Using JDBC for establish Connection - jdbc

i am faacing a trouble when trying to establish connection using JDBC when i run the code from google dev :
var server = 'serverip';
var port = 3306;
var dbName = 'dbname';
var username = 'dbuser';
var password = 'dbpass';
var url = 'jdbc:Mysql://'http://serverip:3306'/'+ dbname;
function readData() {
var conn = Jdbc.getConnection(url, username, password);
var stmt = conn.createStatement();
var results = stmt.executeQuery('SELECT * FROM mt_merchant');
var metaData=results.getMetaData();
var numCols = metaData.getColumnCount();
var spreadsheet = SpreadsheetApp.getActive();
var sheet = spreadsheet.getSheetByName('DB Data');
sheet.clearContents();
var arr=[];
for (var col = 0; col < numCols; col++) {
arr.push(metaData.getColumnName(col + 1));
}
sheet.appendRow(arr);
while (results.next()) {
arr=[];
for (var col = 0; col < numCols; col++) {
arr.push(results.getString(col + 1));
}
sheet.appendRow(arr);
}
results.close();
stmt.close();
sheet.autoResizeColumns(1, numCols+1);
}
So that means that connection cannot be establish but i cannot figure out where is the problem ?

Problem has been solved !
i forgot to authorize ip ranges X) ! Thank u !

Related

Is there a way to speed up this for loop in Google Script?

I have a for loop which is working on my google sheet but it takes around 5 minutes to filter through the 2100 rows of data. I have read about using filters and getting rid of the for loop all together but I'm fairly new to coding in Google Script and haven't been able to get my head around the syntax for this. Any advice greatly appreciated.
Code below:
function Inspect() {a
var sSheet = SpreadsheetApp.getActiveSpreadsheet();
var srcSheet = sSheet.getSheetByName("Inventory");
var tarSheet = sSheet.getSheetByName("Inspections");
var lastRow = srcSheet.getLastRow();
for (var i = 2; i <= lastRow; i++) {
var cell = srcSheet.getRange("A" + i);
var val = cell.getValue();
if (val == true) {
var srcRange = srcSheet.getRange("B" + i + ":I" + i);
var clrRange = srcSheet.getRange("A" + i);
var tarRow = tarSheet.getLastRow();
tarSheet.insertRowAfter(tarRow);
var tarRange = tarSheet.getRange("A" + (tarRow+1) + ":H" + (tarRow+1));
var now = new Date();
var timeRange = tarSheet.getRange("I"+(tarRow+1));
timeRange.setValue(now);
srcRange.copyTo(tarRange);
clrRange.clear();
//tarRange.activate();
timeRange.offset(0, 1).activate();
}
}
};
Yes, to speed-up you will need to get all the values first and apply your logic to the obtained 2D-arrays instead of cells, at the end you will use setValues to update your sheet. I would go for something like this:
function Inspect() {
var sSheet = SpreadsheetApp.getActiveSpreadsheet();
var srcSheet = sSheet.getSheetByName("Inventory");
var tarSheet = sSheet.getSheetByName("Inspections");
var srcLastRow = srcSheet.getLastRow();
var tarLastRow = tarSheet.getLastRow();
var srcArray = srcSheet.getRange(1,1,srcLastRow,9).getValues();//(A1:I(lastrow))
var tarArray = tarSheet.getRange(1,1,tarLastRow,9).getValues();//(A1:I(lastrow))
for (var i = 1; i < srcArray.length; i++) {
var val = srcArray[i][0];
if (val == true) {
var copyValues = srcArray[i].slice(1);//Get all elements from the row excluding first column (srcSheet.getRange("B" + i + ":I" + i);)
var now = new Date();
copyValues[8]=now;//set the time on column 9 (array starts at position 0!)
var tarNewLine = copyValues;
tarArray.push(tarNewLine);
//clear values on source (except column A):
for(var j=1;j<srcArray[i].length;j++){
srcArray[i][j]="";
}
}
}
tarSheet.clear();
tarSheet.getRange(1, 1,tarArray.length,tarArray[0].length).setValues(tarArray);
srcSheet.clear();
srcSheet.getRange(1, 1,srcArray.length,srcArray[0].length).setValues(srcArray);
};
You cannot get around a loop, but you should reduce the number of calls to the SpreadsheetApp to a minimum, see Apps Script Best Practices
It is not the for loop, but those calls that make your code slow. Instead, work with arrays as much as you can. Loops become of a problem if they are nested - this is also something you should avoid.
