Related
Consider we have a sacks of gold and thief wants to get the maximum gold. Thief can take the gold to get maximum by,
1) Taking the Gold from contiguous sacks.
2) Thief should take the same amount of gold from all sacks.
N Sacks 1 <= N <= 1000
M quantity of Gold 0 <= M <= 100
Sample Input1:
3 0 5 4 4 4
Output:
16
Explanation:
4 is the minimum amount he can take from the sacks 3 to 6 to get the maximum value of 16.
Sample Input2:
2 4 3 2 1
Output:
8
Explanation:
2 is the minimum amount he can take from the sacks 1 to 4 to get the maximum value of 8.
I approached the problem using subtracting the values from array and taking the transition point from negative to positive, but this doesn't solves the problem.
EDIT: code provided by OP to find the index:
int temp[6];
for(i=1;i<6;i++){
for(j=i-1; j>=0;j--) {
temp[j] = a[j] - a[i];
}
}
for(i=0;i<6;i++){
if(temp[i]>=0) {
index =i;
break;
}
}
The best amount of gold (TBAG) taken from every sack is equal to weight of some sack. Let's put indexes of candidates in a stack in order.
When we meet heavier weight (than stack contains), it definitely continues "good sequence", so we just add its index to the stack.
When we meet lighter weight (than stack top), it breaks some "good sequences" and we can remove heavier candidates from the stack - they will not have chance to be TBAG later. Remove stack top until lighter weight is met, calculate potentially stolen sum during this process.
Note that stack always contains indexes of strictly increasing sequence of weights, so we don't need to consider items before index at the stack top (intermediate AG) in calculation of stolen sum (they will be considered later with another AG value).
for idx in Range(Sacks):
while (not Stack.Empty) and (Sacks[Stack.Peek] >= Sacks[idx]): //smaller sack is met
AG = Sacks[Stack.Pop]
if Stack.Empty then
firstidx = 0
else
firstidx = Stack.Peek + 1
//range_length * smallest_weight_in_range
BestSUM = MaxValue(BestSUM, AG * (idx - firstidx))
Stack.Push(idx)
now check the rest:
repeat while loop without >= condition
Every item is pushed and popped once, so linear time and space complexity.
P.S. I feel that I've ever seen this problem in another formulation...
I see two differents approaches for the moment :
Naive approach: For each pair of indices (i,j) in the array, compute the minimum value m(i,j) of the array in the interval (i,j) and then compute score(i,j) = |j-i+1|*m(i,j). Take then the maximum score over all the pairs (i,j).
-> Complexity of O(n^3).
Less naive approach:
Compute the set of values of the array
For each value, compute the maximum score it can get. For that, you just have to iterate once over all the values of the array. For example, when your sample input is [3 0 5 4 4 4] and the current value you are looking is 3, then it will give you a score of 12. (You'll first find a value of 3 thanks to the first index, and then a score of 12 due to indices from 2 to 5).
Take the maximum over all values found at step 2.
-> Complexity is here O(n*m), since you have to do at most m times the step 2, and the step 2 can be done in O(n).
Maybe there is a better complexity, but I don't have a clue yet.
I received this interview question and got stuck on it:
There are an infinite number of train stops starting from station number 0.
There are an infinite number of trains. The nth train stops at all of the k * 2^(n - 1) stops where k is between 0 and infinity.
When n = 1, the first train stops at stops 0, 1, 2, 3, 4, 5, 6, etc.
When n = 2, the second train stops at stops 0, 2, 4, 6, 8, etc.
When n = 3, the third train stops at stops 0, 4, 8, 12, etc.
Given a start station number and end station number, return the minimum number of stops between them. You can use any of the trains to get from one stop to another stop.
For example, the minimum number of stops between start = 1 and end = 4 is 3 because we can get from 1 to 2 to 4.
I'm thinking about a dynamic programming solution that would store in dp[start][end] the minimum number of steps between start and end. We'd build up the array using start...mid1, mid1...mid2, mid2...mid3, ..., midn...end. But I wasn't able to get it to work. How do you solve this?
Clarifications:
Trains can only move forward from a lower number stop to a higher number stop.
A train can start at any station where it makes a stop at.
Trains can be boarded in any order. The n = 1 train can be boarded before or after boarding the n = 3 train.
Trains can be boarded multiple times. For example, it is permitted to board the n = 1 train, next board the n = 2 train, and finally board the n = 1 train again.
I don't think you need dynamic programming at all for this problem. It can basically be expressed by binary calculations.
If you convert the number of a station to binary it tells you right away how to get there from station 0, e.g.,
station 6 = 110
tells you that you need to take the n=3 train and the n=2 train each for one station. So the popcount of the binary representation tells you how many steps you need.
The next step is to figure out how to get from one station to another.
I´ll show this again by example. Say you want to get from station 7 to station 23.
station 7 = 00111
station 23 = 10111
The first thing you want to do is to get to an intermediate stop. This stop is specified by
(highest bits that are equal in start and end station) + (first different bit) + (filled up with zeros)
In our example the intermediate stop is 16 (10000). The steps you need to make can be calculated by the difference of that number and the start station (7 = 00111). In our example this yields
10000 - 00111 = 1001
Now you know, that you need 2 stops (n=1 train and n=4) to get from 7 to 16.
