I use Visual Studio Community 2019 with C++ (no .Net). Yesterday I updated to version 16.7.1. Ever since then, Visual Studio hangs on exit at the step "Unloading Projects". No projects are unloaded, and the progress bar never starts moving. The program simply hangs and is unresponsive. The only way out is to kill the process.
It also hangs whenever I try to change the Configuration target for the solution. Both issues occur on any of my solutions that I open. I have tried using Visual Studio Installer to repair the install, but it makes no difference. The installer does report one issue: Couldn't repair Microsoft.AspNetCore.TargetingPack.3.1.3.1.3 But this hardly seems like it matters to my Win32 projects.
This problem definitely started as soon as I updated to 16.7.1. I don't recall the previous version I had, but I had just updated a few days before so it was probably 16.7. I am posting to see if others have this problem and if anyone has found a solution (other than falling back a version). I will limp along with it for now.
Same happened to me. Just use visual studio 2017. Only thing that fixed it for me.
Related
I have a problem with visual studio 2022. I am creating a WPF app in vs 2022 version 17.2.4 using .NET 7 Preview. When I build the solution or press Start Debugging or Start Without Debugging, Visual studio won't update the compiled code(Won't replace binary files with the latest ones) and the behavior of the program won't change to correspond to the code. The problem does not persist when I press Build->Clean Solution and then Build->Build Solution. It does the same whether I build the solution with the debug or release configuration. I tried it with other solutions as well and the problem will not go away. So I know how to deal with this, but it seems weird and annoying nonetheless. It's the first time that I encounter something like this.
P.S.(Yes the solution compiles with no errors or warnings)
When I start VisualStudio it frezzes on the start screen. But when I start it a second time while the first instance is open the second instance works fine.
It's not that important but what could cause that problem?
Not sure. Sometimes some Visual Studio extensions are locking up Visual Studio.
I think by default Visual Studio tries to update these extensions
that have been installed automatically.
Recently I was trying to run Visual Studio (at Home) and it would freeze if I tried to open a specific project. But I was busy, so I didn't pursue it further and did other things. Then a week or a few days later I tried to run Visual Studio (at home), and it locked up when I ran it. I tried really hard to fix it.
There is a way I don't like where you can delete all or most of the
extensions from the place Visual Studio installs them, but this is
messy, and it is easy to get rid of something you need, and may hard
to get it back where it works correctly again. So I now recommend against this since there is a better solution now, below!
I searched to find a solution, and someone on a Microsoft board I think said to run from a command prompt as Administrator: DEVENV /RESETSETTINGS, I tried that and it didn't work for me. Then I thought, run DEVENV /? to see what I can see, and I saw :
DEVENV /SAFEMODE
So I tried that and it worked! Note: it was still being run from the Visual Studio Developer Prompt as an Administrator.
Visual Studio loaded up correctly, and I was able to look at the
installed extensions.
Eventually I noticed that they all or a lot of them were disabled (probably because of this SAFEMODE parameter), and I noticed that it the most recently updated were at the top of the list. I noticed that a lot of them had been automatically updated by Visual Studio and started Uninstalling a bunch of the more recent ones, and reverted at least one of them, then later uninstalled it. Eventually, after about 6 to 10 uninstalls, I got it to where Visual Studio would load normally, without the /SAFEMODE parameter! Cool!
So I turned off the automatic updates, so this will never happen automatically again. If I load a new extension or update and existing one manually, I should always exit Visual Studio and reload it after not doing too many updates or installing too many extensions to see if these extensions allow Visual Studio to load.
Sometimes an extension will not freeze Visual Studio, but will have errors. The ones that are the big problem are the ones which prevent Visual Studio from loading all the way and freezing it up. But with the above solution, you can eventually, cleanly, uninstall all the latest updates or new installed extensions until you finally get Visual Studio to load normally!
This workaround should be more widely known, so I am putting my solution to it here. Hopefully what I found should help someone else who is in a hurry, without having a lot of time to burn trying to get Visual Studio running again without freezing!
I use Visual Studio Community 2017, and I got this same issue on startup until I stumbled on this solution that deals with some corruption in the .suo file. Before I open Visual Studio for the day, I first delete the .suo file in my project folder, and it starts up just fine.
It's in a folder called .vs next to the .sln file. You may have to go to folder options View and check "Hidden Items" in order to find this folder. Dig down in that folder and you'll find the .suo file. Delete it. When you startup the project in Visual Studio, it will automatically create a new .suo file. So you'll have to do this every time you reopen.
I recently installed Visual Studio 2013 on my dev machine and was missing Code Contracts support afterwards (had it installed previously), so I reinstalled Code Contracts. Immediately thereafter, Visual Studio refused to start up with the error message "A problem occurred when loading the Microsoft Visual Menu....", as described here.
