I am trying to connect to a remote Git repository that resides on my web server and clone it to my machine.
I am using the following format for my command:
git clone ssh://username#domain.example/repository.git
This has worked fine for most of my team members. Usually after running this command Git will prompt for the user's password, and then run the cloning. However, when running on one of my machines I get the following error:
Host key verification failed.
fatal: Could not read from remote
repository.
We are not using SSH keys to connect to this repository, so I'm not sure why Git is checking for one on this particular machine.
As I answered previously in Cloning git repo causes error - Host key verification failed. fatal: The remote end hung up unexpectedly, add GitHub to the list of known hosts:
ssh-keyscan -t rsa github.com >> ~/.ssh/known_hosts
You are connecting via the SSH protocol, as indicated by the ssh:// prefix on your clone URL. Using SSH, every host has a key. Clients remember the host key associated with a particular address and refuse to connect if a host key appears to change. This prevents man in the middle attacks.
The host key for domain.example has changed. If this does not seem fishy to you, remove the old key from your local cache by editing ${HOME}/.ssh/known_hosts to remove the line for domain.example or letting an SSH utility do it for you with
ssh-keygen -R domain.example
From here, record the updated key either by doing it yourself with
ssh-keyscan -t rsa domain.example >> ~/.ssh/known_hosts
or, equivalently, let ssh do it for you next time you connect with git fetch, git pull, or git push (or even a plain ol’ ssh domain.example) by answering yes when prompted
The authenticity of host 'domain.example (a.b.c.d)' can't be established.
RSA key fingerprint is XX:XX:...:XX.
Are you sure you want to continue connecting (yes/no)?
The reason for this prompt is domain.example is no longer in your known_hosts after deleting it and presumably not in the system’s /etc/ssh/ssh_known_hosts, so ssh has no way to know whether the host on the other end of the connection is really domain.example. (If the wrong key is in /etc, someone with administrative privileges will have to update the system-wide file.)
I strongly encourage you to consider having users authenticate with keys as well. That way, ssh-agent can store key material for convenience (rather than everyone having to enter her password for each connection to the server), and passwords do not go over the network.
I had the similar issue, but, using SSH keys. From Tupy's answer, above, I figured out that the issue is with known_hosts file not being present or github.com not being present in the list of known hosts. Here are the steps I followed to resolve it -
mkdir -p ~/.ssh
ssh-keyscan -t rsa github.com >> ~/.ssh/known_hosts
ssh-keygen -t rsa -C "user.email"
open the public key with this command $ cat ~/.ssh/id_rsa.pub and copy it.
Add the id_rsa.pub key to SSH keys list on your GitHub profile.
This is happening because github is not currently in your known hosts.
You should be prompted to add github to your known hosts. If this hasn't happened, you can run ssh -T git#github.com to receive the prompt again.
For me, I just had to type "yes" at the prompt which asks "Are you sure you want to continue connecting (yes/no)?" rather than just pressing Enter.
If you are in office intranet (otherwise dangerous) which is always protected by firewalls simply have the following lines in your ~/.ssh/config.
Host *
StrictHostKeyChecking no
UserKnownHostsFile=/dev/null
When asked:
Are you sure you want to continue connecting (yes/no)?
Type yes as the response
That is how I solved my issue. But if you try to just hit the enter button, it won't work!
I got the same problem on a newly installed system, but this was a udev problem. There was no /dev/tty node, so I had to do:
mknod -m 666 /dev/tty c 5 0
What worked for me was to first add my SSH key of the new computer, I followed these instructions from GitLab - add SSH key. Note that since I'm on Win10, I had to do all these commands in Git Bash on Windows (it didn't work in regular DOS cmd Shell).
Then again in Git Bash, I had to do a git clone of the repo that I had problems with, and in my case I had to clone it to a different name since I already had it locally and didn't want to lose my commits. For example
git clone ssh://git#gitServerUrl/myRepo.git myRepo2
Then I got the prompt to add it to known hosts list, the question might be this one:
Are you sure you want to continue connecting (yes/no)?
I typed "yes" and it finally worked, you should typically get a message similar to this:
Warning: Permanently added '[your repo link]' (ECDSA) to the list of known hosts.
Note: if you are on Windows, make sure that you use Git Bash for all the commands, this did not work in regular cmd shell or powershell, I really had to do this in Git Bash.
Lastly I deleted the second clone repo (myRepo2 in the example) and went back to my first repo and I could finally do all the Git stuff like normal in my favorite editor VSCode.
When the remote server wants to connect to the private repo, it would authenticate via ssh.
Create the private-public key pair with ssh-keygen or if you already have the public-private key. copy&paste the public key in the Settings of the private repo.
