I am trying to complete a mortality table, using loops in Visual Foxpro. I have run into one difficulty where the math operation involves doing a sum of of all data in a column for the remaining rows - this needs to be incorporated into a loop. The strategy I thought would work, nesting a SUM REST function into the SCAN REST function, was not successful, and I haven't found a good alternative approach.
In FoxPro, I can successfully use the SCAN function as follows, say:
Go 1
Replace survivors WITH 1000000
SCATTER NAME oprev
SKIP
SCAN rest
replace survivors WITH (1 - oprev.prob) * oprev.survivors
SCATTER NAME oprev
ENDSCAN
(to take the mortality rates in a table and use it to compute number of survivors at each age)
Or, say:
Replace Yearslived WITH 0
SCATTER NAME oprev1
SKIP
SCAN rest
replace Yearslived WITH (oprev1.survivors + survivors) * 0.5
SCATTER NAME oprev1
ENDSCAN
In order to complete a mortality table I want to use the Yearslived and survivors data (which were produced using the SCANs above) to get life expectancy data as follows. Say we have the simplified table:
SURVIVORS YEARSLIVED LIFEEXP
100 0 ?
80 90 ?
60 70 ?
40 50 ?
20 30 ?
0 10 ?
Then each LIFEEXP record should be the sum of the remaining YEARSLIVED records divided by the corresponding Survivors record, i.e:
LIFEEXP (1) = (90+70+50+30+10)/100
LIFEEXP (2) = (70+50+30+10)/80
...and so on.
I attempted to do this with a similar SCAN approach - see below:
Go 1
SCATTER NAME Oprev2
SCAN rest
replace lifeexp WITH ((SUM yearslived Rest) - oprev2.yearslived) / oprev2.survivors
SCATTER NAME oprev2
ENDSCAN
But here I get the error message "Function name is missing)." Help tells me this is probably because the function contains too many arguments.
So I then also tried to break things down and first use SCAN just to get all of my SUM REST data, as follows:
SCAN rest
SUM yearslived REST
END SCAN
... in the hope that I could get this data, define it as a variable, and create a simpler SCAN function above. However, I seem to be doing something wrong here as well, as instead of getting all necessary sums (first the sum of rows 2 to end, then 3 to end, etc.), I only get one sum, of all the yearslived data. In other words, using the sample data, I am given just 250, instead of the list 250, 160, 90, 40, 10.
What am I doing wrong? And more generally, how can I create a loop in Foxpro that includes a function where you Sum up all remaining data in a specific column over and over again (first 2nd through last record, then 3rd through last record, and so on)?
Any help will be much appreciated!
TM
Well you are really hiding the important detail, your table's structure, sample data and desired output. Then it is mostly guess work which have a high chance of to be true.
You seem to be trying to do something like this:
Create Cursor Mortality (Survivors i, YearsLived i, LifeExp b)
Local ix, oprev1
For ix=100 To 0 Step -20
Insert Into Mortality (Survivors, YearsLived) Values (m.ix,0)
Endfor
Locate
Survivors = Mortality.Survivors
Skip
Scan Rest
Replace YearsLived With (m.Survivors + Mortality.Survivors) * 0.5
Survivors = Mortality.Survivors
Endscan
*** Here is the part that deals with your sum problem
Local nRecNo, nSum
Scan
* Save current recnord number
nRecNo = Recno()
Skip
* Sum REST after skipping to next row
Sum YearsLived Rest To nSum
* Position back to row where we started
Go m.nRecNo
* Do the replacement
Replace LifeExp With Iif(Survivors=0,0,m.nSum/Survivors)
* ENDSCAN would implicitly move to next record
Endscan
* We are done. Go first record and browse
Locate
Browse
While there are N ways to do this in VFP, this is one xbase approach to do that and relatively simple to understand IMHO.
Where did you go wrong?
Well, you tried to use SUM as if it were a function, but it is a command. There is SUM() function for SQL as an aggregate function but here you are using the xBase command SUM.
EDIT: And BTW in this code:
SCAN rest
SUM yearslived REST
ENDSCAN
What you are doing is, starting a SCAN with a scope of REST, in loop you are using another scoped command
SUM yearslived REST
This effectively does the summing on the REST of records and places the record pointer to bottom. Endscan further advances it to eof(). Thus it only works for the first record.
I'm a very new to lua so am happy to read material if it will help with tables.
