The problem I'm having can be reduced to:
Given an array of N positive numbers, find the non-contiguous sequence of exactly K elements with the minimal sum.
Ok-ish: report the sum only. Bonus: the picked elements can be identified (at least one set of indices, if many can realize the same sum).
(in layman terms: pick any K non-neighbouring elements from N values so that their sum is minimal)
Of course, 2*K <= N+1 (otherwise no solution is possible), the problem is insensitive to positive/negative (just shift the array values with the MIN=min(A...) then add back K*MIN to the answer).
What I got so far (the naive approach):
select K+2 indexes of the values closest to the minimum. I'm not sure about this, for K=2 this seems to be the required to cover all the particular cases, but I don't know if it is required/sufficient for K>2**
brute force the minimal sum from the values of indices resulted at prev step respecting the non-contiguity criterion - if I'm right and K+2 is enough, I can live brute-forcing a (K+1)*(K+2) solution space but, as I said. I'm not sure K+2 is enough for K>2 (if in fact 2*K points are necessary, then brute-forcing goes out of window - the binomial coefficient C(2*K, K) grows prohibitively fast)
Any clever idea of how this can be done with minimal time/space complexity?
** for K=2, a non-trivial example where 4 values closest to the absolute minimum are necessary to select the objective sum [4,1,0,1,4,3,4] - one cannot use the 0 value for building the minimal sum, as it breaks the non-contiguity criterion.
PS - if you feel like showing code snippets, C/C++ and/or Java will be appreciated, but any language with decent syntax or pseudo-code will do (I reckon "decent syntax" excludes Perl, doesn't it?)
Let's assume input numbers are stored in array a[N]
Generic approach is DP: f(n, k) = min(f(n-1, k), f(n-2, k-1)+a[n])
It takes O(N*K) time and has 2 options:
for lazy backtracking recursive solution O(N*K) space
for O(K) space for forward cycle
In special case of big K there is another possibility:
use recursive back-tracking
instead of helper array of N*K size use map(n, map(k, pair(answer, list(answer indexes))))
save answer and list of indexes for this answer
instantly return MAX_INT if k>N/2
This way you'll have lower time than O(NK) for K~=N/2, something like O(Nlog(N)). It will increase up to O(N*log(N)Klog(K)) for small K, so decision between general approach or special case algorithm is important.
There should be a dynamic programming approach to this.
Work along the array from left to right. At each point i, for each value of j from 1..k, find the value of the right answer for picking j non-contiguous elements from 1..i. You can work out the answers at i by looking at the answers at i-1, i-2, and the value of array[i]. The answer you want is the answer at n for an array of length n. After you have done this you should be able to work out what the elements are by back-tracking along the array to work out whether the best decision at each point involves selecting the array element at that point, and therefore whether it used array[i-1][k] or array[i-2][k-1].
If I have an unsorted large set of n integers (say 2^20 of them) and would like to generate subsets with k elements each (where k is small, say 5) in increasing order of their sums, what is the most efficient way to do so?
Why I need to generate these subsets in this fashion is that I would like to find the k-element subset with the smallest sum satisfying a certain condition, and I thus would apply the condition on each of the k-element subsets generated.
Also, what would be the complexity of the algorithm?
There is a similar question here: Algorithm to get every possible subset of a list, in order of their product, without building and sorting the entire list (i.e Generators) about generating subsets in order of their product, but it wouldn't fit my needs due to the extremely large size of the set n
I intend to implement the algorithm in Mathematica, but could do it in C++ or Python too.
If your desired property of the small subsets (call it P) is fairly common, a probabilistic approach may work well:
Sort the n integers (for millions of integers i.e. 10s to 100s of MB of ram, this should not be a problem), and sum the k-1 smallest. Call this total offset.
Generate a random k-subset (say, by sampling k random numbers, mod n) and check it for P-ness.
On a match, note the sum-total of the subset. Subtract offset from this to find an upper bound on the largest element of any k-subset of equivalent sum-total.
