This question already has answers here:
While loop stops reading after the first line in Bash
(5 answers)
Pass commands as input to another command (su, ssh, sh, etc)
(3 answers)
Closed 2 years ago.
I know there are other solution such as expect, or Python paramiko, but bash shell is the only option available for now.
Out of these 3 IPs, only 172.16.1.2 has SSH server installed and they have similar password.
wolf#linux:~$ cat ip.txt
172.16.1.1
172.16.1.2
172.16.1.3
wolf#linux:~$
This is the Bash script
wolf#linux:~$ cat sshSession.sh
while read host
do
export SSH_ASKPASS='~/ePass'
setsid ssh -T user#$host
if [ $? = 0 ]; then
exit
echo "$host | SSH Authentication OK"
else
echo "$host | SSH Authentication PROBLEM"
fi
done < ip.txt
wolf#linux:~$
Output
wolf#linux:~$ ./sshSession.sh
ssh: connect to host 172.16.1.1 port 22: No route to host
172.16.1.1 | SSH Authentication PROBLEM
Welcome to Ubuntu Server
* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com
* Support: https://ubuntu.com/advantage
-bash: line 1: 172.16.1.3: command not found
172.16.1.2 | SSH Authentication PROBLEM
wolf#linux:~$
There are a few problems here.
I just want to get the authentication status only, not to log in into the server.
There is something wrong with the output -bash: line 1: 172.16.1.3: command not found
172.16.1.2 | SSH Authentication PROBLEM - This is the only host installed with SSH, while others not.
Desired Output
wolf#linux:~$ ./sshSession.sh
172.16.1.1 | SSH Authentication PROBLEM
172.16.1.2 | SSH Authentication OK
172.16.1.3 | SSH Authentication PROBLEM
What's wrong in the script and how to fix it?
You seem to be assuming that the exit gets written into the ssh session, but that's not how it works. You execute exit after the ssh process terminates. See Pass commands as input to another command (su, ssh, sh, etc)
Also, you seem to be passing standard input from your while loop into the running ssh instance. See Shell script while read line loop stops after the first line
Also, Why is testing "$?" to see if a command succeeded or not, an anti-pattern?
Also, use read -r as a general principle (though I guess it doesn't really matter here). And don't repeatedly set SSH_ASKPASS to the same value. (And generally don't export a variable more than once; it's harmless but usually reveals more than you like about your understanding of what export actually does.) And, quote your variables.
export SSH_ASKPASS='~/ePass'
while read -r host
do
if setsid ssh -T -n user#"$host" true; then
echo "$host | SSH Authentication OK"
else
echo "$host | SSH Authentication PROBLEM"
fi
done < ip.txt
Related
This question already has answers here:
Pass commands as input to another command (su, ssh, sh, etc)
(3 answers)
Script fails with spaces in directory names
(1 answer)
Closed 2 years ago.
I would like to make a bash script where I read a list of IP addresses and run the following command:
smbclient \\\\ $ ip \\ ipc $ -U ". \ User" --pw-nt-hash
which does an exit and try with another IP, regardless of that it throws a message if the connection was successful, it does not execute with the IPs that are inside the list, it only tries with the first one in the list.
#/bin/bash
IPLIST="ip"
for ip in $(cat ip)
do
smbclient \\\\$ip\\C$ -U ".\user" --pw-nt-hash "user"
exit
done
If you don't want the script to exit after the first smbclient, drop the exit command.
smbclient \ $ ip \ ipc $ -U ". \ User" --pw-nt-hash, which does an exit
This exit is not done by smbclient, but rather by the script; therefore it ends.
You seem to assume that the exit gets passed as input to smbclient, but that's not how this works. You run smbclient and when it finishes, your script continues, and executes the exit. See Pass commands as input to another command (su, ssh, sh, etc) for a fuller discussion.
Also, don't read lines with for.
