I'm trying to get the demo for the AEC DMO working (found here). It works, but only on certain machines. On those machines it fails on, AllocateStreamingResources fails with error code 0x80004005. The exact line of code is here.
I ran dependency walker on the .exe the demo code produces and on the machines it fails on, no dependency failures were detected. The code just doesn't do anything after reporting AllocateStreamingResources failed.
I'm running with the following parameters: -out mic_out.pcm -mod 0 -spkdev 0 -micdev 0.
All machines have functional speakers and microphones. Sound is playing out of the speakers when I run the application. Any thoughts?
I have solved similar problem by:
Uninstall audio device in the Device Manager
Reboot
Related
I’m trying to run the following command to generate grpc files:
protoc --proto_path=$PROTO_PATH --plugin=protoc-gen-grpc=$PLUGIN_GRPC --grpc_out=$OUT/grpc $PROTO_FILES
This results in the following error:
/Users/MYUSERNAME/Downloads/protoc-gen-grpc-java-1.48.1-osx-aarch_64.exe: program not found or is not executable
Please specify a program using absolute path or make sure the program is available in your PATH system variable
--grpc_out: protoc-gen-grpc: Plugin failed with status code 1.
I made sure the file from the error message is located at that path and has also the correct permissions.
-rwxrwxrwx# 1 MYUSERNAME staff 6334176 10 Aug 00:03 protoc-gen-grpc-java-1.48.1-osx-aarch_64.exe
I also tried running the command as sudo.
Generating java or kotlin files with --java_out=$OUT/java --kotlin_out=$OUT/kotlin
works perfectly fine, so the problem is --grpc_out=$OUT/grpc
I also downloaded multiple versions of the protoc-gen-grpc-java-1.48.1-osx-aarch_64.exe file but it always results in the same error. I also tried replacing all path variables (e.g. $PROTO_PATH) with their corresponding values, without any effect. I’m using MacBook with M1Pro chip.
The problem is that M1 Macs aren't supported. They have copied over the osx-x86_64 binary and renamed it for osx-aarch_64 as a workaround to make it easier to run with Rosetta. See here for where that change was made and here for the full conversation about supporting M1 Macs.
I have a Windows 10 laptop where no TeX distribution was ever installed before (double-checked for config directories, files, and environment variables).
Wanting to install TeX Live 2021, I followed the full installation guide and also read the Windows-specific warnings. I've now tried several times, following different installation procedures - cleaning up everything (deleting base & user directories, environment variables, etc) before each time - but still don't manage to get a working installation. Before I report a bug at tex-live#tug, I wanted to ask for advice here, in case I'm doing something wrong. Here is what I did, step by step, and the problems I encountered in the process.
1. First I tried running the recommended online installer install-tl-windows.exe. It never got past the screen that tries to contact or load from a repository, even after a 30-min wait. Tried a dozen times, choosing different mirrors nearby and far away. No luck.
2. Then I downloaded and unpacked the install-tl.zip and run install-tl-windows.bat therein. This time the main installation window appeared. I left all default paths and environment variables (note that I do have write access to C:); in the selection scheme I unselected all languages except US & UK English, unselected XeTeX, LuaTeX, ConTeXt; also unselected TeXworks (I use Emacs), and clicked Install. After one to three hours (depending on the mirror I chose), the installation was complete.
I tried compiling a minimal latex document (see below), and got an error similar to the one in this old question:
I can't find the format file `pdflatex.fmt'
Following the advice in the answers to that question and similar questions elsewhere online such as this, I tried running texhash and fmtutil-sys --all. The latter gave the error
no appropriate script or programme found fmtutil.
for which there are also many posts online.
2a. Not understanding what the problem could be, I re-tried with all possible combinations of the following three options: (a) choosing different mirrors; (b) leaving the full selection of packages (ie without unselecting some languages, LuaTeX etc); (c) redoing the procedure by choosing "Run as Administrator". No luck.
