Every week, I have to take the backup of all the project files from SVN and put into my system and remove the write permission for everyone. So that it won't be changed accidentally in local system.In the next time, I have to delete these files and make a fresh copy from SVN. I am trying to automate this. I wrote a bat file for this. The code is below
::#echo off
set folder="d:/delete_It"
set user[0]="username#My_Company_WebSite.com"
set user[1]="BLRTESLTP-username\Administrators"
set user[2]="Everyone"
set user[3]="domain\user"
set user[4]="everyone"
set user[5]="Authenticated Users"
set user[6]="NT AUTHORITY\Authenticated Users":
set user[7]="My_Company_Network\username"
set user[8]="BUILTIN\Administrators"
set user[9]="NT AUTHORITY\Authenticated Users"
set user[9]="BUILTIN\Users"
icacls %folder% /T /grant %user[2]%:(OI)F
icacls %folder% /T /grant %user[2]%:(OI)W
cd /d %folder%
rm -r -f /Q *.*
del *.* /F /Q
set svn="svn_Address"
svn checkout %svn% %folder%
icacls %folder% /T /deny %user[2]%:(OI)(CI)W
Now the problem is even though I am removing the Write permission only, I couldn't open the folder "d:\delete_It". It is showing that I am not having permission to open the folder.The screenshot is below.
I opened the command prompt with admin privileges, and ran the script. But the effects were same.Can anybody say what is wrong? And how to achieve this?
Note: I am using "Windows 10 Pro" 64-bit OS
I have a batch script in Windows7 to update the hosts file that fails.
I am logged as a user with administrative rights.
Even if I run the script with the "Run as administrator" option I get Access denied. 0 files copied when executing this part of the script:
for /f "tokens=1-2 delims=:" %%a in ('ipconfig^|find "IPv4"') do set ip=%%b
set ip=%ip:~1%
REM create changing part of hosts file...
if exist %temp%\temp.txt del %temp%\temp.txt
echo %ip% myproxy >> %temp%\temp.txt
REM check this...
set hostpath=C:\WINDOWS\system32\drivers\etc
REM add static part of hosts file
type "%hostpath%\hosts-static" >> %temp%\temp.txt
REM replace hosts file
copy /y %temp%\temp.txt "%hostpath%\hosts"
ipconfig /flushdns
netsh interface IP delete arpcache
pause
I also tried to create a shortcut and set the "Advanced -> Run as Administrator" option but no luck.
If I open a cmd shell as Administrator and then run the script from there everything works fine, but no way of running it directly double-clicking on the file (or its link).
Any idea?
EDIT:
added the whole script.
I tried creating a shortcut for the following command to execute as Administrator
C:\Windows\System32\cmd.exe /c script.bat
and it is also failing.
From the same shortcut (without arguments) I can open a window where I can execute the batch correctly. I really cannot see why.
Obviously a late response, but just solved this issue with a very straightforward solution so I thought I'd share:
Using ICACLS you can modify access control lists (ACLs) to bypass access denied errors.
Run the following command:
ICACLS C:\path\to\batch\file\directory\* /C
the parameter /C tells the batch file to bypass access denied errors. Cheers.
Try attrib -r -s -h -a "%hostpath%\hosts" before your copy command. If any file is attributed +r, +s, or +h, you'll get "Access is denied" if you try to overwrite it using copy.
There is a folder named Recycler in the directory of my external hard drive and it has a subfolder named cvx which I cannot delete it. I used cmd to do this. I wanted to change it using attrib -h -s /d /s, but it reported Access Denied -L:\Recycler\cvx, I also tried to delete it using del cvx, but it couldn't be done. Could you help me with this?
Thank you in advance.
Access Denied sounds like a permissions issue.
takeown /f L:\Recycler /r /d y
icacls L:\Recycler /grant administrators:F /t
rd /s/q "L:\Recycler\cvx"
You could try to change the access permissions using the dialog in windows explorer
Right-click a file or folder > properties
Open "security" tab
Click edit button
Click on current user's name
Ensure "full control" "allow" box is checked
Click "ok"
Click "ok"
Attempts to delete should be made easier by that.
How to in XP from command line create folder/file and after that allow everything to everyone permissions ? I tried from properties, I deselect readonly but when I open properties again for that folder/file it is always READONLY.
You have to use "CACLS".
Use CACLS /help to have the documentation.
Here 2 exemples:
To give the full right to the user "user1" to the directory
CACLS c:\directory /E /T /C /G "user1":F
To give the full right to the user "user1" to the content of the directory
CACLS c:\directory\*.* /E /T /C /G "user1":F
CACLS /help:
NOTE: Cacls is now deprecated, please use Icacls.
To give the full right to the user "user1" to the directory (Nicolas' example converted):
Icacls c:\directory /T /C /grant "user1":F
How can I grant permissions to a user on a directory (Read, Write, Modify) using the Windows command line?