#/bin/bash
while read -r ip; do
smbclient \\\\$ip\\C$ -U ".\user" --pw-nt-hash "user" <<<exit
done <ip
This question already has answers here:
What is the cleanest way to ssh and run multiple commands in Bash?
(14 answers)
Shell script: Run function from script over ssh
(3 answers)
Execute bash command stored in associative array over SSH, store result
(2 answers)
Closed 3 years ago.
I want to run a script that checks if the specific folder exists on a remote server then greps a specific line from a specific file in that server to the local machine.
if ssh -t -t user#server [ -d /etc/nginx ]; then
ssh -t -t user#server
ls -1a /etc/nginx/conf.d | grep $1 | xargs cat | grep specific_line | grep .specific-extension | awk '{print $2}'
fi
I use awk '{print $2}' to print out the second line of the grepd line
SO I want this to be an output in my local machine or even better I want to put that in a variable in the script.
I haven't find anything on the internet that solves even the simplified version of this.
I have PSK enabled on the servers so I don't have to enter the password when I ssh.
I just did something similar using paramiko in Python. I test the sudo privileges of many accounts over hundreds of IPs in a few minutes. You can run the command and get stdin, stdout, and stderr. That should get you started in the right direction 😉
You can use logins and certs with it too if that helps.
I got this trick from Solaris documentation, for copying ssh public keys to remote hosts.
note: ssh-copy-id isn't available on Solaris
$ cat some_data_file | ssh user#host "cat >/tmp/some_data_file; some_shell_cmd"
I wanted to adapt it to do more involved things.
Specifically I wanted some_shell_command to be a script sent from the local host to execute on the remote host... a script would interact with the local keyboard (e.g. prompt user when the script was running on the remote host).
I experimented with ways of sending multiple things over stdin from multiple sources. But certain things that work in in local shell don't work over ssh, and some things, such as the following, didn't do what I wanted at all:
$ echo "abc" | cat <(echo "def") # echoes: def (I wanted abc\ndef)
$ echo "abc" | cat < <(echo "def") # echoes: def (I wanted abc\ndef)
$ echo "abc" | cat <<-EOF
> echo $(</dev/stdin) #echoes: echo abc (I wanted: abc)
> EOF
# messed with eval for the above but that was a problem too.
#chepner concluded it's not feasible to do all of that in a single ssh command. He suggested a theoretical alternative that didn't work as hoped, but I got it working after some research and tweaking and documented the results of that and posted it as an answer to this question.
Without that solution, having to run multiple ssh, and scp commands by default entails being prompted for password multiple times, which is a major drag.
I can't expect all the users of a script I write in a multi-user environment to configure public key authorization, nor expect they will put up with having to enter a password over and over.
OpenSSH Session Multiplexing
    This solution works even when using earlier versions of OpenSSH where the
   ControlPersistoption isn't available. (Working bash example at end of this answer)
Note: OpenSSH 3.9 introduced Session Multiplexing over a "control master connection" (in 2005), However, the ControlPersist option wasn't introduced until OpenSSH 5.6 (released in 2010).
ssh session multiplexing allows a script to authenticate once and do multiple ssh transactions over the authenticated connection. For example, if you have a script that runs several distinct tasks using ssh, scp, or sftp, each transaction can be carried out over OpenSSH 'control master session' that refers to location of its named-socket in the filesystem.
The following one-time-password authentication is useful when running a script that has to perform multiple ssh operations and one wants to avoid users having to password authenticate more than once, and is especially useful in cases where public key authentication isn't viable - e.g. not permitted, or at least not configured.
Most solutions I've seen entail using ControlPersist to tell ssh to keep the control master connection open, either indefinitely, or for some specific number of seconds.
Unfortunately, systems with OpenSSH prior to 5.6 don't have that option (wherein upgrading them might not be feasible). Unfortunately, there doesn't seem to be much documentation or discussion about that limitation online.