Sample how to perform most calls to SpreadsheetApp outside of the loop and work with arrays:
function Inspect() {
var sSheet = SpreadsheetApp.getActiveSpreadsheet();
var srcSheet = sSheet.getSheetByName("Inventory");
var tarSheet = sSheet.getSheetByName("Inspections");
var lastRow = srcSheet.getLastRow();
var Acolumn = srcSheet.getRange("A2:A" + lastRow);
var Avalues = Acolumn.getValues();
var srcRange = srcSheet.getRange("B2:I" + lastRow);
var srcValues = srcRange.getValues();
var array = [];
var now = new Date();
for (var i = 0; i < lastRow-1; i++) {
var val = Avalues[i][0];
if (val == true) {
srcValues[i].push(now);
array.push(srcValues[i]);
var clrRange = Acolumn.getCell(i+1, 1);
clrRange.clear();
}
}
var tarRow = tarSheet.getLastRow();
tarSheet.insertRowAfter(tarRow);
if(array.length!=0){
var tarRange = tarSheet.getRange("A" + (tarRow+1) + ":I" + (tarRow + array.length));
tarRange.setValues(array);
}
};

I have a google script that creates QR codes and Barcode. the QR Codes show up twice. Once where its suppose to and then at the end of the document

The code below generates a label that has a QR Code and barcode. Currently I am trying to get both to work. They both show up in the label but when it does the QR code will be added in the correct spot but also will add extra qr codes on the last label generated. The two qr codes at the end are itemnum qr codes and they are not suppose to be there. It normally puts them ontop of each other i moved them so people could see. The barcodes generate just fine but they don't scan
TEST SCRIPT here is a link to test it.. This is a test script and not part of a business so its easy to do. Basically what needs done is click on My Custom Menu and select reset labels. Once the labels are created you can go to the labels tab and select a few labels with serial numbers then go back to the menu and select create labels for selected items.
//####################################### Create Zebra Label #########################
function createZebraLabel(monthlySheet, newSheetName) {
var parentFolder = DriveApp.getFolderById('1mUPLw1PSi-guH19uJPCPWmogkpdckLcW');
var createdoc = DocumentApp.create('Zebra Label').getId();
doc = DocumentApp.openById(createdoc);
var id = createdoc;
var docFile = DriveApp.getFileById(doc.getId());
var target = parentFolder;
var file1 = DriveApp.getFileById(id);
var mkfile1 = file1.makeCopy(newSheetName, target).getId();
doc = DocumentApp.openById(mkfile1);
docFile.setTrashed(true);
//325
var body = doc.getBody().setPageWidth(325).setPageHeight(180).setMarginTop(.2).setMarginBottom(.2);
// var body = doc.getBody().setPageWidth(144).setPageHeight(144).setMarginTop(.2).setMarginBottom(.2);
var sourceSpreadSheet = SpreadsheetApp.openById(monthlySheet);
var ss = sourceSpreadSheet.getSheetByName('Sheet1');
var startRow = 1; // First row of data to process
var numRows = 250; // Number of rows to process
var startColumn = 1; // A=1 B=2
var numColumns = 5; // Number of columns to process
var dataRange = ss.getRange(startRow, startColumn, numRows, numColumns);
var data = dataRange.getValues();
for (var i = 1; i < data.length; ++i) {
var row = data[i];
var actualrow = i;
var itemnum = row[0]; // A column
var desc = row[1]; // B column
var serial = row[2]; // D column
var bin = row[3]; // D column
var qty = row[4];
var styleLeft = {};
styleLeft[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.LEFT;
styleLeft[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
styleLeft[DocumentApp.Attribute.FONT_SIZE] = 14;
styleLeft[DocumentApp.Attribute.BOLD] = true;
var styleRight = {};
styleRight[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.RIGHT;
styleRight[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