I've decoded a json object and would like to build a table properly using its data, rather than writing 64 lines of the below:
a = {}
a[decode.var1[1].aId] = {decode.var2[1].bId, decode.var3[1].cId}
a[decode.var1[2].aId] = {decode.var2[2].bId, decode.var3[2].cId}
a[decode.var1[3].aId] = {decode.var2[3].bId, decode.var3[3].cId}
...etc
Because the numbers are consecutive 1-64, i presume i should be able to build it using a for loop.
Unfortunately despite going through table building ideas I cannot seem to find a way to do it, or find anything on creating nested tables using a loop.
Any help or direction would be appreciated.
Lua for-loops are, at least in my opinion, pretty easy to understand:
for i = 1, 10 do
print(i)
end
This loop inclusively prints the positive integers 1 through 10.
Lua for-loops also take an optional third argument--which defaults to 1--that indicates the step of the loop:
for i = 1, 10, 2 do
print(i)
end
This loop prints the numbers 1 through 10 but skips every other number, that is, it has a step of 2; therefore, it will print 1 3 5 7 9.
In the case of your example, if I understand it correctly, it seems that you know the minimum and maximum bounds of your for loops, which are 1 and 64, respectively. You could write a loop to decode the values and put them in a table like so:
local a = {}
for i = 1, 64 do
a[decodevar.var1[i].aId] = {decode.var2[i].bId, decode.var3[i].cId}
end
What you can do is generating a new table with all the contents from the decoded JSON with a for loop.
For example,
function jsonParse(jsonObj)
local tbl = {}
for i = 1, 64 do
a[decodevar.var1[i].aId] = {decode.var2[i].bId, decode.var3[i].cId}
end
return tbl
end
To deal with nested cases, you can recursively call that method as follows
function jsonParse(jsonObj)
local tbl = {}
for i = 1, 64 do
a[decodevar.var1[i].aId] = {decode.var2[i].bId, decode.var3[i].cId}
if type(decode.var2[i].bId) == "table" then
a[decodevar.var1[i].aid[0] = jsonParse(decode.var2[i].bId)
end
end
end
By the way, I can't understand why are you trying to create a table using a table that have done the job you want already. I assume they are just random and you may have to edit the code with the structure of the decodevar variable you have
How can I treat the last element of the input specially, when iterating with a for loop? In particular, if there is code that should only occur "between" elements (and not "after" the last one), how can I structure the code?
Currently, I write code like so:
for i, data in enumerate(data_list):
code_that_is_done_for_every_element
if i != len(data_list) - 1:
code_that_is_done_between_elements
How can I simplify or improve this?
Most of the times it is easier (and cheaper) to make the first iteration the special case instead of the last one:
first = True
for data in data_list:
if first:
first = False
else:
between_items()
item()
This will work for any iterable, even for those that have no len():
file = open('/path/to/file')
for line in file:
process_line(line)
# No way of telling if this is the last line!
Apart from that, I don't think there is a generally superior solution as it depends on what you are trying to do. For example, if you are building a string from a list, it's naturally better to use str.join() than using a for loop “with special case”.
Using the same principle but more compact:
for i, line in enumerate(data_list):
if i > 0:
between_items()
item()
Looks familiar, doesn't it? :)
For #ofko, and others who really need to find out if the current value of an iterable without len() is the last one, you will need to look ahead:
def lookahead(iterable):
"""Pass through all values from the given iterable, augmented by the
information if there are more values to come after the current one
(True), or if it is the last value (False).
"""
# Get an iterator and pull the first value.
it = iter(iterable)
last = next(it)
# Run the iterator to exhaustion (starting from the second value).
for val in it:
# Report the *previous* value (more to come).
yield last, True
last = val
# Report the last value.
yield last, False
Then you can use it like this:
>>> for i, has_more in lookahead(range(3)):
... print(i, has_more)
0 True
1 True
2 False
Although that question is pretty old, I came here via google and I found a quite simple way: List slicing. Let's say you want to put an '&' between all list entries.
s = ""
l = [1, 2, 3]
for i in l[:-1]:
s = s + str(i) + ' & '
s = s + str(l[-1])
This returns '1 & 2 & 3'.
if the items are unique:
for x in list:
#code
if x == list[-1]:
#code
other options:
pos = -1
for x in list:
pos += 1
#code
if pos == len(list) - 1:
#code
for x in list:
#code
#code - e.g. print x
if len(list) > 0:
for x in list[:-1]:
#process everything except the last element
for x in list[-1:]:
#process only last element
The 'code between' is an example of the Head-Tail pattern.