The remaining task is to get from 16 to 23, again this can be solved by the corresponding difference
10111 - 10000 = 00111
So, you need another 3 stops to go from 16 to 23 (n= 3, n= 2, n= 1). This gives you 5 stops in total, just using two binary differences and the popcount. The resulting path can be extracted from the bit representations 7 -> 8 -> 16 -> 20 -> 22 -> 23
Edit:
For further clarification of the intermediate stop let's assume we want to go from
station 5 = 101 to
station 7 = 111
the intermediate stop in this case will be 110, because
highest bits that are equal in start and end station = 1
first different bit = 1
filled up with zeros = 0
we need one step to go there (110 - 101 = 001) and one more to go from there to the end station (111 - 110 = 001).
About the intermediate stop
The concept of the intermediate stop is a bit clunky but I could not find a more elegant way in order to get the bit operations to work. The intermediate stop is the stop in between start and end where the highest level bit switches (that's why it is constructed the way it is). In this respect it is the stop at which the fastest train (between start and end) operates (actually all trains that you are able to catch stop there).
By subtracting the intermediate stop (bit representation) from the end station (bit representation) you reduce the problem to the simple case starting from station 0 (cf. first example of my answer).
By subtracting the start station from the intermediate stop you also reduce the problem to the simple case, but assume that you go from the intermediate stop to the start station which is equivalent to the other way round.
First, ask if you can go backward. It sounds like you can't, but as presented here (which may not reflect the question as you received it), the problem never gives an explicit direction for any of these trains. (I see you've now edited your question to say you can't go backward.)
Assuming you can't go backward, the strategy is simple: always take the highest-numbered available train that doesn't overshoot your destination.
Suppose you're at stop s, and the highest-numbered train that stops at your current location and doesn't overshoot is train k. Traveling once on train k will take you to stop s + 2^(k-1). There is no faster way to get to that stop, and no way to skip that stop - no lower-numbered trains skip any of train k's stops, and no higher-numbered trains stop between train k's stops, so you can't get on a higher-numbered train before you get there. Thus, train k is your best immediate move.
With this strategy in mind, most of the remaining optimization is a matter of efficient bit twiddling tricks to compute the number of stops without explicitly figuring out every stop on the route.
I will attempt to prove my algorithm is optimal.
The algorithm is "take the fastest train that doesn't overshoot your destination".
How many stops this is is a bit tricky.
Encode both stops as binary numbers. I claim that an identical prefix can be neglected; the problem of going from a to b is the same as the problem of going from a+2^n to b+2^n if 2^n > b, as the stops between 2^n and 2^(n+1) are just the stops between 0 and 2^n shifted over.
From this, we can reduce a trip from a to b to guarantee that the high bit of b is set, and the same "high" bit of a is not set.
To solve going from 5 (101) to 7 (111), we merely have to solve going from 1 (01) to 3 (11), then shift our stop numbers up 4 (100).
To go from x to 2^n + y, where y < 2^n (and hence x is), we first want to go to 2^n, because there are no trains that skip over 2^n that do not also skip over 2^n+y < 2^{n+1}.
So any set of stops between x and y must stop at 2^n.
Thus the optimal number of stops from x to 2^n + y is the number of stops from x to 2^n, followed by the number of stops from 2^n to 2^n+y, inclusive (or from 0 to y, which is the same).
The algorithm I propose to get from 0 to y is to start with the high order bit set, and take the train that gets you there, then go on down the list.
Claim: In order to generate a number with k 1s, you must take at least k trains. As proof, if you take a train and it doesn't cause a carry in your stop number, it sets 1 bit. If you take a train and it does cause a carry, the resulting number has at most 1 more set bit than it started with.
To get from x to 2^n is a bit trickier, but can be made simple by tracking the trains you take backwards.
Mapping s_i to s_{2^n-i} and reversing the train steps, any solution for getting from x to 2^n describes a solution for getting from 0 to 2^n-x. And any solution that is optimal for the forward one is optimal for the backward one, and vice versa.
Using the result for getting from 0 to y, we then get that the optimal route from a to b where b highest bit set is 2^n and a does not have that bit set is #b-2^n + #2^n-a, where # means "the number of bits set in the binary representation". And in general, if a and b have a common prefix, simply drop that common prefix.
A local rule that generates the above number of steps is "take the fastest train in your current location that doesn't overshoot your destination".
For the part going from 2^n to 2^n+y we did that explicitly in our proof above. For the part going from x to 2^n this is trickier to see.
First, if the low order bit of x is set, obviously we have to take the first and only train we can take.
Second, imagine x has some collection of unset low-order bits, say m of them. If we played the train game going from x/2^m to 2^(n-m), then scaled the stop numbers by multiplying by 2^m we'd get a solution to going from x to 2^n.
And #(2^n-x)/2^m = #2^n - x. So this "scaled" solution is optimal.
From this, we are always taking the train corresponding to our low-order set bit in this optimal solution. This is the longest range train available, and it doesn't overshoot 2^n.
QED
This problem doesn't require dynamic programming.
Here is a simple implementation of a solution using GCC:
uint32_t min_stops(uint32_t start, uint32_t end)
{
uint32_t stops = 0;
if(start != 0) {
while(start <= end - (1U << __builtin_ctz(start))) {
start += 1U << __builtin_ctz(start);
++stops;
}
}
stops += __builtin_popcount(end ^ start);
return stops;
}
The train schema is a map of powers-of-two. If you visualize the train lines as a bit representation, you can see that the lowest bit set represents the train line with the longest distance between stops that you can take. You can also take the lines with shorter distances.
To minimize the distance, you want to take the line with the longest distance possible, until that would make the end station unreachable. That's what adding by the lowest-set bit in the code does. Once you do this, some number of the upper bits will agree with the upper bits of the end station, while the lower bits will be zero.
At that point, it's simply a a matter of taking a train for the highest bit in the end station that is not set in the current station. This is optimized as __builtin_popcount in the code.