styleRight[DocumentApp.Attribute.FONT_SIZE] = 14;
styleRight[DocumentApp.Attribute.BOLD] = true;
var itemBarcode = {};
itemBarcode[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.LEFT;
itemBarcode[DocumentApp.Attribute.FONT_FAMILY] = 'Libre Barcode 39 Extended Text';
itemBarcode[DocumentApp.Attribute.FONT_SIZE] = 25;
itemBarcode[DocumentApp.Attribute.BOLD] = false;
var serialBarcode = {};
serialBarcode[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.CENTER;
serialBarcode[DocumentApp.Attribute.FONT_FAMILY] = 'Libre Barcode 39 Extended Text';
serialBarcode[DocumentApp.Attribute.FONT_SIZE] = 20;
serialBarcode[DocumentApp.Attribute.BOLD] = false;
var nospace = {};
nospace[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.RIGHT;
nospace[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
nospace[DocumentApp.Attribute.FONT_SIZE] = 1;
nospace[DocumentApp.Attribute.BOLD] = true;
var text = body.editAsText();
var itemqrcode = UrlFetchApp.fetch('https://chart.googleapis.com/chart?chs=70x70&cht=qr&chl=' + itemnum);
var serialqrcode = UrlFetchApp.fetch('https://chart.googleapis.com/chart?chs=70x70&cht=qr&chl=' + serial);
if (itemnum != '') {
//#################### SERIAL ###################
if (serial != '') { // SERIAL NUMBER
body.appendParagraph('').setAttributes(nospace);
var paragraph = body.appendParagraph('Item Number: ' + itemnum).setAttributes(styleLeft);
paragraph.addPositionedImage(itemqrcode.getBlob()).setLayout(DocumentApp.PositionedLayout.WRAP_TEXT)
body.appendParagraph('*' + itemnum + '*').setAttributes(itemBarcode);
body.appendParagraph('\n\n').setAttributes(nospace).appendHorizontalRule();
//description
body.appendParagraph(desc).setAttributes(styleLeft);
body.appendParagraph('').setAttributes(nospace);
//serials
body.appendParagraph('').setAttributes(nospace).appendHorizontalRule();
var paragraph = body.appendParagraph('Serial Number: ' + serial).setAttributes(styleRight);
body.appendParagraph('*' + serial + '*').setAttributes(serialBarcode);
paragraph.addPositionedImage(serialqrcode.getBlob()).setLayout(DocumentApp.PositionedLayout.WRAP_TEXT)
body.appendParagraph('').setAttributes(nospace);
} else if (serial == '') { // NO SERIAL NUMBER
var styleCenter = {};
styleCenter[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.CENTER;
styleCenter[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
styleCenter[DocumentApp.Attribute.FONT_SIZE] = 18;
styleCenter[DocumentApp.Attribute.BOLD] = true;
var itemBarcode = {};
itemBarcode[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.CENTER;
itemBarcode[DocumentApp.Attribute.FONT_FAMILY] = 'Libre Barcode 39 Extended Text';
itemBarcode[DocumentApp.Attribute.FONT_SIZE] = 35;
itemBarcode[DocumentApp.Attribute.BOLD] = false;
var styleLocation = {};
styleLocation[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.LEFT;
styleLocation[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
styleLocation[DocumentApp.Attribute.FONT_SIZE] = 12;
styleLocation[DocumentApp.Attribute.BOLD] = true;
body.appendParagraph('').setAttributes(nospace);
var paragraph = body.appendParagraph('Item Number: ' + itemnum).setAttributes(styleLeft);
body.appendParagraph('*' + itemnum + '*').setAttributes(itemBarcode);
body.appendParagraph('\n').setAttributes(nospace).appendHorizontalRule();
//description
body.appendParagraph(desc).setAttributes(styleLeft);
body.appendParagraph('').setAttributes(nospace).appendHorizontalRule();
body.appendParagraph('Location: ' + bin + ' Qty: ' + qty).setAttributes(styleLocation);
body.appendParagraph('\n').setAttributes(nospace);
}
body.appendPageBreak();
}
}
var googledoc = doc.getUrl();
FinishedGoogleDoc(googledoc);
}
Below is my solution that does work.
