I was trying to use Codeblocks IDE 20.03 in Windows XP when I saw this error message:
The procedure entry point _o__configure_narrow_argv could not be located in the dynamic link library api-ms-win-crt-private-|l1-1-0.dll.
Is there a fix for this issue?
I am using Windows XP Service Pack 3 Build 2600.
Codeblocks IDE 20.03 works in Windows XP 32 Bit without complaining after the following changes,
Download and install Visual C++ Redistributable for Visual Studio 2015
Download all the 6 files from sourceforge.net
Extract the files from the downloaded codeblocks-code-r11196-trunk-src-exchndl-win32-bin.zip
Copy the files (addr2line.exe, dbghelp.dll, exchndl.dll, mgwhelp.dll, symsrv.dll, symsrv.yes) and replace them in the installation directory where codeblocks.exe is located. (Normally, C:\Program Files\CodeBlocks)
Related
I have a problem when trying to install apache 2.4 on my windows 10. It always shows the error that VCRUNTIME140.dll is missing. I have checked other threads and found out that installing the 2015 Visual c++ Redistributables x64/x86 always solves the problem but I have both installed and I still have this problem. Are there any other solutions?
You need to install Microsoft Visual C++ 2015 Redistributable Update 3 RC, please find the link here, choose between the 32bit or the 64bit.
Reinstall the apache 2.4 and error should gone.
I had the same issue after installing wamp on windows 10.This worked for me.
Download VCRUNTIME140.DLL
Copy the dll file to C:\Windows\System32 using administrative privileges.
Try reinstalling apache.
Download and install the proper version of Microsoft Visual C++ 2015 Redistributable Update 3 RC regarding your hardware architecture (x86 / x64). Use the link below:
Microsoft Visual C++ 2015 Redistributable Update 3 RC
On Windows 6 X64, got an error 500 on any PHP files,
installing the 2015 Visual c++ Redistributables x64 solved my problem.
I'v already had VC 2015 Redist on my PC but files were not copied into Windows\System32.
So I copied missing files directly to this folder. A thing that I should mention is since I compiled my application in X86 mode I copied them from
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\redist\x86
not
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\redist\x64
I know that this solution is not the ideal one, but it was a workaround for my case.
If you are using Microsoft Visual C/C++ and you have already downloaded VCRUNTIME140.DLL, Go to Project Properties->Configuration Properties-> C/C++ -> Code Generation, Set Runtime Library Multi-threaded (/MT)
Remove apache 2.4 from your pc
Download VCRUNTIME140.dll from this link
Copy VCRUNTIME140.dll file and paste it inside to Windows/System32
Finally reinstall apache and run
I am trying to build a WebRTC library. It has a bunch of build python scripts one of which is trying to access
C:\Program Files (x86)\Windows Kits\10\Redist\ucrt\DLLs\x64
And copy ucrt Dlls into build directory.It fails there because my Redist directory doesn't have ucrt folder. I tried to uninstall my Windows SDK 10 and reinstall it.But Redist is still empty. Based on this doc by Microsoft:
To obtain the binaries for app-local deployment, install the Windows
Software Development Kit (SDK) for Windows 10. The binaries will be
installed to C:\Program Files (x86)\Windows Kits\10\Redist\ucrt.
But it simply doesn't happen.I also tried to reinstall all the Windows tools and SDK via my VS2015 (Community) installer.
Did Microsoft deprecate the redistributable part of the installation?
How can I solve this?
I installed Windows SDK 10.0.16299.0 . My system is Windows 10 64bit.
It happened to me. Both the visual studio installer and the standalone install incomplete/corrupt versions of the sdk.
Solution: Install the sdk in a windows VM (you can use the Microsoft provided vm: https://developer.microsoft.com/en-us/microsoft-edge/tools/vms/) and install the SDK there, then copy the complete folder (named 10 in my case) to the appropriate route. In Windows 10 would be: *C:\Program Files (x86)\Windows Kits*
(Commenting 4 year later because I came here looking for the same answer :) )
I have a problem when trying to install apache 2.4 on my windows 10. It always shows the error that VCRUNTIME140.dll is missing. I have checked other threads and found out that installing the 2015 Visual c++ Redistributables x64/x86 always solves the problem but I have both installed and I still have this problem. Are there any other solutions?