I tried to do as advised in the message in every possible way I can think of, but none of them worked.
So I reinstalled Visual Studio 2013 and got the following behaviour:
VS does launch up correctly for exactly one single time, right after the reinstall. Any subsequent lauch fails with the error message described above. I verified this by reinstalling VS a second time and got the same result.
I then uninstalled Code Contracts, reinstalled VS again and still got the same. After completely wiping my system of .net framework 4.5.1 and reinstalling VS again, I was finally rid of this message.
So I braced myself, launched up the Code Contracts installer and guess it? Same procedure as every year: One single correct VS launch, all subsequents with error, again!
I did the same setup on two other machines, neither of which had any problems.
What can I try next (short of wiping my whole machine)?
My Visual Studio began crashing at start-up. In my search for finding a remedy, I found these two suggestions, but neither worked for me:
Launching Visual Studio while running in safe mode, and
Running repair on Visual Studio.
However, I found that if I logged into a different Windows account, Visual Studio was able to run from that account without crashing.
Here is an error code that that I observed in the crash report:
LCID: 1033
Can anyone provide a solution for returning my Visual Studio to working order?
For me it turned out to be the plugin that GitExtensions installed into Visual Studio 2013.
-- UPDATE: try this before uninstalling GitExtensions
#Enceradeira proposed in the comments to uncheck the Show current branch in Visual Studio option. In GitExtensions, you get there via Tools -> Settings -> Appearance:
-- END OF UPDATE
After uninstalling GitExtensions and reinstalling it with all VS plugin unselected my VS runs smoothly again.
I even put together a blog post about this issue because it bugged me so much.
Since you're able to run with another user login, something may be wrong with your local settings, you can try to reset them: devenv /resetsettings in Start menu -> Run.
Warning: this will restore visual studio to default settings.
In my case VS used to crash on a single solution. I resolved the problem by deleting the respective solutions's user file: SolutionName.suo
My colleague recently experienced a problem with Visual Studio 2013 crashing on start-up. Unfortunately, we found that the approach recommended in the answer by #Arun M did not solve the problem:
devenv.exe /ResetSettings
...however, using a different command line argument did:
devenv.exe /ResetUserData
An easy way to run devenv.exe is via the Visual Studio command prompt; on Windows 10, it can be found here:
Start Button => All Apps => Visual Studio 2013 => Visual Studio Tools =>
VS2013 x86 Native Tools Command Prompt
For more about these command line arguments for devenv.exe, see this answer to this related question: How do I truly reset every setting in Visual Studio 2012?. ⚠ In particular, please note the cautionary statement in that answer about the /ResetUserData command line argument!
Try to run VS as administrator. That's necessary in my case.
If coincident to these Visual Studio crashes you are getting "Heap corruption" (Exception code: 0xc0000005) errors in your Windows Application log (Faulting module name: WindowsCodecs.dll), here is something worth checking into: A faulty WIC component within Expression Blend can cause ALL versions of Visual Studio to crash upon launch, as well as cause Internet Explorer to crash upon visiting many, if not most sites. Even though Microsoft distributes this component, they call it a "non-Microsoft component". As such, a Visual Studio reinstall won't fix this,, an OS reinstall over existing Windows installation won't fix this, and a system file integrity check won't detect it.
If my case, the misbehaving codec was "C:\Program Files (x86)\Microsoft Expression\Common\Imaging\4.0.360.0\PSDCodec.dll", and simply unregistering this component got my Visual Studio working again from consistent startup launch crashes.
I post this in hopes this solution to one source of Visual Studio crashing might save others from the $500 Microsoft support incident fee and week of downtime this caused me.
I just changed the windows language in the bottom right to "EN", then started as admin. And it worked, interesting..
I had the very strange phenomenon that both Visual Studio 2010 and 2013 on a Windows 7 machine crashed when run in a remote desktop session, started from a Windows 10 pc. Debugging the crash showed a CultureNotFound exception. It was caused by regional settings on the Windows 10 pc, which could not be translated in something understood by Windows 7. I had language English(Belgium) with an Azerty keyboard. I added and selected English(UK) with an Azerty keyboard and the crashes disappeared. No other programs suffered from this.
For me it was being caused by Web Essentials and I was able to resolve by disabling it, restarting VS, enabling it back , restart again. Works now.
I had a crash on startup (or soon after startup, before opening any solution) occurring in git2-msvstfs.dll, caused by placing a 3GB temp file into a directory within my solution. Deleting the file fixed it.
Once I accidentally pressed a random key combination (maybe something like ctrl+', but I didn’t realize I was holding ctrl down so I forgot what keys I hit by the time I realized something bad had happened) that resulted in VS Professional 2017 15.3.5 crashing within half a minute. After relaunching, I found that VS would be interactive for a few seconds before it would crash within half a minute. It was really too fast for me to try to figure out what I had accidentally activated or for me to disable it before VS would crash. Also, it would even crash if I didn’t open any solution, so I figured it was not something that deleting a .vs (per project/solution Solution Explorer/open files state) folder would fix.
