What should I do if I want to repeat copies of a matrix into a 2-by-2 block arrangement?
For example:
A=1..4$2:2
#0 #1
-- --
1 3
2 4
I need to repeat it n times, the matrix should be
#0 #1 #2 #3
-- -- -- --
1 3 1 3
2 4 2 4
1 3 1 3
2 4 2 4
Any idea how to accomplish this without using loop?
Try the functionrepmat:
repmat(A,2,2)
Related
Let's assume these are our numbers and we are looking for mod for them
which we can find them using library(pracma)
> mod(c(1,4,23,13,8,9,11,27,32,2),7)
> [1] 1 4 2 6 1 2 4 6 4 2
I want to get a number to see where each number is coming from when it is a matrix?
1,1,4,2,2,2,2,4,5,1
For example; if this is an m by 7 matrix;
We know that it is on 2nd column but what row? 9 is 2nd row (2,2) but not quotient is 1, then 23 is 4th row (4,2) but quotient is 3. Finally, last element 2 is on (1,2).
I am looking for row position since I can use the mod as a column position.
I came out with this
b=c(1,4,23,13,7,9,11,27,32,2)
floor(b/7+1)
[1] 1 1 4 2 2 2 2 4 5 1
I have got a sequence 1 2 3 4 5 6 ... n. Now, I am given a sequence of n deletions - each deletion is a number which I want to delete. I need to respond to each deletion with two numbers - of a left and right neighbour of deleted number (-1 if any doesn't exists).
E.g. I delete 2 - I respond 1 3, then I delete 3 I respond 1 4 , I delete 6 I respond 5 -1 etc.
I want to do it fast - linear of linear-logarithmic time complexity.
What data structure should I use? I guess the key to the solution is the fact that the sequence is sorted.
A doubly-linked list will do fine.
We will store the links in two arrays, prev and next, to allow O(1) access for deletions.
First, for every element and two sentinels at the ends, link it to the previous and next integers:
init ():
for cur := 0, 1, 2, ..., n, n+1:
prev[cur] := cur-1
next[cur] := cur+1
When you delete an element cur, update the links in O(1) like this:
remove (cur):
print (num (prev[cur]), " ", num (next[cur]), newline)
prev[next[cur]] := prev[cur]
next[prev[cur]] := next[cur]
Here, the num wrapper is inserted to print -1 for the sentinels:
num (cur):
if (cur == 0) or (cur == n+1):
return -1
else:
return cur
Here's how it works:
prev next
n = 6 prev/ print 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
/next ------------------- -------------------
init () -1 0 1 2 3 4 5 6 1 2 3 4 5 6 7 8
remove (2) 1 3 1 3 -1 0 1 3 4 5 6 1 3 4 5 6 7 8
remove (3) 1 4 1 4 -1 0 1 4 5 6 1 4 5 6 7 8
remove (6) 5 7 5 -1 -1 0 1 4 5 1 4 5 7 8
remove (1) 0 4 -1 4 -1 0 4 5 4 5 7 8
remove (5) 4 7 4 -1 -1 0 4 4 7 8
remove (4) 0 7 -1 -1 -1 0 7 8
Above, the portions not used anymore are blanked out for clarity.
The respective elements of the arrays still store the values printed above them, but we no longer access them.
As Jim Mischel rightly noted (thanks!), storing the list in two arrays instead of dynamically allocating the storage is crucial to make this O(1) per deletion.
You can use a binary search tree. Deleting from it is logarithmic. If you want to remove n elements and the number of total elements is m, then the complexity of removing n elements from it will be
nlogm
A matrix of size nxn needs to be constructed with the desired properties.
n is even. (given as input to the algorithm)
Matrix should contain integers from 0 to n-1
Main diagonal should contain only zeroes and matrix should be symmetric.
All numbers in each row should be different.
For various n , any one of the possible output is required.
input
2
output
0 1
1 0
input
4
output
0 1 3 2
1 0 2 3
3 2 0 1
2 3 1 0
Now the only idea that comes to my mind is to brute-force build combinations recursively and prune.
How can this be done in a iterative way perhaps efficiently?
