Invoice numbers are numeric only with any number of digits. To format one correctly, group the digits in group of three plus a group of any remainder, but never leave one digit by itself, unless it's a one digit number. Eg these are all correct formatting
123
12-34
6
783-907-23-45
And these are not
123-4
98-456
There's one more catch user input is passed directly to the function and you never know what characters users might type. Ignore any part of the input that is not digit
Invoice.format_number should always return a string
module Invoice
def self.format_number(str)
return ""
end
end
puts Invoice.format_number("ab1234")
What I have tried
1st approach
arr = []
str.chars.each do |elem|
val = elem =~ /\A[-+]?[0-9]*\.?[0-9]+\Z/
arr << elem if val == 0
end
num_of_digits = arr.length
pairs_of_two = 0
pairs_of_three = 0
if num_of_digits > 5
while num_of_digits > 0 do
break if num_of_digits <= 3
if num_of_digits >= 3 && (num_of_digits % 3 == 0 || num_of_digits % 3 == 2)
pairs_of_three += 1
num_of_digits -= 3
elsif num_of_digits % 2 == 0 || num_of_digits % 2 == 1
pairs_of_two += 1
num_of_digits -= 2
end
end
end
2nd approach
arr = []
str.chars.each do |elem|
val = elem =~ /\A[-+]?[0-9]*\.?[0-9]+\Z/
arr << elem if val == 0
end
len = arr.length - 1
if arr.length > 4
str = ""
i = 0
while i < len do
if arr[i..i+3].length == 4
str << arr[i..i+2].join + "-"
i += 3
elsif arr[i..i+2].length == 3
str << arr[i..i+1].join + "-"
i += 2
elsif arr[i..i+1].length == 2
str << arr[i..i+1].join
i += 2
elsif !arr[i].nil?
str << arr[i]
i += 1
end
end
puts str
else
if arr.length <= 3
puts arr.join
else
puts arr[0..1].join + "-" + arr[2..3].join
end
end
But none of them is correct
Here is the function invoice_number in python
def invoice_number(invoice):
s = ''.join(x for x in invoice if x <= '9' and x >= '0')
n = len(s)
if n <= 3:
return s
w = ''
i = 0
while i + 3 <= n:
for j in range(0, 3):
w += s[i + j]
i += 3
w += ('-')
m = n - i
if m == 0: return w[:-1]
if m == 1: return w[:m-3] + '-' + s[-2:]
return w + s[i:]
Testing
print(invoice_number('1234567'))
print(invoice_number('12345678'))
print(invoice_number('abc123456789'))
print(invoice_number('1234abc5678xyz9foobar'))
123-45-67
123-456-78
123-456-789
123-456-789
Eliminating non-digits is easy with re. For your format, the key is to figure our the "right" splitting indices.
Here is a try:
import re
def splits(n, k):
idx = [(i, min(n, i+k)) for i in range(0, n, k)]
if len(idx) > 1:
(a, b), (c, d) = idx[-2:]
if d - c < 2:
idx[-2:] = [(a, b - 1), (c - 1, d)]
return idx
def myformat(s):
s = re.sub(r'[^0-9]+', '', s)
parts = [s[a:b] for a, b in splits(len(s), 3)]
return '-'.join(parts)
Tests:
>>> myformat('123')
123
>>> myformat('1234')
12-34
>>> myformat('6')
6
>>> myformat('7839072345')
783-907-23-45
As the question was asked for ruby, adding solution for ruby. (The inspiration of the code is mostly from #yuri answer)
def format_invoice(invoice)
# only numbers are allowed
invoice = invoice.tr("^0-9","")
#puts invoice
return invoice if(invoice.length <= 3)
formatted_invoice = ''
i = 0
# Loop to divide the invoice in group of 3
while i + 3 <= invoice.length do
for j in 0..2 do
formatted_invoice += invoice[i + j]
end
i += 3
formatted_invoice += ('-')
end
m = invoice.length - i
return formatted_invoice[0..-2] if m == 0
return formatted_invoice[0..m-4] + '-' + invoice[-2..-1] if m == 1
return formatted_invoice + invoice[i..-1]
end
Testing
puts format_invoice('abc1') # 1
puts format_invoice('abc123') # 123
puts format_invoice('abc123A4') # 12-34
puts format_invoice('1234567') # 123-45-67
puts format_invoice('12345678') # 123-456-78
puts format_invoice('abc123456789') # 123-456-789
puts format_invoice('1234a#c5678xyz9foobar') # 123-456-789
Related
I have written a code for the drawing board for the minesweeper game, can anyone help me to refactor this code more.
