I'm following this video tutorial (in spanish), which shows how to implement Jetstream with Bootstrap instead of Tailwinds: https://www.youtube.com/watch?v=Wt-OuBX6lEc&list=PLZ2ovOgdI-kWWS9aq8mfUDkJRfYib-SvF&index=31
The issue is this one: despite I've followed the steps strictly, I'm getting two important errors.
First of all, I should have a file named "app.css" into my folder "/public/css", but I don't. I don't have even a folder named 'css' into the 'public' directory, neither another lots of folders I should.
On the other hand, both my welcome view and my register view look ugly, like this:
The commands I've done are these ones:
Into:
leandro#leandro-Lenovo-B50-10:/var/www/html$
laravel new bootstrap --jet
cd bootstrap
Then,into:
leandro#leandro-Lenovo-B50-10:/var/www/html/bootstrap$
composer require nascent-africa/jetstrap --dev
php artisan jetstrap:swap livewire
npm install
npm run dev
php artisan migrate
sudo chmod -R 777 .
Also, the register view shows an error, unless I have activated VITE (with npm run dev).
Somewhere, I had to do a 'php artisan migrate:fresh', because a migration error.
I'm running the project into an Apache server.
I'm using:
Linux Mint 21 Vanessa
Apache/2.4.52 (Ubuntu)
PHP 8.2.1
Laravel v9.50.2
Does anyone have an idea of what's going wrong? It might be a conflict version, since I'm using Laravel 9, while the video is explained for Laravel 8.
I don't know if there's any additional information needed.
Thanks a lot!
the error is
#php artisan vendor:publish --tag=laravel-assets --ansi --force No
publishable resources for tag [laravel-assets].
This is not an error With the laravel.
With the relase of Laravel v8.5.23 they have added a command to post-update-cmd inside composer.json. So when ever if you run a composer update. Laravel will publishes the latest assests of the package that is created by them such as horizon and telescope.
So when they make changes in assests in above packages and tagged a release. You can use it by running the composer update command. But the changes made to vue files and styling will not be changed. You need to run the publish command manually. So to fix that they have added tags to those packages and whenever you run a composer update command it will automatically publishes the assets which are tagged as aravel-assets.
The reason you are getting No publishable resources for tag [laravel-assets]. message is either you haven't installed any of the package that uses the tag laravel-assets or may be not update in the assets.
You can view the PR's here
laravel/laravel/pull/5654
laravel/horizon/pull/1045
laravel/telescope/pull/1105
I installed a Laravel package via composer and require some of the non-published controllers of it to be published (to be safely modified by me and still being able to run composer install without overwriting custom code). However, I wouldn't find any appropriate answers on Google.
Basically, php artisan vendor:publish publishes some of the files of the package but not all. Is there a way to modify what files vendor:publish publishes? As stated, I'll need some controllers of the vendor folder to be published.
You can pass in the package's provider class and tags for what you want to publish
php artisan vendor:publish --provider="Namespace\ProviderClass" --tag="config|lang"
Try this out
php artisan vendor:publish --all
I tried to delete barryvdh/laravel-debugbar from my laravel installation, and it seems I didn't make something right.
What I did so far :
composer remove barryvdh/laravel-debugbar
I deleted then the references in config/app.php
And I've got an error :
[RuntimeException]
Error Output: PHP Fatal error:
Class 'Barryvdh\Debugbar\ServiceProvider' not found in
{mypath}\vendor\laravel\framework\src\Illuminate\Foundation\ProviderRepository.php on line 146
I tried dump-autoload, clear-compiled, but none works.
What did I miss ?
22/02/2016 Edit : I also tried to remove ALL the vendor folder, then install it again via composer install, but I got the error again when the command php artisan clear-compiled was run angain.
Ok, it seems I had played with artisan commands, and the configuration file was cached (via php artisan config:cache).
I deleted it (in bootstrap/cache/config.php) and everything works like a charm, but I also could have used the command php artisan config:clear to remove it.
When you installed Debugbar, after the package was install via composer you needed to add the class to the providers array in config/app.php. So you need to remove this line from there:
Barryvdh\Debugbar\ServiceProvider::class
If you also register the facade, then you need to remove the following from the aliases array from the same file:
'Debugbar' => Barryvdh\Debugbar\Facade::class
If you also ran php artisan vendor:publish (which is the final step described in the Installation Section from the package readme) then you can delete the config/debugbar.php file as well, although leaving that configuration file in place will not cause any issues.
Marc Brillault's answer is correct. I am adding more clarification to that answer:
I removed debug bar class manually from the catch files. present in (bootstrap/cache/config.php).
Steps for How to remove manually class.
1.) Open this two files
`bootstrap/cache/config.php`
`config/app.php`
2.) Find this two line and remove It.
Barryvdh\Debugbar\ServiceProvider::class,
'Debugbar' => Barryvdh\Debugbar\Facade::class,
3.) run command `php artisan config:clear`
after the following this step check command php artisan list is working well.
you must:
First. Delete the references to Debugbar in config/app.php
Second. composer remove barryvdh/laravel-debugbar
In that order. If you don't, Laravel get confused ;)
The best ways you need to do is delete all file manually in all composer files.
What is the correct way to remove a package from Laravel using PHP Composer?
So far I've tried:
Remove declaration from file composer.json (in the "require" section)
Remove any class aliases from file app.php
Remove any references to the package from my code :-)
Run composer update
Run composer dump-autoload
None of these options are working! What am I missing?
