I'm trying to fix security vulnerabilities for Oracle Weblogic on Windows systems by applying the recommended patch file. However, many systems I am updating are rejecting the recommended patch - saying that coherence is not installed. The systems have been installed with fmw_12.2.1.4.0_wls (which includes Coherence(?)), and I have updated OPatch to the most recent version as well. I have also set the ORACLE_HOME and JAVA_HOME environment variables to point to the correct file paths, and have tried running the attachHome command.
Here is what the command prompt shows after attempting to apply the patch:
Oracle Interim Patch Installer version 13.9.4.2.4
Copyright (c) 2020, Oracle Corporation. All rights reserved.
Oracle Home : C:\Oracle\MIDDLE~1
Central Inventory : C:\Program Files (x86)\Oracle\Inventory
from :
OPatch version : 13.9.4.2.4
OUI version : 13.9.4.0.0
Log file location : C:\Oracle\MIDDLE~1\cfgtoollogs\opatch\opatch2020-12-29_20-42-48PM_1.log
OPatch detects the Middleware Home as "C:\Oracle\Middleware"
Verifying environment and performing prerequisite checks...
UtilSession failed: Patch 121307 requires component(s) that are not installed in OracleHome. Or don't have required patch level. These not-installed components are oracle.coherence:12.1.3.0.0:patchlevel-(or higher),
Log file location: C:\Oracle\MIDDLE~1\cfgtoollogs\opatch\opatch2020-12-29_20-42-48PM_1.log
OPatch failed with error code = 73
The log file produces the same error as well.
Related
When i try to launch the following line :
ora2pg -t SHOW_VERSION -c config/ora2pg.conf
I get the following error :
install_driver(Oracle) failed: Can't load 'C:\Strawberry\perl\site\lib/auto/DBD/Oracle/Oracle.xs.dll' for module DBD::Oracle: load_file:Le module spécifié est introuvable at C:/Strawberry/perl/lib/DynaLoader.pm line 193.
at (eval 15) line 3.
Compilation failed in require at (eval 15) line 3.
Perhaps a required
shared library or dll isn't installed where expected at
C:\Strawberry\perl\site\lib/Ora2Pg.pm line 1552.
I'm using Strawberry perl 5.28, 64bit.
What can I do ?
I solved this by adding the Oracle directory in the PATH.
For connect to Oracle database you must have Oracle client with OCI.dll accessible to be dynamically loaded by Oracle.xs.dll. So, if you haven't any Oracle client installed then from the Oracle web site download the Oracle instant client, the same 32/64-bit edition like your Strawberry edition is, unpack it somewhere, where you want to store it (e.g. C:\Progs\OracleInstantClient), and add directory containing OCI.dll to the PATH environment variable. Then it should works.
Chocolaty Cannot install packages.
I cannot install any packages from chocolatey package manager
here is the full command prompt message
C:\WINDOWS\system32>choco install winrar -dv
Chocolatey v0.10.11
Chocolatey is running on Windows v 10.0.17134.0
Attempting to delete file "C:/ProgramData/chocolatey/choco.exe.old".
Attempting to delete file "C:\ProgramData\chocolatey\choco.exe.old".
Command line: "C:\ProgramData\chocolatey\choco.exe" install winrar -dv
Received arguments: install winrar -dv
RemovePendingPackagesTask is now ready and waiting for PreRunMessage.
Sending message 'PreRunMessage' out if there are subscribers...
[Pending] Removing all pending packages that should not be considered installed...
The source 'https://chocolatey.org/api/v2/' evaluated to a 'normal' source type
NOTE: Hiding sensitive configuration data! Please double and triple
check to be sure no sensitive data is shown, especially if copying
output to a gist for review.
