I installed rbenv according to the github directions. I am running OSX but I have tried this on a Ubuntu 12.04 VM and got the same results. The following is what i get in my terminal when I try to change ruby versions:
rbenv versions
* 1.9.3-p0 (set by /Users/user/.rbenv/version)
1.9.3-p125
rbenv global
1.9.3-p0
rbenv rehash
ruby -v
ruby 1.8.7 (2011-12-28 patchlevel 357) [universal-darwin11.0]
which ruby
/usr/bin/ruby
Anyone have any ideas as to why rbenv isn't switching the ruby version like it thinks it is? Also there is no .rbenv file in the local directory that would be causing the ruby version to default to 1.8.7
rbenv local
rbenv: no local version configured for this directory
Check that PATH contains $HOME/.rbenv/shims and $HOME/.rbenv/bin
$ env | grep PATH
Also check that you have the following in your ~/.bash_profile if using bash or ~/.zshenv if using zsh
export PATH="$HOME/.rbenv/bin:$PATH"
eval "$(rbenv init -)"
NOTE:
Make sure it's the last setting in your ~/.bash_profile . I ran into an issue where I installed a program that updated my .bash_profile and reset PATH.
Finally, make sure your $HOME folder doesn't have a .ruby-version file that you may have created by accident if you were to have done $ rbenv local <ruby-version> in your $HOME folder. Doing $ rbenv global <ruby-version> modifies the $HOME/.rbenv/version file, and the existence of a .ruby-version file in the $HOME folder would override the version set by $HOME/.rbenv/version.
From the docs:
Choosing the Ruby Version
When you execute a shim, rbenv determines which Ruby version to use by reading it from the following sources, in this order:
The RBENV_VERSION environment variable, if specified. You can use the rbenv shell command to set this environment variable in your current shell session.
The first .ruby-version file found by searching the directory of the script you are executing and each of its parent directories until reaching the root of your filesystem.
The first .ruby-version file found by searching the current working directory and each of its parent directories until reaching the root of your filesystem. You can modify the .ruby-version file in the current working directory with the rbenv local command.
The global ~/.rbenv/version file. You can modify this file using the rbenv global command. If the global version file is not present, rbenv assumes you want to use the "system" Ruby—i.e. whatever version would be run if rbenv weren't in your path.
I fixed this by adding the following to my ~/.bash_profile:
#PATH for rbenv
export PATH="$HOME/.rbenv/shims:$PATH"
This is what is documented at https://github.com/sstephenson/rbenv.
From what I can tell there isn't ~/.rbenv/bin directory, which was mentioned in the post by #rodowi.
This may be an old question, but Google led me here and, for posterity sake, thought I'd share.
My problem persisted after many of the recommended solutions above. Like the OP, I installed rbenv and then a ruby version, but my laptop defaulted to system. What I had overlooked was that when I ran:
[~/.rbenv] $ rbenv versions
* system (set by /Users/alphadogg/.rbenv/version)
2.0.0-p247
IOW, it was still defaulting to system. A quick
[~/.rbenv] $ rbenv local 2.0.0-p247
switched it to the new version.
First step is to find out which ruby is being called:
$ which ruby
Your system says:
/usr/bin/ruby
This is NOT the shim used by rbenv, which (on MacOS) should look like:
/Users/<username>/.rbenv/shims/ruby
The shim is actually a script that acts like a redirect to the version of ruby you set.
I recommend that for trouble shooting you unset the project specific "local" version, and the shell specific "shell" version and just test using the "global" version setting which is determined in a plain text file in ~/.rbenv/version which will just be the version number "1.9.3" in your case.
$ rbenv global 1.9.3
$ rbenv local --unset
$ rbenv shell --unset
You can do ls -laG in the root of your project folder (not the home folder) to make sure there is no longer a ".ruby-version" file there.
You can use rbenv versions to identify which version rbenv is set to use (and the location and name of the file that is setting that):
$ rbenv versions
NONE OF THAT MATTERS until you set the path correctly.