YourPrivateRepo -> Settings -> Deploy Keys -> Add deploy key -> Paste the public key.
Now the remote server would be able to connect to the private repo.
NOTE: The deploy keys has access only for reading the repo. Need to explicitly allow write access.
If you are using git for Windows.
Open the git GUI.
Open the local git repository in git GUI.
Add the remote or push if the remote already exists.
Answer "yes" to the question about whether you want to continue.
The GUI client adds the key for you to ~/.ssh/known_hosts. This is easier to remember if you don't do it often and also avoids the need to use the git command line (the standard Windows command lines don't have the ssh-keyscan executable.
The solutions mentioned here are great, the only missing point is, what if your public and private key file names are different than the default ones?
Create a file called "config" under ~/.ssh and add the following contents
Host github.com
IdentityFile ~/.ssh/github_id_rsa
Replace github_id_rsa with your private key file.
I was facing the same error inside DockerFile during build time while the image was public. I did little modification in Dockerfile.
RUN git clone https://github.com/kacole2/express-node-mongo-skeleton.git /www/nodejs
This would be because using the git#github.com:... syntax ends up > using SSH to clone, and inside the container, your private key is not > available. You'll want to use RUN git clone > https://github.com/edenhill/librdkafka.git instead.
Check permissions on the known_hosts file as well - both the user's (~/.ssh/known_hosts) and the global one (/etc/ssh/ssh_known_hosts).
In my case the old host was in /etc/ssh/ssh_known_hosts. When I removed it as root with sudo ssh-keygen -f /etc/ssh/ssh_known_hosts -R THE_HOST it changed permissions on that file to 0600, so SSHing to THE_HOST as root worked, but for any other user it failed with "Host key verification failed". The fix was:
sudo chmod 644 /etc/ssh/ssh_known_hosts
One small addition to Tupy's answer, you may need to add the port number for your repository host:
ssh-keyscan -p 8888 -t rsa domain.example >> ~/.ssh/known_hosts
If you have another machine that does have remote access you can find the port number by viewing ~/.ssh/known_hosts:
[user]$ less ~/.ssh/known_hosts
[domain.example]:8888,[000.00.000.000]:8888 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCi...
Its means your remote host key was changed (May be host password change),
Your terminal suggested to execute this command as root user
$ ssh-keygen -f "/root/.ssh/known_hosts" -R [www.website.net]
You have to remove that host name from hosts list on your pc/server. Copy that suggested command and execute as a root user.
$ sudo su // Login as a root user
$ ssh-keygen -f "/root/.ssh/known_hosts" -R [www.website.net] // Terminal suggested command execute here
Host [www.website.net]:4231 found: line 16 type ECDSA
/root/.ssh/known_hosts updated.
Original contents retained as /root/.ssh/known_hosts.old
$ exit // Exist from root user
Try Again, Hope this works.
You kan use https instead of ssh for git clone or git pull or git push
ex:
git clone https://github.com/user/repo.git
Reason seems to be that the public key of the remote host is not stored or different from the stored one. (Be aware of security issues, see Greg Bacon's answer for details.)
I was used to git clone prompting me in this case:
The authenticity of host 'host.net (10.0.0.42)' can't be established.
ECDSA key fingerprint is 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00.
Are you sure you want to continue connecting (yes/no)?
Not sure, why this error is thrown instead. Could be the configuration of your shell or the git SSH command.
Anyhow, you can get the same prompt by running ssh user#host.net.
A other alternative worked for me, instead of cloning the SSH link
git#gitlab.company.net:upendra/mycode.git
there is a option to select http link
http://gitlab.company.net:8888/upendra/mycode.git
So I used http link to clone for Visual studio and it worked for me
If you are not using a Windows Session to update the code, and you use PortableGit, you need to set the HOMEPATH environment variable before running the git command.
This example fits better for other use case, but I think it is a good of proof-of-concept for this post.
$env:HOMEPATH="\Users\Administrator";C:\path\to\PortableGit\bin\git.exe -C C:\path\to\repository.git pull'
Pushing to Git returning Error Code 403 fatal: HTTP request failed
Check if there is Billing issue.
Google Cloud stops uploading files to https://source.cloud.google.com/
I got this problem went away after Payment issue was fixed.
But did not change the Keys.
Thanks
Dashboard > Manage Jenkins > Configure Global Security > Git Host Key Verification Configuration.
Then in Host Key Verification Strategy select Accept first connection.
You can use your "git url" in 'https" URL format in the Jenkinsfile or wherever you want.
git url: 'https://github.com/jglick/simple-maven-project-with-tests.git'
Alternatively, if you're using MSYS2 terminals (on Windows*) and a passphrase, it might be that the terminal does not prompt the 'Enter passphrase' properly, thus denying access to SSH.