Restrict your set of n integers to those less than or equal to this bound.
Repeat (goto 2) until no matches are found within some fixed number of iterations.
Note the initial sort is O(n log n). The binary search implicit in step 4 is O(log n).
Obviously, if P is so rare that random pot-shots are unlikely to get a match, this does you no good.
Even if only 1 in 1000 of the k-sized sets meets your condition, That's still far too many combinations to test. I believe runtime scales with nCk (n choose k), where n is the size of your unsorted list. The answer by Andrew Mao has a link to this value. 10^28/1000 is still 10^25. Even at 1000 tests per second, that's still 10^22 seconds. =10^14 years.
If you are allowed to, I think you need to eliminate duplicate numbers from your large set. Each duplicate you remove will drastically reduce the number of evaluations you need to perform. Sort the list, then kill the dupes.
Also, are you looking for the single best answer here? Who will verify the answer, and how long would that take? I suggest implementing a Genetic Algorithm and running a bunch of instances overnight (for as long as you have the time). This will yield a very good answer, in much less time than the duration of the universe.
Do you mean 20 integers, or 2^20? If it's really 2^20, then you may need to go through a significant amount of (2^20 choose 5) subsets before you find one that satisfies your condition. On a modern 100k MIPS CPU, assuming just 1 instruction can compute a set and evaluate that condition, going through that entire set would still take 3 quadrillion years. So if you even need to go through a fraction of that, it's not going to finish in your lifetime.
Even if the number of integers is smaller, this seems to be a rather brute force way to solve this problem. I conjecture that you may be able to express your condition as a constraint in a mixed integer program, in which case solving the following could be a much faster way to obtain the solution than brute force enumeration. Assuming your integers are w_i, i from 1 to N:
min sum(i) w_i*x_i
x_i binary
sum over x_i = k
subject to (some constraints on w_i*x_i)
If it turns out that the linear programming relaxation of your MIP is tight, then you would be in luck and have a very efficient way to solve the problem, even for 2^20 integers (Example: max-flow/min-cut problem.) Also, you can use the approach of column generation to find a solution since you may have a very large number of values that cannot be solved for at the same time.
If you post a bit more about the constraint you are interested in, I or someone else may be able to propose a more concrete solution for you that doesn't involve brute force enumeration.
Here's an approximate way to do what you're saying.
First, sort the list. Then, consider some length-5 index vector v, corresponding to the positions in the sorted list, where the maximum index is some number m, and some other index vector v', with some max index m' > m. The smallest sum for all such vectors v' is always greater than the smallest sum for all vectors v.
So, here's how you can loop through the elements with approximately increasing sum:
sort arr
for i = 1 to N
for v = 5-element subsets of (1, ..., i)
set = arr{v}
if condition(set) is satisfied
break_loop = true
compute sum(set), keep set if it is the best so far
break if break_loop
Basically, this means that you no longer need to check for 5-element combinations of (1, ..., n+1) if you find a satisfying assignment in (1, ..., n), since any satisfying assignment with max index n+1 will have a greater sum, and you can stop after that set. However, there is no easy way to loop through the 5-combinations of (1, ..., n) while guaranteeing that the sum is always increasing, but at least you can stop checking after you find a satisfying set at some n.
This looks to be a perfect candidate for map-reduce (http://en.wikipedia.org/wiki/MapReduce). If you know of any way of partitioning them smartly so that passing candidates are equally present in each node then you can probably get a great throughput.
Complete sort may not really be needed as the map stage can take care of it. Each node can then verify the condition against the k-tuples and output results into a file that can be aggregated / reduced later.
If you know of the probability of occurrence and don't need all of the results try looking at probabilistic algorithms to converge to an answer.
So, this is a common interview question. There's already a topic up, which I have read, but it's dead, and no answer was ever accepted. On top of that, my interests lie in a slightly more constrained form of the question, with a couple practical applications.
Given a two dimensional array such that:
Elements are unique.
Elements are sorted along the x-axis and the y-axis.