Use this to make sure your *MacOS will obey you:
$ rbenv init -
Followed by:
$ which ruby
To make sure it looks like:
/Users/<username>/.rbenv/shims/ruby
Then run this to add the line to your profile so it runs each time you open a new terminal window:
$ echo 'eval "$(rbenv init -)"' >> ~/.bash_profile
There are other ways to modify the path, feel free to substitute any of them instead of running the rbenv init.
NOTE: reinstall Rails with:
$ gem install rails
If you were trying to run Ruby on Rails, then you need to have this all working first, then install the rails gem again. A previous install of Rails will use a hard coded path to the wrong ruby and several other things will be in the wrong place, so just install the gem again.
P. S. If your MacOS won't obey you (*mentioned above) then you may have to find another way to modify your path, but that's unlikely to be a problem because "Macs just work" ;)
I had this issue when setting up Ruby using rbenv on MacBook Pro Catalina OS and MacBook Pro Big Sur.
Here's how I fixed:
First run the command below to initialize rbenv:
rbenv init
This will give you some instruction on what to do. Basically you will have to open the ~/.zshrc file and add this to the file eval "$(rbenv init -)". You can accomplish this by running the command below:
echo 'eval "$(rbenv init -)"' >> ~/.zshrc
Next, run the command below to set your Ruby version:
rbenv local <your-desired-ruby-version>
In my case, my desired Ruby version was 3.0.1, so it was:
rbenv local 3.0.1
When you are done, quit your terminal using Command + Q, and then open a new terminal, this time when you run the command:
ruby -v
rbenv versions
You will see that your desired Ruby version has already been set up for you.
In my case changing the ~/.zshenv did not work. I had to make the changes inside ~/.zshrc.
I just added:
# Include rbenv for ZSH
export PATH="$HOME/.rbenv/bin:$PATH"
eval "$(rbenv init -)"
at the top of ~/.zshrc, restarted the shell and logged out.
Check if it worked:
➜ ~ rbenv install 2.4.0
➜ ~ rbenv global 2.4.0
➜ ~ rbenv global
2.4.0
➜ ~ ruby -v
ruby 2.4.0p0 (2016-12-24 revision 57164) [x86_64-darwin16]
I just found this same problem. What I did was uninstall rbenv (via homebrew) and reinstall it. I also added
if which rbenv > /dev/null; then eval "$(rbenv init -)"; fi
into ~/.bash_profile when I reinstalled rbenv. Works perfectly now.
Run this command
Add rbenv to bash so that it loads every time you open a terminal
echo 'if which rbenv > /dev/null; then eval "$(rbenv init -)"; fi' >> ~/.bash_profile
source ~/.bash_profile
this will solve your problem Reference
If you are using bash, go to
~/.bash_profile
and add the following line (if it's not already there)
if which rbenv > /dev/null; then eval "$(rbenv init -)"; fi
If you are using Zsh, go to
~/.zshrc
and add the same line of code, at the end of the .zshrc file.
Then simply restart your terminal and it should be fine now.
rbenv help shell
"Sets a shell-specific Ruby version by setting the 'RBENV_VERSION' environment variable in your shell. This version overrides localapplication-specific versions and the global version. should be a string matching a Ruby version known to rbenv.The special version string 'system' will use your default system Ruby. Run rbenv versions' for a list of available Ruby versions."
Provided rbenv was installed correctly, ruby -v will correspond to
rbenv shell 1.9.3-p125
I had the same problem, but caused by Homebrew:
[~]$ rbenv version
2.3.0 (set by /Users/user/.rbenv/version)
[~]$ ruby -v
ruby 2.3.3p222 (2016-11-21 revision 56859) [x86_64-darwin16]
[~]$ which ruby
/usr/local/bin/ruby
Somehow I had installed Ruby via Homebrew too, and the Homebrew path was ahead of the rbenv path in my $PATH. Running brew uninstall ruby fixed it for me.
run:
rbenv init
After I ran that, when i set my local rbenv version:
rbenv local 2.4.0
then my ruby -v and my rbenv local versions coincided.