You have an item, which is followed by a sequence of ( between, item ) pairs. You can also view this as a sequence of (item, between) pairs followed by an item. It's generally simpler to take the first element as special and all the others as the "standard" case.
Further, to avoid repeating code, you have to provide a function or other object to contain the code you don't want to repeat. Embedding an if statement in a loop which is always false except one time is kind of silly.
def item_processing( item ):
# *the common processing*
head_tail_iter = iter( someSequence )
head = next(head_tail_iter)
item_processing( head )
for item in head_tail_iter:
# *the between processing*
item_processing( item )
This is more reliable because it's slightly easier to prove, It doesn't create an extra data structure (i.e., a copy of a list) and doesn't require a lot of wasted execution of an if condition which is always false except once.
If you're simply looking to modify the last element in data_list then you can simply use the notation:
L[-1]
However, it looks like you're doing more than that. There is nothing really wrong with your way. I even took a quick glance at some Django code for their template tags and they do basically what you're doing.
you can determine the last element with this code :
for i,element in enumerate(list):
if (i==len(list)-1):
print("last element is" + element)
This is similar to Ants Aasma's approach but without using the itertools module. It's also a lagging iterator which looks-ahead a single element in the iterator stream:
def last_iter(it):
# Ensure it's an iterator and get the first field
it = iter(it)
prev = next(it)
for item in it:
# Lag by one item so I know I'm not at the end
yield 0, prev
prev = item
# Last item
yield 1, prev
def test(data):
result = list(last_iter(data))
if not result:
return
if len(result) > 1:
assert set(x[0] for x in result[:-1]) == set([0]), result
assert result[-1][0] == 1
test([])
test([1])
test([1, 2])
test(range(5))
test(xrange(4))
for is_last, item in last_iter("Hi!"):
print is_last, item
We can achieve that using for-else
cities = [
'Jakarta',
'Surabaya',
'Semarang'
]
for city in cities[:-1]:
print(city)
else:
print(' '.join(cities[-1].upper()))
output:
Jakarta
Surabaya
S E M A R A N G
The idea is we only using for-else loops until n-1 index, then after the for is exhausted, we access directly the last index using [-1].
You can use a sliding window over the input data to get a peek at the next value and use a sentinel to detect the last value. This works on any iterable, so you don't need to know the length beforehand. The pairwise implementation is from itertools recipes.
from itertools import tee, izip, chain
def pairwise(seq):
a,b = tee(seq)
next(b, None)
return izip(a,b)
def annotated_last(seq):
"""Returns an iterable of pairs of input item and a boolean that show if
the current item is the last item in the sequence."""
MISSING = object()
for current_item, next_item in pairwise(chain(seq, [MISSING])):
yield current_item, next_item is MISSING:
for item, is_last_item in annotated_last(data_list):
if is_last_item:
# current item is the last item
Is there no possibility to iterate over all-but the last element, and treat the last one outside of the loop? After all, a loop is created to do something similar to all elements you loop over; if one element needs something special, it shouldn't be in the loop.
(see also this question: does-the-last-element-in-a-loop-deserve-a-separate-treatment)
EDIT: since the question is more about the "in between", either the first element is the special one in that it has no predecessor, or the last element is special in that it has no successor.
I like the approach of #ethan-t, but while True is dangerous from my point of view.
data_list = [1, 2, 3, 2, 1] # sample data
L = list(data_list) # destroy L instead of data_list
while L:
e = L.pop(0)
if L:
print(f'process element {e}')
else:
print(f'process last element {e}')
del L
Here, data_list is so that last element is equal by value to the first one of the list. L can be exchanged with data_list but in this case it results empty after the loop. while True is also possible to use if you check that list is not empty before the processing or the check is not needed (ouch!).
data_list = [1, 2, 3, 2, 1]
if data_list:
while True:
e = data_list.pop(0)
if data_list:
print(f'process element {e}')
else:
print(f'process last element {e}')
break
else:
print('list is empty')
The good part is that it is fast. The bad - it is destructible (data_list becomes empty).
Most intuitive solution:
data_list = [1, 2, 3, 2, 1] # sample data
for i, e in enumerate(data_list):
if i != len(data_list) - 1:
print(f'process element {e}')
else:
print(f'process last element {e}')
Oh yes, you have already proposed it!