Neither sort predominates, so neither sort is a secondary sorting parameter.
As a result, the diagonal is also sorted.
All of the sorts can be thought of as moving in the same direction. That is to say that they are all ascending, or that they are all descending.
Technically, I think as long as you have a >/=/< comparator, any total ordering should work.
Elements are numeric types, with a single-cycle comparator.
Thus, memory operations are the dominating factor in a big-O analysis.
How do you find an element? Only worst case analysis matters.
Solutions I am aware of:
A variety of approaches that are:
O(nlog(n)), where you approach each row separately.
O(nlog(n)) with strong best and average performance.
One that is O(n+m):
Start in a non-extreme corner, which we will assume is the bottom right.
Let the target be J. Cur Pos is M.
If M is greater than J, move left.
If M is less than J, move up.
If you can do neither, you are done, and J is not present.
If M is equal to J, you are done.
Originally found elsewhere, most recently stolen from here.
And I believe I've seen one with a worst-case O(n+m) but a optimal case of nearly O(log(n)).
What I am curious about:
Right now, I have proved to my satisfaction that naive partitioning attack always devolves to nlog(n). Partitioning attacks in general appear to have a optimal worst-case of O(n+m), and most do not terminate early in cases of absence. I was also wondering, as a result, if an interpolation probe might not be better than a binary probe, and thus it occurred to me that one might think of this as a set intersection problem with a weak interaction between sets. My mind cast immediately towards Baeza-Yates intersection, but I haven't had time to draft an adaptation of that approach. However, given my suspicions that optimality of a O(N+M) worst case is provable, I thought I'd just go ahead and ask here, to see if anyone could bash together a counter-argument, or pull together a recurrence relation for interpolation search.
Here's a proof that it has to be at least Omega(min(n,m)). Let n >= m. Then consider the matrix which has all 0s at (i,j) where i+j < m, all 2s where i+j >= m, except for a single (i,j) with i+j = m which has a 1. This is a valid input matrix, and there are m possible placements for the 1. No query into the array (other than the actual location of the 1) can distinguish among those m possible placements. So you'll have to check all m locations in the worst case, and at least m/2 expected locations for any randomized algorithm.
One of your assumptions was that matrix elements have to be unique, and I didn't do that. It is easy to fix, however, because you just pick a big number X=n*m, replace all 0s with unique numbers less than X, all 2s with unique numbers greater than X, and 1 with X.
And because it is also Omega(lg n) (counting argument), it is Omega(m + lg n) where n>=m.
An optimal O(m+n) solution is to start at the top-left corner, that has minimal value. Move diagonally downwards to the right until you hit an element whose value >= value of the given element. If the element's value is equal to that of the given element, return found as true.
Otherwise, from here we can proceed in two ways.
Strategy 1:
Move up in the column and search for the given element until we reach the end. If found, return found as true
Move left in the row and search for the given element until we reach the end. If found, return found as true
return found as false
Strategy 2:
Let i denote the row index and j denote the column index of the diagonal element we have stopped at. (Here, we have i = j, BTW). Let k = 1.
Repeat the below steps until i-k >= 0
Search if a[i-k][j] is equal to the given element. if yes, return found as true.
Search if a[i][j-k] is equal to the given element. if yes, return found as true.
Increment k
1 2 4 5 6
2 3 5 7 8
4 6 8 9 10
5 8 9 10 11
Given an n×n matrix of real numbers. You are allowed to erase any number (from 0 to n) of rows and any number (from 0 to n) of columns, and after that the sum of the remaining entries is computed. Come up with an algorithm which finds out which rows and columns to erase in order to maximize that sum.
The problem is NP-hard. (So you should not expect a polynomial-time algorithm for solving this problem. There could still be (non-polynomial time) algorithms that are slightly better than brute-force, though.) The idea behind the proof of NP-hardness is that if we could solve this problem, then we could solve the the clique problem in a general graph. (The maximum-clique problem is to find the largest set of pairwise connected vertices in a graph.)
