I am trying to count lines in the files which matches to the given pattern. now the problem is it gives me only the number of lines. How can i get the file location or name along with number of matched lines?
command i am using now is
for i in $(find . -name 'foo.txt' | sed 's/\.\///g');
do
grep -l && -c '^>' $i;
done
so output i am expecting is like "file location/name number of lines matching"
grep can show you the file name if you specify it as a command-line argument. You can use xargs to invoke grep for each batch of filenames. It'll read the names from standard input and use them as command line arguments for grep.
find . | xargs grep -cH '^>'
Using your find command:
find . -name 'foo.txt' | sed 's/\.\///g' | xargs grep -cH '^>'
You capture the number of lines matching in a variable and test it:
n=$(grep -c '^>' "$i")
(( n > 0 )) && echo "$i:$n"
Actually, you don't even need the test: grep exits unsuccessfully if no matches found, so
n=$(grep -c '^>' "$i") && echo "$i:$n"
Actually, that's too much work. With GNU grep at least, use the -H option. A demo with a file I have lying around:
$ grep -c zero note.xml
16
$ grep -Hc zero note.xml
note.xml:16
The very last line of my file should be "#"
if I tail -n 1 * | grep -L "#" the result is (standard input) obviously because it's being piped.
was hoping for a grep solution vs reading the entire file and just searching the last line.
for i in *; do tail -n 1 "$i" | grep -q -v '#' && echo "$i"; done
You can use sed for that:
sed -n 'N;${/pattern/!p}' file
The above command prints all lines of file if it's last line doesn't contain a pattern.
However, it looks like I misunderstood you, you want only to print the file names of the those files where the last line doesn't match the pattern. In this case I would use find together with the following (GNU) sed command:
find -maxdepth 1 -type f -exec sed -n '${/pattern/!F}' {} \;
The find command iterates over all files in the current folder and executes the sed command. $ marks the last line of input. If /pattern/ isn't found ! then F prints the file name.
The solution above looks nice and executes fast it has a drawback it would not print the names of empty files, since the last line will never reached and $ will not match.
For a stable solution I would suggest to put the commands into a script:
script.sh
#!/bin/bash
# Check whether the file is empty ...
if [ ! -s "$1" ] ; then
echo "$1"
else
# ... or if the last line contains a pattern
sed -n '${/pattern/!F}' "$1"
# If you don't have GNU sed you can use this
# (($(tail -n1 a.txt | grep -c pattern))) || echo "$1"
fi
make it executable
chmod +x script.sh
And use the following find command:
find -maxdepth 1 -type f -exec ./script.sh {} \;
Consider this one-liner:
while read name ; do tail -n1 "$name" | grep -q \# || echo "$name" does not contain the pattern ; done < <( find -type f )
It uses tail to get the last line of each file and grep to test that line against the pattern. Performance will not be the best on many files because two new processes are started in each iteration.
I search for some text in some file list. I have the following command to print these lines:
ls -1 *.log | xargs tail --lines=10000 | grep text_for_search
The command output contains all of occurrences of text_for_search, but it hasn't information from which file the occurrences are. How to modify the command to provide this information too?
Actually log files are gigabytes in size, so it's essential to use tail --lines=10000 for each of them
You could just use a loop instead, which will keep track of the file name for you:
for file in *.log; do
if tail --lines=-10000 "$file" | grep -q text_for_search; then
echo "$file"
fi
done
The -q switch to grep suppresses the output, returning a 0 (success) exit code if the pattern is matched.
You can use find command:
find . -name "*.log" -exec grep text_for_search '{}' \;
grep will output filename and matched line. If you just need filenames - add -l switch to grep command.
'{}' - macro used for matched file name substitution in find's -exec command,
\; indicates end of arguments for command, called by exec
Replace your tail command with:
awk '{v[NR]=$0}END{for(i=NR-10000;i<=NR;i++)print FILENAME,v[i]}'
This above is just the replacement of the tail command except it adds a file name in the begining of each line.
You must avoid parsing ls output and use shell's for loop to iterate through all *.log files:
for f in *.log; do
awk -v c=$(wc -l < "$f") 'NR>c-10000 && /text_for_search/{print FILENAME ":" $0}' "$f"
done
EDIT:
You can use awk to search through all *.log files:
awk 'NR>=10000 && /text_for_search/ {print FILENAME ":" $0}' *.log
Not 100% on how to go about this.