As of Vista, cacls is deprecated. Here's the first couple of help lines:
C:\>cacls
NOTE: Cacls is now deprecated, please use Icacls.
Displays or modifies access control lists (ACLs) of files
You should use icacls instead. This is how you grant John full control over D:\test folder and all its subfolders:
C:\>icacls "D:\test" /grant John:(OI)(CI)F /T
According do MS documentation:
F = Full Control
CI = Container Inherit - This flag indicates that subordinate containers will inherit this ACE.
OI = Object Inherit - This flag indicates that subordinate files will inherit the ACE.
/T = Apply recursively to existing files and sub-folders. (OI and CI only apply to new files and sub-folders). Credit: comment by #AlexSpence.
For complete documentation, you may run "icacls" with no arguments or see the Microsoft documentation here and here
You can also use ICACLS.
To grant the Users group Full Control to a folder:
>icacls "C:\MyFolder" /grant Users:F
To grant Modify permission to IIS users for C:\MyFolder (if you need your IIS has ability to R/W files into specific folder):
>icacls "C:\MyFolder" /grant IIS_IUSRS:M
If you do ICACLS /? you will be able to see all available options.
Open a Command Prompt, then execute this command:
icacls "c:\somelocation\of\path" /q /c /t /grant Users:F
F gives Full Access.
/q /c /t applies the permissions to subfolders.
Note: Sometimes "Run as Administrator" will help.
Use cacls command. See information here.
CACLS files /e /p {USERNAME}:{PERMISSION}
Where,
/p : Set new permission
/e : Edit permission and kept old permission as it is i.e. edit ACL instead of replacing it.
{USERNAME} : Name of user
{PERMISSION} : Permission can be:
R - Read
W - Write
C - Change (write)
F - Full control
For example grant Rocky Full (F) control with following command (type at Windows command prompt):
C:> CACLS files /e /p rocky:f
Read complete help by typing following command:
C:> cacls /?
I try the below way and it work for me:
1. open cmd.exe
2. takeown /R /F *.*
3. icacls * /T /grant [username]:(D)
4. del *.* /S /Q
So that the files can become my own access and it assign to "Delete" and then I can delete the files and folders.
Corrupt Permissions: Regaining access to a folder and its sub-objects
Although most of the answers posted in reply to the question have some merit, IMHO none of them give a complete solution. The following (might be) a perfect solution for Windows 7 if you are locked-out of a folder by corrupted permission settings:
icacls "c:\folder" /remove:d /grant:r Everyone:(OI)(CI)F /T
For Windows 10 the user/SID must be specified after the /remove:d option:
icacls "c:\folder" /remove:d Everyone /grant:r Everyone:(OI)(CI)F /T
.
Notes:
The command is applied to the specified directory.
Specifying the user "Everyone" sets the widest possible permission, as it includes every possible user.
The option "/remove:d" deletes any explicit DENY settings that may exist, as those override explicit ALLOW settings: a necessary preliminary to creating a new ALLOW setting. This is only a precaution, as there is often no DENY setting present, but better safe than sorry.
The option "/grant" creates a new ALLOW setting, an explicit permission that replaces (":r") any and all explicit ALLOW settings that may exist.
The "F" parameter (i.e. the permission created) makes this a grant of FULL control.
The "/T" parameter adds recursion, applying these changes to all current sub-objects in the specified directory (i.e. files and subfolders), as well as the folder itself.
The "(OI)" and "(CI)" parameters also add recursion, applying these changes to sub-objects created subsequently.
.
ADDENDUM (2019/02/10) -
The Windows 10 command line above was kindly suggested to me today, so here it is. I haven't got Windows 10 to test it, but please try it out if you have (and then will you please post a comment below).
The change only concerns removing the DENY setting as a first step. There might well not be any DENY setting present, so that option might make no difference. My understanding is, on Windows 7, that you don't need to specify a user after /remove:d but I might be wrong about that!
.
ADDENDUM (2019/11/21) -
User astark recommends replacing Everyone with the term *S-1-1-0 in order for the command to be language independent. I only have an English install of Windows, so I can't test this proposal, but it seems reasonable.
I struggled with this for a while and only combining the answers in this thread worked for me (on Windows 10):
1. Open cmd or PowerShell and go to the folder with files
2. takeown /R /F .
3. icacls * /T /grant dan:F
Good luck!
With an Excel vba script to provision and create accounts. I was needing to grant full rights permissions to the folder and subfolders that were created by the tool using our administrators 'x' account to our new user.
cacls looked something like this:
cacls \FileServer\Users\Username /e /g Domain\Username:C
I needed to migrate this code to Windows 7 and beyond. My solution turned out to be:
icacls \FileServer\Users\Username /grant:r Domain\Username:(OI)(CI)F /t
/grant:r - Grants specified user access rights. Permissions replace previously granted explicit permissions. Without :r, permissions are added to any previously granted explicit permissions
(OI)(CI) - This folder, subfolders, and files.
