I want to execute linter only on staged files.
For this i wrote inside package.json the command(inside scripts):
"fix-lint": "tslint $(git diff --name-only --staged) "
Execute it:
npm run fix-lint
I have an error:
error: unknown option --name-only
I tried to figure out and try simple command:
"lss": "echo $(ls)"
And again execute it:
npm run lss
The result is printing $(ls) instead of printing all files in directory.
My question is how to fix this commands/scripts?
Or maybe in general how execute bash Command Substitution in npm script.
Thanks in advance.
Related
The following simple script is apparently not so simple.
The entire script appears to work properly until I get to the npm command.
I have looked at the numerous threads here, but none of the solutions fix the issue.
Each of the scripts is kicked off by a parent script.
Here is the parent:
#!/bin/bash/
authGogglesPath='/c/sandBox/amazon-sandbox/CraigMonroe/platform.shared.auth-goggles'
echo $'\nExecuting node commands for local running solution...\n'
#echo $(pwd)
# run the scripts
bash edge.sh ${edgePath} &
exec bash
I checked my path in the terminal and it's aware
I thought that it might be running as another associated profile so I tried the full path to npm, but the same results.
#!/bin/bash/
authGogglesPath='/c/sandBox/amazon-sandbox/CraigMonroe/platform.shared.auth-goggles'
echo $'\nExecuting node commands for local running solution...\n'
#echo $(pwd)
# run the scripts
bash edge.sh ${edgePath} &
exec bash
That calls edge.sh with a string path for arg (more for later)
edge.sh is another simple script
#!/bin/bash/
PATH=$1
#echo $PATH
if [ -z "${PATH}" ] ; then
"PATH is empty! Aborting"
exit 1
fi
cd "${PATH}"
echo $'\nExecuting Edge...\n'
npm run dev
Each time I run this I'm receiving:
$ bash edge.sh /c/sandBox/amazon-sandbox/CraigMonroe/platform.shared.auth-goggles/
Executing Edge...
edge.sh: line 13: npm: command not found
cmonroe#LP10-G6QD2X2 MINGW64 ~/cruxScripts
$
When in the terminal and manually navigating to the directory and running the command it works properly. Where the edge builds and starts.
Unless npm is in /c/sandBox/amazon-sandbox/CraigMonroe/platform.shared.auth-goggles/, doing PATH=$1 means your PATH only refers to that one folder.
No more /usr/bin or any other folders your bash session might need.
As commented, adding to the PATH should work
PATH="$1:${PATH}"
Consider the following npm scripts.
$ npm run
available via `npm run-script`:
make
OUTPUT=dist/main.js bash -c 'elm make src/Main.js --output=$0 $1'
make:dev
npm run make -- '$OUTPUT' --debug
make:prod
npm run make -- '>(npm run uglify -- $OUTPUT)' --optimize
uglify
uglifyjs --compress 'pure_funcs="F2,F3,F4,F5,F6,F7,F8,F9,A2,A3,A4,A5,A6,A7,A8,A9",pure_getters,keep_fargs=false,unsafe_comps,unsafe' | uglifyjs --mangle --output=
I'd like to use it as follows:
$ npm run make -- '$OUTPUT' '--debug'
> experiment#0.1.0 experiment /Users/Adit/experiment
> OUTPUT=dist/main.js bash -c 'elm make src/Main.js --output=$0 $1' '$OUTPUT' '--debug'
This would correctly create the debug build of the Elm application. However, this is not what happens. Instead of using single quotes, npm run uses double quotes:
$ npm run make -- '$OUTPUT' '--debug'
> experiment#0.1.0 experiment /Users/Adit/experiment
> OUTPUT=dist/main.js bash -c 'elm make src/Main.js --output=$0 $1' "$OUTPUT" "--debug"
Due to this the output is not what I expect it to be. What's the best way to resolve this issue without writing a custom shell script? I want to use the OUTPUT variable in two different commands. However, I only want to define it in one place.
I solved the problem as follows.
{
"config": {
"input": "src/Main.elm",
"output": "dist/main.js"
},
"scripts": {
"make": "elm make $npm_package_config_input --output $npm_package_config_output",
"make:dev": "npm run make -- --debug",
"make:prod": "npm run make -- --optimize",
"postmake:prod": "uglifyjs $npm_package_config_output --compress 'pure_funcs=\"F2,F3,F4,F5,F6,F7,F8,F9,A2,A3,A4,A5,A6,A7,A8,A9\",pure_getters,keep_fargs=false,unsafe_comps,unsafe' | uglifyjs --mangle --output=$npm_package_config_output"
}
}
Hence, if you have a configuration variables that you'd like to use in multiple npm scripts, you can add them to the config dictionary of package.json. After that, you can access them as environment variables in the npm scripts via the name $npm_package_config_<name> where <name> is the name of your config variable.
I also used a post script instead of process substitution to uglify the output of the Elm compiler. Doing so was overall less of a hassle than using process substitution via bash -c.
Finally, you can run make, make:dev, or make:prod for different builds. The first one is a regular build. The second one is a development build with the Elm debugging tools. The third one is a regular build which is optimized and minified for production use.
I have created a bash script to automate the git release flow. This script takes one or multiple branch names as argument.
I can call the script in the terminal with: ./releaseGit.sh -b branch1 -b branch2
But I want to use the script with npm. My current package.json contains:
"scripts": {
(other scripts..)