Basically my app creates two file outputs.
file
file.ext
when searching through the directory it always returns both files. I wish only to work with
file
how can I do a grep for just the file? Or is grep even the correct command?
!grep *.ext
pseudo code ^
Why not just:
grep foobar file
or if you want to search your directory
find . -name 'file' | xargs -r grep boofar
You can try using grep 'file$', i.e. select lines ending with file and nothing after that. Alternatively you can use grep -v to invert results.
# (echo "file"; echo "file.txt") | grep file$
file
# (echo "file"; echo "file.txt") | grep -v .ext
file
I have no idea what you are trying to do with grep, but if you want to check whether a file exists, you do simply this:
if [ -r /some/path/file ]; then
echo "File is readable."
fi
Grep has a -v flag that inverses the meaning (looks for lines that do not contain the pattern):
ls /your/directory | grep -v '\.ext$'
This will exclude every filename ending with .ext.
Try
grep -v option
-v do the inverse match
For details do $ man grep
To generate a list of all files that do not match a pattern, use -not in find. So you want:
find . -not -name '*.ext'
Is there a simple way, in a pretty standard UNIX environment with bash, to run a command to delete all but the most recent X files from a directory?
To give a bit more of a concrete example, imagine some cron job writing out a file (say, a log file or a tar-ed up backup) to a directory every hour. I'd like a way to have another cron job running which would remove the oldest files in that directory until there are less than, say, 5.
And just to be clear, there's only one file present, it should never be deleted.
The problems with the existing answers:
inability to handle filenames with embedded spaces or newlines.
in the case of solutions that invoke rm directly on an unquoted command substitution (rm `...`), there's an added risk of unintended globbing.
inability to distinguish between files and directories (i.e., if directories happened to be among the 5 most recently modified filesystem items, you'd effectively retain fewer than 5 files, and applying rm to directories will fail).
wnoise's answer addresses these issues, but the solution is GNU-specific (and quite complex).
Here's a pragmatic, POSIX-compliant solution that comes with only one caveat: it cannot handle filenames with embedded newlines - but I don't consider that a real-world concern for most people.
For the record, here's the explanation for why it's generally not a good idea to parse ls output: http://mywiki.wooledge.org/ParsingLs
ls -tp | grep -v '/$' | tail -n +6 | xargs -I {} rm -- {}
Note: This command operates in the current directory; to target a directory explicitly, use a subshell ((...)) with cd:
(cd /path/to && ls -tp | grep -v '/$' | tail -n +6 | xargs -I {} rm -- {})
The same applies analogously to the commands below.
The above is inefficient, because xargs has to invoke rm separately for each filename.
However, your platform's specific xargs implementation may allow you to solve this problem:
A solution that works with GNU xargs is to use -d '\n', which makes xargs consider each input line a separate argument, yet passes as many arguments as will fit on a command line at once:
ls -tp | grep -v '/$' | tail -n +6 | xargs -d '\n' -r rm --
Note: Option -r (--no-run-if-empty) ensures that rm is not invoked if there's no input.
A solution that works with both GNU xargs and BSD xargs (including on macOS) - though technically still not POSIX-compliant - is to use -0 to handle NUL-separated input, after first translating newlines to NUL (0x0) chars., which also passes (typically) all filenames at once:
ls -tp | grep -v '/$' | tail -n +6 | tr '\n' '\0' | xargs -0 rm --
Explanation:
ls -tp prints the names of filesystem items sorted by how recently they were modified , in descending order (most recently modified items first) (-t), with directories printed with a trailing / to mark them as such (-p).
Note: It is the fact that ls -tp always outputs file / directory names only, not full paths, that necessitates the subshell approach mentioned above for targeting a directory other than the current one ((cd /path/to && ls -tp ...)).
grep -v '/$' then weeds out directories from the resulting listing, by omitting (-v) lines that have a trailing / (/$).
Caveat: Since a symlink that points to a directory is technically not itself a directory, such symlinks will not be excluded.
tail -n +6 skips the first 5 entries in the listing, in effect returning all but the 5 most recently modified files, if any.
