I have followed the instructions in the documentation: https://docs.datastax.com/en/dsbulk/doc/dsbulk/install/dsbulkInstall.html
However, after doing the following:
curl -OL https://downloads.datastax.com/dsbulk/dsbulk-1.6.0.tar.gz
and
tar -xzvf dsbulk-1.6.0.tar.gz
inside an application directory, followed by the command
dsbulk --version
I get the output
Unable to find java 8 (or later) executable. Check JAVA_HOME and PATH environment variables.
What am I doing wrong here?
Im using an AWS ec2 t2.medium instance - do I have to install java on this in order for dsbulk to work?
Yes, DSBulk doesn’t include Java into it, so you need to install Java yourself - via apt, or whatever you use
Related
We have a 3-node cluster with ElasticSearch 6.4.3 on Ubuntu 16.04. There is nothing existing outside of the fresh install of ES - no indexes, no Kibana, no Beats, no Logstash, etc.
I have been asked to downgrade to version 6.4.2. I have limited Linux experience, but enough to be able to run command line commands and understand the output. Google has lead me to bits and pieces around accomplishing this, but I'd feel a lot less anxiety around it if someone with ES experience may be able to point me to something that's a bit more step-by-step.
I do have this link to download 6.4.2, but one of the things I need to know is which file to download: https://www.elastic.co/downloads/past-releases/elasticsearch-6-4-2
Sure here you go with step by step guide, As I did this for you, using your version.
Using this link https://www.elastic.co/downloads/past-releases/elasticsearch-6-4-2, which you mentioned, download the tar file to your local system.
Use SCP to transfer the .tar file to your ubuntu instance, I used my AWS ubuntu instance.
scp -i ~/your-identity-file ~/Desktop/elasticsearch-6.4.2.tar.gz
ubuntu#aws-ec2-instance-ip:/home/ubuntu
Untar file using tar -xvf elasticsearch-6.4.2.tar.gz command.
Go to config folder like cd elasticsearch-6.4.2/config/ and set the proper values in elasticsearch.config.
Start the elasticsearch from bin folder ./elastic command.
Update:- Based on the chat with OP, Adding official ES link https://www.elastic.co/guide/en/elasticsearch/reference/current/targz.html and https://www.elastic.co/guide/en/elasticsearch/reference/current/install-elasticsearch.html for detailed instruction.
I have a lot of log files from JBoss Fuse that I want to visualize in Kibana.
I've installed Elasticsearch and Kibana.
I have also installed the plugin ingest-geoip (bin/elasticsearch-plugin install ingest-geoip).
Now I am trying to install Filebeat.
I've done this OK:
curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-6.2.2-darwin-x86_64.tar.gz
tar xzvf filebeat-6.2.2-darwin-x86_64.tar.gz
cd filebeat-6.2.2-darwin-x86_64/
But when I want to run it I get the following:
sindre#selite:/usr/lib/filebeat$ ./filebeat modules enable system
bash: ./filebeat: cannot execute binary file: Exec format error
NB! This is my first time using Kibana. Please point me in the right direction if I am using it wrong. As I wrote earlier I want to use it for Jboss Fuse Log files.
filebeat-6.2.2-darwin-x86_64
There's your clue. darwin is the name given to the core OS-X unix distribution
https://en.wikipedia.org/wiki/Darwin_(operating_system)
It is extremely unlikely that a compiled darwin binary would be compatible with a linux system.
You really want to be looking at the Linx X86 64 package
If you have running instance of Kibana on your system, you can easily configure it for any underlying operating system(Linux/macOS) with a few provided commands:
visit: Home>>Add data>>System logs
current_url_for_demo: http://localhost:5601/app/kibana#/home/tutorial/systemLogs?_g=()
Visual Explanation:
When I write jmeter in my terminal I have this error.