Reading through old release docs I discovered ControlPersist arrived late in the game for ssh session multiplexing scene. implying there may have been an alternative way to configure session multiplexing without relying on the ControlPersist option prior to it.
Initially trying to configure persistent-sessions from command line options rather than the config parameter, I ran into the problem of the ssh session terminating prematurely, closing control connection client sessions with it, or, alternatively, the connection was held open (kept ssh control master alive), terminal I/O was blocked, and the script would hang.
The following clarifies how to accomplish it.
OpenSSH option ssh flag Purpose
------------------- --------- -----------------------------
-o ControlMaster=yes -M Establishes sharable connection
-o ControlPath=path -S path Specifies path of connection's named socket
-o ControlPersist=600 Keep shareable connection open 10 min.
-o ControlPersist=yes Keep shareable connection open indefinitely
-N Don't create shell or run a command
-f Go into background after authenticating
-O exit Closes persistent connection
ControlPersist form Equivalent Purpose
------------------- ---------------- -------------------------
-o ControlPersist=yes ssh -Nf Keep control connection open indefinitely
-o ControlPersist=300 ssh -f sleep 300 Keep control connection open 5 min.
Note: scp and sftp implement -S flag differently, and -M flag not at all, so, for those commands, the -o option form is always required.
Sketchy Overview of Operations:
Note: This incomplete example doesn't execute as shown.
ctl=<path to dir to store named socket>
ssh -fNMS $ctl user#host # open control master connection
ssh -S $ctl … # example of ssh over connection
scp -o ControlPath=$ctl … # example of scp over connection
sftp -o ControlPath=$ctl … # example of sftp over connection
ssh -S $ctl -O exit # close control master connection
Session Multiplexing Demo
(Try it. You'll like it. Working example - authenticates only once):
Running this script will probably help you understand it quicker than reading it, and it is fascinating.
Note: If you lack access to remote host, just enter localhost at the "Host...?" prompt if you want to try this demo script
#!/bin/bash # This script demonstrates ssh session multiplexing
trap "[ -z "$ctl" ] || ssh -S $ctl -O exit $user#$host" EXIT # closes conn, deletes fifo
read -p "Host to connect to? " host
read -p "User to login with? " user
BOLD="\n$(tput bold)"; NORMAL="$(tput sgr0)"
echo -e "${BOLD}Create authenticated persistent control master connection:${NORMAL}"
sshfifos=~/.ssh/controlmasters
[ -d $sshfifos ] || mkdir -p $sshfifos; chmod 755 $sshfifos
ctl=$sshfifos/$user#$host:22 # ssh stores named socket ctrl conn here
ssh -fNMS $ctl $user#$host # Control Master: Prompts passwd then persists in background
lcldir=$(mktemp -d /tmp/XXXX)
echo -e "\nLocal dir: $lcldir"
rmtdir=$(ssh -S $ctl $user#$host "mktemp -d /tmp/XXXX")
echo "Remote dir: $rmtdir"
echo -e "${BOLD}Copy self to remote with scp:${NORMAL}"
scp -o ControlPath=$ctl ${BASH_SOURCE[0]} $user#$host:$rmtdir
echo -e "${BOLD}Display 4 lines of remote script, with ssh:${NORMAL}"
echo "====================================================================="
echo $rmtdir | ssh -S $ctl $user#$host "dir=$(</dev/stdin); head -4 \$dir/*"
echo "====================================================================="
echo -e "${BOLD}Do some pointless things with sftp:${NORMAL}"
sftp -o ControlPath=$ctl $user#$host:$rmtdir <<EOF
pwd
ls
lcd $lcldir
get *
quit
EOF
Using a master control socket, you can use multiple processes without having to authenticate more than once. This is just a simple example; see man ssh_config under ControlPath for advice on using a more secure socket.
It's not quite clear what you mean by sourcing somecommand locally; I'm going to assume it is a local script that you want copied over to the remote host. The simplest thing to do is just copy it over to run it.