An example going from 5 to 39:
000101 5 // Start
000110 5+1=6
001000 6+2=8
010000 8+8=16
100000 16+16=32 // 32+32 > 39, so start reversing the process
100100 32+4=36 // Optimized with __builtin_popcount in code
100110 36+2=38 // Optimized with __builtin_popcount in code
100111 38+1=39 // Optimized with __builtin_popcount in code
As some have pointed out, since stops are all multiples of powers of 2, trains that stop more frequently also stop at the same stops of the more-express trains. Any stop is on the first train's route, which stops at every station. Any stop is at most 1 unit away from the second train's route, stopping every second station. Any stop is at most 3 units from the third train that stops every fourth station, and so on.
So start at the end and trace your route back in time - hop on the nearest multiple-of-power-of-2 train and keep switching to the highest multiple-of-power-of-2 train you can as soon as possible (check the position of the least significant set bit - why? multiples of powers of 2 can be divided by two, that is bit-shifted right, without leaving a remainder, log 2 times, or as many leading zeros in the bit-representation), as long as its interval wouldn't miss the starting point after one stop. When the latter is the case, perform the reverse switch, hopping on the next lower multiple-of-power-of-2 train and stay on it until its interval wouldn't miss the starting point after one stop, and so on.
We can figure this out doing nothing but a little counting and array manipulation. Like all the previous answers, we need to start by converting both numbers to binary and padding them to the same length. So 12 and 38 become 01100 and 10110.
Looking at station 12, looking at the least significant set bit (in this case the only bit, 2^2) all trains with intervals larger than 2^2 won't stop at station 4, and all with intervals less than or equal to 2^2 will stop at station 4, but will require multiple stops to get to the same destination as the interval 4 train. We in every situation, up until we reach the largest set bit in the end value, we need to take the train with the interval of the least significant bit of the current station.
If we are at station 0010110100, our sequence will be:
0010110100 2^2
0010111000 2^3
0011000000 2^6
0100000000 2^7
1000000000
Here we can eliminate all bits smaller than the lest significant set bit and get the same count.
00101101 2^0
00101110 2^1
00110000 2^4
01000000 2^6
10000000
Trimming the ends at each stage, we get this:
00101101 2^0
0010111 2^0
0011 2^0
01 2^0
1
This could equally be described as the process of flipping all the 0 bits. Which brings us to the first half of the algorithm: Count the unset bits in the zero padded start number greater than the least significant set bit, or 1 if the start station is 0.
This will get us to the only intermediate station reachable by the train with the largest interval smaller than the end station, so all trains after this must be smaller than the previous train.
Now we need to get from station to 100101, it is easier and obvious, take the train with an interval equal to the largest significant bit set in the destination and not set in the current station number.
1000000000 2^7
1010000000 2^5
1010100000 2^4
1010110000 2^2
1010110100
Similar to the first method, we can trim the most significant bit which will always be set, then count the remaining 1's in the answer. So the second part of the algorithm is Count all the set significant bits smaller than the most significant bit
Then Add the result from parts 1 and 2
Adjusting the algorithm slightly to get all the train intervals, here is an example written in javascript so it can be run here.
function calculateStops(start, end) {
var result = {
start: start,
end: end,
count: 0,
trains: [],
reverse: false
};
// If equal there are 0 stops
if (start === end) return result;
// If start is greater than end, reverse the values and
// add note to reverse the results
if (start > end) {
start = result.end;
end = result.start;
result.reverse = true;
}
// Convert start and end values to array of binary bits
// with the exponent matched to the index of the array
start = (start >>> 0).toString(2).split('').reverse();
end = (end >>> 0).toString(2).split('').reverse();
// We can trim off any matching significant digits
// The stop pattern for 10 to 13 is the same as
// the stop pattern for 2 to 5 offset by 8
while (start[end.length-1] === end[end.length-1]) {
start.pop();
end.pop();
}
// Trim off the most sigificant bit of the end,
// we don't need it
end.pop();
// Front fill zeros on the starting value
// to make the counting easier
while (start.length < end.length) {
start.push('0');
}
// We can break the algorithm in half
// getting from the start value to the form
// 10...0 with only 1 bit set and then getting
// from that point to the end.
var index;
var trains = [];
var expected = '1';
// Now we loop through the digits on the end
// any 1 we find can be added to a temporary array
for (index in end) {
if (end[index] === expected){
result.count++;
trains.push(Math.pow(2, index));
};
}
// if the start value is 0, we can get to the
// intermediate step in one trip, so we can
// just set this to 1, checking both start and
// end because they can be reversed
if (result.start == 0 || result.end == 0) {
index++
result.count++;
result.trains.push(Math.pow(2, index));
// We need to find the first '1' digit, then all
// subsequent 0 digits, as these are the ones we
// need to flip
} else {
for (index in start) {
if (start[index] === expected){
result.count++;
result.trains.push(Math.pow(2, index));
expected = '0';
}
}
}
// add the second set to the first set, reversing
// it to get them in the right order.