3. At this point I tried downloading the ISO file with the full installation. Mounted the image and run install-tl-windows.bat (as normal user, as recommended; I repeat that I do have write access to C:). Everything proceeded as in step 2. above. At the end of the installation I tried running pdflatex on the minimal latex document. New error this time:
This is pdfTeX, Version 3.141592653-2.6-1.40.22 (TeX Live 2021/W32TeX) (preloaded format=pdflatex)
restricted \write18 enabled.
entering extended mode
(./minimal-template.tex
LaTeX2e <2020-10-01> patch level 4
L3 programming layer <2021-02-18>
! LaTeX Error: File `article.cls' not found.
Very strange. A file search revealed that article.cls is in the TeXLive file system; but kpathsea did not see it indeed.
4. At this point I opened the TeX Live Shell from the Start Menu; selected a CTAN mirror; updated the TL Manager which was not up to date; updated all packages; run Regenerate filename database; and run Regenerate formats. With the latter I got this error:
tex live shell:
mtutil [INFO]: total formats: 59
fmtutil [INFO]: exiting with status 53
C:\texlive\2021\bin\win32\runscript.tlu:915: command failed with exit code 53:
perl.exe c:\texlive\2021\texmf-dist\scripts\texlive\fmtutil.pl --sys --all
Here is a snip from the full set of errors appearing in the "Other" tab (I'm replacing my user directory with asterisks for privacy; note that I do have write access to these directories):
start load https://www.nic.funet.fi/pub/TeX/CTAN/systems/texlive/tlnet
finish load https://www.nic.funet.fi/pub/TeX/CTAN/systems/texlive/tlnet
start load http://contrib.texlive.info/current
finish load http://contrib.texlive.info/current
running mktexlsr ...
done running mktexlsr.
running mtxrun --generate ...
done running mtxrun --generate.
running updmap-sys ...
done running updmap-sys.
regenerating fmtutil.cnf in C:/texlive/2021/texmf-dist
running fmtutil-sys --byengine luatex --no-error-if-no-format --no-error-if-no-engine=luajithbtex,luajittex,mfluajit --status-file=C:\Users\***\AppData\Local\Temp\rPSb0Dpak2\WW_dJvUHgX ...
tlmgr.pl: fmtutil-sys --byengine luatex --no-error-if-no-format --no-error-if-no-engine=luajithbtex,luajittex,mfluajit --status-file=C:\Users\***\AppData\Local\Temp\rPSb0Dpak2\WW_dJvUHgX failed (status 255), output:
Unknown option: status-file
Try "fmtutil --help" for more information.
C:\texlive\2021\bin\win32\runscript.tlu:915: command failed with exit code 255:
perl.exe c:\texlive\2021\texmf-dist\scripts\texlive\fmtutil.pl --sys --byengine luatex --no-error-if-no-format --no-error-if-no-engine=luajithbtex,luajittex,mfluajit --status-file=C:\Users\***\AppData\Local\Temp\rPSb0Dpak2\WW_dJvUHgX
running fmtutil-sys --byengine luajithbtex --no-error-if-no-format --no-error-if-no-engine=luajithbtex,luajittex,mfluajit --status-file=C:\Users\***\AppData\Local\Temp\rPSb0Dpak2\WW_dJvUHgX ...
I tried to continue anyway with Regenerate fontmaps, and then tried again pdflatex on the minimal document. New error:
This is pdfTeX, Version 3.141592653-2.6-1.40.23 (TeX Live 2021/W32TeX) (preloaded format=pdflatex)
restricted \write18 enabled.
---! c:/texlive/2021/texmf-var/web2c/pdftex/pdflatex.fmt made by different executable version
(Fatal format file error; I'm stymied)
5. I tried again steps 3. and 4., but with "Run as Administrator". Same errors.
OK at this point I give up and really don't know what to do. Am I doing something wrong? For the moment I have to concur with this post: installation of TeX Live 2021 is an utter failure.