Configuration: CommandName='install'|
CacheLocation='C:\Users\irrem\AppData\Local\Temp\chocolatey'|
ContainsLegacyPackageInstalls='True'|
CommandExecutionTimeoutSeconds='2700'|WebRequestTimeoutSeconds='30'|
Sources='https://chocolatey.org/api/v2/'|SourceType='normal'|
Debug='True'|Verbose='True'|Trace='False'|Force='False'|Noop='False'|
HelpRequested='False'|UnsuccessfulParsing='False'|RegularOutput='True'|
QuietOutput='False'|PromptForConfirmation='True'|AcceptLicense='False'|
AllowUnofficialBuild='False'|Input='winrar'|AllVersions='False'|
SkipPackageInstallProvider='False'|PackageNames='winrar'|
Prerelease='False'|ForceX86='False'|OverrideArguments='False'|
NotSilent='False'|ApplyPackageParametersToDependencies='False'|
ApplyInstallArgumentsToDependencies='False'|IgnoreDependencies='False'|
AllowMultipleVersions='False'|AllowDowngrade='False'|
ForceDependencies='False'|Information.PlatformType='Windows'|
Information.PlatformVersion='10.0.17134.0'|
Information.PlatformName='Windows 10'|
Information.ChocolateyVersion='0.10.11.0'|
Information.ChocolateyProductVersion='0.10.11'|
Information.FullName='choco, Version=0.10.11.0, Culture=neutral, PublicKeyToken=79d02ea9cad655eb'|
Information.Is64BitOperatingSystem='True'|
Information.Is64BitProcess='True'|Information.IsInteractive='True'|
Information.UserName='irrem'|
Information.UserDomainName='DESKTOP-8FVQM8H'|
Information.IsUserAdministrator='True'|
Information.IsUserSystemAccount='False'|
Information.IsUserRemoteDesktop='False'|
Information.IsUserRemote='True'|
Information.IsProcessElevated='True'|
Information.IsLicensedVersion='False'|Information.LicenseType='Foss'|
Features.AutoUninstaller='True'|Features.ChecksumFiles='True'|
Features.AllowEmptyChecksums='False'|
Features.AllowEmptyChecksumsSecure='True'|
Features.FailOnAutoUninstaller='False'|
Features.FailOnStandardError='False'|Features.UsePowerShellHost='True'|
Features.LogEnvironmentValues='False'|Features.LogWithoutColor='False'|
Features.VirusCheck='False'|
Features.FailOnInvalidOrMissingLicense='False'|
Features.IgnoreInvalidOptionsSwitches='True'|
Features.UsePackageExitCodes='True'|
Features.UseFipsCompliantChecksums='False'|
Features.ShowNonElevatedWarnings='True'|
Features.ShowDownloadProgress='True'|
Features.StopOnFirstPackageFailure='False'|
Features.UseRememberedArgumentsForUpgrades='False'|
Features.IgnoreUnfoundPackagesOnUpgradeOutdated='False'|
Features.RemovePackageInformationOnUninstall='False'|
Features.ScriptsCheckLastExitCode='False'|
ListCommand.LocalOnly='False'|
ListCommand.IdOnly='False'|ListCommand.IncludeRegistryPrograms='False'|
ListCommand.PageSize='25'|ListCommand.Exact='False'|
ListCommand.ByIdOnly='False'|ListCommand.ByTagOnly='False'|
ListCommand.IdStartsWith='False'|ListCommand.OrderByPopularity='False'|
ListCommand.ApprovedOnly='False'|
ListCommand.DownloadCacheAvailable='False'|
ListCommand.NotBroken='False'|
ListCommand.IncludeVersionOverrides='False'|
UpgradeCommand.FailOnUnfound='False'|
UpgradeCommand.FailOnNotInstalled='False'|
UpgradeCommand.NotifyOnlyAvailableUpgrades='False'|
UpgradeCommand.ExcludePrerelease='False'|
NewCommand.AutomaticPackage='False'|
NewCommand.UseOriginalTemplate='False'|SourceCommand.Command='unknown'|
SourceCommand.Priority='0'|SourceCommand.BypassProxy='False'|
SourceCommand.AllowSelfService='False'|
SourceCommand.VisibleToAdminsOnly='False'|
FeatureCommand.Command='unknown'|ConfigCommand.Command='unknown'|
PinCommand.Command='unknown'|OutdatedCommand.IgnorePinned='False'|
Proxy.BypassOnLocal='True'|
_ Chocolatey:ChocolateyInstallCommand - Normal Run Mode _
Installing the following packages:
winrar
By installing you accept licenses for the packages.
**[NuGet] An error occurred while loading packages from 'https://chocolatey.org/api/v2/': The remote server returned an error: (403) Forbidden.**
winrar not installed. The package was not found with the source(s) listed.
Source(s): 'https://chocolatey.org/api/v2/'
NOTE: When you specify explicit sources, it overrides default sources.
If the package version is a prerelease and you didn't specify `--pre`,
the package may not be found.
Please see https://chocolatey.org/docs/troubleshooting for more
assistance.
Chocolatey installed 0/1 packages. 1 packages failed.
See the log for details (C:\ProgramData\chocolatey\logs\chocolatey.log).
Failures
- winrar - winrar not installed. The package was not found with the source(s) listed.
Source(s): 'https://chocolatey.org/api/v2/'
NOTE: When you specify explicit sources, it overrides default sources.
If the package version is a prerelease and you didn't specify `--pre`,
the package may not be found.
Please see https://chocolatey.org/docs/troubleshooting for more
assistance.
