Im trying to find view ID to edit it. I know about developer options, but in this case it is not working...
Odoo v12 community version. Trying to edit a view adding a new customer, when adding a followers into task in project module.
Tried to find it in technical -> views but without success
More details - short video showing my problem.
https://www.youtube.com/watch?v=q-oO7upPvto&feature=youtu.be
Beforehand: it is the view base.view_partner_simple_form.
How to find out? Yes, Odoo's debug mode is not helping that much here. But you can use it to find out what model is behind a field where you used "Create and Edit" context menu. In this case it's the model res.partner.
And from there you have to do a detective's work, or a bit like that. Just switch to the views list in technical and search for form views for model res.partner without a parent (base views not inheriting from other views). You will find 5-6 views and have to look into them one by one to find the right one.
For this case that is pretty simple, because there is only one view for res.partner model with so less fields in it.
Related
Recently I was asked what is the relationship between the Model/Controller/View in MVC pattern by my colleague. But unfortunately I think I didn't give a good explanation to him. So I search it in the google . and found most of diagrams put like this below.
Actually some parts of them I am not sure if I understand well. Please help to review it.
Controller is responsible for updating the Model.(Controller->Model)
Model can apply the change to the View when it is changed. and view can apply the change to the Model if the binding value from the Model is changed in the view.(Model<->View)
The view can accept the user actions so that sumbit all the UI inputs to Controller.(View->Controller)
The controller would determine the which view can be display based on the User Actions.(Controller->View)
Thanks.
I have been following this guide to successfully create a Joomla custom component: http://docs.joomla.org/J2.5:Developing_a_MVC_Component/Introduction
For simplicity's sake lets say I have two tables, one for authors and one for books.
--AUTHORS--
ID
Name
--BOOKS--
ID
Name
Author_reference
Both have two views each, one list view and one edit view. When I click on a author in the list view it takes me to the list view of the books to see what books the author has written, and only those books filtering out the others.
Here the problem start, when I click on the New button in Joomla I want to add a book to that specific author, but have no way to set that reference. So far I have set that reference with a Session variable when clicking the author but that has obvious flaws such as opening another author in a new tab changing the Session variable.
EDIT: Looks like my question was not very specified. I need a way to send a parameter/variable when clicking the "New" button in admin mode in my component.
You can see a good tutorial for this on another question that I answered: How to add a link category_id added to the admin (JToolBarHelper::addNew)? - Joomla 2.5
Basically, joomla has two functions that you can set in the controller for that view to facilitate adding items to the url even through it's redirects as part of the loading, checking out, and save process.
You can build that with the "foreign key" or "category field" functionality in the Joomla Component Creator. It will save you a lot of headake. Give it a try.
I have a section that contains a subform ( containing 3 editable fields for the user ).
Then I have an embedded view categorized having two actions: Add and Trash.
What i want to do: After the user complete the 3 fields and then press Add, the first row in the embedded view will appear. ( This easy thing I did ). But then after the first click on Add, I want that all the 3 fields to be refreshed, all of them to have as their value: "".
After, if the user wants to add another row into the embedded view (with different values), in my case it is overwrited on the 1st row. I want to be separate rows in order.
I tried something with #Command(ViewRefreshFields) into the Add action code but I didn't make it to work. Please help, J. U.
Jazir, I'm guessing that you also go by the names "Florin G Mihalache", "Josh Mitchell" and "Yveniss Ltoreau", and I've been following the development of your application along with many other professional Notes developers.
I really think you need to go back to the very first basics, and work out the difference between forms, subforms, documents, views, embedded views, and other important components of Lotus Notes databases.
I strongly suspect that for a couple of weeks you have been trying to use a form to create other documents, via a subform, to be displayed in an embedded view in that form, when what you should be using is just a view, and documents. Perhaps you might need to use pages, outlines and framesets. It is very important that you understand these basic concepts before confusing the people who have tried to help you, to whom you may have lied.
I have voted your question down, not just because you have shown a lack of research, but because you appear to keep switching ID when people lose patience with you. I will undo that vote if I become convinced that you are not Florin.
The documents displayed in an embedded view are controlled by the view's selection formula. You haven't shown that. You haven't shown your code in the Add button. You haven't shown what properties you have set on the embedded view -- e.g., show single category. So you're not giving us quite enough info to diagnose your problem and help you.
But in general, I think that if you want to control the order of insertion of individual documents into an embedded list, perhaps using an embedded folder would be a better idea than an embedded view.
I'm curious to know how to create the sidebar used in twitter and many other Apps
What i'm asking for is not about graphics, but i'd like to know which is the better way to create a structure to permit switching between different sections.
I don't like asking for help without start by an opinion, thus, this is mine:
Generic view structure would be created with a NSSplitView
I Need a generic Model class managing sections and taking a pointer to the current one.
Here i'd add informations about image used for any section etc... (something like a custom UITabBarController for iOS.
The Left view of the split View would be connected to the generic Model and would be able to present its section and get the current one. Pushing a button will ask the generic Model to change the current section and load content in the Right view (some doubts about this use a Model that way :P probably not the better one)
The Right view loads other view controller as requested by left View (i have may doubts about how do that!)
I'm on the right way ? how would you build a structure like that of Twitter ?
(Off topic: I'd really appreciate correction of my terrible English to keep this question suitable for all users)
Here's what you need https://github.com/erndev/EDSidebar
That's pretty much how I would do it although what you call a "generic model" object, I would call a controller (because it fits in the controller part of MVC).
The right view would be a Tab View with the style set to "tabless" so you don't get the selection buttons at the top and the individual views within the tab view would be selected by the controller using -selectTabViewItemWithIdentifier:
That's how I would do it anyway.
I have created a Sample Module (Admin Side) in Magento.. I managed To created a form and Then Stored the form field values in Database. Now I am trying To create a search view for that. to show me all the values which i have stored in my table. however i am not able to get it. when i press the tab I directly get the form view. I want the search view first and a button there which ll direct me to this form. I want it the same way as it is for product, category or any other module. Do anyone Know How can I do it.
It's called a grid. The process is kind of long to explain here, but if you search online there are a few tutorials that explain how to do it (here's one that I found useful: http://www.webspeaks.in/2010/08/create-admin-backend-module-in-magento.html). Keep in mind that you can also model your own code after core code. If you want to make a grid like the Category grid, then go look in the code how its made.