I have the following command, which puts an overlay.mov file ontop of a .mp4 file. It works great but i'm wondering if the command i'm using can be sped up.
ffmpeg -loglevel quiet -i 'assets/videos/background.mp4' -i 'assets/videos/overlay.mov' -filter_complex '[1:v][0:v]scale2ref[ua][b];[ua]setsar=1,format=yuva444p,colorchannelmixer=aa=0.5[u];[b][u]overlay=eof_action=pass[v]' -map [v] -map 0:a -preset medium -y 'assets/videos/output.mov'
I know i can change -preset to ultrafast but is there a way i can improve the above command? Anything obsolete?
If you dont want to reencode video you can use the same codec, ffmpeg just move mov format to mp4 format, and It very fast.
ffmpeg -i input.mov -c:v copy out.mp4
I want to use FFMPEG (the latest version) to cut a 24 fps matroska file. So I am using -ss and -t, but I noticed with VLC that the very first frame is ALWAYS duplicated one time, no matter the file or the duration I choose. While it is not a really serious issue, but I wanted to know if there was a way to prevent that.
Here is the command I am using:
ffmpeg -ss 00:01:26.086 -i file.mkv -t 00:00:02.000 -c:v libx264 -crf 18 output.mp4
add -vsync vfr in your cmd may be helpful
ffmpeg -ss 00:01:26.086 -i file.mkv -vsync vfr -t 00:00:02.000 -c:v libx264 -crf 18 output.mp4
I am using ffmpeg to encode livestreams for use in a tvheadend server. ffmpeg and hls discontinuities dont work, but ive fixed that using streamlink to read the hls stream then pipe that into ffmpeg.
Sometimes the audio has gaps in the live stream and the audio goes out of sync from that point on, I have managed to fix this using aresample=async=1. ffmpeg inserts silence for the gaps and audio stays synced.
Tvheadend doesnt like dts discontinuities and the stream will freeze whenever one is encountered. I have also fixed this with dts_delta_threshold 1. With this option the stream plays seamlessly without any freezes
Here is where my problem comes in when using dts_delta_threshold 1 the aresample command no longer works, I assume because there are no more gaps so it cant insert the silence. Ive tried various combinations and ordering of options.
Is there any way to apply the aresample=async=1 and also the dts_delta_threshold 1 command after.
This is my current command
streamlink -l warning --ringbuffer-size 64M --hls-timeout 100000000 --hls-live-restart hls://192.168.10.1/play/$1.$2.m3u8 best -O | \
ffmpeg -loglevel fatal -err_detect ignore_err \
-f mpegts -i - \
-filter_complex "eq=contrast=${3:-1.0}" \
-c:v libx264 -crf 18 -preset superfast -tune zerolatency -pix_fmt yuv420p -force_key_frames "expr:gte(t,n_forced*2)" \
-c:a aac -b:a 256k -ac 2 -af aresample=async=1 \
-metadata service_provider=$1 -metadata service_name="$1.$2" -f mpegts pipe:1
Ive tried putting the dts_delta_threshold before and after input, same thing audio goes out of sync if there is a gap in audio. Ive tried putting async 1 before input but that doesnt work either
I'm doing screen recordings of gameplay (Dota2) using my NVIDIA graphics card GeForce experience hardware recording (NVEC Encoder). This creates a variable frame rate output video. My NVIDIA settings are 60 fps 15000 kbps. I have paid a guy to make a program that generates scripts that given start/stop timepoints can extract clips from the video and merge them with crossfade. See example code below. The script works for many input recordings but fails often: The audio and video are desynchronized (usually audio delay) in many of the clips, ca 0.5 seconds. I think it fails more when frame rate dropped more during recording. He does not know how to fix the problem, and I wonder if anyone could point out if anything could be fixed in the script (example below)?
Processing speed is quite important (now making a 10 min 'highlight' video takes ca 7-10 min). Solutions increasing that amount very much more is not of too big interest, unfortunately. His approach has been to work separately with audio and video and merge in the end. He already has a program to make ffmpeg code for working with different scenarios (also adding overlays, adding music, intro/outro) so it would be preferable with some easy fixes to his code and not dramatic redesigning of the logic. But if nothing else can fix the problem, a redesign in logic is ok. Using other tools than ffmpeg is also ok, but should be automatable (scripts/cli) and not increase processing times too much.