Here is the minimal latex file I used for testing (copy & paste):
\documentclass{article}
\begin{document}
test
\section{Section}
test
\end{document}
Found, that the download is not working because the system path to "cmd.exe" is not found. Therefore: open a cmd window and add the system path prior to starting the .bat file (set PATH=%PATH%;C:\Windows\system32)
I just got started learning Haskell. And I chose to work with it on my PC through stack. First day, I worked with Chris Allen's tutorial and got stuck at the stack build part of it. The command exited with an error as shown below:
C:\Users\USER\haskellProjects\bassbull>stack build
primitive-0.6.2.0: download
integer-logarithms-1.0.2: download
primitive-0.6.2.0: configure
primitive-0.6.2.0: build
integer-logarithms-1.0.2: configure
integer-logarithms-1.0.2: build
primitive-0.6.2.0: copy/register
integer-logarithms-1.0.2: copy/register
Progress: 2/11Running C:\Users\USER\AppData\Local\Programs\stack\x86_64-windows\
ghc-8.0.2\bin\ghc-pkg.EXE --user --no-user-package-db --package-db C:\sr\snapsho
ts\1602ab97\pkgdb describe --simple-output integer-logarithms --expand-pkgroot e
xited with ExitFailure 1
WARNING: cache is out of date: C:/Users/USER/AppData/Local/Programs/stack/x86_64
-windows/ghc-8.0.2\lib\package.conf.d\package.cache
ghc will see an old view of this package db. Use 'ghc-pkg recache' to fix.
ghc-pkg.EXE: cannot find package integer-logarithms
Running C:\Users\USER\AppData\Local\Programs\stack\x86_64-windows\ghc-8.0.2\bin\
ghc-pkg.EXE --user --no-user-package-db --package-db C:\sr\snapshots\1602ab97\pk
gdb describe --simple-output primitive --expand-pkgroot exited with ExitFailure
1
WARNING: cache is out of date: C:/Users/USER/AppData/Local/Programs/stack/x86_64
-windows/ghc-8.0.2\lib\package.conf.d\package.cache
ghc will see an old view of this package db. Use 'ghc-pkg recache' to fix.
ghc-pkg.EXE: cannot find package primitive
C:\Users\USER\haskellProjects\bassbull>stack exec ghc-pkg recache
C:\Users\USER\haskellProjects\bassbull>stack build
integer-logarithms-1.0.2: configure
integer-logarithms-1.0.2: build
primitive-0.6.2.0: configure
primitive-0.6.2.0: build
integer-logarithms-1.0.2: copy/register
primitive-0.6.2.0: copy/register
Progress: 2/11Running C:\Users\USER\AppData\Local\Programs\stack\x86_64-windows\
ghc-8.0.2\bin\ghc-pkg.EXE --user --no-user-package-db --package-db C:\sr\snapsho
ts\1602ab97\pkgdb describe --simple-output primitive --expand-pkgroot exited wit
h ExitFailure 1
ghc-pkg.EXE: cannot find package primitive
Running C:\Users\USER\AppData\Local\Programs\stack\x86_64-windows\ghc-8.0.2\bin\
ghc-pkg.EXE --user --no-user-package-db --package-db C:\sr\snapshots\1602ab97\pk
gdb describe --simple-output integer-logarithms --expand-pkgroot exited with Exi
tFailure 1
ghc-pkg.EXE: cannot find package integer-logarithms
C:\Users\USER\haskellProjects\bassbull>
After trying out other tutorials I concluded that this happened only when trying to install external packages and dependencies.
Please I need help getting past this challenge I am facing, as I am very much enthusiastic about learning to code in (and coding in) Haskell.
The problem has been resolved. Much thanks to Michael Sloan on the Haskell-stack google group and Yuji Yamamoto on on Google+.
I'll just document what I did here:
I had felt my antivirus software was messing things up (in retrospect, the signs started showing up weeks back) so I updated it.
I did a clean uninstall of stack, hunted down its associated files/folders and wiped them off.
Then I reinstalled stack.
And started again with the tutorial mentioned in the question (No, Stack Overflow, I don't have 10 points to spare, thank you!).
