I'm trying to compile VLC, I already did ./configure, exported PKG_CONFIG_LIBDIR and when I try to configure.sh, I get:
64-pc-linux-gnu
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-linux-gnu-strip... x86_64-linux-gnu-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
configure: error: source directory already configured; run "make distclean" there first
When I run "make distclean", I get the
make: *** No rule to make target 'distclean'. Stop.
What can I do?
This error is generated when the build is out of source directory and the source directory is configured, e.g. there exists config.status file.
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
fi
Either run make distclean in source directory or remove config.status from there.
Related
I'm trying to build a makefile project in eclipse under windows but the build fails (Project > Build Project). However, if I navigate to the build directory in the msys2 terminal and call "make" everything runs just fine.
To figure out why building in eclipse does not work I am now trying to find the difference between using make in terminal and in eclipse.
Up to the point where the build fails the console output of eclipse is the same as the output in msys2 terminal:
This is the console output in eclipse:
make
Making all in i386-rtems5/c
make[1]: Entering directory '/c/rt5/rtems/kernel/pc/i386-rtems5/c'
Making all in .
make[2]: Entering directory '/c/rt5/rtems/kernel/pc/i386-rtems5/c'
Configuring RTEMS_BSP=pc686
checking for gmake... no
checking for make... make
checking build system type... x86_64-w64-mingw32
checking host system type... i386-pc-rtems5
checking rtems target cpu... i386
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for i386-rtems5-strip... i386-rtems5-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for RTEMS_BSP... pc686
checking whether CPU supports libposix... yes
configure: setting up make/custom
configure: creating make/pc686.cache
make[3]: Entering directory '/c/rt5/rtems/kernel/pc/i386-rtems5/c/pc686'
make[3]: Leaving directory '/c/rt5/rtems/kernel/pc/i386-rtems5/c/pc686'
checking for RTEMS_CPU_MODEL...
checking for RTEMS_BSP_FAMILY... pc386
checking for CPU_CFLAGS... (cached) -mtune=pentiumpro -march=pentium
checking for CFLAGS_OPTIMIZE_V... (cached) -O2 -g -ffunction-sections -fdata-sections
checking for style of include used by make... GNU
checking for i386-rtems5-gcc... i386-rtems5-gcc
checking for i386-rtems5-gcc... (cached) i386-rtems5-gcc
checking whether the C compiler works... no
configure: error: in `/c/rt5/rtems/kernel/pc/i386-rtems5/c/pc686':
configure: error: C compiler cannot create executables
See `config.log' for more details
make[2]: *** [Makefile:731: pc686] Error 1
make[2]: Leaving directory '/c/rt5/rtems/kernel/pc/i386-rtems5/c'
make[1]: *** [Makefile:289: all-recursive] Error 1
make[1]: Leaving directory '/c/rt5/rtems/kernel/pc/i386-rtems5/c'
make: *** [Makefile:410: all-recursive] Error 1
"make" terminated with exit code 2. Build might be incomplete.
This is the output in the msys2 terminal:
$ make
Making all in i386-rtems5/c
make[1]: Verzeichnis „/c/rt5/rtems/kernel/pc/i386-rtems5/c“ wird betreten
Making all in .
make[2]: Verzeichnis „/c/rt5/rtems/kernel/pc/i386-rtems5/c“ wird betreten
Configuring RTEMS_BSP=pc686
configure: loading site script /mingw64/etc/config.site
checking for gmake... no
checking for make... make
checking build system type... x86_64-w64-mingw32
checking host system type... i386-pc-rtems5
checking rtems target cpu... i386
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for i386-rtems5-strip... i386-rtems5-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for RTEMS_BSP... pc686
checking whether CPU supports libposix... yes
configure: setting up make/custom
configure: creating make/pc686.cache
make[3]: Entering directory '/c/rt5/rtems/kernel/pc/i386-rtems5/c/pc686'
make[3]: Leaving directory '/c/rt5/rtems/kernel/pc/i386-rtems5/c/pc686'
checking for RTEMS_CPU_MODEL...
checking for RTEMS_BSP_FAMILY... pc386
checking for CPU_CFLAGS... (cached) -mtune=pentiumpro -march=pentium
checking for CFLAGS_OPTIMIZE_V... (cached) -O2 -g -ffunction-sections -fdata-sections
checking for style of include used by make... GNU
checking for i386-rtems5-gcc... i386-rtems5-gcc
checking for i386-rtems5-gcc... (cached) i386-rtems5-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
[...]
As far as I can see in both cases make is called but with different results. The Makefile is also the same in both cases.
What could cause this?
The difference between invoking make in eclipse and in msys2 terminal is that it is run in different environments. To ensure that I get the same result with both methods I had to make sure that my windows PATH contained the right entries. To find out what entries I had to add to PATH i examined the config.log for the failing case as well as for the successful case.