/
/####################################### Create Zebra Label #########################
function createZebraLabel(monthlySheet,newSheetName){
var parentFolder=DriveApp.getFolderById('1mUPLw1PSi-guH19uJPCPWmogkpdckLcW');
var createdoc = DocumentApp.create('Zebra Label').getId();
doc = DocumentApp.openById(createdoc);
var id = createdoc;
var docFile = DriveApp.getFileById(doc.getId());
var target = parentFolder;
var file1 = DriveApp.getFileById(id);
var mkfile1 = file1.makeCopy(newSheetName, target).getId();
doc = DocumentApp.openById(mkfile1);
docFile.setTrashed(true);
//325
var body = doc.getBody().setPageWidth(325).setPageHeight(180).setMarginTop(.02).setMarginBottom(.02);
// var body = doc.getBody().setPageWidth(144).setPageHeight(200).setMarginTop(.01).setMarginBottom(.01);
var sourceSpreadSheet = SpreadsheetApp.openById(monthlySheet);
var ss = sourceSpreadSheet.getSheetByName('Sheet1');
var startRow = 1; // First row of data to process
var numRows = 250; // Number of rows to process
var startColumn = 1; // A=1 B=2
var numColumns = 5; // Number of columns to process
var dataRange = ss.getRange(startRow, startColumn, numRows, numColumns);
var data = dataRange.getValues();
for (var i = 1; i < data.length; ++i) {
var row = data[i];
var actualrow=i;
var itemnum = row[0]; // A column
var desc = row[1]; // B column
var serial = row[2]; // D column
var bin = row[3]; // D column
var qty =row[4];
if (itemnum != ''){
var styleITEMNUM = {};
styleITEMNUM[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.RIGHT;
styleITEMNUM[DocumentApp.Attribute.VERTICAL_ALIGNMENT] =DocumentApp.VerticalAlignment.CENTER;
styleITEMNUM[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
styleITEMNUM[DocumentApp.Attribute.FONT_SIZE] = 14;
styleITEMNUM[DocumentApp.Attribute.BOLD] = true;
var styleDESC = {};
styleDESC[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.LEFT;
styleDESC[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
styleDESC[DocumentApp.Attribute.FONT_SIZE] = 10;
styleDESC[DocumentApp.Attribute.BOLD] = true;
var styleSERIAL = {};
styleSERIAL[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.RIGHT;
styleSERIAL[DocumentApp.Attribute.VERTICAL_ALIGNMENT] =DocumentApp.VerticalAlignment.CENTER;
styleSERIAL[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
styleSERIAL[DocumentApp.Attribute.FONT_SIZE] = 12;
styleSERIAL[DocumentApp.Attribute.BOLD] = true;
var nospace = {};
nospace[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.RIGHT;
nospace[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
nospace[DocumentApp.Attribute.FONT_SIZE] =-1;
nospace[DocumentApp.Attribute.BOLD] = true;
var text = body.editAsText();
var paraStyle = {};
paraStyle[DocumentApp.Attribute.PADDING_BOTTOM] = 0;
paraStyle[DocumentApp.Attribute.PADDING_TOP] = 0;
paraStyle[DocumentApp.Attribute.MARGIN_TOP] = 0;
paraStyle[DocumentApp.Attribute.SPACING_BEFORE] = 0;
paraStyle[DocumentApp.Attribute.SPACING_AFTER] = 0;
paraStyle[DocumentApp.Attribute.LINE_SPACING] = 0;
var itemqrcode = UrlFetchApp.fetch('https://chart.googleapis.com/chart?chs=80x80&cht=qr&chl='+itemnum);
var serialqrcode = UrlFetchApp.fetch('https://chart.googleapis.com/chart?chs=80x80&cht=qr&chl='+serial);