# Copy the first file, and tell ssh to keep the connection open
# in the background after scp completes
$ scp -o ControlMaster=yes -o ControlPersist=yes -o ControlPath=%C somefile user#host:/tmp/somefile
# Copy the script on the same connection
$ scp -o ControlPath=%C somecommand user#host:
# Run the script on the same connection
$ ssh -o ControlPath=%C user#host somecommand
# Close the connection
$ ssh -o ControlPath=%C -O exit user#host
Of course, the user could use public key authentication to avoid entering their credentials at all, but ssh would still go through the authentication process each time. Here, the authentication process is only done once, by the command using ControlMaster=yes. The other two processes reuse that connection. The last commmand, with -O exit, doesn't actually connect; it just tells the local connection to close itself.
$ echo "abc" | cat <(echo "def")
The expression <(echo "def") expands to a file name, typically something like /dev/fd/63, that names a (virtual) file containing the text "def". So lets's simplify it a bit:
$ echo "def" > def.txt
$ echo "abc" | cat def.txt
This will also prints just def.
The pipe does feed the line abc to the standard input of the cat command. But because cat is given a file name on its command line, it doesn't read from its standard input. The abc is just quietly ignored, and the cat command prints the contents of the named file -- which is exactly what you told it to do.
The problem with echo abc | cat <(echo def) is that the <() wins the "providing the input" race. Luckily, bash will allow you to supply many inputs using mulitple <() constructs. So the trick is, how do you get the output of your echo abc into the <()?
How about:
$ echo abc | cat <(echo def) <(cat)
def
abc
If you need to handle the input from the pipe first, just switch the order:
$ echo abc | cat <(cat) <(echo def)
abc
def
I Want to exit ssh:
How does the below line work:
ssh -f -T ${USAGE_2_USER}#${USAGE_2_HOST}
Or do i need to write it some other way . Please tell should I use exit with ssh an how?
I am using ssh in my script .
I want to exit from it after the execution of it, with out showing them up in the proccess.
Your question is very vauge, so I will answer it based on what you asked.
ssh -f -T ${USAGE_2_USER}#${USAGE_2_HOST} ${CMD}
this would ssh as the user assigned to ${USAGE_2_USER} to the host assigned to ${USAGE_2_HOST} and then run whatever you have assigned to ${CMD} and then return the output and then exit.
risk#DockMaster:~$ ssh oracle#orc017a uptime
13:17:41 up 9 days, 13:54, 7 users, load average: 1.67, 2.19, 2.11
risk#DockMaster:~$
As a side note is the -f -T needed?
I am using the program synergy together with an ssh tunnel
It works, i just have to open an console an type these two commands:
ssh -f -N -L localhost:12345:otherHost:12345 otherUser#OtherHost
synergyc localhost
because im lazy i made an Bash-Script which is run with one mouseclick on an icon:
#!/bin/bash
ssh -f -N -L localhost:12345:otherHost:12345 otherUser#OtherHost
synergyc localhost
the Bash-Script above works as well, but now i also want to kill synergy and the ssh tunnel via one mouseclick, so i have to save the PIDs of synergy and ssh into file to kill them later:
#!/bin/bash
mkdir -p /tmp/synergyPIDs || exit 1
rm -f /tmp/synergyPIDs/ssh || exit 1
rm -f /tmp/synergyPIDs/synergy || exit 1
[ ! -e /tmp/synergyPIDs/ssh ] || exit 1
[ ! -e /tmp/synergyPIDs/synergy ] || exit 1
ssh -f -N -L localhost:12345:otherHost:12345 otherUser#OtherHost
echo $! > /tmp/synergyPIDs/ssh
synergyc localhost
echo $! > /tmp/synergyPIDs/synergy
But the files of this script are empty.
How do I get the PIDs of ssh and synergy?
(I try to avoid ps aux | grep ... | awk ... | sed ... combinations, there has to be an easier way.)
