I have ruby 2.1.6 and 2.1.7 installed on my PC (Win 7 x64 SP1) and I use uru to switch between them. They work fine.
I also have installed a few Jekyll versions: 2.4.0, 2.5.3, 3.0.2 and 3.1.1. I work with some jekyll projects with no trouble at all.
Now, in order to reproduce a very specific website, I need to create a jekyll new project with a Jekyll specific version.
I tried running uru 216 -> jekyll -v 2.4.0 new project and didn't work. The terminal response is jekyll 3.1.1.
I also tried jekyll new project -v 2.4.0 and didn't work either - the response was new.
Is there a way of doing that?
Or the only way is running jekyll new project then adding a Gemfile specifying the jekyll version, as in:
Gemfile:
source "https://rubygems.org"
gem 'jekyll', '2.4.0'
Then running bundle install and serving jekyll with Bundler via bundle exec jekyll serve?
Or perhaps I'll need to install a third ruby version (like 2.1.8) with just jekyll 2.4.0 to be able to do that?
I know about RVM and it seems it would do the job, but as far as I know I can't use it because it doesn't work on Win.
Any ideas? Thanks in advance!
Create your Gemfile with whatever jekyll version in it
bundle install
bundle exec jekyll new . --force
. means the current folder and --force will create a new jekyll even if the folder is not empty
Im using bundler to install stuff and since I have added Gemfile.lock, travis started to complain with:
Your Gemfile.lock is corrupt. The following gem is missing from the DEPENDENCIES
section: 'echoe'
Of course, everything works locally. It also works using DeployBot. I even installed docker ubuntu and tried, still ok. My Gemfile.lock is not corrupt. Same versions of ruby and bundler is used.
What is going on?
Update
This is something related to bundler version. Im using 1.11.0, but got reports that it worked with eg. 1.8.3. ??
We've seen a very similar issue today on Buildkite due to the recent release of a new bundler version
https://rubygems.org/gems/bundler/versions/1.11.0
We got the build working by stipulating the version of bundler to install.
gem install -v 1.10.6 bundler --no-rdoc --no-ri
and forcing the use of that
bundle _1.10.6_ install
Firstly, remove the gem lock file:
rm -f Gemfile.lock
Then install the dependencies:
bundle install
You can update the dependencies to ensure that you won't get an error:
bundle update
When I try to bundle install I get the following message:
Your Ruby version is 2.0.0, but your Gemfile specified 2.1.0
In my Gemfile I have the following:
ruby '2.1.0'
And when I run ruby -v in the console I get:
ruby 2.1.0p0 (2013-12-25 revision 44422) [x86_64-darwin12.0]
What does Ruby 2.1.0p0 mean? What version should I have in my Gemfile and why does the error tell me I have Ruby version 2.0.0?
Run
gem install bundler
or
gem update bundler
which may fix your problem.
For all new installed versions of Ruby you should update or install a new bundler.
In the top-level directory of your project, create a file named .ruby-version containing (wait for it...)
2.1.0
That apparently is the cross-{rbenv,rvm} way of spec'ing the version now.
For me, none of the answers helped. I fixed it closing and opening again the terminal.
If you get this in a Rails project, and you recently upgraded your Ruby version you might have spring still running with the old version of Ruby.
./bin/spring stop
will fix this.
None of the other suggestions was working for me. On the server, I had to do:
rvm --default use [correct version number]
brew cleanup ruby worked for me as I use HomeBrew to install Ruby.
I recently updated Ruby through HomeBrew but HomeBrew did not remove the older version. brew cleanup ruby will delete the older version of Ruby.
the main reason for this problem is your machine and gemfile using a different ruby version
so there is multiple problems and solutions for this issue you can try the below solutions one by one
1- make sure your machine install and use the same version of your gemfile if your machine not using the same one try to install this version using rvm
$ rvm install ruby_version_you_want
make sure the version installed success by using this command
$ rvm list
and if the new version doesn't set as a default you can set it using this command
$ rvm --default use ruby_version_you_want
you can check the current ruby version
$ rvm current
$ ruby -v
2- if you have the same issue check your bundler
$ gem install bundler
or
$ gem update bundler
3- in some cases spring still using the old version so you need to stop it
$ ./bin/spring stop
4- another case you can type
$ gem pristine --all
and try to install bundle again
5- also in some cases after install the updated ruby version you just need to restart your terminal.