Note that in order to exclude N files, N+1 must be passed to tail -n +.
xargs -I {} rm -- {} (and its variations) then invokes on rm on all these files; if there are no matches at all, xargs won't do anything.
xargs -I {} rm -- {} defines placeholder {} that represents each input line as a whole, so rm is then invoked once for each input line, but with filenames with embedded spaces handled correctly.
-- in all cases ensures that any filenames that happen to start with - aren't mistaken for options by rm.
A variation on the original problem, in case the matching files need to be processed individually or collected in a shell array:
# One by one, in a shell loop (POSIX-compliant):
ls -tp | grep -v '/$' | tail -n +6 | while IFS= read -r f; do echo "$f"; done
# One by one, but using a Bash process substitution (<(...),
# so that the variables inside the `while` loop remain in scope:
while IFS= read -r f; do echo "$f"; done < <(ls -tp | grep -v '/$' | tail -n +6)
# Collecting the matches in a Bash *array*:
IFS=$'\n' read -d '' -ra files < <(ls -tp | grep -v '/$' | tail -n +6)
printf '%s\n' "${files[#]}" # print array elements
Remove all but 5 (or whatever number) of the most recent files in a directory.
rm `ls -t | awk 'NR>5'`
(ls -t|head -n 5;ls)|sort|uniq -u|xargs rm
This version supports names with spaces:
(ls -t|head -n 5;ls)|sort|uniq -u|sed -e 's,.*,"&",g'|xargs rm
Simpler variant of thelsdj's answer:
ls -tr | head -n -5 | xargs --no-run-if-empty rm
ls -tr displays all the files, oldest first (-t newest first, -r reverse).
head -n -5 displays all but the 5 last lines (ie the 5 newest files).
xargs rm calls rm for each selected file.
find . -maxdepth 1 -type f -printf '%T# %p\0' | sort -r -z -n | awk 'BEGIN { RS="\0"; ORS="\0"; FS="" } NR > 5 { sub("^[0-9]*(.[0-9]*)? ", ""); print }' | xargs -0 rm -f
Requires GNU find for -printf, and GNU sort for -z, and GNU awk for "\0", and GNU xargs for -0, but handles files with embedded newlines or spaces.
All these answers fail when there are directories in the current directory. Here's something that works:
find . -maxdepth 1 -type f | xargs -x ls -t | awk 'NR>5' | xargs -L1 rm
This:
works when there are directories in the current directory
tries to remove each file even if the previous one couldn't be removed (due to permissions, etc.)
fails safe when the number of files in the current directory is excessive and xargs would normally screw you over (the -x)
doesn't cater for spaces in filenames (perhaps you're using the wrong OS?)
ls -tQ | tail -n+4 | xargs rm
List filenames by modification time, quoting each filename. Exclude first 3 (3 most recent). Remove remaining.
EDIT after helpful comment from mklement0 (thanks!): corrected -n+3 argument, and note this will not work as expected if filenames contain newlines and/or the directory contains subdirectories.
Ignoring newlines is ignoring security and good coding. wnoise had the only good answer. Here is a variation on his that puts the filenames in an array $x
while IFS= read -rd ''; do
x+=("${REPLY#* }");
done < <(find . -maxdepth 1 -printf '%T# %p\0' | sort -r -z -n )
For Linux (GNU tools), an efficient & robust way to keep the n newest files in the current directory while removing the rest:
n=5
find . -maxdepth 1 -type f -printf '%T# %p\0' |
sort -z -nrt ' ' -k1,1 |
sed -z -e "1,${n}d" -e 's/[^ ]* //' |
xargs -0r rm -f
For BSD, find doesn't have the -printf predicate, stat can't output NULL bytes, and sed + awk can't handle NULL-delimited records.
Here's a solution that doesn't support newlines in paths but that safeguards against them by filtering them out:
#!/bin/bash
n=5
find . -maxdepth 1 -type f ! -path $'*\n*' -exec stat -f '%.9Fm %N' {} + |
sort -nrt ' ' -k1,1 |
awk -v n="$n" -F'^[^ ]* ' 'NR > n {printf "%s%c", $2, 0}' |
xargs -0 rm -f
note: I'm using bash because of the $'\n' notation. For sh you can define a variable containing a literal newline and use it instead.