An error occurred: Unable to make field private static java.lang.String sun.awt.X11.XToolkit.awtAppClassName accessible: module java.desktop does not "opens sun.awt.X11" to unnamed module #4d3167f4
Download latest Oracle JRE or JDK and unpack it somewhere, i.e. to /opt/java folder
Download latest JMeter and unpack it to /opt/jmeter folder
Amend PATH environment variable to start with the "bin" folder of Oracle JDK installation like:
PATH=/opt/java/bin:$PATH && export PATH
In the same terminal window navigate to JMeter folder
pushd /opt/jmeter
Execute JMeter
./jmeter
More information: How to Get Started With JMeter: Part 1 - Installation & Test Plans
Check which version of Java you are running. I received this same error on another java application when I started using Java 9 EA. I downloaded jmeter just out of curiosity and get the same error.
I had this same issue installing openjdk-9-jre on
Ubuntu Gnome 17.04
installing the "older" Version via
sudo apt-get install openjdk-8-jre
worked for me right away.
https://wiki.ubuntuusers.de/Java/Installation/OpenJDK/
Can some guide me .. for installing Mule ESB(mule-standalone-3.3.1) in Ubuntu . I am unable to find any documentation for installing. i want to automate it through Chef.
It's can be as simple as downloading and unpacking the archive file from: http://dist.codehaus.org/mule/distributions/mule-standalone-3.3.1.zip
Note: You need jdk 6/7 installed first.
Here's a chef cookbook that does this: https://github.com/ryandcarter/mule-cookbook
And here's a Vagrant script for running the mule cookbook on ubuntu etc: https://github.com/ryandcarter/vagrant-mule
It is very simple.
Download and unpacking the archive file from: http://dist.codehaus.org/mule/distributions/mule-standalone-3.3.1.zip or whatever version you want to install.
put this unpack file to anywhere where you want like /opt/ or /usr/local/
put you mule application inside apps folder.
& go to bin directory and run ./mule start command. Now mule server is running. You can also check mule log inside log folder mule.log file
This is an old question, but in case there are others who are looking.
You want to install Mule as a Ubuntu Service, so that it restarts when The server restarts. There are a couple of basic steps to this
I detailed out instructions and installation files at my github repository
https://github.com/jamesontriplett/mule_linux_service_install
Steps in general:
Install a startup script in /etc/init.d
Install a startup parameter file in /etc/mule
Customize parameters in the wrapper.conf file in /conf/wrapper.conf
Install the license file onto the server if using enterprise
Add the startup script to the run levels.
To test, you want to reboot the linux service to make sure that it will come back after a reboot. If it doesn't you have a reliability issue.
I have installed mongodb for mac os through 10gen and I have gone through the documentation to do so. Everything seems fine apart from the configuration file. I can not see it in /etc/mongod.config. Do I have to manually create this config file? And if so how can I go about it?
cheers
The default path for brew installed mongodb on Mac OS X is /usr/local/etc/mongod.conf
Unless you have installed a packaged version of MongoDB (for example, using Homebrew or Mac Ports) you will have to create a config file manually, or just pass the appropriate command line parameters when starting up MongoDB.
If you want a commented example of a config file to start with, the mongodb.conf in the Debian/Ubuntu package should be a good starting point. Important options to check are the dbpath and logpath which will likely be different for you.
It would also be worth looking at the Homebrew mongodb formula which includes setting up a LaunchAgent script to manage the mongod service.
Yes, unless you install via a package manager (like apt or yum on Linux) you have to create this manually. Then, When you start mongod you simply need to specify where the config file is, for example:
./mongod -f /path/to/mongod.conf
For how that file should look, just take a look here:
http://docs.mongodb.org/manual/reference/configuration-options/
You can also see the aforementioned Linux config files from the packages on github:
https://github.com/mongodb/mongo/blob/master/rpm/mongod.conf
https://github.com/mongodb/mongo/blob/master/debian/mongodb.conf
In the case you installed MongoDB without Homebrew, i.e. downloaded the TGZ package directly from MongoDB Download Center, you will can add the configuration file:
sudo nano /etc/mongod.conf
Please use only spaces (no tabs) in the file and leave a space after the key. For example:
security:
authorization: enabled
net:
port: 27017
bindIp: 0.0.0.0
And then run the instance with the configuration flag:
mongod -f /etc/mongod.conf
I wrote a post about installing MongoDB Community Edition directly from the TGZ archive.