//#################### ITEM WITH SERIAL NUMBER ###################
if (itemnum != '' && serial != ''){ // SERIAL NUMBE
body.appendParagraph('').setAttributes(nospace);
var table = body.appendTable().setBorderWidth(0).setAttributes(paraStyle);
var tr = table.appendTableRow().setAttributes(paraStyle);
var td = tr.appendTableCell('').setWidth(80).setPaddingTop(0).setPaddingBottom(0).appendImage(itemqrcode.getBlob()).setAttributes(paraStyle);
var td = tr.appendTableCell('Item Number\n' +itemnum).setPaddingTop(0).setPaddingBottom(0).setAttributes(styleITEMNUM);
body.appendHorizontalRule().setAttributes(nospace);
body.appendParagraph(desc).setAttributes(styleDESC);
body.appendParagraph('').setAttributes(nospace).appendHorizontalRule().setAttributes(nospace);
body.appendParagraph('').setAttributes(nospace);
var table = body.appendTable().setBorderWidth(0).setAttributes(paraStyle);
var tr = table.appendTableRow().setAttributes(paraStyle);
var td = tr.appendTableCell('').setWidth(80).setPaddingTop(0).setPaddingBottom(0).appendImage(serialqrcode.getBlob()).setHeight(80);
var td = tr.appendTableCell('Serial Number\n ' +serial).setPaddingTop(0).setPaddingBottom(0).setAttributes(styleSERIAL);
}
else if (itemnum != '' && serial == ''){ // NO SERIAL NUMBER
var styleLocation = {};
styleLocation[DocumentApp.Attribute.HORIZONTAL_ALIGNMENT] = DocumentApp.HorizontalAlignment.LEFT;
styleLocation[DocumentApp.Attribute.FONT_FAMILY] = 'Calibri';
styleLocation[DocumentApp.Attribute.FONT_SIZE] =12;
styleLocation[DocumentApp.Attribute.BOLD] = true;
body.appendParagraph('').setAttributes(nospace);
var table = body.appendTable().setBorderWidth(0).setAttributes(paraStyle);
var tr = table.appendTableRow().setAttributes(paraStyle);
var td = tr.appendTableCell('').setWidth(80).setPaddingTop(0).setPaddingBottom(0).appendImage(itemqrcode.getBlob()).setAttributes(paraStyle);
var td=tr.appendTableCell('Item Number\n' +itemnum).setAttributes(styleITEMNUM);
body.appendParagraph('\n').setAttributes(nospace).appendHorizontalRule();
body.appendParagraph(desc).setAttributes(styleDESC);
body.appendParagraph('\n').setAttributes(nospace).appendHorizontalRule();
body.appendParagraph('').setAttributes(nospace);
var table = body.appendTable().setBorderWidth(0).setAttributes(paraStyle);
var tr = table.appendTableRow().setAttributes(paraStyle);
var td=tr.appendTableCell('Location:'+bin).setWidth(200).setPaddingTop(0).setPaddingBottom(0).setAttributes(styleLocation);
var td=tr.appendTableCell('Qty: ' +qty).setAttributes(styleLocation);
}
body.appendPageBreak();
}
}
var googledoc = doc.getUrl();
FinishedGoogleDoc(googledoc);
}

Enhancing Performance in Student Info App

I've built a simple Student Information platform using Google Sheets. It allows the user to query, update and create new student info on a user interface. Please refer to this sheet to see how it works.
The functions to Refresh/Update/Save are inside the Actions button on a menu bar. Everything seems to work well however when the number of records increases, say above 100 records, all the functions slow down and it gets extremely slow with 200+ records.
Appreciate if anyone could help to take a look at the scripts as I suspect they need to be optimized.
Many thanks in advance!
