In my bash script I have an external (received from user) string, which I should use in sed pattern.
REPLACE="<funny characters here>"
sed "s/KEYWORD/$REPLACE/g"
How can I escape the $REPLACE string so it would be safely accepted by sed as a literal replacement?
NOTE: The KEYWORD is a dumb substring with no matches etc. It is not supplied by user.
Warning: This does not consider newlines. For a more in-depth answer, see this SO-question instead. (Thanks, Ed Morton & Niklas Peter)
Note that escaping everything is a bad idea. Sed needs many characters to be escaped to get their special meaning. For example, if you escape a digit in the replacement string, it will turn in to a backreference.
As Ben Blank said, there are only three characters that need to be escaped in the replacement string (escapes themselves, forward slash for end of statement and & for replace all):
ESCAPED_REPLACE=$(printf '%s\n' "$REPLACE" | sed -e 's/[\/&]/\\&/g')
# Now you can use ESCAPED_REPLACE in the original sed statement
sed "s/KEYWORD/$ESCAPED_REPLACE/g"
If you ever need to escape the KEYWORD string, the following is the one you need:
sed -e 's/[]\/$*.^[]/\\&/g'
And can be used by:
KEYWORD="The Keyword You Need";
ESCAPED_KEYWORD=$(printf '%s\n' "$KEYWORD" | sed -e 's/[]\/$*.^[]/\\&/g');
# Now you can use it inside the original sed statement to replace text
sed "s/$ESCAPED_KEYWORD/$ESCAPED_REPLACE/g"
Remember, if you use a character other than / as delimiter, you need replace the slash in the expressions above wih the character you are using. See PeterJCLaw's comment for explanation.
Edited: Due to some corner cases previously not accounted for, the commands above have changed several times. Check the edit history for details.
The sed command allows you to use other characters instead of / as separator:
sed 's#"http://www\.fubar\.com"#URL_FUBAR#g'
The double quotes are not a problem.
The only three literal characters which are treated specially in the replace clause are / (to close the clause), \ (to escape characters, backreference, &c.), and & (to include the match in the replacement). Therefore, all you need to do is escape those three characters:
sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
Example:
$ export REPLACE="'\"|\\/><&!"
$ echo fooKEYWORDbar | sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
foo'"|\/><&!bar
Based on Pianosaurus's regular expressions, I made a bash function that escapes both keyword and replacement.
function sedeasy {
sed -i "s/$(echo $1 | sed -e 's/\([[\/.*]\|\]\)/\\&/g')/$(echo $2 | sed -e 's/[\/&]/\\&/g')/g" $3
}
Here's how you use it:
sedeasy "include /etc/nginx/conf.d/*" "include /apps/*/conf/nginx.conf" /etc/nginx/nginx.conf
It's a bit late to respond... but there IS a much simpler way to do this. Just change the delimiter (i.e., the character that separates fields). So, instead of s/foo/bar/ you write s|bar|foo.
And, here's the easy way to do this:
sed 's|/\*!50017 DEFINER=`snafu`#`localhost`\*/||g'
The resulting output is devoid of that nasty DEFINER clause.
It turns out you're asking the wrong question. I also asked the wrong question. The reason it's wrong is the beginning of the first sentence: "In my bash script...".
I had the same question & made the same mistake. If you're using bash, you don't need to use sed to do string replacements (and it's much cleaner to use the replace feature built into bash).
Instead of something like, for example:
function escape-all-funny-characters() { UNKNOWN_CODE_THAT_ANSWERS_THE_QUESTION_YOU_ASKED; }
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A="$(escape-all-funny-characters 'KEYWORD')"
B="$(escape-all-funny-characters '<funny characters here>')"
OUTPUT="$(sed "s/$A/$B/g" <<<"$INPUT")"
you can use bash features exclusively:
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A='KEYWORD'
B='<funny characters here>'
OUTPUT="${INPUT//"$A"/"$B"}"
Use awk - it is cleaner:
$ awk -v R='//addr:\\file' '{ sub("THIS", R, $0); print $0 }' <<< "http://file:\_THIS_/path/to/a/file\\is\\\a\\ nightmare"
http://file:\_//addr:\file_/path/to/a/file\\is\\\a\\ nightmare
Here is an example of an AWK I used a while ago. It is an AWK that prints new AWKS. AWK and SED being similar it may be a good template.
ls | awk '{ print "awk " "'"'"'" " {print $1,$2,$3} " "'"'"'" " " $1 ".old_ext > " $1 ".new_ext" }' > for_the_birds
It looks excessive, but somehow that combination of quotes works to keep the ' printed as literals. Then if I remember correctly the vaiables are just surrounded with quotes like this: "$1". Try it, let me know how it works with SED.