6- another solution but I didn't recommend it the top-level directory of your project, create a file named .ruby-version containing your active running ruby version
7- if you still have this problem try to remove ruby and install the updated version only
$ aptitude purge ruby
If you are using Capistrano you should also check your deploy.rb file for the set :rbenv_ruby configuration.
I got this after upgrading with ruby-install. Fixed this with:
gem install bundler
followed by:
$HOME/.rubies/ruby-2.4.1/bin/bundle
It shouldn't be necessary to specify the path as which bundle indicates it's already using this path. But it gives the version error if running bundle without the path. I don't know why?
Thanks for the info about installing / updating bundler but it didn't work for me.
I had to do rbenv rehash
If you are using rbenv to manage your ruby environments you can run rbenv local 2.1.0 within your project directory to set the version of ruby your gemfile asks for.
NONE of the above answers worked for me, but
$ gem pristine --all
did the trick for me
buona fortuna
I struggled with something very similar, just different versions. I finally fixed it by going to RubyGems and placing the latest version of bundler in my gemfile, which currently is:
gem 'bundler', '~> 2.1', '>= 2.1.4'
There was still an issue, but after that, I ran:
gem update --system
And it resolved the mixed-up versions of Ruby in the rails project folder. You may have to restart the terminal before you do this. Also, I commented out the bundler gem file, it appears the gem update --system command is what really resolved it.
I got it from here:
For more advanced projects .versions.conf is supported, where more than the Ruby version can be specified.
Generating .versions.conf:
rvm --create --versions-conf use 1.9.3#my_app
Example .versions.conf:
ruby=jruby-1.6.8
ruby-gemset=my_app
env-JRUBY_OPTS=--1.9
Make sure your server configuration points to the correct ruby installation.
I had already updated my Ruby version in the .ruby-version file and that didn't fix it. ruby -v also showed the correct version, but I had forgotten to update my server config.
For example, with rbenv, NGINX, and Pushion Passenger I had in my NGINX server block:
passenger_ruby /Users/myusername/.rbenv/versions/2.3.1/bin/ruby;
And I needed to change to...
passenger_ruby /Users/myusername/.rbenv/versions/2.3.3/bin/ruby;
Then restarted NGINX and it worked.
This could happen when you install new version of ruby and update .ruby-version and Gemfile to the new version without doing install all the gems for new version of ruby first. So do the
$ bundle install
and you might as well need to source .profile or restart your shell.
If you are using rbenv just run
rbenv local 2.0.0
Then
bundle install
I opened Gemfile and replaced 2.7.1 with my own version of ruby 2.7.0 Everything is okay right now.
Had the same problem and I'm working with rbenv
Those are the steps that helped me fix my problem:
First in terminal, type which bundle. For me this gave: /usr/local/bin/bundle
Again in terminal try which ruby. In my case this gave: /Users/Mahmoud/.rbenv/shims/ruby
The problem here thus is that bundle isn't using the same ruby version from rbenv. So the path needs fixing. In other words I need to tell my terminal to use the rbenv version of bundle when I use bundle install.
So step 3: For me I personally already had the path set in ~/.bash_profile:
export PATH="$HOME/.rbenv/shims:$PATH"
eval "$(rbenv init -)"
but apparently this was not enough as I was using zsh. Had to add those same 2 lines to ~/.zshrc as well.
Restart terminal
Now bundle install is working as expected and which bundle gives:
/Users/Mahmoud/.rbenv/shims/bundle
indicating that the problem was just that bundle was using the wrong ruby.