function UpdateDataIntoMaster() { //This script is used in the SAVE button in UPDATE sheet)
/*Get data from UPDATE Sheet*/
var ss = SpreadsheetApp.openById("11Djp9UmXbtWv7VitZFfo0X4Ctet3O8Amh4xADNKOZgY");
var sheet = ss.getSheetByName('UPDATE');
var range = sheet.getRange("D30:AE30"); //All data transposed into this line. MUST be updated if more fields are added into the Data sheet
var values = range.getValues();
var rangeForKey = sheet.getRange("D30") //Student Name is used as the
key identifier
var keyValue = rangeForKey.getValue();
/*Pass in keyValue(identifier = Student Name)
and all data in the function below in order
to update master data sheet*/
updDbase(keyValue,values);
function updDbase(keyValue,values) {
var ss = SpreadsheetApp.openById("11Djp9UmXbtWv7VitZFfo0X4Ctet3O8Amh4xADNKOZgY")
var sheet = ss.getSheetByName('Data');
var data = sheet.getDataRange().getValues();
var noOfRow = values.length
var noOfCol = values[0].length
for (var i=0; i < data.length; i++) { // going through all the rows in Data sheet
var keyData = ss.getSheetByName("Data").getRange(i+1,1).getValue(); //Get the Student Name from Data sheet
if (keyData == keyValue) {
// for (var j=0; j < data[i].length; j++) { // this is going through all the cell of a row
var row = Number(i)+1;
var sh = SpreadsheetApp.getUi();
var response = sh.alert("Update Information","Are you sure you want to update the student information?", sh.ButtonSet.YES_NO);
if (response == sh.Button.YES)
{
var sheets = ss.getSheetByName("Data").getRange(row,1,noOfRow,noOfCol).setValues(values);
}//If response == YES
}
}
}
}
function CreateNew() {
/*Get data from Inquiry Sheet*/
var ss = SpreadsheetApp.openById("11Djp9UmXbtWv7VitZFfo0X4Ctet3O8Amh4xADNKOZgY");
var sheetNew = ss.getSheetByName('Create New');
var range = sheetNew.getRange("D30:AZE30"); //All data transposed into
this line
var values = range.getValues();
var rangeForKey = sheetNew.getRange("E30") //Using Student ID as key identifier
var keyValue = rangeForKey.getValue();
var noOfRow = values.length
var noOfCol = values[0].length
var sheetData = ss.getSheetByName('Data');
var lastRow = sheetData.getLastRow();
var data = sheetData.getDataRange().getValues();
for (var i=0; i < data.length; i++) { // going through all the rows in Data sheet
var keyData = sheetData.getRange(i+1,2).getValue(); //Get the Student ID from Data sheet
if (keyData == keyValue) {
AlertBox();//If Student ID is found, to prompt Student ID already
exist
return;
} //If
} //For
/*Confirming with user whether to proceed to create new entry*/
var sh = SpreadsheetApp.getUi();
var response = sh.alert("Create New Record","Are you sure you want to
create new student information?", sh.ButtonSet.YES_NO);
if (response == sh.Button.YES){
if (keyValue == ""){
var response = sh.alert("Create New Record","Unable to proceed
because Student ID is empty", sh.ButtonSet.OK);
return;}
else {
//var response = sh.alert("Create New Record","Unable to
proceed because Student ID is empty", sh.ButtonSet.OK);
var sheets =
sheetData.getRange(lastRow+1,1,1,noOfCol).setValues(values)
}
}//If
}
function EditStudentInfo() {
var ss = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Inquiry");
//var ss = SpreadsheetApp.getActive();
var protections = ss.getProtections(SpreadsheetApp.ProtectionType.RANGE);
for (var i = 0; i < protections.length; i++) {
var protection = protections[i];
if (protection.canEdit()) {
protection.remove();
}
}
}
function EditContent() {
var s = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Update");
var rangeContentCol1 = s.getRange("E3:E23");
var CopyContentCol1 = s.getRange("E3:E23").getValues();
var rangeContentCol2 = s.getRange("I3:I23");
var CopyContentCol2 = s.getRange("I3:I23").getValues();
rangeContentCol1.clearContent();
rangeContentCol2.clearContent();
var PasteContentCol1 =
s.getRange("E3:E23").setValues(CopyContentCol1);
var PasteContentCol2 = s.getRange("I3:I23").setValues(CopyContentCol2);
}
A common performance mistake people with Apps Script is doing the .getRange().getValues() within their for loops. Performance-wise these get and set calls are quite expensive.