Specifically, given any graph with n vertices, let's form the matrix A with entries a[i][j] as follows:
a[i][j] = 1 for i == j (the diagonal entries)
a[i][j] = 0 if the edge (i,j) is present in the graph (and i≠j)
a[i][j] = -n-1 if the edge (i,j) is not present in the graph.
Now suppose we solve the problem of removing some rows and columns (or equivalently, keeping some rows and columns) so that the sum of the entries in the matrix is maximized. Then the answer gives the maximum clique in the graph:
Claim: In any optimal solution, there is no row i and column j kept for which the edge (i,j) is not present in the graph. Proof: Since a[i][j] = -n-1 and the sum of all the positive entries is at most n, picking (i,j) would lead to a negative sum. (Note that deleting all rows and columns would give a better sum, of 0.)
Claim: In (some) optimal solution, the set of rows and columns kept is the same. This is because starting with any optimal solution, we can simply remove all rows i for which column i has not been kept, and vice-versa. Note that since the only positive entries are the diagonal ones, we do not decrease the sum (and by the previous claim, we do not increase it either).
All of which means that if the graph has a maximum clique of size k, then our matrix problem has a solution with sum k, and vice-versa. Therefore, if we could solve our initial problem in polynomial time, then the clique problem would also be solved in polynomial time. This proves that the initial problem is NP-hard. (Actually, it is easy to see that the decision version of the initial problem — is there a way of removing some rows and columns so that the sum is at least k — is in NP, so the (decision version of the) initial problem is actually NP-complete.)
Well the brute force method goes something like this:
For n rows there are 2n subsets.
For n columns there are 2n subsets.
For an n x n matrix there are 22n subsets.
0 elements is a valid subset but obviously if you have 0 rows or 0 columns the total is 0 so there are really 22n-2+1 subsets but that's no different.
So you can work out each combination by brute force as an O(an) algorithm. Fast. :)
It would be quicker to work out what the maximum possible value is and you do that by adding up all the positive numbers in the grid. If those numbers happen to form a valid sub-matrix (meaning you can create that set by removing rows and/or columns) then there's your answer.
Implicit in this is that if none of the numbers are negative then the complete matrix is, by definition, the answer.
Also, knowing what the highest possible maximum is possibly allows you to shortcut the brute force evaluation since if you get any combination equal to that maximum then that is your answer and you can stop checking.
Also if all the numbers are non-positive, the answer is the maximum value as you can reduce the matrix to a 1 x 1 matrix with that 1 value in it, by definition.
Here's an idea: construct 2n-1 n x m matrices where 1 <= m <= n. Process them one after the other. For each n x m matrix you can calculate:
The highest possible maximum sum (as per above); and
Whether no numbers are positive allowing you to shortcut the answer.
if (1) is below the currently calculate highest maximum sum then you can discard this n x m matrix. If (2) is true then you just need a simple comparison to the current highest maximum sum.
This is generally referred to as a pruning technique.
What's more you can start by saying that the highest number in the n x n matrix is the starting highest maximum sum since obviously it can be a 1 x 1 matrix.
I'm sure you could tweak this into a (slightly more) efficient recursive tree-based search algorithm with the above tests effectively allowing you to eliminate (hopefully many) unnecessary searches.
We can improve on Cletus's generalized brute-force solution by modelling this as a directed graph. The initial matrix is the start node of the graph; its leaves are all the matrices missing one row or column, and so forth. It's a graph rather than a tree, because the node for the matrix without both the first column and row will have two parents - the nodes with just the first column or row missing.
We can optimize our solution by turning the graph into a tree: There's never any point exploring a submatrix with a column or row deleted that comes before the one we deleted to get to the current node, as that submatrix will be arrived at anyway.
This is still a brute-force search, of course - but we've eliminated the duplicate cases where we remove the same rows in different orders.