You need to install Microsoft Visual C++ 2015 Redistributable Update 3 RC, please find the link here, choose between the 32bit or the 64bit.
Reinstall the apache 2.4 and error should gone.
I had the same issue after installing wamp on windows 10.This worked for me.
Download VCRUNTIME140.DLL
Copy the dll file to C:\Windows\System32 using administrative privileges.
Try reinstalling apache.
Download and install the proper version of Microsoft Visual C++ 2015 Redistributable Update 3 RC regarding your hardware architecture (x86 / x64). Use the link below:
Microsoft Visual C++ 2015 Redistributable Update 3 RC
On Windows 6 X64, got an error 500 on any PHP files,
installing the 2015 Visual c++ Redistributables x64 solved my problem.
I'v already had VC 2015 Redist on my PC but files were not copied into Windows\System32.
So I copied missing files directly to this folder. A thing that I should mention is since I compiled my application in X86 mode I copied them from
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\redist\x86
not
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\redist\x64
I know that this solution is not the ideal one, but it was a workaround for my case.
If you are using Microsoft Visual C/C++ and you have already downloaded VCRUNTIME140.DLL, Go to Project Properties->Configuration Properties-> C/C++ -> Code Generation, Set Runtime Library Multi-threaded (/MT)
Remove apache 2.4 from your pc
Download VCRUNTIME140.dll from this link
Copy VCRUNTIME140.dll file and paste it inside to Windows/System32
Finally reinstall apache and run
I've got VSTO project for Outlook, developed in VS 2012.
When I install it under Windows XP, where Visual Studio 2010 or later version is installed, I've got no problems.
When I install it by clicking .vsto file under Windows XP where no Visual Studio is installed, VSTOInstaller.exe fails with 0x8007007F error.
When I install it from command line (in fact it's the same)
"c:\Program Files\Common Files\Microsoft Shared\VSTO\10.0\VSTOInstaller.exe" /install file://.../OutlookAddIn.vsto
I get
The procedure entry point GetFileVersionInfoExW could not be located in the dynamic link library VERSION.dll
Windows installer 4.5, VSTO 2010 runtime are installed on the problem machine.
How to fix it?
Thanks.
Finally I suppose VSTO 2010 runtime downloaded from https://www.microsoft.com/en-us/download/details.aspx?id=48217 has a bug in VSTOInstaller.exe (version 10.0.60724.0).
Uninstalling it and reinsalling older version from distributive of VS 2015/2012/2010 (find file vstor40_x86.exe or vstor40_x64.exe) fixes the problem.
VSTOInstaller.exe from VS 2015 has version 10.0.50903.0 - it is OK.
I have an InstallShield project (InstallShield 2011 Limited Edition) for Visual Studio 2010. The project is created on a machine running Windows XP (32-bit). It builds an installation package for a C# solution targeted to .NET 4.0 Full profile. However, the same project configuration fails to build installation packages on windows 7. It turns out that the installation of InstallShield itself is different in Windows 7 compared to Windows XP.
When building the installation package on WIndows 7, I get several errors like the following:
ISEXP : error : -1007: Cannot copy source 'C:\Program Files\InstallShield\2011LE\SetupPrerequisites\Windows Installer\3.1\x86\WindowsInstaller-KB893803-v2-x86.exe' to target ...
On Windows XP, there are 3 subdirectory structures in C:\Program Files\InstallShield\2011LE\SetupPrerequisites:
Windows Installer
3.1
Microsoft .net
4.0
WindowsImagingComponent
x64
x86
These directories and there files are missing after installation of InstallShield on Windows 7.
If I add the files manually, the Windows 7 machine can build the InstallShield project without problem.
Is this a bug in InstallShield or have I missed some features? I would like to be able to build installation packages both on Windows 7 and Windows XP without having to patch the InstallShield installation itself.
Typically you right click | download the files from the redist screen. Only the .PRQ (XML) files are in the InstallShield installer. The rest are pulled down once as you need them.