result.trains = result.trains.concat(trains.reverse());
// Reverse the stop list if the trip is reversed
if (result.reverse) result.trains = result.trains.reverse();
return result;
}
$(document).ready(function () {
$("#submit").click(function () {
var trains = calculateStops(
parseInt($("#start").val()),
parseInt($("#end").val())
);
$("#out").html(trains.count);
var current = trains.start;
var stopDetails = 'Starting at station ' + current + '<br/>';
for (index in trains.trains) {
current = trains.reverse ? current - trains.trains[index] : current + trains.trains[index];
stopDetails = stopDetails + 'Take train with interval ' + trains.trains[index] + ' to station ' + current + '<br/>';
}
$("#stops").html(stopDetails);
});
});
label {
display: inline-block;
width: 50px;
}
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<label>Start</label> <input id="start" type="number" /> <br>
<label>End</label> <input id="end" type="number" /> <br>
<button id="submit">Submit</button>
<p>Shortest route contains <span id="out">0</span> stops</p>
<p id="stops"></p>
Simple Java solution
public static int minimumNumberOfStops(int start, final int end) {
// I would initialize it with 0 but the example given in the question states :
// the minimum number of stops between start = 1 and end = 4 is 3 because we can get from 1 to 2 to 4
int stops = 1;
while (start < end) {
start += findClosestPowerOfTwoLessOrEqualThan(end - start);
stops++;
}
return stops;
}
private static int findClosestPowerOfTwoLessOrEqualThan(final int i) {
if (i > 1) {
return 2 << (30 - Integer.numberOfLeadingZeros(i));
}
return 1;
}
NOTICE: Reason for current comments under my answer is that first I wrote this algorithm completely wrong and user2357112 awared me from my mistakes. So I completely removed that algorithm and wrote a new one according to what user2357112 answered to this question. I also added some comments into this algorithm to clarify what happens in each line.
This algorithm starts at procedure main(Origin, Dest) and it simulate our movements toward destination with updateOrigin(Origin, Dest)
procedure main(Origin, Dest){
//at the end we have number of minimum steps in this variable
counter = 0;
while(Origin != Dest){
//we simulate our movement toward destination with this
Origin = updateOrigin(Origin, Dest);
counter = counter + 1;
}
}
procedure updateOrigin(Origin, Dest){
if (Origin == 1) return 2;
//we must find which train pass from our origin, what comes out from this IF clause is NOT exact choice and we still have to do some calculation in future
if (Origin == 0){
//all trains pass from stop 0, thus we can choose our train according to destination
n = Log2(Dest);
}else{
//its a good starting point to check if it pass from our origin
n = Log2(Origin);
}
//now lets choose exact train which pass from origin and doesn't overshoot destination
counter = 0;
do {
temp = counter * 2 ^ (n - 1);
//we have found suitable train
if (temp == Origin){
//where we have moved to
return Origin + 2 ^ ( n - 1 );
//we still don't know if this train pass from our origin
} elseif (temp < Origin){
counter = counter + 1;
//lets check another train
} else {
n = n - 1;
counter = 0;
}
}while(temp < origin)
}
This grade 11 problem has been bothering me since 2010 and I still can't figure out/find a solution even after university.
Problem Description
There is a very unusual street in your neighbourhood. This street
forms a perfect circle, and the circumference of the circle is
1,000,000. There are H (1 ≤ H ≤ 1000) houses on the street. The
address of each house is the clockwise arc-length from the
northern-most point of the circle. The address of the house at the
northern-most point of the circle is 0. You also have special firehoses
which follow the curve of the street. However, you wish to keep the
length of the longest hose you require to a minimum. Your task is to
place k (1 ≤ k ≤ 1000) fire hydrants on this street so that the maximum
length of hose required to connect a house to a fire hydrant is as
small as possible.
Input Specification
The first line of input will be an integer H, the number of houses. The
next H lines each contain one integer, which is the address of that
particular house, and each house address is at least 0 and less than
1,000,000. On the H + 2nd line is the number k, which is the number of
fire hydrants that can be placed around the circle. Note that a fire
hydrant can be placed at the same position as a house. You may assume
that no two houses are at the same address. Note: at least 40% of the
marks for this question have H ≤ 10.
Output Specification
On one line, output the length of hose required
so that every house can connect to its nearest fire hydrant with that
length of hose.
Sample Input
4
0
67000
68000
77000
2
Output for Sample Input
5000
Link to original question
I can't even come up with a brutal force algorithm since the placement might be float number. For example if the houses are located in 1 and 2, then the hydro should be placed at 1.5 and the distance would be 0.5
Here is quick outline of an answer.
First write a function that can figures out whether you can cover all of the houses with a given maximum length per hydrant. (The maximum hose will be half that length.) It just starts at a house, covers all of the houses it can, jumps to the next, and ditto, and sees whether you stretch. If you fail it tries starting at the next house instead until it has gone around the circle. This will be a O(n^2) function.
Second create a sorted list of the pairwise distances between houses. (You have to consider it going both ways around for a single hydrant, you can only worry about the shorter way if you have 2+ hydrants.) The length covered by a hydrant will be one of those. This takes O(n^2 log(n)).
Now do a binary search to find the shortest length that can cover all of the houses. This will require O(log(n)) calls to the O(n^2) function that you wrote in the first step.
The end result is a O(n^2 log(n)) algorithm.
And here is working code for all but the parsing logic.