With all due respect to the users of pgrep, pkill, ps | awk, etc, there is a much better way.
Consider that if you rely on ps -aux | grep ... to find a process you run the risk of a collision. You may have a use case where that is unlikely, but as a general rule, it's not the way to go.
SSH provides a mechanism for managing and controlling background processes. But like so many SSH things, it's an "advanced" feature, and many people (it seems, from the other answers here) are unaware of its existence.
In my own use case, I have a workstation at home on which I want to leave a tunnel that connects to an HTTP proxy on the internal network at my office, and another one that gives me quick access to management interfaces on co-located servers. This is how you might create the basic tunnels, initiated from home:
$ ssh -fNT -L8888:proxyhost:8888 -R22222:localhost:22 officefirewall
$ ssh -fNT -L4431:www1:443 -L4432:www2:443 colocatedserver
These cause ssh to background itself, leaving the tunnels open. But if the tunnel goes away, I'm stuck, and if I want to find it, I have to parse my process list and home I've got the "right" ssh (in case I've accidentally launched multiple ones that look similar).
Instead, if I want to manage multiple connections, I use SSH's ControlMaster config option, along with the -O command-line option for control. For example, with the following in my ~/.ssh/config file,
host officefirewall colocatedserver
ControlMaster auto
ControlPath ~/.ssh/cm_sockets/%r#%h:%p
the ssh commands above, when run, will leave spoor in ~/.ssh/cm_sockets/ which can then provide access for control, for example:
$ ssh -O check officefirewall
Master running (pid=23980)
$ ssh -O exit officefirewall
Exit request sent.
$ ssh -O check officefirewall
Control socket connect(/home/ghoti/.ssh/cm_socket/ghoti#192.0.2.5:22): No such file or directory
And at this point, the tunnel (and controlling SSH session) is gone, without the need to use a hammer (kill, killall, pkill, etc).
Bringing this back to your use-case...
You're establishing the tunnel through which you want syngergyc to talk to syngergys on TCP port 12345. For that, I'd do something like the following.
Add an entry to your ~/.ssh/config file:
Host otherHosttunnel
HostName otherHost
User otherUser
LocalForward 12345 otherHost:12345
RequestTTY no
ExitOnForwardFailure yes
ControlMaster auto
ControlPath ~/.ssh/cm_sockets/%r#%h:%p
Note that the command line -L option is handled with the LocalForward keyword, and the Control{Master,Path} lines are included to make sure you have control after the tunnel is established.
Then, you might modify your bash script to something like this:
#!/bin/bash
if ! ssh -f -N otherHosttunnel; then
echo "ERROR: couldn't start tunnel." >&2
exit 1
else
synergyc localhost
ssh -O exit otherHosttunnel
fi
The -f option backgrounds the tunnel, leaving a socket on your ControlPath to close the tunnel later. If the ssh fails (which it might due to a network error or ExitOnForwardFailure), there's no need to exit the tunnel, but if it did not fail (else), synergyc is launched and then the tunnel is closed after it exits.
You might also want to look in to whether the SSH option LocalCommand could be used to launch synergyc from right within your ssh config file.
Quick summary: Will not work.
My first idea is that you need to start the processes in the background to get their PIDs with $!.
A pattern like
some_program &
some_pid=$!
wait $some_pid
might do what you need... except that then ssh won't be in the foreground to ask for passphrases any more.