If you're on Windows, you can instead use the Git Bash or Powershell to get the prompt and properly connect. (I'm currently looking for a solution for MSYS.)
*Not sure if relevant.
Problem:
Host key verification failed.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Solution: I've checked all the settings and also checked the key settings in GitHub. Finally, I changed the Git URL from "git#github.com:palvsv/travelo-moon.git" to "https://github.com/palvsv/travelo-moon.git" in .config file "yourprojectdirectory/.git/config" and it works.
for me, I just rename the "known_hosts" file to "known_hosts.del" for backup. and then rerun git clone xxx and type "yes". I will create new "known_hosts"
Just type 'yes' and press enter this should work
When the terminal shows:
Are you sure you want to continue connecting (yes/no)?
DO NOT I repeat DO NOT directly pressed Enter.
You MUST TYPE yes first in the terminal, then press Enter.
I had the similar issue, unfortunately I used the GitExtensions HMI and forgot that I wrote a passphrase.
With HMI.... forget it ! Do not enter passphrase when you generate your key !
I got this message when I tried to git clone a repo that was not mine. The fix was to fork and then clone.
What can I solve this problem?
when I wanted to connect my personal GitLab account, I got an error message like the following picture
### shell script
git clone git#gitlab.com:<username>/test1.git
GitLab server-side
Clone ssh address
PS: I have checked and found some reference from StackOverflow but unfortunately it isn't okay for me
1.git clone through ssh
2.SSH and Git Clone
3.git clone with ssh issue
I have found a great reference but sorry for Mandarin website, however, I can use my way to share how to deal with this issue.
Step 1:
ls -al ~/.ssh
Step 2:
ssh-keygen
(using enter key for default value)
Step 3: To setup config file
vim /c/Users/Willie/.ssh/config
Host gitlab.com
HostName gitlab.com
User git
IdentityFile ~/.ssh/id_rsa
Step 4:
git clone git#gitlab.com:<username>/test2.git
Step 5:
When you finished Step 4
1.the test2.git file will be download done
2.you will get the new file(known_hosts) in the ~/.ssh
PS: I create the id_rsa and id_rsa.ub by myself and I deliver it to the Gitlab server. using both keys to any client-sides(windows and Linux).
Check first if you do have a ~/.ssh/id_rsa private key/~/.ssh/id_rsa.pub public key.
If so, check your private key: if it has 70 chars per line, try and regenerate with the old PEM format:
ssh-keygen -m PEM -t rsa -P "" -f ~/.ssh/id_rsa
(That will override your current key, but if said current key is not working anyway, that should be OK).
Update the public key on GitLab side, and try again, with a simple:
ssh -T git#gitlab.com
Using a config file means not using the user and using a shorter name:
Host gitlab
HostName gitlab.com
User git
IdentityFile ~/.ssh/id_rsa
means: ssh -T gitlab or git clone gitlab:<username>/test2.git will work.
my machine setup is as follows:
windows 7, Git for windows,Git Bash, openSSH 1.6 installed via cygwin.
I followed the instructions on https://help.github.com/articles/generating-ssh-keys
But I still have to login in everytime I push something.
I guess my setup is messed up... any help is very much appreciated.
To be able to use key-based authentication (instead of HTTP basic-auth), you have to use the SSH-Protocol. On Github, the URLs look like this:
git#github.com:username/repository.git
Once you use key authentication, you can use the common SSH tools to manage the connections. One of these tools is the SSH agent which will decrypt your private key once after loading and keep it in main memory while it is running. This allows new SSH sessions to use this key without having to bother you with a password-question.
You can add a private key to the current SSH agent session by running
ssh-add /path/to/key
If you want to remove the passphrase and it annoys you then enter:
ssh-keygen -p
enter the old passphrase and when asks for the new one, just leave it empty.
I now got it working kinda...
At first I uninstalled the ssh package from cygwin since git for windows ships with ssh.
like Holger said I had to add the key to the ssh-agent but from the git bash I was not able to add it. It worked like this:
eval 'ssh-agen.exe'
ssh-add ~/.ssh/id_rsa
After this I was able to push without entering a passphrase.
The only problem got left is that I have to add the key after every system reboot...
ANy ideas how to fix this?
These instructions are for Windows 7 and above.
Create a filename named .bashrc in your home directory (so full file path is C:\Users\XYZ\.bashrc where XYZ is your windows user name
In the file add these two lines. Note: change location of private key file if not at ~/.ssh/id_rsa
eval `ssh-agent`
ssh-add ~/.ssh/id_rsa
Open Git Bash application and you should be prompted with asking for your key's password