Additionally I had to run eclipse as administrator as it had no privileges to create temporary files.
I found an error while trying to install hydra under Windows via Cygwin. What should I do?
$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... no
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... missing
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
By default, Cygwin doesn't install a compiler. I suggest installing "gcc" from Cygwin's setup. (You may need other packages, but start with "gcc" and add packages are needed.)
this is the result from ./configue:
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
Using git revision: 4.00.00alpha-358-g362b68e
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking whether make supports nested variables... yes
checking dependency style of g++... gcc3
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
./configure: line 4250: syntax error near unexpected token `-mavx,'
./configure: line 4250: `AX_CHECK_COMPILE_FLAG(-mavx, avx=true, avx=false)'
this is the error that i get after running make:
make: *** No targets specified and no makefile found. Stop.
thus sudo make install doesnt work either
I was getting the same error. Below is what worked for me.
cd tesseract-3.05.00
./autogen.sh
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
LIBLEPT_HEADERSDIR=/usr/local/include ./configure --with-extra-includes=/usr/local/include --with-extra-libraries=/usr/local/lib
LDFLAGS="-L/usr/local/lib" CFLAGS="-I/usr/local/include" make
make install
ldconfig
See below link for full script, that includes installing Leptonica and dependencies properly.
https://github.com/EisenVault/install-tesseract-redhat-centos/blob/master/install-tesseract.sh
If configure fails with errors like these, then double check you have installed autoconf-archive and restart Tesseract installation process (./autogen.sh,./configure` ...)
And make sure that you have installed the latest version of laptonica, in my case it was Laptonica-1.74, as it is required for the installation process.
Reference to tesseract-ocr compiling
So here's the situation. I want to setup a portable programming environment by installing my programming stuff (Vim, Clang, Git, GCC) in a single folder that I can create on any Mac. I am installing everything in /opt, which isn't there by default and I should have write permissions to create. I got Vim, Clang, and Git working by downloading the Xcode Command Line Tools and a program that can extract the contents of the PKG's. I put everything in their respective folders in /opt, e.g /opt/usr/bin. They are all doing dandy.
Here's the problem. I am trying to get GCC to work. I downloaded the OSX GCC Installer and did the same technique with GCC-4.2. The problem is that when I do a test compile, I run this. Edit: I get the same error message if I do CC=gcc-4.2
./configure --prefix=/opt/usr/bin
and receive
checking build system type... x86_64-apple-darwin11.4.2
checking host system type... x86_64-apple-darwin11.4.2
checking target system type... x86_64-apple-darwin11.4.2
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for a sed that does not truncate output... /usr/bin/sed
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking for libatomic support... yes
checking for libcilkrts support... yes
checking for libitm support... yes
checking for libsanitizer support... yes
checking for libvtv support... no
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/opt/gcc-master':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
This is strange because GCC-4.2 is in my $PATH
echo $PATH
/opt/usr/bin:/opt/usr/:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
cd /opt/usr/bin ; ls | grep gcc
gcc
gcc-4.2
i686-apple-darwin11-gcc-4.2.1
FYI: 'gcc' is a symlink that doesn't point to anything.
which gcc-4.2
/opt/usr/bin/gcc-4.2
I solved this by adding this to my .zshrc. It forces any configure script to look for gcc-4.2 instead of gcc.
CC=/opt/usr/bin/gcc-4.2
configure: error: no acceptable C compiler found in $PATH
Before executing the ./configure command, i used the command:
sudo apt install gcc
And the error 'no acceptable ...' is solved.
As per the installation instruction given on the gcc wiki site- http://gcc.gnu.org/wiki/InstallingGCC,
tar xvzf gcc-4.8.1.tar.gz
cd gcc-4.8.1
./contrib/download_prerequisites
cd ..
mkdir objdir
cd objdir
$PWD/../gcc-4.8.1/configure --prefix=$HOME/gcc-4.8.1
make
make install
I was trying to install gcc in my laptop. But, I am getting the below error while installing just after entering the configure command.
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for a sed that does not truncate output... /usr/bin/sed
checking for gawk... gawk
checking for libatomic support... yes
checking for libitm support... yes
checking for libsanitizer support... yes
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/home/fedora-19/Downloads/objdir':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
And after entering the make command below error is being displayed.
make: *** No targets specified and no makefile found. Stop.
Please guide on this issue.
I think there is an easiest way to install gcc on Fedora 19.
Did you try with yum ? With something like sudo yum install gcc
Your error means that the makefile which must be generated during the configure command doesn't exist because you don't have any c compiler. You can see details on the config.log file.
You can execute following command to install GCC compiler in fedora:
yum install gcc
After executing this, it shows you a Total size and Total download size.
Or download gcc-4.4.7-3.el6.x86_64 package from web and execute:
rpm -ivh gcc-4.4.7-3.el6.x86_64*
It may work.
This solves the problem,
$PWD/../configure
make
make install