When i try to send a new message on pressing enter . I am getting message id as "0" when i try to log the message in message.js file . But only for a few messages i am getting id as "0" but database is not showing any entry with message id as "0" .
const {msg} = this;
console.log("tagamsg",msg._id);
id was being set as 0 due to another event that was being called at the same time .
Related
Regarding: “Sending response back to the out/reply queue.”
There is a requirement to send the response back to a different queue (reply queue).
While sending the response, we have to use the correlation and message id from the request message and pass it to the reply queue as header. I suspect the format of correlation/message id is wrong.
While reading the message, the correlation id and message id format are as below:
MessageId = “ID:616365323063633033343361313165646139306638346264”
CorrelationId = “ID:36626161303030305f322020202020202020202020202020”
While sending the back to out/reply queue, we are passing these ids as below:
ITextMessage txtReplyMessage = sessionOut.CreateTextMessage();
txtReplyMessage.JMSMessageID = “616365323063633033343361313165646139306638346264”;
txtReplyMessage.JMSCorrelationID = “36626161303030305f322020202020202020202020202020”;
txtReplyMessage.Text = sentMessage.Contents;
txtReplyMessage.JMSDeliveryMode = DeliveryMode.NonPersistent;
txtReplyMessage.JMSPriority = sentMessage.Priority;
messagePoducerOut.Send(txtReplyMessage);
Please note:
With the XMS.NET library, we need to pass the correlation and message id in string format as per shown above
With MQ API’s (which we were using earlier) passing the correlation and message ids we use to send in bytes format like below:
MQMessage queueMessage = new MQMessage();
string[] parms = document.name.Split('-');
queueMessage.MessageId = StringToByte(parms[1]);
queueMessage.CorrelationId = StringToByte(parms[2]);
queueMessage.CharacterSet = 1208;
queueMessage.Encoding = MQC.MQENC_NATIVE;
queueMessage.Persistence = 0; // Do not persist the replay message.
queueMessage.Format = "MQSTR ";
queueMessage.WriteString(document.contents);
queueOut.Put(queueMessage);
queueManagerOut.Commit();
Please help to troubleshoot the problem.
Troubleshooting is a bit difficult because you haven’t clearly specified the trouble (is there an exception, or is the message just not be correlated successfully?).
In your code you have missed to add the “ID:” prefix. However, to address the requirements, you should not need to bother too much about what is in this field, because you simply need to copy one value to the other:
txtReplyMessage.JMSCorrelationID = txtRequestMessage.JMSMessageID
A bit unclear what the issue is. Are you able to run the provided examples in the MQ tools/examples? This approach uses tmp queues(AMQ.*) as JMSReplyTo
Start the "server" application first.
Request/Response Client: "SimpleRequestor"
Request/Response Server: "SimpleRequestorServer"
You can find the exmaples at the default install location(win):
"C:\Program Files\IBM\MQ\tools\dotnet\samples\cs\xms\simple\wmq"
The "SimpleMessageSelector" will show how to use the selector pattern.
Note the format on the selector: "JMSCorrelationID = '00010203040506070809'"
IBM MQ SELECTOR
I need a cron job to obtain only the new emails received in a Exchange server since the last time it synchronized.
I coded the same with imap servers, and it was easy to get the emails since an ID. So I save the last ID at the end of the for cycle to the DB, and resume from that ID the next time the cron job executes.
I tried the same in Exchange, but I get the following error:
Failed to search for messages with "ErrorInvalidValueForProperty: El valor especificado no es válido para la propiedad."