Note: You might also want to exit the directory you're in and then go back into it, i've noticed that was necessary for me in order to get things to work.
for fish shell user
set --universal fish_user_paths $fish_user_paths ~/.rbenv/shims/
As for me the easiest way to use rbenv along with zsh is adding rbenv to plugins section in .zshrc config. In my case it looks similar to:
# Which plugins would you like to load? (plugins can be found in ~/.oh-my-zsh/plugins/*)
# Custom plugins may be added to ~/.oh-my-zsh/custom/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(git bower rails ruby rbenv gulp npm node nvm sublime)
After that there're no problems when installing, switching, using ruby versions with help of rbenv.
Mind to restart your terminal session after made changes.
The accepted answer suggests to add the following:
export PATH="$HOME/.rbenv/bin:$PATH"
This will not work on Mac OSX, which the OP references. In fact, if you install rbenv via brew install rbenv, which is really the only installation method in Mac OSX, since curl -fsSL https://github.com/rbenv/rbenv-installer/raw/master/bin/rbenv-installer | bash will FAIL in OSX, then the rbenv executable will be installed in:
$ which rbenv
/usr/local/bin/rbenv
However, even in OSX, the rbenv root will remain in the $HOME directory:
~ viggy$ rbenv root
/Users/viggy/.rbenv
What does this mean? It means when you install rubies, they will install in the given home directory under .rbenv:
$ rbenv install 2.6.0
$ ls ~/.rbenv/versions
2.6.0
Now the brew installation did some work that you would have to perform manually in Linux. For example, in Linux, you would have to install ruby-build manually as a plugin:
$ mkdir -p "$(rvbenv root)/plugins"
$ git clone https://github.com/rbenv/ruby-build.git "(rbenv root)"/plugins/ruby-build
This is already done with the homebrew installation. There is one important step that must be done in the homebrew installation, as in the Linux installation. You must add the rbenv shims to your path. In order to do that, when your shell starts, you have to evaluate the following command (which will in turn add the rbenv shims to the beginning of your $PATH):
$ vim ~/.bash_profile
eval "$(rbenv init -)"
$ source ~/.bash_profile
Now when you run echo $PATH, you will see the rbenv shims:
$ echo $PATH
/Users/viggy/.rbenv/shims:
Now check your ruby version and it will reflect the rbenv ruby installed:
ruby -v
ruby 2.6.0p0
When I had these symptoms, the problem turned out to be that install had failed halfway through for the new Ruby version I was trying to switch to, without me noticing. The fix was to delete & reinstall it.
(This meant that even though ruby 1.9.3 showed up in the rbenv list of available versions, it didn't have an executable on the path where rbenv assumed it would. Since rbenv tries to change your ruby version just by prepending a location to your path, if there's nothing actually in the location it prepends, your OS will happily continue searching your default path and find your system version, in my case like the question's 1.8.7.)
Make sure the last line of your .bash_profile is:
export PATH="$HOME/.rbenv/bin:$PATH"
eval "$(rbenv init -)"
I came to the same problem.
Fixed this by run the rbenv global command with sudo.
I think it was something permission problem.
update:
I finally found the solution.
There was one same file "version" on my mac, which is under /usr/local/Cellar/rbenv/0.3.0/.
I think it was created by mistake occasionally. you should remove it.
Adding the following to .bashrc works for me -
export PATH="$HOME/.rbenv/shims:$PATH"
This happened to me right after I reinstalled rbenv. Apparently I had a .ruby-version file in my home directory, specifying a version that no longer existed. Once I deleted the file, everything worked.
Update 2023 (Macbook Ventura+)
Even if you have rbenv installed, your computer could still serve the default ruby version. To fix this, just run the following:
rbenv init
This might give an output like this:
# Load rbenv automatically by appending
# the following to ~/.zshrc:
eval "$(rbenv init - zsh)"
Just open your .zshrc file:
sudo nano ~/.zshrc
(Or you can also open this file with any other text editor)
Add this line:
eval "$(rbenv init - zsh)"
Save the file (if used sudo nano, you can do so like this:)
CTRL + X then Y then Enter (For Mac)
Now, refresh your .zshrc profile like this:
source ~/.zshrc
Now type ruby --version, this must give you the ruby version that was provided by rbenv.