F - Full Access
/t - Traverse all subfolders to match files/directories.
What this gave me was a folder on this server that the user could only see that folder and created subfolders, that they could read and write files. As well as create new folders.
Just in case there is anyone else that stumbles on this page, if you want to string various permissions together in the one command, I used this:
icacls "c:\TestFolder" /grant:r Test_User:(OI)(CI)(RC,RD,RX)
Note the csv string for the various permissions.
XCACLS.VBS is a very powerful script that will change/edit ACL info. c:\windows\system32\cscript.exe xcacls.vbs help returns all switches and options.
You can get official distribution from Microsoft Support Page
Bulk folder creation and grant permission works me by using the below powershell script.
Import-Csv "D:\Scripts\foldernames.csv" | foreach-object {
$username = $_.foldername
# foldername is the header of csv file
$domain = “example.com”
$folder= "D:\Users"
$domainusername = $domain+“\”+$username
New-Item $folder\$username –Type Directory
Get-Acl $folder\$username
$acl = Get-Acl $folder\$username
$acl.SetAccessRuleProtection($True, $False)
$rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Administrators","FullControl", "ContainerInherit, ObjectInherit", "None", "Allow")
$acl.AddAccessRule($rule)
$rule = New-Object System.Security.AccessControl.FileSystemAccessRule("SYSTEM","FullControl", "ContainerInherit, ObjectInherit", "None", "Allow")
$acl.AddAccessRule($rule)
$rule = New-Object System.Security.AccessControl.FileSystemAccessRule("$domain\Domain Admins","Read", "ContainerInherit, ObjectInherit", "None", "Allow")
$acl.AddAccessRule($rule)
$rule = New-Object System.Security.AccessControl.FileSystemAccessRule($domainusername,"Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$acl.AddAccessRule($rule)
Set-Acl $folder\$username $acl
}
Note: You have to create same domain username in csv file otherwise you will get permission issues
attrib +r +a +s +h <folder name> <file name> to hide
attrib -r -a -s -h <folder name> <file name> to unhide
excellent point Călin Darie
I had a lot of scripts to use cacls I move them to icacls
how ever I could not find a script to change the root mount volumes example: d:\datafolder. I finally crated the script below, which mounts the volume as a temporary drive then applies sec. then unmounts it. It is the only way I found that you can update the root mount security.
1 gets the folder mount GUID to a temp file then reads the GUID to mount the volume as a temp drive X: applies sec and logs the changes then unmounts the Volume only from the X: drive so the mounted folder is not altered or interrupted other then the applied sec.
here is sample of my script:
**mountvol "d:\%1" /L >tempDrive.temp && FOR /f "tokens=*" %%I IN (tempDrive.temp) DO mountvol X: %%I
D:\tools\security\icacls.exe %~2 /grant domain\group:(OI)(CI)F /T /C >>%~1LUNsec-%TDWEEK%-%TMONTH%-%TDAY%-%TYEAR%-%THOUR%-%TMINUTE%-%TAM%.txt
if exist x:\*.* mountvol X: /d**
I am Administrator and some script placed "Deny" permission on my name on all files and subfolders in a directory. Executing the icacls "D:\test" /grant John:(OI)(CI)F /T command did not work, because it seemed it did not remove the "Deny" right from my name from this list.
The only thing that worked for me is resetting all permissions with the icacls "D:\test" /reset /T command.
navigate to top level directory you want to set permissions to with explorer
type cmd in the address bar of your explorer window
enter icacls . /grant John:(OI)(CI)F /T where John is the username
profit
Just adding this because it seemed supremely easy this way and others may profit - all credit goes to Călin Darie.
When I ran the command:
icacls "c:/path/to/folderA/folderB" /grant:r Everyone:(OI)(CI)F /T
None of the files in folderB were being processed, which was indicated via the output message:
Successfully processed 0 files; Failed processing 0 files
However, once I changed the specified path to the parent directory("c:/path/to/folderA") and re-ran the command all the files in folderB were successfully processed.
Note: If you want any other files/folders in folderA to not be processed, try moving all those files/folders to a different location before running the command above.
Hope this helps anyone running into the same issue.
i was not able to open any file in a drive, this command unlocked all -
icacls i:\* /grant Users:F /t /q /c
in windows 10 working without "c:>" and ">"
For example:
F = Full Control
/e : Edit permission and kept old permission
/p : Set new permission
cacls "file or folder path" /e /p UserName:F
(also this fixes error 2502 and 2503)
cacls "C:\Windows\Temp" /e /p UserName:F
This is what worked for me:
Manually open the folder for which the access is denied.
Select the Executable/application file in that folder.
Right-click on it and go to Properties -> Compatibility
Now see the Privilege Level and check it for Run As Administrator
Click on Change Settings for all users.
The problem is solved now.