Lucky the fix for this is quite easy - get all the data at once first, then loops through it. You actually do this already, sort of. In your script you get the whole data range, but then only use a part of the data and instead do another getValues call. I've updated the two areas in your script that had getRange() calls in a for loop --> var keyData = data[i][0];
function UpdateDataIntoMaster() { //This script is used in the SAVE button in UPDATE sheet)
/*Get data from UPDATE Sheet*/
var ss = SpreadsheetApp.openById("11Djp9UmXbtWv7VitZFfo0X4Ctet3O8Amh4xADNKOZgY");
var sheet = ss.getSheetByName('UPDATE');
var range = sheet.getRange("D30:AE30"); //All data transposed into this line. MUST be updated if more fields are added into the Data sheet
var values = range.getValues();
var rangeForKey = sheet.getRange("D30") //Student Name is used as the
key identifier
var keyValue = rangeForKey.getValue();
/*Pass in keyValue(identifier = Student Name)
and all data in the function below in order
to update master data sheet*/
updDbase(keyValue,values);
function updDbase(keyValue,values) {
var ss = SpreadsheetApp.openById("11Djp9UmXbtWv7VitZFfo0X4Ctet3O8Amh4xADNKOZgY")
var sheet = ss.getSheetByName('Data');
var data = sheet.getDataRange().getValues();
var noOfRow = values.length
var noOfCol = values[0].length
for (var i=0; i < data.length; i++) { // going through all the rows in Data sheet
var keyData = data[i][0]; //Use the data that is already loaded.
if (keyData == keyValue) {
// for (var j=0; j < data[i].length; j++) { // this is going through all the cell of a row
var row = Number(i)+1;
var sh = SpreadsheetApp.getUi();
var response = sh.alert("Update Information","Are you sure you want to update the student information?", sh.ButtonSet.YES_NO);
if (response == sh.Button.YES)
{
var sheets = ss.getSheetByName("Data").getRange(row,1,noOfRow,noOfCol).setValues(values);
}//If response == YES
}
}
}
}
function CreateNew() {
/*Get data from Inquiry Sheet*/
var ss = SpreadsheetApp.openById("11Djp9UmXbtWv7VitZFfo0X4Ctet3O8Amh4xADNKOZgY");
var sheetNew = ss.getSheetByName('Create New');
var range = sheetNew.getRange("D30:AZE30"); //All data transposed into
this line
var values = range.getValues();
var rangeForKey = sheetNew.getRange("E30") //Using Student ID as key identifier
var keyValue = rangeForKey.getValue();
var noOfRow = values.length
var noOfCol = values[0].length
var sheetData = ss.getSheetByName('Data');
var lastRow = sheetData.getLastRow();
var data = sheetData.getDataRange().getValues();
for (var i=0; i < data.length; i++) { // going through all the rows in Data sheet
var keyData = data[i][0]; //Use the data that is already loaded.
if (keyData == keyValue) {
AlertBox();//If Student ID is found, to prompt Student ID already
exist
return;
} //If
} //For
/*Confirming with user whether to proceed to create new entry*/
var sh = SpreadsheetApp.getUi();
var response = sh.alert("Create New Record","Are you sure you want to
create new student information?", sh.ButtonSet.YES_NO);
if (response == sh.Button.YES){
if (keyValue == ""){
var response = sh.alert("Create New Record","Unable to proceed
because Student ID is empty", sh.ButtonSet.OK);
return;}
else {
//var response = sh.alert("Create New Record","Unable to
proceed because Student ID is empty", sh.ButtonSet.OK);
var sheets =
sheetData.getRange(lastRow+1,1,1,noOfCol).setValues(values)
}
}//If
}
function EditStudentInfo() {
var ss = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Inquiry");
//var ss = SpreadsheetApp.getActive();
var protections = ss.getProtections(SpreadsheetApp.ProtectionType.RANGE);
for (var i = 0; i < protections.length; i++) {
var protection = protections[i];
if (protection.canEdit()) {
protection.remove();
}
}
}
function EditContent() {
var s = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Update");
var rangeContentCol1 = s.getRange("E3:E23");
var CopyContentCol1 = s.getRange("E3:E23").getValues();
var rangeContentCol2 = s.getRange("I3:I23");
var CopyContentCol2 = s.getRange("I3:I23").getValues();
rangeContentCol1.clearContent();
rangeContentCol2.clearContent();
var PasteContentCol1 =
s.getRange("E3:E23").setValues(CopyContentCol1);
var PasteContentCol2 = s.getRange("I3:I23").setValues(CopyContentCol2);
}
Give this a test and let me know if it helps!

I want to Group questions and answers LINQ and have them display properly

I'm trying to group properly to have my cell distribute eveningly. The printout is coming very odd and uneven.
is it the table i'm creating or group or both? I think the group is correct. My results are as shown in the image below.