#! /usr/bin/env python
def _find_hoses_needed (circle_length, hose_span, houses):
# We assume that houses is sorted.
answers = [] # We can always get away with one hydrant per house.
for start in range(len(houses)):
needed = 1
last_begin = start
current_house = start + 1 if start + 1 < len(houses) else 0
while current_house != start:
pos_begin = houses[last_begin]
pos_end = houses[current_house]
length = pos_end - pos_begin if pos_begin <= pos_end else circle_length + pos_begin - pos_end
if hose_span < length:
# We need a new hose.
needed = needed + 1
last_begin = current_house
current_house = current_house + 1
if len(houses) <= current_house:
# We looped around the circle.
current_house = 0
answers.append(needed)
return min(answers)
def find_min_hose_coverage (circle_length, hydrant_count, houses):
houses = sorted(houses)
# First we find all of the possible answers.
is_length = set()
for i in range(len(houses)):
for j in range(i, len(houses)):
is_length.add(houses[j] - houses[i])
is_length.add(houses[i] - houses[j] + circle_length)
possible_answers = sorted(is_length)
# Now we do a binary search.
lower = 0
upper = len(possible_answers) - 1
while lower < upper:
mid = (lower + upper) / 2 # Note, we lose the fraction here.
if hydrant_count < _find_hoses_needed(circle_length, possible_answers[mid], houses):
# We need a strictly longer coverage to make it.
lower = mid + 1
else:
# Longer is not needed
upper = mid
return possible_answers[lower]
print(find_min_hose_coverage(1000000, 2, [0, 67000, 68000, 77000])/2.0)
I'm implementing an m,n,k-game, a generalized version of tic-tac-toe, where m is the number of rows, n is the number of columns and k is the number of pieces that a player needs to put in a row to win. I have implemented a check for a win, but I haven't figured out a satisfactory way to check before the board is full of pieces, if no player can win the game. In other words, there might be empty slots on the board, but they cannot be filled in such a way that one player would win.
My question is, how to check this efficiently? The following algorithm is the best that I can think of. It checks for two conditions:
A. Go over all board positions in all 4 directions (top to bottom, right to left, and both diagonal directions). If say k = 5, and 4 (= k-1) consecutive empty slots are found, stop checking and report "no tie". This doesn't take into account for example the following situation:
OX----XO (Example 1)
where a) there are 4 empty consecutive slots (-) somewhere between two X's, b) next it is O's turn, c) there are less than four other empty positions on the board and no player can win by putting pieces to those, and d) it is not possible to win in any other direction than horizontally in the shown slots either. Now we know that it is a tie because O will eventually block the last winning possibility, but erroneously it is not reported yet because there are four consecutive empty slots. That would be ok (but not great). Checking this condition gives a good speed-up at the beginning when the checking algorithm usually finds such a case early, but it gets slower as more pieces are put on the board.
B. If this k-1-consecutive-empty-slots-condition isn't met, the algorithm would check the slots again consecutively in all 4 directions. Suppose we are currently checking from left to right. If at some point an X is encountered and it was preceded by an O or - (empty slot) or a board border, then start counting the number of consecutive X's and empty slots, counting in this first encountered X. If one can count to 5, then one knows it is possible for X to win, and "no tie" is reported. If an O preceded by an X is encountered before 5 consecutive X's, then X cannot win in those 5 slots from left to right starting from where we started counting. For example:
X-XXO (Example 2)
12345
Here we started checking at position 1, counted to 4, and encountered an O. In this case, one would continue from the encountered O in the same way, trying to find 5 consecutive O's or empty slots this time. In another case when counting X's or empty slots, an O preceded by one or more empty slots is encountered, before counting to 5. For example:
X-X-O (Example 3)
12345
In this case we would again continue from the O at position 5, but add to the new counter (of consecutive O's or empty slots) the number of consecutive empty slots that preceded O, here 1, so that we wouldn't miss for example this possible winning position:
X-X-O---X (Example 4)
In this way, in the worst case, one would have to go through all positions 4 times (4 directions, and of course diagonals whose length is less than k can be skipped), giving running time O(mn).
The best way I could think of was doing these two described checks, A and B, in one pass. If the checking algorithm gets through all positions in all directions without reporting "no tie", it reports a tie.
Knowing that you can check a win just by checking in the vicinity of the last piece that was added with running time O(k), I was wondering if there were quicker ways to do an early check for a tie. Doesn't have to be asymptotically quicker. I'm currently keeping the pieces in a two-dimensional array. Is there maybe a data structure that would allow an efficient check? One approach: what is the highest threshold of moves that one can wait the players to make before running any checks for a tie at all?
There are many related questions at Stack Overflow, for example this, but all discussions I could find either only pointed out the obvious tie condition, where the number of moves made is equal to the size of the board (or they checked if the board is full), or handled only the special case where the board is square: m = n. For example this answer claims to do the check for a tie in constant time, but only works when m = n = k. I'm interested in reporting the tie as early as possible and for general m,n and k. Also if the algorithm works for more than two players, that would be neat.
I would reduce the problem of determining a tie to the easier sub-problem:
Can player X still win?
If the answer is 'no' for all players, it is a tie.
To find out whether Player X can win:
fill all blank spaces with virtual 'X'-pieces
are there k 'X'-pieces in a row anywhere?
if there are not --> Player X cannot win. return false.
if there are, find the row of k stones with the least amount of virtual pieces. Count the number of virtual pieces in it.
count the number of moves player X has left, alternating with all other players, until the board is completely full.
if the number of moves is less than the amount of virtual pieces required to win, player X cannot win. return false.
otherwise, player X can still win. return true.
(This algorithm will report a possible win for player X even in cases where the only winning moves for X would have another player win first, but that is ok, since that would not be a tie either)
If, as you said, you can check a win just by checking in the vicinity of the last piece that was added with running time O(k), then I think you can run the above algorithm in O(k * Number_of_empty_spots): Add all virtual X-Piece, note any winning combinations in the vicinity of the added pieces.
The number of empty slots can be large, but as long as there is at least one empty row of size k and player X has still k moves left until the board is filled, you can be sure that player X can still win, so you do not need to run the full check.
This should work with any number of players.
Actually the constant time solution you referenced only works when k = m = n as well. If k is smaller then I don't see any way to adapt the solution to get constant time, basically because there are multiple locations on each row/column/diagonal where a winning consecutive k 0's or 1's may occur.