Composer 1.x and 2.x
Running the following command will remove the package from vendor (or wherever you install packages), composer.json and composer.lock. Change vendor/package appropriately.
composer remove vendor/package
Obviously you'll need to remove references to that package within your app.
I'm currently running the following version of Composer:
Composer version 1.0-dev (7b13507dd4d3b93578af7d83fbf8be0ca686f4b5) 2014-12-11 21:52:29
Documentation
https://getcomposer.org/doc/03-cli.md#remove
Updates
26/10/2020 - Updated answer to assert command works for v1.x and v2.x of Composer
I got it working... The steps to remove a package from Laravel are:
Remove the declaration from file composer.json (in the "require" section)
**Remove Service Provider from file config/app.php (reference in the "providers" array)
Remove any class aliases from file config/app.php
Remove any references to the package from your code :-)
Run composer update vendor/package-name. This will remove the package folder from the vendor folder and will rebuild the Composer autoloading map.
Manually delete the published files (read the comment by zwacky)
It will remove the package folder from the Vendor folder.
Normally composer remove used like this is enough:
composer remove vendor/package
But if a Composer package is removed and the "config" cache is not cleaned you cannot clean it. When you try like so
php artisan config:clear
you can get an error In ProviderRepository.php line 208:
Class 'Laracasts\Flash\FlashServiceProvider' not found
This is a dead end, unless you go deleting files:
rm bootstrap/cache/config.php
And this is Laravel 5.6 I'm talking about, not some kind of very old stuff.
It happens usually on automated deployment, when you copy files of a new release on top of old cache. Even if you cleared the cache before copying. You end up with an old cache and a new composer.json file.
You can remove any package just by typing the following command in the terminal, and just remove the providers and alias you provided at the time of installing the package, if any and update the composer,
composer remove vendor/your_package_name
composer update
Before removing a package from a composer.json declaration, please remove the cache:
php artisan cache:clear
php artisan config:clear
If you forget to remove the cache and you get a "class not found error" then please reinstall the package, clear the cache and remove again.
You can do any one of the below two methods:
Running the below command (most recommended way to remove your package without updating your other packages)
$ composer remove vendor/package
Go to your composer.json file and then run command like below it will remove your package (but it will also update your other packages)
$ composer update
If you are still getting the error after you are done with all the steps in the previous answers, go to your projects, Bootstrap → Cache → config.php. Remove the provider and aliases entries from the cached array manually.
Use:
composer remove vendor/package
This is an example:
Install or add a package
composer require firebear/importexportfree
Uninstall / remove
composer remove firebear/importexportfree
Finally after removing:
php -f bin/magento setup:upgrade
php bin/magento setup:static-content:deploy –f
php bin/magento indexer:reindex
php -f bin/magento cache:clean
Running
Composer remove package/name
Php artisan optimize
e.g "Composer remove mckenziearts/laravel-notify" works for me while using Laravel 8.
To add the packages, the command is to be like:
composer require spatie/laravel-permission
To remove the packages, the command is to be like:
composer remove spatie/laravel-permission
In case the given answers still don't help you remove that, try this:
Manually delete the line in require from composer.json
Run composer update
If this doesn't work "composer remove package/name", you can still remove it manually.
Note : package/name is like spatie etc.
Go to composer.json and find the package name
Delete package name from composer.json
Find the vendor file in your Laravel project.
Delete the package file which is under vendor
run composer install on your terminal
Note : Package File mean is that package that you are looking for. For example, you want to remove Spatie. Then you need to find that with similar name in vendor file and you need to delete it manually.
Your package was removed successfully.
We have come with a great solution. This solution is practically done in Laravel 6. If you want to remove any package from your Laravel Project then you can easily remove the package by following below steps:
Step 1: You must know the package name which you want to remove. If you don't know the complete package name then you can open your project folder and go to the composer.json file and check the name in the require array:
"require": {
"php": "^7.2",
"fideloper/proxy": "^4.0",
"laravel/framework": "^6.2",
"laravel/passport": "^8.3",
"laravel/tinker": "^2.0"
},
Suppose, here I am going to remove the "fideloper/proxy" package.
Step 2: Open a command prompt with your project root folder directory
Step 3: First of all, clear all cache by the following commands. Run the commands one by one.
php artisan cache:clear
php artisan config:clear
Step 4: Now write the following command to remove the package. Here you need to change your package name instead of my example package.
composer remove fideloper/proxy
Now, wait for a few seconds while your package is removed.
On Laravel 8.*, the following steps work for me:
Run command composer remove package-name on the terminal
Remove Provider and aliases from file Config/app.php
Remove the related file from the Config folder.
Remove it from your code where you used it.
Remove the package folder from the vendor folder (manual delete)
Remove it from file composer.json and 'composer.lock' files (use Ctrl + F5 to search)
Remove it from file config/app.php and file bootstrap/cache/config.php files
Run these commands:
composer remove **your-package-name**
php artisan cache:clear
php artisan config:clear
There are quite a few steps here:
Go to file composer.json and look for the package and how it is written over there.
for example
{ "require": {
"twig/twig": "^3.0" } }
I wish to remove twig 3.0
Now open cmd and run composer remove vendor/your_package_name as composer remove twig/twig will remove the package.
As a final step, run composer update. This will surely give you a massage of nothing to install or update, but this is important in case your packages have inter-dependencies.
You have two solution.
First
Use remove of composer.
composer remove *your_package_name*
Second
Delete the line in require from composer.json and then run update
composer update
After removed, recommend to run below two command.
php artisan cache:clear
php artisan config:clear