I have a web api which is deployed on IIS.
Api's are going through load test using load runner and almost on all alternative api call, getting 403 error response code, struggling to identify the issue, call is not going to the API, its returned back from IIS
I am doing bearer token authorization, somehow token which were incoming with each request were not valid, that is why the issue was occurring, to overcome this we have increased the lifetime of token to 1 hour and request load test team to generate the token once and send that token only with each request so that we can now see the proper execution time for each end point.
403 error indicates that access to the requested URL by the client is Forbidden for some reason. you need to provide detailed error message snapshot and what is the sub status code. and check that you assign this permission to the site folder:1) IIS_IUSRS,2)NETWORK SERVICE,3)IUSR
This question already has an answer here:
Which HTTP status code to say username or password were incorrect?
(1 answer)
Closed 5 years ago.
I am implementing an endpoint which offer some secret data and I want to make a simple verify mechanism. Which status should I response when user does not have the correct crediential?
400? 403? Or something else?
thanks.
You should use 403, HTTP status code 403 responses are the result of the web server being configured to deny access to the requested resource by the client.
See HTTP 403
You can use 401 if you intend to authenticate via www-authenticate header field. If the authentication information was incorrect or missing send 401.
Or use 403 to notify the sender of the request that he is not allowed to access the requestet content. According to the documentation the response should state the reason why the request was refused.
If you do not with to do so you could alternatively send a 404.
For further information see the linked Documentation.
w3.org http Protocol
EDIT: improved from link only answer.
A similar question is posted here: What's an appropriate HTTP status code to return by a REST API service for a validation failure?
The answer in the thread above states that "For instance if the URI is supposed to have an ISO-8601 date and you find that it's in the wrong format or refers to February 31st, then you would return an HTTP 400. Ditto if you expect well-formed XML in an entity body and it fails to parse."
However, what happens if the user submitted correctly formatted data? By this I mean, the user submitted a plain alphabetical string / text for the username and password (which is perfectly valid for my application). The only issue is that the password did not match with the username. In this case, 400 will be incorrect because it is perfectly valid syntax and well-formed.
A 401 would be incorrect (as suggested here: Which HTTP status code to say username or password were incorrect?) because the user is not trying to access any page, he is simply trying to login and entered data which does not match.
If you look back at the first post I linked to, the second answer states that 422 is the correct response (and it looks correct to me), however, I am using Django Rest Framework and 422 is not part of the status codes (a list of the status codes which are part of DRF can be found here: http://www.django-rest-framework.org/api-guide/status-codes/#client-error-4xx)
404 also doesn't look right because the data is successfully accepted and not refused.
With that said, what is the real correct response which should be used?
If you are strictly using the HTTP authentication framework provided by RFC 7235 for your REST API, the correct HTTP code would actually be 401. From the RFC:
The 401 (Unauthorized) status code indicates that the request has not been applied because it lacks valid authentication credentials for the target resource. The server generating a 401 response MUST send a WWW-Authenticate header field (Section 4.1) containing at least one challenge applicable to the target resource.
If the request included authentication credentials, then the 401 response indicates that authorization has been refused for those credentials. The user agent MAY repeat the request with a new or replaced Authorization header field (Section 4.2).
Your REST API should employ an authentication scheme of some sort in order to return a valid 401 response to your client.
Another pertinent section from RFC 7235, page 4:
Upon receipt of a request for a protected resource that omits
credentials, contains invalid credentials (e.g., a bad password) or
partial credentials (e.g., when the authentication scheme requires
more than one round trip), an origin server SHOULD send a 401
(Unauthorized) response that contains a WWW-Authenticate header field
with at least one (possibly new) challenge applicable to the
requested resource.
A higher-level response, such as a rendered login page for a visual user (redirected from a protected resource via 302), would be better served with the 200 status code (per #KernelDeimos' answer, for example). Since login pages are typically their own resource (e.g. /login?redirect=original-resource), the unauthenticated user is still authorized to see this page, even if they provide an incorrect username/password. Then, you redirect the authenticated user back to the resource, at which point would show 200 if allowed, or 403 if the user is forbidden to view the resource.
The area where 401 could come into play with a visual login page is a front-end library that leverages the REST API using XHR requests, then relay the 401 response from the REST API back into a meaningful format on the login page.
If login is handled at a higher-level (ex: sending a POST to the server with a username and password), use the appropriate status code in 2xx for a successfully handled login request with the wrong password. If using the HTTP authentication framework provided by RFC 7235, send 401 (see answer by #sjagr for further detail).
