So I'm trying to run my fuchsia emulator but I keep running into the same problem. I'm running on a Virtualbox VM of Ubuntu v20.04. I set up and built core.qemu-x64 according to the getting started instructions on fuchsia.dev website. However, whenever I run fx vdl start -N while in the fuchsia directory I just get "[info] Waiting for emulator to start..." which it repeats endlessly. Looking at the logs it shows the error message "Reading sdk version errored: No such file or directory (os error 2)". This seems like why the emulator is failing to start. Looking online it seems to be a problem with how this version of Ubuntu resolves certain imports.
Is there a way I can start the emulator that would tell me what file(s) this error is coming from so I can manually resolve it? Otherwise, is there another solution that could fix this issue?
Thank you for any input, please let me know if I can provide any additional information.
Below is a screenshot of the output:
Edit:
I tried fx qemu -kN and got this output but no change to the original start behaviour:
I also tried fx emu and got this output, still no change to the original start:
So I was able to resolve it eventually and first of all, I'd recommend increasing the allocated RAM of your VM. I went from 2GB to 7GB and I'm pretty sure that resolved part of it. Then continue with Marco's recommendations. The command fx qemu -N (or fx qemu -Nk if you have kvm enabled) seemed to do it for me. After I ran that I got another error message with a different command to run. Once I ran that new command and reran fx qemu -N it seemed to start working. Finally opening another terminal and starting fuchsia with fx vdl start -N made the emulator start up just fine. Thanks for the help everyone!
Related
Today I got this error message:
"WSL not found at: C:\Users\Nick\AppData\Local\Microsoft\WindowsApps\debian.exe"
Before this message today, everything worked fine (I start Debian through start menu, restart the ssh service, then start CLion and it linked up just fine.).
The executable is there, just 0kb. The strange thing is that the Linux environment can be opened from windows as always (debian), I can ssh into it just fine (looks like CLion can as well, see picture).
This happened after an update tot CLion 2018.2.2 from 2018.2.1. Rolling back did not fix the issue.
What could be going wrong here?
I've found a fix for the issue. In Windows config select the apps list, find Debian and press advanced settings. Then end the service and recover it (the mild recovery was enough for my case). Although I'm not certain it aided in fixing the issue I've also removed the Jetbrains folder in the LocalCache/Local folder of the Debian folder in my AppData\Local\Packages.
I would like to build/launch the VSCode source code in the native Bash for Windows client. I have followed the steps outlined in the VSCode wiki on how to contribute, and everything is working as expected (All commands have been run on the WSL terminal following the Linux instructions)
After running yarn run watch, I try to launch VSCode by running DISPLAY=:0 ./scripts/code.sh from the source code directory, but nothing happens. I get two duplicate warnings:
[21496:1128/120229.392130:WARNING:audio_manager.cc(295)] Multiple instances of AudioManager detected
but I'm not sure if this is causing the problem. I have an X Server client running, and have used to to successfully launch native Windows applications through WSL (terminator, emacs, etc.)
Is what I'm trying to do possible? If so, how can I make it work?
Amazing that you asked this! I was attempting to do the exact same thing at (it seems) the exact same time. Here's my process.
Install XMing
Install the xfree apps
Set DISPLAY=:0
Run xeyes ==> Awesome googly eyes!
Attempt to build vscode from source. The build docs seem to be incomplete b/c I had to install a ton of libraries beyond those listed e.g.
yarn
gulp
gulp-cli
pkg-config
libx11-dev
libxkbfile-dev
libsecret-1-dev
libgtk2.0-dev
libxss-dev
gnome-dev
libgconf2-dev
libnss3-dev
libasound2-dev
Eventually get the yarn tasks to finish such that I could run code.sh
./scripts/code.sh
[20474:1128/153959.035267:ERROR:bus.cc(427)] Failed to connect to the bus: F
ailed to connect to socket /var/run/dbus/system_bus_socket: No such file or
directory
[20474:1128/153959.081986:WARNING:audio_manager.cc(295)] Multiple instances
of AudioManager detected
[20474:1128/153959.082101:WARNING:audio_manager.cc(254)] Multiple instances
of AudioManager detected
Looking at ps I see that the process was running.
Conjectures
It seems that building from source from WSL is not yet supported. Or maybe you can build the artifact, but you can't connect to the Windows display to show it. Based on the quality of the xeyes session, it looks like a very, very, very primitive experience e.g. still using WinXP-style minimize / maximize / close icons.
I was literally writing an Issue on their github page when I thought I'd do one last search and found this post. Much of vscode treats WSL as a second-class environment on Windows. Recent work seems to suggest that things are going to get better as driving to integration between Windows' two internal environments continues to improve (e.g. https://github.com/Microsoft/vscode/issues/39144)
Update 2017-11-30
Based on some pursuit via Github, it seems that this issue has been reported to the WSL team: https://github.com/Microsoft/WSL/issues/2293. It appears to be under active consideration by the WSL team. I've added some commentary about my use case there.
I'm learning how to write a basic OS kernel with intermezzos.github.io
I'm running in Windows Subsystem for Linux on Windows 10 v1607.
I'm at the point where I want to run my .iso with qemu-systems-x86_64 -cdrom os.iso.
Previously I was able to run the command and QEMU would run a window, which was running into another problem, posted here: QEMU, No bootable device, Windows Subsystem for Linux
Now when running the command, I receive the following error: Could not initialize SDL(No available video device) - exiting
When I ran into this problem before I installed Xming, ran it, and then QEMU successfully ran. But now, when I try to run Xming it no longer solves the problem.