Sending message 'PostRunMessage' out if there are subscribers...
Exiting with 1
The Chocolatey Community Repoository was having issues around that time. Are you still having issues now?
To keep up to date with all the Chocolatey notifications use:
Twitter - https://twitter.com/chocolateynuget
Gitter - https://github.com/chocolatey/choco#chat-room
Google Groups - https://groups.google.com/forum/#!forum/chocolatey (and https://groups.google.com/forum/#!forum/chocolatey-announce for announcements)
The issues were announced on those mediums.
The installation of the master component stops because the Prerequisite Check tool fails to run.
Error message:
37 INFO 02:30.96 executePRScript(/tmp/IMC_01010000,prs.tws.script.cfg.unix): Enter.
38 INFO 02:32.52 PRS command used for execution:echo IMC=IMC >> /tmp/IMC_01010000/
codename.cfg&&chmod -R 755/tmp/IMC_01010000&&/tmp/IMC_01010000/prereq_checker.sh
IMC detail outputDir=/tmp/IMC_01010000
39 ERROR 02:32.53 PRS job is finished. Results are not available.
40 WARNING 02:32.53 Error occurred while executing executePRScript.
Running manually the prereq_checker.sh I receive the following error message:
CTGPR2514E: Ensure that the binary for bc is available on the local system and is set
in the PATH environment variable.
The binary for bc is missing on your system. It must be installed before you run the Prerequisite Check.
bc 1.06.95
Copyright 1991-1994, 1997, 1998, 2000, 2004, 2006 Free Software Foundation, Inc.
This is free software with ABSOLUTELY NO WARRANTY.
For additional information, see: https://www.gnu.org/software/bc/manual/html_mono/bc.html#SEC2
I have installed PostgreSQL 9.4 (x86), PG Admin 1.20 and Slony-I 2.2.3 through Stack Builder on a windows platform.
When trying to create a new Slony cluster in pgAdmin, I get the
"Slony-I creation scripts not available" error message.
1) I have setup options Slony-I path to
-->:C:\Program Files (x86)\PostgreSQL\9.4\share
where all the slony1_*.sql scripts are located but I still get the same error.
2) Using procmon I see that PGAdmin tries to access "slony1_funcs.sql" and "slony1_funcs.2.2.0.sql" none of which exist in my \share directory
the installed funcs scripts are "slony1_funcs.2.2.3.sql", "slony1_funcs.v83.2.2.3.sql", slony1_funcs.v84.2.2.3.sql
and the base scripts are "slony1_base.2.2.3.sql", "slony1_base.v83.2.2.3.sql", slony1_base.v84.2.2.3.sql
3) I have tried to rename "slony1_funcs.2.2.3.sql" to "slony1_funcs.2.2.0.sql" and "slony1_funcs.sql" and I now get a new error "Couldn't test for the Slony version. Assuming 1.2.0" and again the
"Slony-I creation scripts not available" error message
Does anyone have an idea how to get this working?
How do I check that all services and patches are installed in Oracle?
I have an Oracle 10.2.0.2.0 db version and want to install patches. Also I want to get a list with all services and patches.
Here is an article on how to check and or install new patches :
To find the OPatch tool setup your database enviroment variables and then issue this comand:
cd $ORACLE_HOME/OPatch
> pwd
/oracle/app/product/10.2.0/db_1/OPatch
To list all the patches applies to your database use the lsinventory option:
[oracle#DCG023 8828328]$ opatch lsinventory
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /u00/product/11.2.0/dbhome_1
Central Inventory : /u00/oraInventory
from : /u00/product/11.2.0/dbhome_1/oraInst.loc
OPatch version : 11.2.0.3.4
OUI version : 11.2.0.1.0
Log file location : /u00/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch2013-11-13_13-55-22PM_1.log
Lsinventory Output file location : /u00/product/11.2.0/dbhome_1/cfgtoollogs/opatch/lsinv/lsinventory2013-11-13_13-55-22PM.txt
Installed Top-level Products (1):
Oracle Database 11g 11.2.0.1.0
There are 1 products installed in this Oracle Home.
Interim patches (1) :
Patch 8405205 : applied on Mon Aug 19 15:18:04 BRT 2013
Unique Patch ID: 11805160
Created on 23 Sep 2009, 02:41:32 hrs PST8PDT
Bugs fixed:
8405205
OPatch succeeded.
To list the patches using sql :
select * from registry$history;
I understand the original post is for Oracle 10 but this is for reference by anyone else who finds it via Google.
Under Oracle 12c, I found that that my registry$history is empty.
This works instead:
select * from registry$sqlpatch;
Maybe you need "sys." before:
select * from sys.registry$history;