These are the escape codes that I've found:
* = \x2a
( = \x28
) = \x29
" = \x22
/ = \x2f
\ = \x5c
' = \x27
? = \x3f
% = \x25
^ = \x5e
sed is typically a mess, especially the difference between gnu-sed and bsd-sed
might just be easier to place some sort of sentinel at the sed side, then a quick pipe over to awk, which is far more flexible in accepting any ERE regex, escaped hex, or escaped octals.
e.g. OFS in awk is the true replacement ::
date | sed -E 's/[0-9]+/\xC1\xC0/g' |
mawk NF=NF FS='\xC1\xC0' OFS='\360\237\244\241'
1 Tue Aug 🤡 🤡:🤡:🤡 EDT 🤡
(tested and confirmed working on both BSD-sed and GNU-sed - the emoji isn't a typo that's what those 4 bytes map to in UTF-8 )
There are dozens of answers out there... If you don't mind using a bash function schema, below is a good answer. The objective below was to allow using sed with practically any parameter as a KEYWORD (F_PS_TARGET) or as a REPLACE (F_PS_REPLACE). We tested it in many scenarios and it seems to be pretty safe. The implementation below supports tabs, line breaks and sigle quotes for both KEYWORD and replace REPLACE.
NOTES: The idea here is to use sed to escape entries for another sed command.
CODE
F_REVERSE_STRING_R=""
f_reverse_string() {
: 'Do a string reverse.
To undo just use a reversed string as STRING_INPUT.
Args:
STRING_INPUT (str): String input.
Returns:
F_REVERSE_STRING_R (str): The modified string.
'
local STRING_INPUT=$1
F_REVERSE_STRING_R=$(echo "x${STRING_INPUT}x" | tac | rev)
F_REVERSE_STRING_R=${F_REVERSE_STRING_R%?}
F_REVERSE_STRING_R=${F_REVERSE_STRING_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/2705678/3223785 ]
F_POWER_SED_ECP_R=""
f_power_sed_ecp() {
: 'Escape strings for the "sed" command.
Escaped characters will be processed as is (e.g. /n, /t ...).
Args:
F_PSE_VAL_TO_ECP (str): Value to be escaped.
F_PSE_ECP_TYPE (int): 0 - For the TARGET value; 1 - For the REPLACE value.
Returns:
F_POWER_SED_ECP_R (str): Escaped value.
'
local F_PSE_VAL_TO_ECP=$1
local F_PSE_ECP_TYPE=$2
# NOTE: Operational characters of "sed" will be escaped, as well as single quotes.
# By Questor
if [ ${F_PSE_ECP_TYPE} -eq 0 ] ; then
# NOTE: For the TARGET value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[]\/$*.^[]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
else
# NOTE: For the REPLACE value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[\/&]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
fi
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R%?}
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/24134488/3223785 ,
# https://stackoverflow.com/a/21740695/3223785 ,
# https://unix.stackexchange.com/a/655558/61742 ,
# https://stackoverflow.com/a/11461628/3223785 ,
# https://stackoverflow.com/a/45151986/3223785 ,
# https://linuxaria.com/pills/tac-and-rev-to-see-files-in-reverse-order ,
# https://unix.stackexchange.com/a/631355/61742 ]
F_POWER_SED_R=""
f_power_sed() {
: 'Facilitate the use of the "sed" command. Replaces in files and strings.
Args:
F_PS_TARGET (str): Value to be replaced by the value of F_PS_REPLACE.
F_PS_REPLACE (str): Value that will replace F_PS_TARGET.
F_PS_FILE (Optional[str]): File in which the replacement will be made.
F_PS_SOURCE (Optional[str]): String to be manipulated in case "F_PS_FILE" was
not informed.
F_PS_NTH_OCCUR (Optional[int]): [1~n] - Replace the nth match; [n~-1] - Replace
the last nth match; 0 - Replace every match; Default 1.
Returns:
F_POWER_SED_R (str): Return the result if "F_PS_FILE" is not informed.