However, maintaining auxiliary information for each row/column/diagonal can give a speed up. For each row/column/diagonal, you can store the start and end locations for consecutive occurrences of 1's and blanks as possible winning positions for player 1, and similarly store start and end locations of consecutive occurrences of 0's and blanks as possible winning positions for player 0. Note that for a given row/column/diagonal, intervals for player 0 and 1 may overlap if they contain blanks. For each row/column/diagonal, store the intervals for player 1 in sorted order in a self-balancing binary tree (Note you can do this because the intervals are disjoint). Similarly store the intervals for player 0 sorted in a tree. When a player makes a move, find the row/column/diagonals that contain the move location and update the intervals containing the move in the appropriate row column and diagonal trees for the player that did not make the move. For the player that did not make a move, this will split an interval (if it exists) into smaller intervals that you can replace the old interval with and then rebalance the tree. If an interval ever gets to length less than k you can delete it. If a tree ever becomes empty then it is impossible for that player to win in that row/column/diagonal. You can maintain a counter of how many rows/columns/diagonals are impossible to win for each player, and if the counter ever reaches the total number of rows/columns/diagonals for both players then you know you have a tie. The total running time for this is O(log(n/k) + log(m/k)) to check for a tie per move, with O(mn/k) extra space.
You can similarly maintain trees that store consecutive intervals of 1's (without spaces) and update the trees in O(log n + log m) time when a move is made, basically searching for the positions before and after the move in your tree and updating the interval(s) found and merging two intervals if two intervals (before and after) are found. Then you report a win if an interval is ever created/updated and obtains length greater than or equal to k. Similarly for player 0. Total time to check for a win is O(log n + log m) which may be better than O(k) depending on how large k is. Extra space is O(mn).
Let's look at one row (or column or diagonal, it doesn't matter) and count the number of winning lines of length k ("k-line") it's possible to make, at each place in the row, for player X. This solution will keep track of that number over the course of the game, checking fulfillment of the winning condition on each move as well as detecting a tie.
1 2 3... k k k k... 3 2 1
There is one k-line including an X in the leftmost slot, two with the second slot from the left, and so on. If an opposing player, O or otherwise, plays in this row, we can reduce the k-line possibility counts for player X in O(k) time at the time of the move. (The logic for this step should be straightforward after doing an example, needing no other data structure, but any method involving checking each of the k rows of k from will do. Going left to right, only k operations on the counts is needed.) An enemy piece should set the possibility count to -1.
Then, a detectably tied game is one where no cell has a non-zero k-line possibility count for any player. It's easy to check this by keeping track of the index of the first non-zero cell. Maintaining the structure amounts to O(k*players) work on each move. The number of empty slots is less than those filled, for positions that might be tied, so the other answers are good for checking a position in isolation. However, at least for reasonably small numbers of players, this problem is intimately linked with checking the winning condition in the first place, which at minimum you must do, O(k), on every move. Depending on your game engine there may be a better structure that is rich enough to find good moves as well as detect ties. But the possibility counting structure has the nice property that you can check for a win whilst updating it.
If space isn't an issue, I had this idea:
For each player maintain a structure sized (2mn + (1 - k)(m + n) + 2(m - k + 1)(n - k + 1) + 2(sum 1 to (m - k))) where each value represents if one of another player's moves are in one distinct k-sized interval. For example for a 8-8-4 game, one element in the structure could represent row 1, cell 0 to 3; another row 1, cell 1 to 4; etc.
In addition, one variable per player will represent how many elements in their structure are still unset. Only one move is required to set an element, showing that that k-interval can no longer be used to win.
An update of between O(k) and O(4k) time per player seems needed per move. A tie is detected when the number of players exceeds the number of different elements unset.
Using bitsets, the number of bytes needed for each player's structure would be the structure size divided by 8. Notice that when k=m=n, the structure size is 4*k and update time O(4). Less than half a megabyte per player would be needed for a 1000,1000,5 game.
Below is a JavaScript example.
var m = 1000, n = 1000, k = 5, numberOfPlayers = 2
, numberOfHorizontalKIs = m * Math.max(n - k + 1,0)
, numberOfverticalKIs = n * Math.max(m - k + 1,0)
, horizontalVerticalKIArraySize = Math.ceil((numberOfHorizontalKIs + numberOfverticalKIs)/31)
, horizontalAndVerticalKIs = Array(horizontalVerticalKIArraySize)
, numberOfUnsetKIs = horizontalAndVerticalKIs
, upToM = Math.max(0,m - k) // southwest diagonals up to position m
, upToMSum = upToM * (upToM + 1) / 2
, numberOfSouthwestKIs = 2 * upToMSum //sum is multiplied by 2 to account for bottom-right-corner diagonals
+ Math.max(0,n - m + 1) * (m - k + 1)
, diagonalKIArraySize = Math.ceil(2 * numberOfSouthwestKIs/31)
, diagonalKIs = Array(diagonalKIArraySize)
, numberOfUnsetKIs = 2 * numberOfSouthwestKIs + numberOfHorizontalKIs + numberOfverticalKIs
function checkTie(move){
var row = move[0], column = move[1]
//horizontal and vertical
for (var rotate=0; rotate<2; rotate++){
var offset = Math.max(k - n + column, 0)
column -= offset
var index = rotate * numberOfHorizontalKIs + (n - k + 1) * row + column
, count = 0
while (column >= 0 && count < k - offset){
var KIArrayIndex = Math.floor(index / 31)
, bitToSet = 1 << index % 31
if (!(horizontalAndVerticalKIs[KIArrayIndex] & bitToSet)){
horizontalAndVerticalKIs[KIArrayIndex] |= bitToSet
numberOfUnsetKIs--
}
index--
column--
count++
}
//rotate board to log vertical KIs
var mTmp = m
m = n
n = mTmp
row = move[1]
column = move[0]
count = 0
}
//rotate board back
mTmp = m
m = n
n = mTmp
// diagonals
for (var rotate=0; rotate<2; rotate++){
var diagonalTopColumn = column + row
if (diagonalTopColumn < k - 1 || diagonalTopColumn >= n + m - k){
continue
} else {
var offset = Math.max(k - m + row, 0)
row -= offset
column += offset
var dBeforeM = Math.min (diagonalTopColumn - k + 1,m - k)
, dAfterM = n + m - k - diagonalTopColumn
, index = dBeforeM * (dBeforeM + 1) / 2
+ (m - k + 1) * Math.max (Math.min(diagonalTopColumn,n) - m + 1,0)
+ (diagonalTopColumn < n ? 0 : upToMSum - dAfterM * (dAfterM + 1) / 2)
+ (diagonalTopColumn < n ? row : n - 1 - column)
+ rotate * numberOfSouthwestKIs
, count = 0
while (row >= 0 && column < n && count < k - offset){
var KIArrayIndex = Math.floor(index / 31)
, bitToSet = 1 << index % 31
if (!(diagonalKIs[KIArrayIndex] & bitToSet)){
diagonalKIs[KIArrayIndex] |= bitToSet
numberOfUnsetKIs--
}
index--
row--
column++
count++
}
}
//mirror board
column = n - 1 - column
}
if (numberOfUnsetKIs < 1){
return "This player cannot win."