Below the line is the rest of my original answer, which explains my train of thought. Also note the thread on sjagr's answer which includes a debate which improved both our answers and a comment from Julian Reschke (one of the RFC's authors).
Before asking "what is the correct HTTP status code", it's important to consider this question: "Should success or failure of login be reflected in the HTTP status code of the response?"
In #sjagr's answer the first part of this section is highlighted. I'm going to highlight the second part and explain why:
If the request included authentication credentials, then the 401 response indicates that authorization has been refused for those credentials. The user agent MAY repeat the request with a new or replaced Authorization header field (Section 4.2).
This refers to an Authorization header, rather than a request body containing login credentials. The phrasing of the first part, unfortunately, could be misinterpreted to refer to a request body containing login information. This ambiguity can be resolved by considering separation of concerns; (https://en.wikipedia.org/wiki/Separation_of_concerns) the server's response header should not depend on the differences of two valid request bodies, with the exception of when it causes an internal server error, otherwise the concerns of data transfer and appliction login begin to creep into each other.
I would use HTTP response 2xx for a valid login request, where the client has permission to attempt a login, that is handled successfully with a response indicating success or failure.
I also like the way #spectras expressed this in the comments:
Attempting to express an application-level error in a transport-level status code is a design mistake.
401 - Unauthorized
403 - Forbidden
http://www.buggybread.com/2012/11/http-error-codes-401-access-denied-403.html
If you try to log into a Google account with the wrong password, it will return a 200 response containing data that indicates the password was incorrect. For that reason, I just use a 200.
At the end of the day, which status code you use is purely a semantic issue and isn't going to change the functionality of your application. What really matters is that your application displays the correct information to the user.
I think what causes all the confusion is that there are two entities that need to be authenticated. One is the client (front-end app) needs to authenticate itself, that its authorized to make a login request for the user, and then the user needs to authenticate itself with his username/password.
The status code should only be related to the client making the request, not the user.
From https://developer.mozilla.org/en-US/docs/Web/HTTP/Status
HTTP response status codes indicate whether a specific HTTP request has been successfully completed.
200 is correct:
Given that you have a front-end application that talks to the backend, the appropriate respond code should be 200 and the response body should contain the information if password matches or not, but that result has no impact on the status code, because the request itself was authorized and successfully parsed.
401 is wrong:
Assume your front-end authenticates with a token for example, then the response code 401 would mean the front-end token is invalid, not the password of the user inside that request.
403 is wrong: Assume your front-end authenticates with a token for example, then the response code 403 would mean the token is vaild, but that token does not have the access right to ask if password/username match.
I have a web app that uses form based authentication. When an AJAX request fails due to session timeout, I need to send an appropriate notification. It looks like I could send:
403 Forbidden, but that implies "authorization will not help", which is false.
401 Unauthorized, but responses "MUST include a WWW-Authenticate header field" and the information on what exactly the value should be when using form based authentication is limited.
When an AJAX request fails because the user is not authenticated, what then is the appropriate response?
I tend to interpret 403 as "HTTP authorization will not help", and use it instead of 401 when not using HTTP authentication.
How oData or AJAX services should respond when the authentication cookie is expired and it's time to renew?
What should the server send to the client when
An oData or AJAX service access is forbidden (access denied)
When the session credentials are stale, and need to be renewed, perhaps by redirecting to an ADFS, OpenID, or Azure ACS IDP
Just looking in Wikipedia lets me guess that I should send some version of 403.x for the first scenario, and a 401 for the second scenario.
Please confirm if the above is correct, and what I should include in the response header and body as well.
Some examples I assume to be incorrect do the following:
Silently error out the AJAX service and return no data
Attempt to redirect the AJAX call to the IDP
Send error text to the client that is not in JSON format
its always safe to play with the HTTP Status codes instead of cooking up your own tokens or anything of that sort.
Since the fundamentals of OData is to make it possible for any client which knows how to communicate HTTP, it makes sense to play around the HTTP status code. The clients will decide what to do on a particular status code.
HTTP Status Codes are the way to go. OData specifically doesn't define anything that is already implemented at a lower level (such as security and authentication.)
401 is for Unauthenticated, 403 is for Unauthorized. For secnario 1 you only say "Access denied" but not why you're denying access. Is the user not authenticated? Then return 401. Is the user authenticated but lacking privileges? Then return 403.
For scenario 2, I would agree, return a detailed 401 status (i.e. with a valid "WWW-Authenticate" header for your authentication provider.)
The Wikipedia article I recommend starting at (you may have already found this) is: https://secure.wikimedia.org/wikipedia/en/wiki/List_of_HTTP_status_codes
Hope this helps someone. :-)