Running the program "mediainfo" on the input video shows that framerate dropped quite low for this input video:
Frame rate mode: Variable
Frame rate : 60.000 FPS
Minimum frame rate: 3.059 FPS
Maximum frame rate: 63.739 FPS
Full report here: https://pastebin.com/TX061Wih
The input video can be downloaded from dropbox here (6 GB):
https://www.dropbox.com/s/ftwdgapazbi62pr/fullgame.mp4?dl=0
Here the example of a script when asked to extract two clips from input video at 9:57 (41 sec length) and 15:45 (28 sec length) and crossfade merge them with a 0.5 crossfade time. There might be some code-remnants from options that are not used in this example (overlays, music, intro/outro). Using the input video above, this creates audio/video desync.
6 commands excecuted in sequence:
ffmpeg.exe -loglevel warning -ss 00:09:57 -i fullgame.mp4 -t 00:00:41 -filter_complex "[0:a]afade=t=out:st=40.5:d=0.5[a1]" -map "[a1]" -y out_temp_00.mp4.wav
ffmpeg.exe -loglevel warning -i fullgame.mp4 -ss 00:09:57 -t 00:00:41 -an -vcodec copy -f mpegts -avoid_negative_ts make_zero -y out_temp_00.mp4.ts
ffmpeg.exe -loglevel warning -ss 00:15:45 -i fullgame.mp4 -t 00:00:28 -filter_complex "[0:a]afade=t=in:st=0:d=0.5[a1]" -map "[a1]" -y out_temp_01.mp4.wav
ffmpeg.exe -loglevel warning -i fullgame.mp4 -ss 00:15:45 -t 00:00:28 -an -vcodec copy -f mpegts -avoid_negative_ts make_zero -y out_temp_01.mp4.ts
ffmpeg.exe -loglevel warning -i out_temp_00.mp4.wav -i out_temp_01.mp4.wav -y -filter_complex "[0:a]adelay=0|0[a0];[1:a]adelay=40500|40500[a1];[a0][a1]amix=inputs=2:dropout_transition=68.5,atrim=duration=68.5[outa0];[outa0]loudnorm[outa]" -map "[outa]" -ar 48000 -acodec aac -strict -2 fullgame_Output.mp4.aac
ffmpeg.exe -loglevel warning -i out_temp_00.mp4.ts -i out_temp_01.mp4.ts -y -i fullgame_Output.mp4.aac -filter_complex "[0:v]trim=start=0.5,setpts=PTS-STARTPTS[0c];[1:v]trim=start=0.5,setpts=PTS-STARTPTS[1c];[0:v]trim=40.5:41,setpts=PTS-STARTPTS[fo];[1:v]trim=0:0.5[fi];[fi]format=pix_fmts=yuva420p,fade=t=in:st=0:d=0.5:alpha=1[z];[fo]format=pix_fmts=yuva420p,fade=t=out:st=0:d=0.5:alpha=1[x];[z]fifo[w];[x]fifo[q];[q][w]overlay[r];[0c][r][1c]concat=n=3[outv]" -map "[outv]" -map 2:a -shortest -acodec copy -vcodec libx264 -preset ultrafast -b 15000k -aspect 1920:1080 fullgame_Output.mp4
P.S.
I already asked for help at an ffmpeg chat room. One guy said he knew what the problem was, but didnt know how to fix it(?):
[00:10] <kepstin> oh, wait, you're using -vcodec copy
[00:10] <kepstin> that explains everything.
[00:10] <kepstin> when you're using -vcodec copy, the start time (set with -ss) is rounded to the nearest keyframe
[00:10] <kepstin> it's not exact
[00:11] <kepstin> depending on the keyframe interval, this will result in possibly quite large shifts
[00:11] <kepstin> (also, your commands are applying audio filters on commands with -an, which is confusing/contradictory)
[00:12] <birdboy88> so the problem is that the audio temporary clips are not being extracted from the same excat timepoints?
[00:13] <kepstin> birdboy88: yeah, your audio is being re-encoded to wav so it's being cut sample-accurate, but the video's not being precisely cut.
[00:16] <birdboy88> kepstin: so I need to use slow seek (?) to extract video accurately? Or somehow extract audio only where there are video keyframes?