I made sure to be connected to a steady network while doing stack setup for the first time, so that everything got downloaded with ease (the other time, connection timed out endlessly while fetching ghc and msys).
When that was done, I restarted the shell.
... and stack build completed successfully.
Now, I don't know exactly what did it for me, but I would love to. If it helps, I was (and I'm still) using stack-1.5.1 on a 64-bit windows7 PC.
Now I don't have to dump haskell for F#.
I have followed step by step the tutorial to install Veins, but when I tried running the example scenario (final step) I ended up with the above error.
The whole error was:
Error in module (cModule) RSUExampleScenario (id=1) during network
setup: Class "Veins::ObstacleControl" not found -- perhaps its code
was not linked in, or the class wasn't registered with
Register_Class(), or in the case of modules and channels, with
Define_Module()/Define_Channel().
TRAPPING on the exception above, due to a debug-on-errors=true
configuration option. Is your debugger ready?
Simulation terminated with exit code: -2147483645 Working directory:
C:/Users/user/src/veins-4.3/examples/veins Command line:
../../../omnetpp-4.6/bin/opp_run.exe -r 0 -n .;../../src/veins
--tkenv-image-path=../../images -l ../../src/veins omnetpp.ini
I don't think I have missed a step during the tutorial as I have tried it two times. I did not make any change in anything, I've just strictly followed the tutorial like a robot, so I cannot provide an MCVE with more details than the tutorial.
Here is what I'm using:
- Windows 7 Pro 64 bits
- SUMO 0.25.0 64 bits
All other steps of the tutorial successfully worked until the final step.
I assume this error occurs when running Veins via the OMNeT++ IDE. Or, if you have compiled it with GCC (The error does not happen if you use CLANG)
There are two ways to bypass this error:
Use the .run as executable from your examples directory, which calls veins/run and includes all the required libraries:
Use opp_run as executable and set dynamic libraries to the directory where libveins.so is located (usually src/veins)
PS: to answer #ChristopSommer questions: Veins::ObstacleControl appears in opp_run -l src/veins -h classes
This could be a solution too, but I never tested it: Compiler flags in Eclipse
I am using Marmalade to build a PlayBook app, but I think my question applies to PlayBook apps in general. I have successfully created a debugtoken.bar file and have installed it on my device. When I go to try to install a built application.bar file on the device, I get:
[execute] "blackberry-deploy.bat -device 192.168.1.114 -password ******* -installApp -package deployments\default\playbook\release\Quote Unquote.bar"
Info: Sending request: Install
Info: Action: Install
Info: File size: 6400334
Info: Installing ...
Info: Processing 6400334 bytes
actual_dname::
actual_id::
actual_version::
result::failure 881 required signatures missing (RDK, AUTHOR)
ERROR: error running blackberry-deploy
***ERROR***
Note that this is the Marmalade deploy tool running the standard PlayBook installer.
What I don't understand is: I thought the point of using a debugtoken.bar file was that you could install unsigned apps. I have in fact successfully deployed these unsigned apps using the Marmalade deploy tool just like this. But I was having problems signing the app for distribution, so I went back and did everything from scratch, requested new code signing keys from RIM, made a new debugtoken.bar file and installed it, etc. And now I'm worse off than I was before because I can't even install to the device now.
So again: My understanding is that the point of debugtoken.bar was to be able to deploy to the device before actually signing the application.bar for distribution. So what does this error message even mean?
To answer my own question:
For deploying a "debug" build to a device, it's critical to have
Application-Development-Mode: true
in the MANIFEST.MF within the .bar file.
A stupid mistake, but I'll leave this up in case it helps anyone...
Taking a look to the QNX deployment plugin "C:\Marmalade\6.1\s3e\deploy\plugins\qnx\qnx.py" I found that 'FOR DEVELOPMENT' option is false if the 'playbook_keystore' is given so I just cleared the signing section on the Marmalade System Deployment Tool and it is not longer trying to sign it