'
local F_PS_TARGET=$1
local F_PS_REPLACE=$2
local F_PS_FILE=$3
local F_PS_SOURCE=$4
local F_PS_NTH_OCCUR=$5
if [ -z "$F_PS_NTH_OCCUR" ] ; then
F_PS_NTH_OCCUR=1
fi
local F_PS_REVERSE_MODE=0
if [ ${F_PS_NTH_OCCUR} -lt -1 ] ; then
F_PS_REVERSE_MODE=1
f_reverse_string "$F_PS_TARGET"
F_PS_TARGET="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_REPLACE"
F_PS_REPLACE="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_SOURCE"
F_PS_SOURCE="$F_REVERSE_STRING_R"
F_PS_NTH_OCCUR=$((-F_PS_NTH_OCCUR))
fi
f_power_sed_ecp "$F_PS_TARGET" 0
F_PS_TARGET=$F_POWER_SED_ECP_R
f_power_sed_ecp "$F_PS_REPLACE" 1
F_PS_REPLACE=$F_POWER_SED_ECP_R
local F_PS_SED_RPL=""
if [ ${F_PS_NTH_OCCUR} -eq -1 ] ; then
# NOTE: We kept this option because it performs better when we only need to replace
# the last occurrence. By Questor
# [Ref(s).: https://linuxhint.com/use-sed-replace-last-occurrence/ ,
# https://unix.stackexchange.com/a/713866/61742 ]
F_PS_SED_RPL="'s/\(.*\)$F_PS_TARGET/\1$F_PS_REPLACE/'"
elif [ ${F_PS_NTH_OCCUR} -gt 0 ] ; then
# [Ref(s).: https://unix.stackexchange.com/a/587924/61742 ]
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/$F_PS_NTH_OCCUR'"
elif [ ${F_PS_NTH_OCCUR} -eq 0 ] ; then
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/g'"
fi
# NOTE: As the "sed" commands below always process literal values for the "F_PS_TARGET"
# so we use the "-z" flag in case it has multiple lines. By Quaestor
# [Ref(s).: https://unix.stackexchange.com/a/525524/61742 ]
if [ -z "$F_PS_FILE" ] ; then
F_POWER_SED_R=$(echo "x${F_PS_SOURCE}x" | eval "sed -z $F_PS_SED_RPL")
F_POWER_SED_R=${F_POWER_SED_R%?}
F_POWER_SED_R=${F_POWER_SED_R#?}
if [ ${F_PS_REVERSE_MODE} -eq 1 ] ; then
f_reverse_string "$F_POWER_SED_R"
F_POWER_SED_R="$F_REVERSE_STRING_R"
fi
else
if [ ${F_PS_REVERSE_MODE} -eq 0 ] ; then
eval "sed -i -z $F_PS_SED_RPL \"$F_PS_FILE\""
else
tac "$F_PS_FILE" | rev | eval "sed -z $F_PS_SED_RPL" | tac | rev > "$F_PS_FILE"
fi
fi
}
MODEL
f_power_sed "F_PS_TARGET" "F_PS_REPLACE" "" "F_PS_SOURCE"
echo "$F_POWER_SED_R"
EXAMPLE
f_power_sed "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" "[ ]+|$/,\"\0\"" "" "Great answer (+1). If you change your awk to awk '{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate that concatenation of the final \", \" then you don't have to go through the gymnastics on eliminating the final record. So: readarray -td '' a < <(awk '{ gsub(/,[ ]+/,\"\0\"); print; }' <<<\"$string\") on Bash that supports readarray. Note your method is Bash 4.4+ I think because of the -d in readar"
echo "$F_POWER_SED_R"
IF YOU JUST WANT TO ESCAPE THE PARAMETERS TO THE SED COMMAND
MODEL
# "TARGET" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 0
echo "$F_POWER_SED_ECP_R"
# "REPLACE" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 1
echo "$F_POWER_SED_ECP_R"
IMPORTANT: If the strings for KEYWORD and/or replace REPLACE contain tabs or line breaks you will need to use the "-z" flag in your "sed" command. More details here.
EXAMPLE
f_power_sed_ecp "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" 0
echo "$F_POWER_SED_ECP_R"
f_power_sed_ecp "[ ]+|$/,\"\0\"" 1
echo "$F_POWER_SED_ECP_R"
NOTE: The f_power_sed_ecp and f_power_sed functions above was made available completely free as part of this project ez_i - Create shell script installers easily!.
Standard recommendation here: use perl :)
echo KEYWORD > /tmp/test
REPLACE="<funny characters here>"
perl -pi.bck -e "s/KEYWORD/${REPLACE}/g" /tmp/test
cat /tmp/test
don't forget all the pleasure that occur with the shell limitation around " and '
so (in ksh)
Var=">New version of \"content' here <"
printf "%s" "${Var}" | sed "s/[&\/\\\\*\\"']/\\&/g' | read -r EscVar
echo "Here is your \"text\" to change" | sed "s/text/${EscVar}/g"
If the case happens to be that you are generating a random password to pass to sed replace pattern, then you choose to be careful about which set of characters in the random string. If you choose a password made by encoding a value as base64, then there is is only character that is both possible in base64 and is also a special character in sed replace pattern. That character is "/", and is easily removed from the password you are generating:
# password 32 characters log, minus any copies of the "/" character.
pass=`openssl rand -base64 32 | sed -e 's/\///g'`;
If you are just looking to replace Variable value in sed command then just remove
Example:
sed -i 's/dev-/dev-$ENV/g' test to sed -i s/dev-/dev-$ENV/g test
I have an improvement over the sedeasy function, which WILL break with special characters like tab.
function sedeasy_improved {
sed -i "s/$(
echo "$1" | sed -e 's/\([[\/.*]\|\]\)/\\&/g'
| sed -e 's:\t:\\t:g'
)/$(
echo "$2" | sed -e 's/[\/&]/\\&/g'
| sed -e 's:\t:\\t:g'
)/g" "$3"
}
So, whats different? $1 and $2 wrapped in quotes to avoid shell expansions and preserve tabs or double spaces.