To get the ItemId in Exchange I'm using the following code, with no error:
$item->ItemId->Id;
It returns something like:
AAMkADk3ZWRhY2VmLTdiY2UtNDkxYy04ZDMyLWZiZWIyYTQ4ZjQyMABGAAAAAAChH5wDkXAqTZaoH1oRodz8BwD8BvGliMkPTK/cnnmZJDPUAAAAvGXfAAD8BvGliMkPTK/cnnmZJDPUAAAAvJN5AAA=
To find the emails I'm trying the following code (with the error mentioned before):
$request = new FindItemType();
$request->ParentFolderIds = new NonEmptyArrayOfBaseFolderIdsType();
$request->Traversal = ItemQueryTraversalType::SHALLOW;
$greater_than = new IsGreaterThanOrEqualToType();
$greater_than->FieldURI = new PathToUnindexedFieldType();
$greater_than->FieldURI->FieldURI = UnindexedFieldURIType::ITEM_ID;
$greater_than->FieldURIOrConstant = new FieldURIOrConstantType();
$greater_than->FieldURIOrConstant->Constant = new ConstantValueType();
$greater_than->FieldURIOrConstant->Constant->Value = $UID;
Thanks!!
The EWS ItemId isn't a searchable property because it doesn't need to be eg you can just Bind to the Id in question to see if the Item exists. If it nolonger exists then you will get a specific error to tell you that. The SyncFolderItems operation is probably a more appropriate method to use however https://learn.microsoft.com/en-us/exchange/client-developer/web-service-reference/syncfolderitems-operation.
I have a MQ Message. In that, I add an Integer property called "Count" with the value 10. Then I reassign the value to 5 for the same property.But it is not getting updated.
MQMessage message = new MQMessage();
message.writeString("Test Message");
message.setIntProperty("Count", 10);
System.out.println("Count is" + message.getIntProperty("Count")); -->Prints 10
message.setIntProperty("Count",5);
System.out.println("Count is" + message.getIntProperty("Count")); --> Prints 10..But I am expecting 5..
Have you tried putting the message to a queue? If you actually put the message to a queue and get the same message back, you will see that updated value of the property is set in the message i.e. value of "Count" property will be 5, instead of 10.
I am trying to send an email with multiple attachments using the VB6 MAPIMessages control.
1) I am able to use this control to send a single attachment but it displays an error saying "Attachment not found", if I try to send more than one file.
2) I also need to suppress the warning message when I try to send an email
Any ideas?
Here's the code:
MAPISession1.SignOn
MAPIMessages1.SessionID = MAPISession1.SessionID
MAPIMessages1.Compose
MAPIMessages1.RecipDisplayName = "abbid_siddiqui#hotmail.com"
MAPIMessages1.MsgSubject = "MAPI subject with attachments"
MAPIMessages1.MsgNoteText = "This is atest"
MAPIMessages1.AttachmentIndex = 0
MAPIMessages1.AttachmentName = "test.csv"
MAPIMessages1.AttachmentPathName = "C:\test.csv"
MAPIMessages1.AttachmentIndex = 1
MAPIMessages1.AttachmentName = "holidays_2013.xls"
MAPIMessages1.AttachmentPathName = "E:\holidays_2013.xls"
MAPIMessages1.ResolveName
'Send the e-mail message to the Recipient
MAPIMessages1.Send
Try setting the AttachmentPosition property to the same value as the AttachmentIndex
I am having an issue with clicking on an OK button in a confirming dialog. This is what I have used but it isn't activating the OK nor is it getting the message property from the dialog. Any ideas as to what is wrong OR better yet, do you have any code that clicks on OK in a confirm dialog?
var confirmHandler = new ConfirmDialogHandler();
using (new UseDialogOnce(newIee.DialogWatcher, confirmHandler))
{
//Click EXIT - CT__Exit
Regex ex = new Regex("CT__Exit");
newIee.Image(Find.ById(ex)).ClickNoWait();
string temp = confirmHandler.Message;
confirmHandler.WaitUntilExists();
Assert.AreEqual(
"Warning! Policy Number or Transaction Type was changed."
+ " Are you sure you want to exit the case?",
confirmHandler.Message);
confirmHandler.OKButton.Click();
}
The script is failing here...confirmHandler.WaitUntilExists();