There is nothing wrong with your way, unless you will have 100 000 loops and wants save 100 000 "if" statements. In that case, you can go that way :
iterable = [1,2,3] # Your date
iterator = iter(iterable) # get the data iterator
try : # wrap all in a try / except
while 1 :
item = iterator.next()
print item # put the "for loop" code here
except StopIteration, e : # make the process on the last element here
print item
Outputs :
1
2
3
3
But really, in your case I feel like it's overkill.
In any case, you will probably be luckier with slicing :
for item in iterable[:-1] :
print item
print "last :", iterable[-1]
#outputs
1
2
last : 3
or just :
for item in iterable :
print item
print iterable[-1]
#outputs
1
2
3
last : 3
Eventually, a KISS way to do you stuff, and that would work with any iterable, including the ones without __len__ :
item = ''
for item in iterable :
print item
print item
Ouputs:
1
2
3
3
If feel like I would do it that way, seems simple to me.
Use slicing and is to check for the last element:
for data in data_list:
<code_that_is_done_for_every_element>
if not data is data_list[-1]:
<code_that_is_done_between_elements>
Caveat emptor: This only works if all elements in the list are actually different (have different locations in memory). Under the hood, Python may detect equal elements and reuse the same objects for them. For instance, for strings of the same value and common integers.
Google brought me to this old question and I think I could add a different approach to this problem.
Most of the answers here would deal with a proper treatment of a for loop control as it was asked, but if the data_list is destructible, I would suggest that you pop the items from the list until you end up with an empty list:
while True:
element = element_list.pop(0)
do_this_for_all_elements()
if not element:
do_this_only_for_last_element()
break
do_this_for_all_elements_but_last()
you could even use while len(element_list) if you don't need to do anything with the last element. I find this solution more elegant then dealing with next().
For me the most simple and pythonic way to handle a special case at the end of a list is:
for data in data_list[:-1]:
handle_element(data)
handle_special_element(data_list[-1])
Of course this can also be used to treat the first element in a special way .
Better late than never. Your original code used enumerate(), but you only used the i index to check if it's the last item in a list. Here's an simpler alternative (if you don't need enumerate()) using negative indexing:
for data in data_list:
code_that_is_done_for_every_element
if data != data_list[-1]:
code_that_is_done_between_elements
if data != data_list[-1] checks if the current item in the iteration is NOT the last item in the list.
Hope this helps, even nearly 11 years later.
if you are going through the list, for me this worked too:
for j in range(0, len(Array)):
if len(Array) - j > 1:
notLast()
Instead of counting up, you can also count down:
nrToProcess = len(list)
for s in list:
s.doStuff()
nrToProcess -= 1
if nrToProcess==0: # this is the last one
s.doSpecialStuff()
I will provide with a more elegant and robust way as follows, using unpacking:
def mark_last(iterable):
try:
*init, last = iterable
except ValueError: # if iterable is empty
return
for e in init:
yield e, True
yield last, False
Test:
for a, b in mark_last([1, 2, 3]):
print(a, b)
The result is:
1 True
2 True
3 False
If you are looping the List,
Using enumerate function is one of the best try.
for index, element in enumerate(ListObj):
# print(index, ListObj[index], len(ListObj) )
if (index != len(ListObj)-1 ):
# Do things to the element which is not the last one
else:
# Do things to the element which is the last one
Delay the special handling of the last item until after the loop.
>>> for i in (1, 2, 3):
... pass
...
>>> i
3
There can be multiple ways. slicing will be fastest. Adding one more which uses .index() method:
>>> l1 = [1,5,2,3,5,1,7,43]
>>> [i for i in l1 if l1.index(i)+1==len(l1)]
[43]
If you are happy to be destructive with the list, then there's the following.
We are going to reverse the list in order to speed up the process from O(n^2) to O(n), because pop(0) moves the list each iteration - cf. Nicholas Pipitone's comment below
data_list.reverse()
while data_list:
value = data_list.pop()
code_that_is_done_for_every_element(value)
if data_list:
code_that_is_done_between_elements(value)
else:
code_that_is_done_for_last_element(value)
This works well with empty lists, and lists of non-unique items.
Since it's often the case that lists are transitory, this works pretty well ... at the cost of destructing the list.
Assuming input as an iterator, here's a way using tee and izip from itertools:
from itertools import tee, izip
items, between = tee(input_iterator, 2) # Input must be an iterator.
first = items.next()
do_to_every_item(first) # All "do to every" operations done to first item go here.
for i, b in izip(items, between):
do_between_items(b) # All "between" operations go here.
do_to_every_item(i) # All "do to every" operations go here.
