommended to use the latest version of JMeter
Unpack JMeter and open its "bin" folder in Terminal
Run JMeter as ./jmeter
"lib" folder will be in its usual location
If you installed JMeter 3.1 using i.e. Homebrew, you will find "lib" folder under
/usr/local/Cellar/jmeter/3.1/libexec/lib/
You may also find How to Open JMX Files on a Mac in 1 (Double) Click guide useful - it contains instructions how to associate JMeter with .jmx files on Mac so you will be able to open them by just clicking them in Finder.
On Mac, download the latest JMeter 4.0 tar.gz file and expand it.
Install Java 8 and you'll be able to run it.
Alternatively you can use Homebrew as described here:
https://www.ubik-ingenierie.com/blog/using-homebrew-to-install-and-configure-jmeter-under-mac-osx/
I recently installed the springsource tool suite plugin for eclipse, running on windows 7. But when I open a command prompt (by typing cmd in the windows start menu) and type in:
mvn --version
I get the following response:
'mvn' is not recognized as an internal or external command, operable program, or batch file.
So I then downloaded the stand-alone version of springsource tool suite, which is not what I want. And nonetheless, I still get the same response on the command line when I type in mvn --version. Can anyone tell me how to fix this problem?
I get the same response when I type in java -version . So this might be a command prompt problem. I a following the exact syntax from web tutorials.
EDIT:
I just tried to download m2e in the eclipse marketplace, but got the message that there is nothing new to install. This seems to indicate that I have maven installed, so then how do I access it via the command line in windows 7?
You have to configure your Maven environment variable to be able to use it in the command prompt.
In your case there's no need to download the maven binars because it comes with STS, just find the Maven folder inside the STS directory.
"___" is not recognized as an internal or external command
is shown when program is not installed or the path of that program is not set (to execute from other path).
remember, in "STS", maven is not configured to work out of STS (and terminal usage is out of STS usage).
we have to install it.
maven download link is here
download latest maven from here
extract it where ever you want.
i extracted as below (see the bin,boot,conf,... folders are shown below as in the image):
as this maven download is extracted from zip file (it is not setup), you will have to add this extracted path to "PATH" variable in windows environment.
follow this to set environment path:
now "mvn" command must work.
but
in my case i had to restart STS (spring tool suit) for this to work