Solution for UNIX & Linux (inspired from AIX/HP-UX/SunOS/BSD/Linux ls -b):
Some platforms don't provide find -printf, nor stat, nor support NUL-delimited records with stat/sort/awk/sed/xargs. That's why using perl is probably the most portable way to tackle the problem, because it is available by default in almost every OS.
I could have written the whole thing in perl but I didn't. I only use it for substituting stat and for encoding-decoding-escaping the filenames. The core logic is the same as the previous solutions and is implemented with POSIX tools.
note: perl's default stat has a resolution of a second, but starting from perl-5.8.9 you can get sub-second resolution with the stat function of the module Time::HiRes (when both the OS and the filesystem support it). That's what I'm using here; if your perl doesn't provide it then you can remove the ‑MTime::HiRes=stat from the command line.
n=5
find . '(' -name '.' -o -prune ')' -type f -exec \
perl -MTime::HiRes=stat -le '
foreach (#ARGV) {
#st = stat($_);
if ( #st > 0 ) {
s/([\\\n])/sprintf( "\\%03o", ord($1) )/ge;
print sprintf( "%.9f %s", $st[9], $_ );
}
else { print STDERR "stat: $_: $!"; }
}
' {} + |
sort -nrt ' ' -k1,1 |
sed -e "1,${n}d" -e 's/[^ ]* //' |
perl -l -ne '
s/\\([0-7]{3})/chr(oct($1))/ge;
s/(["\n])/"\\$1"/g;
print "\"$_\"";
' |
xargs -E '' sh -c '[ "$#" -gt 0 ] && rm -f "$#"' sh
Explanations:
For each file found, the first perl gets the modification time and outputs it along the encoded filename (each newline and backslash characters are replaced with the literals \012 and \134 respectively).
Now each time filename is guaranteed to be single-line, so POSIX sort and sed can safely work with this stream.
The second perl decodes the filenames and escapes them for POSIX xargs.
Lastly, xargs calls rm for deleting the files. The sh command is a trick that prevents xargs from running rm when there's no files to delete.
I realize this is an old thread, but maybe someone will benefit from this. This command will find files in the current directory :
for F in $(find . -maxdepth 1 -type f -name "*_srv_logs_*.tar.gz" -printf '%T# %p\n' | sort -r -z -n | tail -n+5 | awk '{ print $2; }'); do rm $F; done
This is a little more robust than some of the previous answers as it allows to limit your search domain to files matching expressions. First, find files matching whatever conditions you want. Print those files with the timestamps next to them.
find . -maxdepth 1 -type f -name "*_srv_logs_*.tar.gz" -printf '%T# %p\n'
Next, sort them by the timestamps:
sort -r -z -n
Then, knock off the 4 most recent files from the list:
tail -n+5
Grab the 2nd column (the filename, not the timestamp):
awk '{ print $2; }'
And then wrap that whole thing up into a for statement:
for F in $(); do rm $F; done
This may be a more verbose command, but I had much better luck being able to target conditional files and execute more complex commands against them.
If the filenames don't have spaces, this will work:
ls -C1 -t| awk 'NR>5'|xargs rm
If the filenames do have spaces, something like
ls -C1 -t | awk 'NR>5' | sed -e "s/^/rm '/" -e "s/$/'/" | sh
Basic logic:
get a listing of the files in time order, one column
get all but the first 5 (n=5 for this example)
first version: send those to rm
second version: gen a script that will remove them properly
With zsh
Assuming you don't care about present directories and you will not have more than 999 files (choose a bigger number if you want, or create a while loop).
[ 6 -le `ls *(.)|wc -l` ] && rm *(.om[6,999])
In *(.om[6,999]), the . means files, the o means sort order up, the m means by date of modification (put a for access time or c for inode change), the [6,999] chooses a range of file, so doesn't rm the 5 first.
Adaptation of #mklement0's excellent answer with some parameters and without needing to navigate to the folder containing the files to be deleted...