So if you have this problem, just make sure ~/.bash_profile and ~/.zshrc have the correct path by adding the 2 lines indicated above. If this didnt work take a deep dive into paths to make sure that before starting which bundle gives the equivalent of:
/Users/Mahmoud/.rbenv/shims/bundle
Had the same error. Doing the following fixed it. I was using ruby 2.5.5 and rbenv. Upgraded from 2.5.1.
rbenv rehash
gem uninstall bundler
gem install bundler
gem install bundler:1.17.3 (my app needed specific bundler -v 1.17.3)
gem install rails
I solved this problem by updating my ruby version to ruby '2.4.0'
Then bundle install
Simply closing the terminal I was working on and opening a new one worked for me. Sometimes, updates are not effected immediately until a session is closed. I have found this as the case with many rails errors I faced.
I clean and install with that:
sudo gem pristine --all
and install again:
bundle install
I face the error msg
Your Ruby version is 2.5.1, but your Gemfile specified 2.3.0
and solved by the following steps:
open Gemfile which located at your directory.
change ruby '2.3.0' to ruby '2.5.1' and save the Gemfile
go back to items and run bundle update.
the issue is perfectly solved.
I was having issues with RVM so I tried to uninstall everything (Ruby, RVM and Rails) and start fresh.
I installed Ruby 1.9.2 and Rails 3.1.2 rc2 and I am working on Ubuntu 10.0.4. If I do ruby -v from the command prompt I am able to see the ruby version installed and same is true for rails -v.
However once I get into the application directory which and try to check rails -v I get this error
"Could not find rake-0.9.2 in any of the sources
Run bundle install to install missing gems."
If I do bundle install I am getting this error
"bash: /usr/bin/bundle: /usr/bin/ruby1.8: bad interpreter: No such file or directory"
Nothing seems to work and I am stuck in this recursive loop of uninstalling and installing.
Everything was working fine till I got an error linecache19 which requires Ruby >=1.9.2 (I was using 1.8.7 earlier). I installed RVM and Ruby 1.9.2, I had to uninstall RVM and 1.8.7 and I tried to install to install Ruby 1.9.2 as a standalone package. This obviously didn't work.
Please HELP!!
If you have uninstalled a previously installed Ruby version (in my case it was Ruby 1.8.7) and try to install latest Ruby version (I was trying to install 1.9.2) without using RVM. I manually deleted all the version of Ruby present by searching $whereis ruby from my command prompt.
After that I installed a ruby1.9.2. In my existing rails application I was getting lot of errors because the application creates a reference to the earlier installed ruby version (1.8.7) and try to find gems in the earlier installed location.
SO once you have installed a new version and want to run the earlier developed application search where your application is referencing the older version of ruby.
In my case I had to change the path in script/rails from #!/usr/bin/env to #!/usr/local/bin/ruby .
You might also have to add the path of the latest Ruby which you have installed in path variables.
I'm trying crazily to install omniauth on Ubuntu 8.04.4.
I keep getting the following error:
ERROR: Error installing omniauth:
net-ldap requires Ruby version >= 1.8.7.
So I updated to Ruby1.9 but still the error persists. Any idea of why this is happening?
I thought ruby1.8.7 was a minor release, so best practice would suggest moving to Ruby1.9. Further, and more to the point, I can't find a copy of Ruby1.8.7 anywhere.
EDIT:::::::::::::::
I purged the gems and uninstalled ruby. Then found a version ruby1.8.7, compiled and installed and now it works great.
Cheers,
Slotishtype.
I guess since you have "updated" and not removed the old Ruby version, the gems would be installed to old path where the old Ruby version was installed.
You can verify the same using the command
gem env
in the terminal. And following the path to where your gems are currently installed.
Also you can check if you have the correct ruby version installed as per your requirement with
ruby -v
Try removing the old version and then installing a fresh version of Ruby.
You would find Ruby 1.8.7 from http://www.ruby-lang.org/en/downloads/.
Good Luck!!
Hope it helps.