Please find my code below
def draw(height, width, mines)
board = Array.new(height) { Array.new(width,0) }
x = Random.rand(height)
y = Random.rand(width)
mines.times do
until board[x][y] != 'x'
x = Random.rand(height)
y = Random.rand(width)
end
board[x][y] = 'x'
end
board.each_with_index do |row, i|
row.each_with_index do |elem, j|
next if board[i][j] == 'x'
count = 0
count += 1 if i+1 < height && board[i+1][j] == 'x'
count += 1 if j+1 < width && board[i][j+1] == 'x'
count += 1 if i-1 >= 0 && board[i-1][j] == 'x'
count += 1 if j-1 >= 0 && board[i][j-1] == 'x'
board[i][j] = count
end
end
board.each do |row|
row.each do |e|
print "#{e} "
end
print "\n"
end
end
draw(4,4,3)
Thanks in advance.
I think you need to check 8 adjacent cells, not 4. Since this is a refactoring, I kept the original behavior.
def draw(height, width, mines)
board = Array.new(height) { Array.new(width, 0) }
mines.times do
x = rand(height)
y = rand(width)
redo if board[x][y] == 'x'
board[x][y] = 'x'
[[x - 1, y], [x + 1, y], [x, y - 1], [x, y + 1]].each do |x, y|
next if x < 0 || x >= height
next if y < 0 || y >= width
next if board[x][y] == 'x'
board[x][y] += 1
end
end
board.each { |row| puts row.join(' ') }
end
Trying to multiply each number by array position, and it's coming out false:
def the_sum(number)
i = 0
number = 0
ans = 0
while i < 0
ans = string[idx] * string.index
i += idx
end
return ans
end
test =
the_sum([2, 3]) == 3 # (2*0) + (3*1)
the_sum([2, 3, 5]) == 13 # (2*0) + (3*1) + (5*2)
and it comes out false?
There are a few problems here
def the_sum(number)
i = 0
number = 0 # You just cleared your input variable!
ans = 0
while i < 0 # You previously i = 0 so this will never be true
ans = string[idx] * string.index
i += idx
end
return ans # Ans is and was always 0
end
This can be fixed by calling each_with_index on the Array that you're passing.
def the_array_sum(array)
ans = 0
array.each_with_index do |val, index|
ans += val * index
end
return ans
end
the_array_sum([2, 3]) == 3
# => true
the_array_sum([2, 3, 5]) == 13
# => true
FizzBuzz, a classic problem, returns all the numbers up to N with a slight twist. If a number is divisible by 3, it is replaced with "fizz". If it's divisible by 5, it's replaced with "buzz". If it's divisible by both, it's replaced with "fizzbuzz"
I keep getting this Error message:
comparison of Fixnum with nil failed
Can someone explain this error message to me please? Also why is the code not working?
def fizz_buzz(n)
arr = (1..n).to_a
i = 0
while arr[i] < arr[n]
if i % 3 == 0 && i % 5 == 0
arr[i] = 'fizzbuzz'
elsif i % 3 == 0
arr[i] = 'fizz'
elsif i % 5 == 0
arr[i] = 'buzz'
else
arr[i] = i
i += 1
end
end
return arr
end
fizz_buzz(12)
Your conditions are just a bit off, give this a try:
def fizz_buzz(n)
arr = (1..n).to_a
i = 0
while i < n
if arr[i] % 3 == 0 && arr[i] % 5 == 0
arr[i] = 'fizzbuzz'
elsif arr[i] % 3 == 0
arr[i] = 'fizz'
elsif arr[i] % 5 == 0
arr[i] = 'buzz'
end
i+=1
end
return arr
end
Trying to access arr[n] puts you outside the bounds of the array which returns nil in Ruby.
You can update the code the ruby way, by using blocks and guards, I don't remember last time I used a while loop in ruby :)
Also, Array.new accepts a block as an argument which you can exploit to build your Array in a single step:
def fizz_buzz(n)
Array.new(n) do |index|
x = index + 1
case
when x % 3 == 0 && x % 5 == 0 then "fizzbuzz"
when x % 3 == 0 then "fizz"
when x % 5 == 0 then "buzz"
else x
end
end
end
Notice I used 1 as a base index and not 0, you can just remove x = index + 1 and replace x with index to have it working in a zero index base
A solution with a block instead of the while loop, and guards
def fizz_buzz(n)
arr = (1..n).to_a
0.upto(n - 1) do |i|
arr[i] = "fizzbuzz" and next if i % 3 == 0 && i % 5 == 0
arr[i] = "fizz" and next if i % 3 == 0
arr[i] = "buzz" if i % 5 == 0
end
arr
end
#brad-melanson beat me to the straight-forward answer to your question, so I'll share an answer which uses some common Ruby idioms (passing a range to the Array constructor and map), which simplify things, prevent you from having to do any iteration bookkeeping and prevent the possibility of off-by-one errors, out-of-bounds errors, etc.