[00:17] <kepstin> birdboy88: i don't know how to extract audio starting at video keyframes with ffmpeg cli. You're already doing slow seek, which doesn't help (you should move the -ss option to before the -i option to speed it up)
[00:17] <kepstin> if you want accurate video cutting when saving to a file, you have to re-encode the video
[00:18] <kepstin> (doing this in a single ffmpeg command means you don't have to save to a file, so you can avoid the issue)
[00:18] * kepstin is off for a bit now
EDIT:
Everything is done with the latest ffmpeg version.
I was unable to get Gyan's code to work. It always loses some audio (audio is either 40.5 or 27.5, so only one audio is used). This is the only one working for me (changes were adelay=40500|40500 and amix=inputs=2[a0];[a0]loudnorm):
ffmpeg -i fullgame.mp4 -filter_complex "[0]split=2[vpre][vpost];
[0]asplit=2[apre][apost];
[vpre]trim=start='00:09:57':duration='00:00:41',setpts=PTS-STARTPTS[vpre-t];
[apre]atrim=start='00:09:57':duration='00:00:41',asetpts=PTS-STARTPTS,afade=t=out:st=40.5:d=0.5[apre-t];
[vpost]trim=start='00:15:45':duration='00:00:28',setpts=PTS-STARTPTS,format=yuva420p,fade=t=in:st=0:d=0.5:alpha=1,setpts=PTS+40.5/TB[vpost-t];
[apost]atrim=start='00:15:45':duration='00:00:28',asetpts=PTS-STARTPTS,afade=t=in:st=0:d=0.5,adelay=40500|40500[apost-t];
[vpre-t][vpost-t]overlay[v];
[apre-t][apost-t]amix=inputs=2[a0];[a0]loudnorm[a]" -map "[v]" -map "[a]" -y -c:v libx264 -preset ultrafast -b:v 15000k -aspect 1920:1080 -c:a aac fullgame_Output.mp4
Then I tried using a similar setup but with 3 clips, but on one machine I got error: "Error while filtering: Cannot allocate memory". And my 16 GB memory machine the processing speed is 0.02x! Any way to avoid this? This is the code I tried:
ffmpeg -i fullgame.mp4 -filter_complex "[0]split=3[vpre][vpost][v3];
[0]asplit=3[apre][apost][a3];
[vpre]trim=start=357:duration=41,setpts=PTS-STARTPTS[vpre-t];
[apre]atrim=start=357:duration=41,asetpts=PTS-STARTPTS,afade=t=out:st=40.5:d=0.5[apre-t];
[vpost]trim=start=795:duration=28,setpts=PTS-STARTPTS,format=yuva420p,fade=t=in:st=0:d=0.5:alpha=1,fade=t=out:st=40.5:d=0.5:alpha=1,setpts=PTS+40.5/TB[vpost-t];
[apost]atrim=start=795:duration=28,asetpts=PTS-STARTPTS,afade=t=in:st=0:d=0.5,afade=t=out:st=27.5:d=0.5,adelay=40500|40500[apost-t];
[v3]trim=start=95:duration=30,setpts=PTS-STARTPTS,format=yuva420p,fade=t=in:st=0:d=0.5,setpts=PTS+41+28-0.5/TB[v3-t];
[a3]atrim=start=95:duration=30,asetpts=PTS-STARTPTS,afade=t=in:st=0:d=0.5,adelay=68500|68500[a3-t];
[vpre-t][vpost-t]overlay[v1];
[v1][v3-t]overlay[v];
[apre-t][apost-t][a3-t]amix=inputs=3[a0];
[a0]loudnorm[a]" -map "[v]" -map "[a]" -y -c:v libx264 -preset ultrafast -b:v 15000k -aspect 1920:1080 -c:a aac fullgame_Output.mp4
Just do it in one command.
Besides the keyframe seek issue, which is true, your present sequence has an error in the last command. You have [0:v]trim=start=0.5...[0c] which trims out the first 0.5 seconds and will cause a desync of its own. Since this is the first clip, it should be [0:v]trim=0:40.5.