Well then, you might need something different after all. ssh -f probably spawns a new process your shell can never know from invoking it anyway. Ideally, ssh itself would offer a way to write its PID into some file.
just came across this thread and wanted to mention the "pidof" linux utility:
$ pidof init
1
You can use lsof to show the pid of the process listening to port 12345 on localhost:
lsof -t -i #localhost:12345 -sTCP:listen
Examples:
PID=$(lsof -t -i #localhost:12345 -sTCP:listen)
lsof -t -i #localhost:12345 -sTCP:listen >/dev/null && echo "Port in use"
well i dont want to add an & at the end of the commands as the connection will die if the console wintow is closed ... so i ended up with an ps-grep-awk-sed-combo
ssh -f -N -L localhost:12345:otherHost:12345 otherUser#otherHost
echo `ps aux | grep -F 'ssh -f -N -L localhost' | grep -v -F 'grep' | awk '{ print $2 }'` > /tmp/synergyPIDs/ssh
synergyc localhost
echo `ps aux | grep -F 'synergyc localhost' | grep -v -F 'grep' | awk '{ print $2 }'` > /tmp/synergyPIDs/synergy
(you could integrate grep into awk, but im too lazy now)
You can drop the -f, which makes it run it in background, then run it with eval and force it to the background yourself.
You can then grab the pid. Make sure to put the & within the eval statement.
eval "ssh -N -L localhost:12345:otherHost:12345 otherUser#OtherHost & "
tunnelpid=$!
Another option is to use pgrep to find the PID of the newest ssh process
ssh -fNTL 8073:localhost:873 otherUser#OtherHost
tunnelPID=$(pgrep -n -x ssh)
synergyc localhost
kill -HUP $tunnelPID
This is more of a special case for synergyc (and most other programs that try to daemonize themselves). Using $! would work, except that synergyc does a clone() syscall during execution that will give it a new PID other than the one that bash thought it has. If you want to get around this so that you can use $!, then you can tell synergyc to stay in the forground and then background it.
synergyc -f -n mydesktop remoteip &
synergypid=$!
synergyc also does a few other things like autorestart that you may want to turn off if you are trying to manage it.
Based on the very good answer of #ghoti, here is a simpler script (for testing) utilising the SSH control sockets without the need of extra configuration:
#!/bin/bash
if ssh -fN -MS /tmp/mysocket -L localhost:12345:otherHost:12345 otherUser#otherHost; then
synergyc localhost
ssh -S /tmp/mysocket -O exit otherHost
fi
synergyc will be only started if tunnel has been established successfully, which itself will be closed as soon as synergyc returns.
Albeit the solution lacks proper error reporting.
You could look out for the ssh proceess that is bound to your local port, using this line:
netstat -tpln | grep 127\.0\.0\.1:12345 | awk '{print $7}' | sed 's#/.*##'
It returns the PID of the process using port 12345/TCP on localhost. So you don't have to filter all ssh results from ps.
If you just need to check, if that port is bound, use:
netstat -tln | grep 127\.0\.0\.1:12345 >/dev/null 2>&1
Returns 1 if none bound or 0 if someone is listening to this port.
There are many interesting answers here, but nobody mentioned that the manpage of SSH does describe this exact case! (see TCP FORWARDING section). And the solution they offer is much simpler:
ssh -fL 12345:localhost:12345 user#remoteserver sleep 10
synergyc localhost
Now in details:
First we start SSH with a tunnel; thanks to -f it will initiate the connection and only then fork to background (unlike solutions with ssh ... &; pid=$! where ssh is sent to background and next command is executed before the tunnel is created). On the remote machine it will run sleep 10 which will wait 10 seconds and then end.
Within 10 seconds, we should start our desired command, in this case synergyc localhost. It will connect to the tunnel and SSH will then know that the tunnel is in use.
After 10 seconds pass, sleep 10 command will finish. But the tunnel is still in use by synergyc, so SSH will not close the underlying connection until the tunnel is released (i.e. until synergyc closes socket).
When synergyc is closed, it will release the tunnel, and SSH in turn will terminate itself, closing a connection.
The only downside of this approach is that if the program we use will close and re-open connection for some reason then SSH will close the tunnel right after connection is closed, and the program won't be able to reconnect. If this is an issue then you should use an approach described in #doak's answer which uses control socket to properly terminate SSH connection and uses -f to make sure tunnel is created when SSH forks to the background.