IMO, You can handle your answer by an algorithm to handle this:
If 8x8 result is:
0 1 2 3 4 5 6 7
1 0 3 2 5 4 7 6
2 3 0 1 6 7 4 5
3 2 1 0 7 6 5 4
4 5 6 7 0 1 2 3
5 4 7 6 1 0 3 2
6 7 4 5 2 3 0 1
7 6 5 4 3 2 1 0
You have actually a matrix of two 4x4 matrices in below pattern:
m0 => 0 1 2 3 m1 => 4 5 6 7 pattern => m0 m1
1 0 3 2 5 4 7 6 m1 m0
2 3 0 1 6 7 4 5
3 2 1 0 7 6 5 4
And also each 4x4 is a matrix of two 2x2 matrices with a relation to a power of 2:
m0 => 0 1 m1 => 2 3 pattern => m0 m1
1 0 3 2 m1 m0
In other explanation I should say you have a 2x2 matrix of 0 and 1 then you expand it to a 4x4 matrix by replacing each cell with a new 2x2 matrix:
0 => 0+2*0 1+2*0 1=> 0+2*1 1+2*1
1+2*0 0+2*0 1+2*1 0+2*1
result => 0 1 2 3
1 0 3 2
2 3 0 1
3 2 1 0
Now expand it again:
0,1=> as above 2=> 0+2*2 1+2*2 3=> 0+2*3 1+2*3
1+2*2 0+2*2 1+2*3 0+2*3
I can calculate value of each cell by this C# sample code:
// i: row, j: column, n: matrix dimension
var v = 0;
var m = 2;
do
{
var p = m/2;
v = v*2 + (i%(n/p) < n/m == j%(n/p) < n/m ? 0 : 1);
m *= 2;
} while (m <= n);
We know each row must contain each number. Likewise, each row contains each number.
Let us take CS convention of indices starting from 0.
First, consider how to place the 1's in the matrix. Choose a random number k0, from 1 to n-1. Place the 1 in row 0 at position (0,k0). In row 1, if k0 = 1 in which case there is already a one placed. Otherwise, there are n-2 free positions and place the 1 at position (1,k1). Continue in this way until all the 1 are placed. In the final row there is exactly one free position.
Next, repeat with the 2 which have to fit in the remaining places.
Now the problem is that we might not be able to actually complete the square. We may find there are some constraints which make it impossible to fill in the last digits. The problem is that checking a partially filled latin square is NP-complete.(wikipedia) This basically means pretty compute intensive and there no know short-cut algorithm. So I think the best you can do is generate squares and test if they work or not.
If you only want one particular square for each n then there might be simpler ways of generating them.
The link Ted Hopp gave in his comment Latin Squares. Simple Construction does provide a method for generating a square starting with the addition of integers mod n.
I might be wrong, but if you just look for printing a symmetric table - a special case of latin squares isomorphic to the symmetric difference operation table over a powerset({0,1,..,n}) mapped to a ring {0,1,2,..,2^n-1}.
One can also produce such a table, using XOR(i,j) where i and j are n*n table indexes.
For example:
def latin_powerset(n):
for i in range(n):
for j in range(n):
yield (i, j, i^j)
Printing tuples coming from previously defined special-case generator of symmetric latin squares declared above:
def print_latin_square(sq, n=None):
cells = [c for c in sq]
if n is None:
# find the length of the square side
n = 1; n2 = len(cells)
while n2 != n*n:
n += 1
rows = list()
for i in range(n):
rows.append(" ".join("{0}".format(cells[i*n + j][2]) for j in range(n)))
print("\n".join(rows))
square = latin_powerset(8)
print(print_latin_square(square))
outputs:
0 1 2 3 4 5 6 7
1 0 3 2 5 4 7 6
2 3 0 1 6 7 4 5
3 2 1 0 7 6 5 4
4 5 6 7 0 1 2 3
5 4 7 6 1 0 3 2
6 7 4 5 2 3 0 1
7 6 5 4 3 2 1 0
See also
This covers more generic cases of latin squares, rather than that super symmetrical case with the trivial code above:
https://www.cut-the-knot.org/arithmetic/latin2.shtml (also pointed in the comments above for symmetric latin square construction)
https://doc.sagemath.org/html/en/reference/combinat/sage/combinat/matrices/latin.html
I'm new to julia and I have a problem.
I am working with Julia (Jupyter notebook) and I do not know how can I do column 3 - column 2 and write the result as a new column at the end of the matrix/array2D.
I have tried this:
newCol = array[(1:end),3] - array[(1:end),2]
Any suggestion?
You can subtract the two columns and then concatenate it with the original array using the normal build-an-array syntax:
julia> arr
2x3 Array{Int32,2}:
1 2 3
5 6 7
julia> [arr [arr[:,3] - arr[:,2]]]
2x4 Array{Int32,2}:
1 2 3 1
5 6 7 1
Or use hcat:
julia> hcat(arr,arr[:,3] - arr[:,2])
2x4 Array{Int32,2}:
1 2 3 1
5 6 7 1
(Note that neither of these act in place, so you'd need to assign the result somewhere if you want to use it later.)
http://www.cs.pitt.edu/~kirk/cs1501/animations/Sort1.html is this applet counting right? Selection sort for 5 4 3 2 1, I see 2 swaps, but the applet is counting 4 exchanges....
I guess it's a matter of definition. He is doing a swap in the end of every loop, even if he is swapping one element against itself. In his case, the swaps will be:
Original: 5 4 3 2 1
Swap pos 1 and 5: 1 4 3 2 5
Swap pos 2 and 4: 1 2 3 4 5
Swap pos 3 and 3: 1 2 3 4 5
Swap pos 4 and 4: 1 2 3 4 5
(No swap is done for the last element since that will always be in the correct place)
A simple if statement could be used to eliminate the two last swaps.