Here's an example implementation in Python:
def maximize_sum(m):
frontier = [(m, 0, False)]
best = None
best_score = 0
while frontier:
current, startidx, cols_done = frontier.pop()
score = matrix_sum(current)
if score > best_score or not best:
best = current
best_score = score
w, h = matrix_size(current)
if not cols_done:
for x in range(startidx, w):
frontier.append((delete_column(current, x), x, False))
startidx = 0
for y in range(startidx, h):
frontier.append((delete_row(current, y), y, True))
return best_score, best
And here's the output on 280Z28's example matrix:
>>> m = ((1, 1, 3), (1, -89, 101), (1, 102, -99))
>>> maximize_sum(m)
(106, [(1, 3), (1, 101)])
Since nobody asked for an efficient algorithm, use brute force: generate every possible matrix that can be created by removing rows and/or columns from the original matrix, choose the best one. A slightly more efficent version, which most likely can be proved to still be correct, is to generate only those variants where the removed rows and columns contain at least one negative value.
To try it in a simple way:
We need the valid subset of the set of entries {A00, A01, A02, ..., A0n, A10, ...,Ann} which max. sum.
First compute all subsets (the power set).
A valid subset is a member of the power set that for each two contained entries Aij and A(i+x)(j+y), contains also the elements A(i+x)j and Ai(j+y) (which are the remaining corners of the rectangle spanned by Aij and A(i+x)(j+y)).
Aij ...
. .
. .
... A(i+x)(j+y)
By that you can eliminate the invalid ones from the power set and find the one with the biggest sum in the remaining.
I'm sure it can be improved by improving an algorithm for power set generation in order to generate only valid subsets and by that avoiding step 2 (adjusting the power set).
I think there are some angles of attack that might improve upon brute force.
memoization, since there are many distinct sequences of edits that will arrive at the same submatrix.
dynamic programming. Because the search space of matrices is highly redundant, my intuition is that there would be a DP formulation that can save a lot of repeated work
I think there's a heuristic approach, but I can't quite nail it down:
if there's one negative number, you can either take the matrix as it is, remove the column of the negative number, or remove its row; I don't think any other "moves" result in a higher sum. For two negative numbers, your options are: remove neither, remove one, remove the other, or remove both (where the act of removal is either by axing the row or the column).
Now suppose the matrix has only one positive number and the rest are all <=0. You clearly want to remove everything but the positive entry. For a matrix with only 2 positive entries and the rest <= 0, the options are: do nothing, whittle down to one, whittle down to the other, or whittle down to both (resulting in a 1x2, 2x1, or 2x2 matrix).
In general this last option falls apart (imagine a matrix with 50 positives & 50 negatives), but depending on your data (few negatives or few positives) it could provide a shortcut.
Create an n-by-1 vector RowSums, and an n-by-1 vector ColumnSums. Initialize them to the row and column sums of the original matrix. O(n²)
If any row or column has a negative sum, remove edit: the one with the minimum such and update the sums in the other direction to reflect their new values. O(n)
Stop when no row or column has a sum less than zero.
This is an iterative variation improving on another answer. It operates in O(n²) time, but fails for some cases mentioned in other answers, which is the complexity limit for this problem (there are n² entries in the matrix, and to even find the minimum you have to examine each cell once).
Edit: The following matrix has no negative rows or columns, but is also not maximized, and my algorithm doesn't catch it.
1 1 3 goal 1 3
1 -89 101 ===> 1 101
1 102 -99
The following matrix does have negative rows and columns, but my algorithm selects the wrong ones for removal.
-5 1 -5 goal 1
1 1 1 ===> 1
-10 2 -10 2
mine
===> 1 1 1
Compute the sum of each row and column. This can be done in O(m) (where m = n^2)
While there are rows or columns that sum to negative remove the row or column that has the lowest sum that is less than zero. Then recompute the sum of each row/column.
The general idea is that as long as there is a row or a column that sums to nevative, removing it will result in a greater overall value. You need to remove them one at a time and recompute because in removing that one row/column you are affecting the sums of the other rows/columns and they may or may not have negative sums any more.