To fix, I followed Arun M’s comment and renamed my %LOCALAPPDATA%\Microsoft\VisualStudio\15.0_3f4d04be folder. You will need to adjust the path for the edition/version of VS that is crashing. On my machine, I think 15.0_3f4d04be is Professional and 15.0_0fed6c59 is VS Community Edition. You’ll probably have to guess based on the folder’s modification timestamp which is probably going to reflect the date you last used that edition of VS.
After renaming the versioned dotfolder, VS launched without crashing. It started with default settings but automatically restored some of my settings through the cloud sync stuff after a minute of running and it even remembered my account information so I didn’t need to sign in.
I did not need to rename my %LOCALAPPDATA%\Microsoft\VSCommon folder (which Arun M had also suggested).
I had a similar problem, both VS2015 and VS2013 would crash at startup. Tracked it down to an application I installed which put .net 4.7.2 on the system. Once i removed that app, removed .net, and reinstalled .net 4.6, Visual Studio started working again.
What's the reason for error message "The snapshot is out of date and cannot be used anymore because type tree has been updated, A new snapshow needs to be acquired"?
This error appeared right after I launched VS2010 and added username/pwd to connect to TFS repository.
I am using VS 2010 professional edition.
It happened to me with VS2012 as well after loading the project without source control binding, a local simple WinForms project. All I needed to do was Clean & Rebuild. After that the problem was solved.
This is a bug in Visual Studio. According to http://connect.microsoft.com/VisualStudio/feedback/details/742959/the-snapshot-is-out-of-date "We've taken a closer look at this problem and it isn't one that we'll be able to solve in the next release of Visual Studio."
They recommend waiting around until the background language parser service is done (or, in other words, don't try to be too productive there partner.) My experience is that closing all documents, cleaning the solution, rebuilding it and then closing and re-opening with a pause after does remove the error.
Until you do something silly, like edit code. Then all bets are off again as to when it reoccurs.
I had a similar issue with VS2012 and after rebuilding the solution twice, I still saw the same error message.
Following an advice from a post from this site, I closed the Designer tab, reopened it from the Solution Explorer, and the problem was resolved.
I got this error too, but after I unload project and reload project, the problem was resolved.
Simply restarting Visual Studio 2012 was a workaround for me, but it kept happening about every hour and having to restart visual studio that often was very annoying.
I also found this post which suggests that the Productivity Power Tools are the problem and to simply turn off the Automatic Brace Completion in Tools->Options->Productivity Power Tools. Since making this change I haven't seen the error message again :)
I'll note though that I am using Visual Studio 2012 and the OP is using Visual Studio 2010, but the Productivity Power Tools are available for VS 2010 too, so this may still fix the problem in VS 2010.
The same issue persists in VS2013, but no amount of Clean/Rebuild or restarting VS will help. The only way I can do a successful publish, is to disable the AutoT4MVC extension.
I got this error too. I closed Visual Studio 2012 and opened it again and the error was gone.
I got this error when I had conflicting class names / namespaces. I was referencing a UserControl from a different DLL in my XAML file which had the same name as my XAML file (class name). Maybe this helps.
I used Visual Studio 2012, and just faced this error on my Windows 8. It seems like Turning off the VM and restarting Visual Studio fixed the issue.
I just got this with VS2010.
I had a form with a user control (UCa) with a user control (UCa) from a different project on it. Made a change to the UCb then flicked to the designer for the form and boom! Snapshot error.
Resolved by a full clean and then rebuilding just the UCb project before building the rest of the project.
I'm using Visual Studio 2012, and I got this error when starting Visual Studio, letting TFS connect to the server, and THEN opening my solution. The fix was simply closing VS and launching the solution directly.
I'll throw my two cents in here as well.
I've tried every combination of Clean, Rebuild, Restart, etc. What I've found is that restarting Visual Studio usually makes the problem go away for at least one Publish. Here's the weird part, though. You can also fix the problem by doing absolutely nothing. If you just let Visual Studio sit for about a minute or two, and then publish, it will usually work just fine. There's some background voodoo going on here, and waiting for it to finish seems to do the trick.
I have a solution with two parts that need published. One is a WCF service application, and the other is the ASP.NET MVC5 website itself. Anytime I publish the services, and then try to publish the site I'll see this error. I can publish the services, restart VS, and then publish the site, OR I can publish the services, go get a drink, and then publish the site. As long as I give VS a chance to "settle" between any kind of rebuild and the publishing of the site, everything seems to work as expected.
Take a walk, come back, problem solved. OR if you don't have the time. Clean, Rebuild, Restart, Publish (lather, rinse, repeat).