def fizz_buzz(n)
Array(1..12).map do |n|
if n % 3 == 0 && n % 5 == 0
'fizzbuzz'
elsif n % 3 == 0
'fizz'
elsif n % 5 == 0
'buzz'
else
n
end
end
end
result = fizz_buzz 12
# result => [1, 2, "fizz", 4, "buzz", "fizz", 7, 8, "fizz", "buzz", 11, "fizz"]
I need output of Floyd triangle like:
1
0 1
1 0 1
0 1 0 1
I tried. I didn't get it exactly. Can anyone explain the logic?
This is the code I tried:
k = 0
for i in 1..5
for j in 1..5
if (i%2)==0;
k = (j%2==0) ? 1:0;
else;
k = (j%2==0) ? 0:1;
puts k,'';
end
end
puts
end
The main issue here is that in order to get the "triangle" shape of your output, you need your inner loop to increment from 1 to i instead of 1 to 5.
k = 0
for i in 1..5
for j in 1..i
if (i%2)==0
k = j + 1
else
k = j
end
print "#{k%2} "
end
puts
end
Here's a one line approach:
5.times {|line| puts (line + 1).times.with_object(""){|num, str| (num + line).even? ? (str << " 1 ") : (str << " 0 ") } }
to make it more clear:
lines = 5
lines.times do |line|
str = ""
line = line + 1 # 5.times runs from 0 to 4 and we need 1 to 5
line.times do |num|
# the condition is a bit different because I changes the code a bit
if (line + num).even?
str << " 0 "
else
str << " 1 "
end
end
puts str
end
Alright the following should work, but i hope it's readable. If you need more explanation or have specific questions let me know
i = 1
while i <= 4 do
if i%2 > 0
output = 1
else
output = 0
end
j = 1
while j <= i do
print( "#{output} " )
if output == 1
output = 0
else
output = 1
end
j+=1
end
print( "\n" )
i+=1
end
You can try following code for output you are expecting:
k = 0
for i in 1..4
for j in 1..i // inner loop code runs i times for each outer loop iteration
if (i%2)==0;
k = (j%2==0) ? 1:0;
else;
k = (j%2==0) ? 0:1;
end
print k,' ';
end
puts
end
Click Here to see output.
You can also get idea about for loops through this link.
The prefered ruby way:
layers = 4 # Change to as many layers as you want
layers.times do |i| # i starts from 0
(i + 1).times do |j| # j also starts from 0
print (i + j + 1) & 1, ' '
end
puts
end
The for way:
layers = 4
for i in 0...layers
for j in 0...(i + 1)
print (i + j + 1) & 1, ' '
end
puts
end
if i run the code, it will stop and not do anything and i am unable to type. seems to be an infinite loop.
the problem seems to be the end until loop, however if i take that out, my condition will not be met.
can anyone find a solution? i have tried all the loops that i can think of.
/. 2d array board ./
board = Array.new(10) { Array.new(10, 0) }
/. printing board ./
if board.count(5) != 5 && board.count(4) != 4 && board.count(3) != 3
for i in 0..9
for j in 0..9
board[i][j] = 0
end
end
aircraftcoord1 = (rand*10).floor
aircraftcoord2 = (rand 6).floor
aircraftalign = rand
if aircraftalign < 0.5
for i in 0..4
board[aircraftcoord2+i][aircraftcoord1] = 5
end
else
for i in 0..4
board[aircraftcoord1][aircraftcoord2+i] = 5
end
end
cruisercoord1 = (rand*10).floor
cruisercoord2 = (rand 7).floor
cruiseralign = rand
if cruiseralign < 0.5
for i in 0..3
board[cruisercoord2+i][cruisercoord1] = 4
end
else
for i in 0..3
board[cruisercoord1][cruisercoord2+i] = 4
end
end
destroyercoord1 = (rand*10).floor
destroyercoord2 = (rand 8).floor
destroyeralign = rand
if destroyeralign < 0.5
for i in 0..2
board[destroyercoord2+i][destroyercoord1] = 3
end
else
for i in 0..2
board[destroyercoord1][destroyercoord2+i] = 3
end
end
end until board.count(5) == 5 && board.count(4) == 4 && board.count(3) == 3
print " "
for i in 0..9
print i
end
puts
for i in 0..9
print i
for j in 0..9
print board[i][j]
end
puts
end
The line board.count(5) == 5 ... will never be true because board is a two-dimensional array. I can't tell what the condition should be, but it could look something like:
board[5].count(5) == 5