As shown in below image i have this view in outllook
But Automatically/By Mistake view has changed like this(as shown in below images) so how to set like previous view
and i tried like this but Middle Pane (Marked Area) is not worked or not looking like previous view
The Outlook view - the reading pane depends on the item type selected in the list. On the first screenshot you've selected a meeting request and on the last one I see a regular mail item.
Related
I am a newbie in PowerApps, and I am trying to build an app where based on user click, user should be able to see filtered data.My test data looks like below.For this I have created 3 button in my gallery titled as "Available", "Out-of-service" and "In-use". So, let's say when user clicks on "Available" button, the app should display the user "Sys1" and "Sys2". Likewise, same is true for "Out-of-service" and "In-use" button. I have my datasource save as ExcelTable in Onedrive and I was able to successfully connect to the source.However, when I tried below code on my "Available" button nothing happened.I am not sure what is the issue ? [SEE BELOW UPDATE]
If there is good tutorial available for this task feel free to attached link with your response.
Code
Filter(Table1,Column2,"Available" in Column2)
Note: Property: OnSelect
Update:
After little bit of research I found that I need to have separate screen to display my filtered data. So I used Navigate() function to take me to new screen. On my screen2 I have below code
Code:
Filter(Table1, column2="Available")
Note: Property is set to "OnVisible". I also added FormViewer using Forms-> Display option. Then under Properties tab,I added column names using Edit fields.
Still Issue is not resolved!
It sounds like you have the Filter command in the wrong place. It should be in the "Items" property for the table, not in the Buttons' or in the Screen's properties. The Buttons should toggle a variable to the different Statuses you have.
The Items property of the table/gallery/etc that shows the data would look like this:
Filter(Table1, Column2=currentStatus)
The buttons would all have code that looks like this but with different statuses:
Set(currentStatus, "Available")
That way when you click the buttons, the value of currentStatus changes and will change the action of the filter.
Also, you can have the data visible on the second screen if you want but it's not strictly necessary. You can do what I described on a single screen.
How to create menu like below
I have already craeted charts but all of them are displayed within tab open, I want to create menu like above to choose which one should be displayed.
Does anyone have suggestion or some tutorial to watch how to make these?
To me, it looks like a Static content region that has buttons as menu items. Those buttons have images on them (so that they look pretty - like the one you attached, having blue-red-green worksheets).
How to do that?
Create a button
modify its size using "Custom attributes" property. For example:
style="width:100px; height:100px"
in order to put an image onto the button, here are two options you might want to explore:
if it (the image) is in workspace images (uploadable as a shared component), then resize it before uploading and set it to a button by putting something like this into button's label property:
<img src="#WORKSPACE_IMAGES#PRETTY_WORKSHEETS.JPG">
or, use "Custom attributes" again, this time by using a fully-qualified URL as an image source, e.g.
style="width:100px; height:100px; background-image:url('https://www.miroconsulting.com/wp-content/uploads/2018/10/oracle-apex-license-1.png')"
The rest should be easy, i.e. setting a link to the button so that - when pressed - it takes you to another page in this application (which is what you, probably, will do).
On the order form, there is a products section that has uses the default Order Product Inline Edit View. This view is not editable, but you can copy it and save it as a different name.
However, when you copy the view, the new view does not display all of the same buttons when viewing the sub-grid.
default view:
copied view (the lock pricing, move up and move down buttons are missing):
The copied view shows the + button and it's drop down menu correctly. Why hasn't it copied the other buttons, and how can i get them to show on my custom view?
I am happy to edit xml and upload that back to CRM if necessary.
Update:
FYI, this is all a pointless effort as the word template ignores the sequence order. What an utter waste of time.
I'm going to guess it's because the default view on the order of order products is a special one. It has special behaviours that arn't seen in the rest of 365, i.e. you don't get up, down, or lock on other views.
I would assume that the extra buttons only get shown on that default view and arn't really supported outside of that view.
Turns out it is actually quite easy to show these buttons for other views using the ribbon workbench.
Right click on the button in ribbon workbench under the subgrid section and click on customise
Select the command in the "solution elements" pane at the bottom
In the bottom right hand pane, right click on the enable rule "Mscrm.IsInlineEditView" and click "Remove from Command"
Publish
These buttons now show up for all views.
I'd like to ask you, what do you think, which control is better for navigation. What I mean?
Now I have Pivot control with 2 PivotItems. One of them is named Contacts. This PivotItem contains Frame. And the frame makes new navigation on page with contacts (listview). Why Frame? When I click on some contact I need to show details of current contact. But I need to display it inside PivotItem, therefore I use inner frame. So I can still see main view and other pivot items. I think, that pivot is not right control for it. Or I should show contact details for whole screen, not only in pivotitem.
FrameA and FrameB. FrameA has navigated from Main to Page1. Page1 has a Pivot that hosts FrameB in PivotItem1 and FrameB has navigated from View1 to View 2 and from View2 to View 3
I suggest you start reading up on navigation basics for Windows 10 and look at some other apps how they do it.
You could use a navigation pane (which is mostly done using a SplitView), in which you show your contacts grid in the main panel and navigate to a single contact when clicking on it. The other item in your navigation pane would be the title for your 2nd pivot tab.
If you want to keep your contact list visibile at all time and show the details of a single contact next to it, the alternative is using master-detail. Either on a full screen, or by placing the master detail on the main panel of your SpltView.
You can find a master-detail control in the UWP Community Toolkit.
I have a Prism/SL3 application with a tab control and each page of the tab control is a "Region" that has its own view and viewModel. when I want to validate the main page, I call dataForm.ValidateItem(), then I go to all the child views and do the same. the problem is, only the pages which user has clicked on them (on the tab page), get instantiated and the pages that are never shown, don't have their view instantiated, thus I can't validate them.
any help?
I created a psuedo work around for this. It's very hacky, but it does work. My example involved walking the visual tree (up and down) to find respective controls that are invalid and then "expanding" the selected item. I have used an accordian in my example, but have also tested this with tab:
http://thoughtjelly.wordpress.com/2009/09/24/walking-the-xaml-visualtree-to-find-a-parent-of-type-t/
HTH,
Mark
EDIT: Link updated.