Demo:
>>> def do_every(x): print "E", x
...
>>> def do_between(x): print "B", x
...
>>> test_input = iter(range(5))
>>>
>>> from itertools import tee, izip
>>>
>>> items, between = tee(test_input, 2)
>>> first = items.next()
>>> do_every(first)
E 0
>>> for i,b in izip(items, between):
... do_between(b)
... do_every(i)
...
B 0
E 1
B 1
E 2
B 2
E 3
B 3
E 4
>>>
The most simple solution coming to my mind is:
for item in data_list:
try:
print(new)
except NameError: pass
new = item
print('The last item: ' + str(new))
So we always look ahead one item by delaying the the processing one iteration. To skip doing something during the first iteration I simply catch the error.
Of course you need to think a bit, in order for the NameError to be raised when you want it.
Also keep the `counstruct
try:
new
except NameError: pass
else:
# continue here if no error was raised
This relies that the name new wasn't previously defined. If you are paranoid you can ensure that new doesn't exist using:
try:
del new
except NameError:
pass
Alternatively you can of course also use an if statement (if notfirst: print(new) else: notfirst = True). But as far as I know the overhead is bigger.
Using `timeit` yields:
...: try: new = 'test'
...: except NameError: pass
...:
100000000 loops, best of 3: 16.2 ns per loop
so I expect the overhead to be unelectable.
Count the items once and keep up with the number of items remaining:
remaining = len(data_list)
for data in data_list:
code_that_is_done_for_every_element
remaining -= 1
if remaining:
code_that_is_done_between_elements
This way you only evaluate the length of the list once. Many of the solutions on this page seem to assume the length is unavailable in advance, but that is not part of your question. If you have the length, use it.
One simple solution that comes to mind would be:
for i in MyList:
# Check if 'i' is the last element in the list
if i == MyList[-1]:
# Do something different for the last
else:
# Do something for all other elements
A second equally simple solution could be achieved by using a counter:
# Count the no. of elements in the list
ListLength = len(MyList)
# Initialize a counter
count = 0
for i in MyList:
# increment counter
count += 1
# Check if 'i' is the last element in the list
# by using the counter
if count == ListLength:
# Do something different for the last
else:
# Do something for all other elements
Just check if data is not the same as the last data in data_list (data_list[-1]).
for data in data_list:
code_that_is_done_for_every_element
if data != data_list[- 1]:
code_that_is_done_between_elements
So, this is definitely not the "shorter" version - and one might digress if "shortest" and "Pythonic" are actually compatible.
But if one needs this pattern often, just put the logic in to a
10-liner generator - and get any meta-data related to an element's
position directly on the for call. Another advantage here is that it will
work wit an arbitrary iterable, not only Sequences.
_sentinel = object()
def iter_check_last(iterable):
iterable = iter(iterable)
current_element = next(iterable, _sentinel)
while current_element is not _sentinel:
next_element = next(iterable, _sentinel)
yield (next_element is _sentinel, current_element)
current_element = next_element
In [107]: for is_last, el in iter_check_last(range(3)):
...: print(is_last, el)
...:
...:
False 0
False 1
True 2
This is an old question, and there's already lots of great responses, but I felt like this was pretty Pythonic:
def rev_enumerate(lst):
"""
Similar to enumerate(), but counts DOWN to the last element being the
zeroth, rather than counting UP from the first element being the zeroth.
Since the length has to be determined up-front, this is not suitable for
open-ended iterators.
Parameters
----------
lst : Iterable
An iterable with a length (list, tuple, dict, set).
Yields
------
tuple
A tuple with the reverse cardinal number of the element, followed by
the element of the iterable.
"""
length = len(lst) - 1
for i, element in enumerate(lst):
yield length - i, element
Used like this:
for num_remaining, item in rev_enumerate(['a', 'b', 'c']):
if not num_remaining:
print(f'This is the last item in the list: {item}')
Or perhaps you'd like to do the opposite:
for num_remaining, item in rev_enumerate(['a', 'b', 'c']):
if num_remaining:
print(f'This is NOT the last item in the list: {item}')
Or, just to know how many remain as you go...
for num_remaining, item in rev_enumerate(['a', 'b', 'c']):
print(f'After {item}, there are {num_remaining} items.')
I think the versatility and familiarity with the existing enumerate makes it most Pythonic.
Caveat, unlike enumerate(), rev_enumerate() requires that the input implement __len__, but this includes lists, tuples, dicts and sets just fine.