The full single command should be
ffmpeg -i fullgame.mp4 -filter_complex
"[0]split=2[vpre][vpost];[0]asplit=2[apre][apost];
[vpre]trim=start='00:09:57':duration='00:00:41',setpts=PTS-STARTPTS[vpre-t];
[apre]atrim=start='00:09:57':duration='00:00:41',asetpts=PTS-STARTPTS,afade=t=out:st=40.5:d=0.5[apre-t];
[vpost]trim=start='00:15:45':duration='00:00:28',setpts=PTS-STARTPTS,format=yuva420p,fade=t=in:st=0:d=0.5:alpha=1,setpts=PTS+40.5/TB[vpost-t];
[apost]atrim=start='00:15:45':duration='00:00:28',asetpts=PTS-STARTPTS,afade=t=in:st=0:d=0.5[apost-t];
[vpre-t][vpost-t]overlay[v];
[apre-t][apost-t]acrossfade=d=0.5,loudnorm,aresample=48000[a]"
-map "[v]" -map "[a]" -c:v libx264 -preset ultrafast -b:v 15000k -aspect 1920:1080 -c:a aac fullgame_Output.mp4
Your original sequence had -strict -2 for audio AAC encoding. That hasn't been needed since Dec 2015. You have a very old version of ffmpeg if your ffmpeg throws an error without it. Upgrade first.
I did not test the above with your file, as it will take too long to filter 16 min of Full HD 60 fps video, but I tested the below faster command and it works fine with the latest git build of ffmpeg:
ffmpeg -ss 00:09:57 -t 00:00:41 -i fullgame.mp4 -ss 00:15:45 -t 00:00:28 -i fullgame.mp4 -filter_complex
"[0]afade=t=out:st=40.5:d=0.5[apre-t];
[1]format=yuva420p,fade=t=in:st=0:d=0.5:alpha=1,setpts=PTS+40.5/TB[vpost-t];
[1]afade=t=in:st=0:d=0.5[apost-t];
[0][vpost-t]overlay[v];
[apre-t][apost-t]acrossfade=d=0.5,loudnorm,aresample=48000:ocl=stereo[a]"
-map "[v]" -map "[a]" -c:v libx264 -preset ultrafast -b:v 15000k -aspect 1920:1080 -c:a aac fullgame_Output.mp4
hope one of you can tell me why this ffmpeg command of mine does not draw the desired text. the produced video doesn't have it. here you go:
ffmpeg -f image2 -thread_queue_size 64 -framerate 15.1 -i /home/michael-heuberger/binarykitchen/code/videomail.io/var/local/tmp/clients/videomail.io/11e6-723f-d0aa0bd0-aa9b-f7da27da678f/frames/%d.webp -y -an -vcodec libvpx -filter:v drawtext=fontfile=/home/michael-heuberger/binarykitchen/code/videomail.io/src/assets/fonts/Varela-Regular.ttf:text=www.videomail.io:fontsize=180:fontcolor=white:x=150:y=150:shadowcolor=black:shadowx=2:shadowy=2 -vf scale=trunc(iw/2)*2:trunc(ih/2)*2 -crf 12 -deadline realtime -cpu-used 4 -pix_fmt yuv420p -loglevel warning -movflags +faststart /home/michael-heuberger/binarykitchen/code/videomail.io/var/local/tmp/clients/videomail.io/11e6-723f-d0aa0bd0-aa9b-f7da27da678f/videomail_preview.webm
the crucial part is this video filter:
-filter:v drawtext=fontfile=/home/michael-heuberger/binarykitchen/code/videomail.io/src/assets/fonts/Varela-Regular.ttf:text=www.videomail.io:fontsize=180:fontcolor=white:x=150:y=150:shadowcolor=black:shadowx=2:shadowy=2
does it seem correct to you? if so, then why am i not seeing any text in the videomail_preview.webm video file?
using ffmpeg v2.8.6 here with --enable-libfreetype, --enable-libfontconfig and --enable-libfribidi enabled.
furthermore, the above command has been produced with fluent-ffmpeg.
so, any ideas?
Combine all filters into a single graph, so
-filter:v drawtext=fontfile=/home/michael-heuberger/binarykitchen/code/videomail.io/src/assets/fonts/Varela-Regular.ttf:text=www.videomail.io:fontsize=180:fontcolor=white:x=150:y=150:shadowcolor=black:shadowx=2:shadowy=2 -vf scale=trunc(iw/2)*2:trunc(ih/2)*2
becomes
-filter:v drawtext=fontfile=/home/michael-heuberger/binarykitchen/code/videomail.io/src/assets/fonts/Varela-Regular.ttf:text=www.videomail.io:fontsize=180:fontcolor=white:x=150:y=150:shadowcolor=black:shadowx=2:shadowy=2,scale=trunc(iw/2)*2:trunc(ih/2)*2