This will produce an optimally maximum result. Runtime is O(mn) or O(n^3)
I cannot really produce an algorithm on top of my head, but to me it 'smells' like dynamic programming, if it serves as a start point.
Big Edit: I honestly don't think there's a way to assess a matrix and determine it is maximized, unless it is completely positive.
Maybe it needs to branch, and fathom all elimination paths. You never no when a costly elimination will enable a number of better eliminations later. We can short circuit if it's found the theoretical maximum, but other than any algorithm would have to be able to step forward and back. I've adapted my original solution to achieve this behaviour with recursion.
Double Secret Edit: It would also make great strides to reduce to complexity if each iteration didn't need to find all negative elements. Considering that they don't change much between calls, it makes more sense to just pass their positions to the next iteration.
Takes a matrix, the list of current negative elements in the matrix, and the theoretical maximum of the initial matrix. Returns the matrix's maximum sum and the list of moves required to get there. In my mind move list contains a list of moves denoting the row/column removed from the result of the previous operation.
Ie: r1,r1
Would translate
-1 1 0 1 1 1
-4 1 -4 5 7 1
1 2 4 ===>
5 7 1
Return if sum of matrix is the theoretical maximum
Find the positions of all negative elements unless an empty set was passed in.
Compute sum of matrix and store it along side an empty move list.
For negative each element:
Calculate the sum of that element's row and column.
clone the matrix and eliminate which ever collection has the minimum sum (row/column) from that clone, note that action as a move list.
clone the list of negative elements and remove any that are effected by the action taken in the previous step.
Recursively call this algorithm providing the cloned matrix, the updated negative element list and the theoretical maximum. Append the moves list returned to the move list for the action that produced the matrix passed to the recursive call.
If the returned value of the recursive call is greater than the stored sum, replace it and store the returned move list.
Return the stored sum and move list.
I'm not sure if it's better or worse than the brute force method, but it handles all the test cases now. Even those where the maximum contains negative values.
This is an optimization problem and can be solved approximately by an iterative algorithm based on simulated annealing:
Notation: C is number of columns.
For J iterations:
Look at each column and compute the absolute benefit of toggling it (turn it off if it's currently on or turn it on if it's currently off). That gives you C values, e.g. -3, 1, 4. A greedy deterministic solution would just pick the last action (toggle the last column to get a benefit of 4) because it locally improves the objective. But that might lock us into a local optimum. Instead, we probabilistically pick one of the three actions, with probabilities proportional to the benefits. To do this, transform them into a probability distribution by putting them through a Sigmoid function and normalizing. (Or use exp() instead of sigmoid()?) So for -3, 1, 4 you get 0.05, 0.73, 0.98 from the sigmoid and 0.03, 0.42, 0.56 after normalizing. Now pick the action according to the probability distribution, e.g. toggle the last column with probability 0.56, toggle the second column with probability 0.42, or toggle the first column with the tiny probability 0.03.
Do the same procedure for the rows, resulting in toggling one of the rows.
Iterate for J iterations until convergence.
We may also, in early iterations, make each of these probability distributions more uniform, so that we don't get locked into bad decisions early on. So we'd raise the unnormalized probabilities to a power 1/T, where T is high in early iterations and is slowly decreased until it approaches 0. For example, 0.05, 0.73, 0.98 from above, raised to 1/10 results in 0.74, 0.97, 1.0, which after normalization is 0.27, 0.36, 0.37 (so it's much more uniform than the original 0.05, 0.73, 0.98).
It's clearly NP-Complete (as outlined above). Given this, if I had to propose the best algorithm I could for the problem:
Try some iterations of quadratic integer programming, formulating the problem as: SUM_ij a_ij x_i y_j, with the x_i and y_j variables constrained to be either 0 or 1. For some matrices I think this will find a solution quickly, for the hardest cases it would be no better than brute force (and not much would be).