Gold is the heading,
Green are the questions,
Red are the answers
Mt table is is below
var Sections = new OncologySection().SelectSections(projectID.ToString());
int iSection = 0;
int igroups = 0;
int ianswer = 0;
tb.CssClass = "";
tb.BorderWidth = 1;
tb.Width = new Unit("780px");
tb.Attributes.Add("runat", "server");
foreach (OncologySection section in Sections)
{
TableRow row1 = new TableRow();
iSection++;
// var getDistinctQuestion = getVoterAnswerstoList.Select(s => s.QuestionText ,s.Id).Distinct().ToList();
var getVoterAnswerstoList = new OncologyGeneratePDFDAL().DataforPDFCreation(Convert.ToInt32(projectID), Convert.ToInt32(voterid), Convert.ToInt32(caseId), Convert.ToInt32(voteSurveyId), Convert.ToInt32(section.SectionID)).OrderBy(os => os.SortOrder);
//var groupedCustomerList = getVoterAnswerstoList
// .GroupBy(u => u.QuestionText, u.QuestionText)
// .Select(grp => grp.ToList())
// .ToList();
var groupedCustomerList = getVoterAnswerstoList.GroupBy(x => new { x.QuestionText, x.DynamicValue }).ToList();
TableCell cell1 = new TableCell();
cell1.BorderWidth = 1;
cell1.Text = section.SectionName;
cell1.BorderColor = System.Drawing.Color.Goldenrod;
cell1.ColumnSpan = groupedCustomerList.Count();
row1.Cells.Add(cell1);
tb.Rows.Add(row1);
TableRow row2 = new TableRow();
foreach (var groups in groupedCustomerList)
{
igroups++;
TableCell cell2 = new TableCell();
var q = (from s in groups select s.QuestionText).FirstOrDefault();
cell2.BorderWidth = 1;
cell2.Text = q;
cell2.BorderColor = System.Drawing.Color.Green;
cell2.ColumnSpan = groupedCustomerList.Count();
row2.Cells.Add(cell2);
if (igroups == groupedCustomerList.Count())
{
tb.Rows.Add(row2);
}
else
{
row2.Cells.Add(cell2);
}
TableRow row3 = new TableRow();
foreach (var answers in groups)
{
ianswer++;
TableCell cell3 = new TableCell();
cell3.BorderWidth = 1;
cell3.BorderColor = System.Drawing.Color.DarkRed;
if (answers.DataTypeId == 7)
{
cell3.Text = answers.DynamicValue.ToString();
}
else if ((answers.DataTypeId == 5) || (answers.DataTypeId == 6) || (answers.DataTypeId == 8))
{
if (answers.VotingValue != 0)
{
cell3.Text = answers.VotingValue.ToString();
}
else
{
cell3.Text = " ";
}
}
else
{
cell3.Text = " ";
}
row3.Cells.Add(cell3);
tb.Rows.Add(row3);
}
}
}
}

Bind data from SQLite Database to Entry Xamarin Forms

I want to get the data of PresAddress column in SQLite Database. I want to get the "PresAddress" column data and bind that data to my entry field. PresAddress is inside tblContacts. How can I get that?
Here is my code:
private void rcodePicker_SelectedIndexChanged(object sender, EventArgs e)
{
var pickedRetailerCode = rcodePicker.Items[rcodePicker.SelectedIndex];
var db = DependencyService.Get<ISQLiteDB>();
var conn = db.GetConnection();
var getUser = conn.QueryAsync<ContactsTable>("SELECT * FROM tblContacts WHERE ContactID=?", pickedRetailerCode);
var resultCount = getUser.Result.Count;
if (resultCount < 1)
{
//MessagingCenter.Send(this, "Http", Retailer);
}
else
{
var result = getUser.Result;
entStreet.Text = ;
}
}
Use this:
for (int i = 0; i < resultCount; i++)
{
var result = getUser.Result[i];
entStreet.Text = result.PresAddress;
entBarangay.Text = result.PresBarangay;
entCity.Text = result.PresTown;
entProvince.Text = result.PresProvince;
entDistributor.Text = result.PresDistrict;
}

Resources