TARGET_FOLDER="/my/folder/path"
FILES_KEEP=5
ls -tp "$TARGET_FOLDER"**/* | grep -v '/$' | tail -n +$((FILES_KEEP+1)) | xargs -d '\n' -r rm --
[Ref(s).: https://stackoverflow.com/a/3572628/3223785 ]
Thanks! 😉
found interesting cmd in Sed-Onliners - Delete last 3 lines - fnd it perfect for another way to skin the cat (okay not) but idea:
#!/bin/bash
# sed cmd chng #2 to value file wish to retain
cd /opt/depot
ls -1 MyMintFiles*.zip > BigList
sed -n -e :a -e '1,2!{P;N;D;};N;ba' BigList > DeList
for i in `cat DeList`
do
echo "Deleted $i"
rm -f $i
#echo "File(s) gonzo "
#read junk
done
exit 0
Removes all but the 10 latest (most recents) files
ls -t1 | head -n $(echo $(ls -1 | wc -l) - 10 | bc) | xargs rm
If less than 10 files no file is removed and you will have :
error head: illegal line count -- 0
To count files with bash
I needed an elegant solution for the busybox (router), all xargs or array solutions were useless to me - no such command available there. find and mtime is not the proper answer as we are talking about 10 items and not necessarily 10 days. Espo's answer was the shortest and cleanest and likely the most unversal one.
Error with spaces and when no files are to be deleted are both simply solved the standard way:
rm "$(ls -td *.tar | awk 'NR>7')" 2>&-
Bit more educational version: We can do it all if we use awk differently. Normally, I use this method to pass (return) variables from the awk to the sh. As we read all the time that can not be done, I beg to differ: here is the method.
Example for .tar files with no problem regarding the spaces in the filename. To test, replace "rm" with the "ls".
eval $(ls -td *.tar | awk 'NR>7 { print "rm \"" $0 "\""}')
Explanation:
ls -td *.tar lists all .tar files sorted by the time. To apply to all the files in the current folder, remove the "d *.tar" part
awk 'NR>7... skips the first 7 lines
print "rm \"" $0 "\"" constructs a line: rm "file name"
eval executes it
Since we are using rm, I would not use the above command in a script! Wiser usage is:
(cd /FolderToDeleteWithin && eval $(ls -td *.tar | awk 'NR>7 { print "rm \"" $0 "\""}'))
In the case of using ls -t command will not do any harm on such silly examples as: touch 'foo " bar' and touch 'hello * world'. Not that we ever create files with such names in real life!
Sidenote. If we wanted to pass a variable to the sh this way, we would simply modify the print (simple form, no spaces tolerated):
print "VarName="$1
to set the variable VarName to the value of $1. Multiple variables can be created in one go. This VarName becomes a normal sh variable and can be normally used in a script or shell afterwards. So, to create variables with awk and give them back to the shell:
eval $(ls -td *.tar | awk 'NR>7 { print "VarName=\""$1"\"" }'); echo "$VarName"
leaveCount=5
fileCount=$(ls -1 *.log | wc -l)
tailCount=$((fileCount - leaveCount))
# avoid negative tail argument
[[ $tailCount < 0 ]] && tailCount=0
ls -t *.log | tail -$tailCount | xargs rm -f
I made this into a bash shell script. Usage: keep NUM DIR where NUM is the number of files to keep and DIR is the directory to scrub.
#!/bin/bash
# Keep last N files by date.
# Usage: keep NUMBER DIRECTORY
echo ""
if [ $# -lt 2 ]; then
echo "Usage: $0 NUMFILES DIR"
echo "Keep last N newest files."
exit 1
fi
if [ ! -e $2 ]; then
echo "ERROR: directory '$1' does not exist"
exit 1
fi
if [ ! -d $2 ]; then
echo "ERROR: '$1' is not a directory"
exit 1
fi
pushd $2 > /dev/null
ls -tp | grep -v '/' | tail -n +"$1" | xargs -I {} rm -- {}
popd > /dev/null
echo "Done. Kept $1 most recent files in $2."
ls $2|wc -l
Modified version of the answer of #Fabien if you want to specify a path. Useful if you're running the script elsewhere.
ls -tr /path/foo/ | head -n -5 | xargs -I% --no-run-if-empty rm /path/foo/%