In parallel (and using most of the CPU), use a approximate search algorithm to generate increasingly better solutions. Simulating Annealing was suggested in another answer, but having done research on similar combinatorial optimisation problems, my experience is that tabu search would find good solutions faster. This is probably close to optimal in terms of wandering between distinct "potentially better" solutions in the shortest time, if you use the trick of incrementally updating the costs of single changes (see my paper "Graph domination, tabu search and the football pool problem").
Use the best solution so far from the second above to steer the first by avoiding searching possibilities that have lower bounds worse than it.
Obviously this isn't guaranteed to find the maximal solution. But, it generally would when this is feasible, and it would provide a very good locally maximal solution otherwise. If someone had a practical situation requiring such optimisation, this is the solution that I'd think would work best.
Stopping at identifying that a problem is likely to be NP-Complete will not look good in a job interview! (Unless the job is in complexity theory, but even then I wouldn't.) You need to suggest good approaches - that is the point of a question like this. To see what you can come up with under pressure, because the real world often requires tackling such things.
yes, it's NP-complete problem.
It's hard to easily find the best sub-matrix,but we can easily to find some better sub-matrix.
Assume that we give m random points in the matrix as "feeds". then let them to automatically extend by the rules like :
if add one new row or column to the feed-matrix, ensure that the sum will be incrementive.
,then we can compare m sub-matrix to find the best one.
Let's say n = 10.
Brute force (all possible sets of rows x all possible sets of columns) takes
2^10 * 2^10 =~ 1,000,000 nodes.
My first approach was to consider this a tree search, and use
the sum of positive entries is an upper bound for every node in the subtree
as a pruning method. Combined with a greedy algorithm to cheaply generate good initial bounds, this yielded answers in about 80,000 nodes on average.
but there is a better way ! i later realised that
Fix some choice of rows X.
Working out the optimal columns for this set of rows is now trivial (keep a column if its sum of its entries in the rows X is positive, otherwise discard it).
So we can just brute force over all possible choices of rows; this takes 2^10 = 1024 nodes.
Adding the pruning method brought this down to 600 nodes on average.
Keeping 'column-sums' and incrementally updating them when traversing the tree of row-sets should allow the calculations (sum of matrix etc) at each node to be O(n) instead of O(n^2). Giving a total complexity of O(n * 2^n)
For slightly less than optimal solution, I think this is a PTIME, PSPACE complexity issue.
The GREEDY algorithm could run as follows:
Load the matrix into memory and compute row totals. After that run the main loop,
1) Delete the smallest row,
2) Subtract the newly omitted values from the old row totals
--> Break when there are no more negative rows.
Point two is a subtle detail: subtracted two rows/columns has time complexity n.
While re-summing all but two columns has n^2 time complexity!
Take each row and each column and compute the sum. For a 2x2 matrix this will be:
2 1
3 -10
Row(0) = 3
Row(1) = -7
Col(0) = 5
Col(1) = -9
Compose a new matrix
Cost to take row Cost to take column
3 5
-7 -9
Take out whatever you need to, then start again.
You just look for negative values on the new matrix. Those are values that actually substract from the overall matrix value. It terminates when there're no more negative "SUMS" values to take out (therefore all columns and rows SUM something to the final result)
In an nxn matrix that would be O(n^2)Log(n) I think
function pruneMatrix(matrix) {
max = -inf;
bestRowBitField = null;
bestColBitField = null;
for(rowBitField=0; rowBitField<2^matrix.height; rowBitField++) {
for (colBitField=0; colBitField<2^matrix.width; colBitField++) {
sum = calcSum(matrix, rowBitField, colBitField);
if (sum > max) {
max = sum;
bestRowBitField = rowBitField;
bestColBitField = colBitField;
}
}
}
return removeFieldsFromMatrix(bestRowBitField, bestColBitField);
}
function calcSumForCombination(matrix, rowBitField, colBitField) {
sum = 0;
for(i=0; i<matrix.height; i++) {
for(j=0; j<matrix.width; j++) {
if (rowBitField & 1<<i && colBitField & 1<<j) {
sum += matrix[i][j];
}
}
}
return sum;
}