"git-release": "scripts/releaseGit.sh -b $*"
}
But with this configuration I can only pass one branch as argument to the script. How can I change that?
works:
npm run git-release -b only-one-branch
Doesn't work:
npm run git-release -b first-branch -b second-branch
Package.json:
scripts: {
test: "sh init.sh"
}
Pass args:
npm run test -- a b c
I have a nodejs javascript project, but I would like to set a bunch of environment variables locally. created a bash file that just exports some variables:
#!/usr/bin/env bash
export waka=flaka
export fat=booty
When I use the dot to source and run the file from the command line it works fine:
. ./env.sh
And I can see the variable has been set
echo $waka # prints "flaka"
But then I try to take this command and make it an npm script by adding it to my package.json
scripts: {
"set-env": ". ./env.sh",
...
}
and then run it:
npm run set-env
The script is run but the environment variables are not saved:
echo $waka # prints undefined (assuming you didn't already run it from command line)
So, I'm wondering why it doesn't save the envrionment variables as an npm script and if it's possible to run the bash script from an npm script in a way such that the environment variables will be saved for the rest of the command prompt session. Thanks!
npm is not a shell command; it runs in a separate process that forks another shell in order to run the command specified by set-env. env.sh is executed, but then that shell immediately exits, at which point the changes are gone (and then npm itself exits).
I'm running npm on Windows and would like to use & style parallel operations in run-scripts
but running in parallel in cmd is kind of messy
in my package.json file I'd like to write-
scripts: { "go": "cmd1 & cmd2"}
but npm executes the script under cmd.exe which does not know about ; I could change this to
scripts: { "go": "bats/bat1.bat") where bat1.bat is a cmd bat file that uses the windows style call or start commands to run commands in parallel. which works but gives me a script that only works on Windows.
It would be a lot simpler if I could get npm to run the script under a bash clone or cygwin.
I tried
config: { "shell": "bash"}
but that still ran cmd.exe
Is there any way to tell npm to run-scripts using a specific shell (not cmd.exe)?
Since npm 5.1
npm config set script-shell "C:\\Program Files (x86)\\git\\bin\\bash.exe"
or (64bit installation)
npm config set script-shell "C:\\Program Files\\git\\bin\\bash.exe"
Note that you need to have git for windows installed.
You can revert it by running:
npm config delete script-shell
Here's one way to do it:
Create a script, such as my_script.sh, in your project bin directory.
In your package.json file, add a line to run the script using bash. For example:
"scripts": {
"boogie": "bash bin/my_script.sh"
}
Now you can run your bash script from npm by:
npm run-script boogie
Not very elegant, but it works.
If you are developing in both Windows and Linux/Unix, then at least this approach is fairly portable to both environments.
Ideally, overriding the npm shell config parameter should work, but npm (at least version 1.4.14) seems in Windows to ignore the setting and use cmd.exe instead.
Use the following command in your bash or Git Bash shell to find out the shell setting:
$ npm config ls -l | grep shell
By default, the output will be:
shell = "C:\\WINDOWS\\system32\\cmd.exe"
However, to override the default shell parameter, you can add (or edit) an npmrc file to the \Users\yourusername\AppData\Roaming\npm\etc directory. Just add the following line:
shell = "C:\\Program Files (x86)\\git\\bin\\bash.exe"
The path you use can be any valid path to bash.exe. Now, if you run the above "npm config ls -l | grep shell" command, you will see the following output, indicating that the shell parameter has been overriden:
shell = "C:\\Program Files (x86)\\git\\bin\\bash.exe"
; shell = "C:\\WINDOWS\\system32\\cmd.exe" (overridden)
One day, perhaps, a new version of npm will pay attention to the overridden shell parameter.
You can also use cross-platform powershell https://github.com/powershell/powershell#get-powershell for npm scripts.
To set for single project, run this from project root folder:
npm config set script-shell pwsh --userconfig ./.npmrc
To globally set for all node projects:
npm config set script-shell pwsh [--global]
just using CMD's way to run .bat!
.json
"scripts": {
"start": "react-scripts start",
"build": "react-scripts build",
"test": "react-scripts test --env=jsdom",
"eject": "react-scripts eject",
"app": "cd build & browser-sync start --server --files 'index.html'",
"bat": "start start-browser.bat",
"starts": "start http://localhost:7777/datas/ && start http://localhost:7777/Info/"
},
.bat
start http://localhost:7777/datas/ && start http://localhost:7777/Info/
Use a specifically created node_module for this purpose. I suggest using npm-run-all, but others exists, such as parallelshell.
Parallelshell example is below for drop-in-replacement for your question.
"scripts": {
"parallelexample1": "parallelshell \"echo 1\" \"echo 2\" \"echo 3\""
},
following command:
npm run parallelexample1
works both on windows and unix(Linux/MacOS).
Interestingly npm-run-all does not support shell commands; therefore we need to put all shell commands to separate scripts like below.
"scripts": {
"parallelexample2": "npm-run-all echo*",
"echo1": "echo 1",
"echo2": "echo 2",
"echo3": "echo 3"
},
Following command:
npm run parallelexample2
works both on windows and unix(Linux/MacOS).
In my case I just needed to run npm start from inside Bash. I run cmd then I open bash by running "c:\Program Files\Git\bin\bash.exe". Under bash shell I then was able to call npm build and npm start succesfully.
You may already have bash if you are using Git. If not, you can install it.
Hope this may save someone's time.