} else {
return "No tie."
}
}
I came across this question
ADZEN is a very popular advertising firm in your city. In every road
you can see their advertising billboards. Recently they are facing a
serious challenge , MG Road the most used and beautiful road in your
city has been almost filled by the billboards and this is having a
negative effect on
the natural view.
On people's demand ADZEN has decided to remove some of the billboards
in such a way that there are no more than K billboards standing together
in any part of the road.
You may assume the MG Road to be a straight line with N billboards.Initially there is no gap between any two adjecent
billboards.
ADZEN's primary income comes from these billboards so the billboard removing process has to be done in such a way that the
billboards
remaining at end should give maximum possible profit among all possible final configurations.Total profit of a configuration is the
sum of the profit values of all billboards present in that
configuration.
Given N,K and the profit value of each of the N billboards, output the maximum profit that can be obtained from the remaining
billboards under the conditions given.
Input description
1st line contain two space seperated integers N and K. Then follow N lines describing the profit value of each billboard i.e ith
line contains the profit value of ith billboard.
Sample Input
6 2
1
2
3
1
6
10
Sample Output
21
Explanation
In given input there are 6 billboards and after the process no more than 2 should be together. So remove 1st and 4th
billboards giving a configuration _ 2 3 _ 6 10 having a profit of 21.
No other configuration has a profit more than 21.So the answer is 21.
Constraints
1 <= N <= 1,00,000(10^5)
1 <= K <= N
0 <= profit value of any billboard <= 2,000,000,000(2*10^9)
I think that we have to select minimum cost board in first k+1 boards and then repeat the same untill last,but this was not giving correct answer
for all cases.
i tried upto my knowledge,but unable to find solution.
if any one got idea please kindly share your thougths.
It's a typical DP problem. Lets say that P(n,k) is the maximum profit of having k billboards up to the position n on the road. Then you have following formula:
P(n,k) = max(P(n-1,k), P(n-1,k-1) + C(n))
P(i,0) = 0 for i = 0..n
Where c(n) is the profit from putting the nth billboard on the road. Using that formula to calculate P(n, k) bottom up you'll get the solution in O(nk) time.
I'll leave up to you to figure out why that formula holds.
edit
Dang, I misread the question.
It still is a DP problem, just the formula is different. Let's say that P(v,i) means the maximum profit at point v where last cluster of billboards has size i.
Then P(v,i) can be described using following formulas:
P(v,i) = P(v-1,i-1) + C(v) if i > 0
P(v,0) = max(P(v-1,i) for i = 0..min(k, v))
P(0,0) = 0
You need to find max(P(n,i) for i = 0..k)).
This problem is one of the challenges posted in www.interviewstreet.com ...
I'm happy to say I got this down recently, but not quite satisfied and wanted to see if there's a better method out there.
soulcheck's DP solution above is straightforward, but won't be able to solve this completely due to the fact that K can be as big as N, meaning the DP complexity will be O(NK) for both runtime and space.
Another solution is to do branch-and-bound, keeping track the best sum so far, and prune the recursion if at some level, that is, if currSumSoFar + SUM(a[currIndex..n)) <= bestSumSoFar ... then exit the function immediately, no point of processing further when the upper-bound won't beat best sum so far.
The branch-and-bound above got accepted by the tester for all but 2 test-cases.
Fortunately, I noticed that the 2 test-cases are using small K (in my case, K < 300), so the DP technique of O(NK) suffices.
soulcheck's (second) DP solution is correct in principle. There are two improvements you can make using these observations:
1) It is unnecessary to allocate the entire DP table. You only ever look at two rows at a time.
2) For each row (the v in P(v, i)), you are only interested in the i's which most increase the max value, which is one more than each i that held the max value in the previous row. Also, i = 1, otherwise you never consider blanks.
I coded it in c++ using DP in O(nlogk).