I even tried installing xorg and running startx on WSL but that starts another issue: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
I really don't know what I'm doing and I have so many questions.
I'm under the impression that for QEMU to successfully run, it needs to be able to find a video driver. Is that the purpose of X11?
I am able to get qemu-system-x86_64 -cdrom os.iso to run the expected window after setting: export DISPLAY=:0
Partially solves my problem because I'm still running into QEMU, No bootable device, Windows Subsystem for Linux
I'm wondering if I'm setting the DISPLAY environment variable correctly.
Here's documentation on the DISPLAY variable, for anyone else that wants to learn: http://gerardnico.com/wiki/linux/display
Anyway, this portion is solved!
Failed to load VMMR0.r0 (VERR_LDR_MISMATCH_NATIVE)
My VMs on Virtualbox 4.2 (on Windows 7 32-bit) were running absolutely fine until I started installing a new VM, which would not go beyond the Linux boot screen.
I deleted the VM and created new one, but it still didn't run.
So I installed the new version of VirtualBox (version 4.3.6.r91406) and rebooted the machine; but when I started any of my previously working VMs, I got the following error
Failed to open a session for the virtual machine m14
Failed to load VMMR0.r0
(VERR_LDR_MISMATCH_NATIVE
with the following details:
Result Code: E_FAIL (0x80004005)
Component: Console
Interface: IConsole
{8ab7c520-2442-4b66-8d74-4ff1e195d2b6}
On checking the forums, I saw few posts asking to check the .vbox files. In the directory of the VM, there are two, m14.vbox and m14.vbox-prev.
I removed the prev file and restarted the VM, again got same error, and the m14.vbox-prev file came again. So I then removed the original m14.vbox file and renamed the prev file to original and then started the VM: it still didn't work.
Any clues fixing this?
Hi I had the same problem in version 4.3
I disabled the floppy and the CD into the system configuration of the virtual machine and then the machine has started properly without realizing the error.
Add or update the extension pack.
If that doesn't solves the problem, then uninstall the Virtual Box, delete the following folder:
C:\USERS\<username>\AppData\Local\VirtualStore\Program Files\Oracle
then install Virtual Box again and run it as administrator. (In some cases running it as simple user may work too.)
Run as Administrator
I had the same problem after updating from 4.1 or 4.2, to 4.3.18.
I didn't reboot and the "Right click Virtualbox icon - Run as Administrator" technique worked for me (in Windows).
pls run the vbox-ssl-cacertificate.crt file. That may resolve above problem. This solution works for me.
FINALLY.
A while back I turned on ASLR for everything using EMET. Running EMET again and changing it back to the default of "Application OptIn" + reboot fixed it.
Like akshah123 I had driver verifier (verifier.exe) running because I was diagnosing random BSODs on my laptop. Running:
verifier.exe /reset
and then rebooting fixed this issue for me.
Launching VirtualBox as administrator got my VM running as normal.
Didn't need to try any other approach.
All,
Am trying to get Node.js to work on Vista machine.
I installed Cygwin (as per the Github instructions) which appears to have been installed correctly. However, none of the commands are executing.
Are there any tutorials for the stages after the Cygwin installation?
PROBLEM: When any command is executed, I get 'Bash: command not found' error.
Not even command like 'c:\cygwin\bin' is executing.
When I type 'user' in cygwin command prompt, I get 'ntvdm has encountered an system error. Parameter incorrect'.
I thought the above error may be due to the firewall, disabling the firewall did not have any effect, running the program with admin rights also did not change the results...
Am confused and would love to get some guidance on what steps to go with next on getting Node.js up and running on a Windows Vista machine.
Many thanks,
UPDATE1:
We managed to make a bit more progress. It appears that we had not installed all the relevant files related to Cygwin. Upon re-download and reinstalled, it ran well, however, we have driven into another error. Error we get:
How to compile/install node.js(could not configure a cxx compiler!) (Ubuntu).
We followed the instructions as per the above thread (3rd post from top for Windows machines), however, we are still stuck at the same error.
Any guidance please?
Have you tried just using the Windows self contained binaries? http://node-js.prcn.co.cc/ This way you actually don't need to bother with Cygwin.
At first, i tried it your way too, using Cygwin. After smashing my head for the 10th time against a wall i just stopped trying and found a much cleaner solution.
I'm using VirtualBox running a Debain guest system to locally develop on my Windows 7 machine. Using VirtualBox, you can easily set up shared folders or port forwarding for node apps between your Windows machine and your Debian guest system.
Since you are using a plain Linux-system, all the compiling-pain is blown away.
If you plan to run node.js in production on a windows system: don't. I hardly believe node.js will be ever stable enough on windows-based systems using MINGW/Cygwin...
People seem to run into problems with Cygwin because they think that they are using a Windows machine.
If you install Cygwin, and open a bash shell prompt using the Cygwin icon, you are now in a UNIX environment and everything works the same as it would on UNIX. That includes building node.js.
I think you added some info to the question and I can see your problem. Yes, normally on Cygwin it has been possible to build node.js just as you would on any UNIX system, but that is no longer possible on Windows 7. Before running ./configure you have to:
Close all cygwin apps.
Double-click on C:\Cygwin\bin\ash.exe
Run ./rebaseall and when it completes, run ./perlrebase.
exit from the ash shell window.
At this point Cygwin will be back to normal and you can ./configure and make install.