There a lot of of misleading answers that work. I thought it was worth mentioning the steps from the rbenv README.
$ brew install rbenv
$ rbenv init and follow the instructions it gives you. This is what I got:
~ $ rbenv init
# Load rbenv automatically by appending
# the following to ~/.bash_profile:
eval "$(rbenv init -)"
I updated my ~/.bash_profile...
Close terminal and open it again
Verify it's working correctly by running:
$ curl -fsSL https://github.com/rbenv/rbenv-installer/raw/master/bin/rbenv-doctor | bash
Now just install the version you want by doing: rbenv install <version>
Linux / Ubuntu Users
Step 1:
$ rbenv versions
system
2.6.0
* 2.7.0 (set by /home/User/Documents/sample-app/.ruby-version) #Yours will be different
2.7.2
Step 2:
$ nano /home/User/Documents/sample-app/.ruby-version
Step 3:
$ ruby -v
ruby 2.7.2p137 (2020-10-01 revision 5445e04352) [x86_64-linux]
I tried every solution, but nothing worked for me. Even I was including the path in the .zshrc file.
In my case, I'm using MacBook Pro M2 with macOS Ventura 13.2. And I'm using React Native 0.71.2, which needed Ruby 2.7.6 version.
I simply placed the following code in the .zprofile instead of .zshrc, and it worked:
export PATH="$HOME/.rbenv/bin:$PATH"
eval "$(rbenv init - zsh)"
You could try using chruby? chruby does not rely on shims, instead it only modifies PATH, GEM_HOME, GEM_PATH.
I forgot to delete rvm before installing rbenv. I deleted rvm and re-installed rbenv, but system still wasn't using the version of Ruby being designated as global by rbenv. I tried shutting Terminal, but it only worked once I restarted the whole machine.
All the other answers here give good advice for various situations, but there is an easier way.
The rbenv docs point us to the rbenv-doctor diagnostic tool that will quickly verify all these potential pitfalls on your system:
curl -fsSL https://github.com/rbenv/rbenv-installer/raw/master/bin/rbenv-doctor | bash
When all is well, you'll see this:
$ curl -fsSL https://github.com/rbenv/rbenv-installer/raw/master/bin/rbenv-doctor | bash <aws:hd-pmp-developer>
Checking for `rbenv' in PATH: /usr/local/bin/rbenv
Checking for rbenv shims in PATH: OK
Checking `rbenv install' support: /usr/local/bin/rbenv-install (ruby-build 20201005)
Counting installed Ruby versions: 1 versions
Checking RubyGems settings: OK
Auditing installed plugins: OK
Now, if we break one of those expectations (e.g. remove rbenv-install), the tool will point us directly to the problem, with a link to how to fix it:
$ mv /usr/local/bin/rbenv-install rbenv-install-GONE
$ curl -fsSL https://github.com/rbenv/rbenv-installer/raw/master/bin/rbenv-doctor | bash
Checking for `rbenv' in PATH: /usr/local/bin/rbenv
Checking for rbenv shims in PATH: OK
===> Checking `rbenv install' support: not found <===
Unless you plan to add Ruby versions manually, you should install ruby-build.
Please refer to https://github.com/rbenv/ruby-build#installation
Counting installed Ruby versions: 1 versions
Checking RubyGems settings: OK
Auditing installed plugins: OK
Strangely, rbenv version did not set the .rbenv file.
Check with: ls -ltra --> to see that a rbenv was written.
Adding eval "$(rbenv init -)" to the .bash_profile on my mac resolved this issue.
rbenv local
ruby -v gave the set
Apparently, it worked for me when I used the Rosetta terminal
You can try doing the same thing using Rosetta terminal
by going into
Finder > Utilities > Terminal > Get Info