Idea is to maintain a multiset with next k values for a given position. This multiset will typically have k values in mid processing. Each time you move an element and push new one. Art is how to maintain this list to have the profit[i] + answer[i+2]. More details on set:
/*
* Observation 1: ith state depends on next k states i+2....i+2+k
* We maximize across this states added on them "accumulative" sum
*
* Let Say we have list of numbers of state i+1, that is list of {profit + state solution}, How to get states if ith solution
*
* Say we have following data k = 3
*
* Indices: 0 1 2 3 4
* Profits: 1 3 2 4 2
* Solution: ? ? 5 3 1
*
* Answer for [1] = max(3+3, 5+1, 9+0) = 9
*
* Indices: 0 1 2 3 4
* Profits: 1 3 2 4 2
* Solution: ? 9 5 3 1
*
* Let's find answer for [0], using set of [1].
*
* First, last entry should be removed. then we have (3+3, 5+1)
*
* Now we should add 1+5, but entries should be incremented with 1
* (1+5, 4+3, 6+1) -> then find max.
*
* Could we do it in other way but instead of processing list. Yes, we simply add 1 to all elements
*
* answer is same as: 1 + max(1-1+5, 3+3, 5+1)
*
*/
ll dp()
{
multiset<ll, greater<ll> > set;
mem[n-1] = profit[n-1];
ll sumSoFar = 0;
lpd(i, n-2, 0)
{
if(sz(set) == k)
set.erase(set.find(added[i+k]));
if(i+2 < n)
{
added[i] = mem[i+2] - sumSoFar;
set.insert(added[i]);
sumSoFar += profit[i];
}
if(n-i <= k)
mem[i] = profit[i] + mem[i+1];
else
mem[i] = max(mem[i+1], *set.begin()+sumSoFar);
}
return mem[0];
}
This looks like a linear programming problem. This problem would be linear, but for the requirement that no more than K adjacent billboards may remain.
See wikipedia for a general treatment: http://en.wikipedia.org/wiki/Linear_programming
Visit your university library to find a good textbook on the subject.
There are many, many libraries to assist with linear programming, so I suggest you do not attempt to code an algorithm from scratch. Here is a list relevant to Python: http://wiki.python.org/moin/NumericAndScientific/Libraries
Let P[i] (where i=1..n) be the maximum profit for billboards 1..i IF WE REMOVE billboard i. It is trivial to calculate the answer knowing all P[i]. The baseline algorithm for calculating P[i] is as follows:
for i=1,N
{
P[i]=-infinity;
for j = max(1,i-k-1)..i-1
{
P[i] = max( P[i], P[j] + C[j+1]+..+C[i-1] );
}
}
Now the idea that allows us to speed things up. Let's say we have two different valid configurations of billboards 1 through i only, let's call these configurations X1 and X2. If billboard i is removed in configuration X1 and profit(X1) >= profit(X2) then we should always prefer configuration X1 for billboards 1..i (by profit() I meant the profit from billboards 1..i only, regardless of configuration for i+1..n). This is as important as it is obvious.
We introduce a doubly-linked list of tuples {idx,d}: {{idx1,d1}, {idx2,d2}, ..., {idxN,dN}}.
p->idx is index of the last billboard removed. p->idx is increasing as we go through the list: p->idx < p->next->idx
p->d is the sum of elements (C[p->idx]+C[p->idx+1]+..+C[p->next->idx-1]) if p is not the last element in the list. Otherwise it is the sum of elements up to the current position minus one: (C[p->idx]+C[p->idx+1]+..+C[i-1]).
Here is the algorithm:
P[1] = 0;
list.AddToEnd( {idx=0, d=C[0]} );
// sum of elements starting from the index at top of the list
sum = C[0]; // C[list->begin()->idx]+C[list->begin()->idx+1]+...+C[i-1]
for i=2..N
{
if( i - list->begin()->idx > k + 1 ) // the head of the list is "too far"
{
sum = sum - list->begin()->d
list.RemoveNodeFromBeginning()
}
// At this point the list should containt at least the element
// added on the previous iteration. Calculating P[i].
P[i] = P[list.begin()->idx] + sum
// Updating list.end()->d and removing "unnecessary nodes"
// based on the criterion described above
list.end()->d = list.end()->d + C[i]
while(
(list is not empty) AND
(P[i] >= P[list.end()->idx] + list.end()->d - C[list.end()->idx]) )
{
if( list.size() > 1 )
{
list.end()->prev->d += list.end()->d
}
list.RemoveNodeFromEnd();
}
list.AddToEnd( {idx=i, d=C[i]} );
sum = sum + C[i]
}
//shivi..coding is adictive!!
#include<stdio.h>
long long int arr[100001];
long long int sum[100001];
long long int including[100001],excluding[100001];
long long int maxim(long long int a,long long int b)
{if(a>b) return a;return b;}
int main()
{
int N,K;
scanf("%d%d",&N,&K);
for(int i=0;i<N;++i)scanf("%lld",&arr[i]);
sum[0]=arr[0];
including[0]=sum[0];
excluding[0]=sum[0];
for(int i=1;i<K;++i)
{
sum[i]+=sum[i-1]+arr[i];
including[i]=sum[i];
excluding[i]=sum[i];
}
long long int maxi=0,temp=0;
for(int i=K;i<N;++i)
{
sum[i]+=sum[i-1]+arr[i];
for(int j=1;j<=K;++j)
{
temp=sum[i]-sum[i-j];
if(i-j-1>=0)
temp+=including[i-j-1];
if(temp>maxi)maxi=temp;
}
including[i]=maxi;
excluding[i]=including[i-1];
}
printf("%lld",maxim(including[N-1],excluding[N-1]));
}
//here is the code...passing all but 1 test case :) comment improvements...simple DP