Additional piping | sed -e 's:\t:\\t:g' (I like : as token) which transforms a tab in \t.
An easier way to do this is simply building the string before hand and using it as a parameter for sed
rpstring="s/KEYWORD/$REPLACE/g"
sed -i $rpstring test.txt
I have the following printf command that works correctly adding 5 spaces after the string ABC and then prints string "DEF".
printf '%s%*s' "ABC" 5 '' "DEF"
I'd like to add a newline character at the end, after the string DEF, but I don't know how to do it. I've tried without success in these ways:
user /d
$ printf '%s%*s' "ABC" 5 '' "DEF\n"
ABC DEF\n
user /d
$ printf '%s%*s\n' "ABC" 5 '' "DEF"
ABC
DEF
How should be done? thanks in advance
Add another String placeholder for DEF and a new line character:
printf '%s%*s%s\n' "ABC" 5 '' "DEF"
You may use $'\n' to get a newline:
printf '%s%*s' "ABC" 5 '' $'DEF\n'
It didn't work with
printf '%s%*s\n' "ABC" 5 '' "DEF"
because printf format is one short of total arguments. First %s is used for ABC and then %*s is used to output 5 spaces. But there is no format for DEF hence \n is appended to both the arguments.
I'm doing my first bash coding and I have a String like this :
""987653547660485627"",""987653547660485626"",""987653547660485625""
Is there any way to change every iteration of "" into singles to make it look like:
"987653547660485627","987653547660485626","987653547660485625"
I guess you were facing the problem of double-quotes.
You need to escape the double quotes:
kent$ echo $foo
""foo"",""bar""
kent$ echo "${foo//\"\"/\"}"
"foo","bar"
sed can replace string pattern:
orig='""987653547660485627"",""987653547660485626"",""987653547660485625""'
echo $orig | sed 's/""/"/g'
Will yield:
"987653547660485627","987653547660485626","987653547660485625"
The description of the argument to sed is "Replace every instance of "" with ", including multiple times in each row"
I'm trying to convert a string that has either - (hyphen) or _ (underscore) to Capital_Case string.
#!/usr/bin/env sh
function cap_case() {
[ $# -eq 1 ] || return 1;
_str=$1;
_capitalize=${_str//[-_]/_} | sed -E 's/(^|_)([a-zA-Z])/\u\2/g'
echo "Capitalize:"
echo $_capitalize
return 0
}
read string
echo $(cap_case $string)
But I don't get anything out.
First I am replacing any occurrence of - and _ with _ ${_str//[-_]/_}, and then I pipe that string to sed which finds the first letter, or _ as the first group, and then the letter after the first group in the second group, and I want to uppercase the found letter with \u\2. I tried with \U\2 but that didn't work as well.
I want the string some_string to become
Some_String
And string some-string to become
Some_String
I'm on a mac, using zsh if that is helpful.
EDIT: More generic solution here to make each field's first letter Capital.
echo "some_string_other" | awk -F"_" '{for(i=1;i<=NF;i++){$i=toupper(substr($i,1,1)) substr($i,2)}} 1' OFS="_"
Following awk may help you.
echo "some_string" | awk -F"_" '{$1=toupper(substr($1,1,1)) substr($1,2);$2=toupper(substr($2,1,1)) substr($2,2)} 1' OFS="_"
Output will be as follows.
echo "some_string" | awk -F"_" '{$1=toupper(substr($1,1,1)) substr($1,2);$2=toupper(substr($2,1,1)) substr($2,2)} 1' OFS="_"
Some_String
This being zsh, you don't need sed (or even a function, really):
$ s=some-string-bar
$ print ${(C)s:gs/-/_}
Some_String_Bar
The (C) flag capitalizes words (where "words" are defined as sequences of alphanumeric characters separated by other characters); :gs/-/_ replaces hyphens with underscores.
If you really want a function, it's cap_case () { print ${(C)1:gs/-/_} }.
pure bash:
#!/bin/bash
camel_case(){
local d display string
declare -a strings # = scope local
[ "$2" ] && d="$2" || d=" " # optional output delimiter
ifs_ini="$IFS"
IFS+='_-' # we keep initial IFS
strings=( "$1" ) # array
for string in ${strings[#]} ; do
display+="${string^}$d"
done
echo "${display%$d}"
IFS="$ifs_ini"
}
camel_case "some-string_here" "_"
camel_case "some-string_here some strings here" "+"
camel_case "some-string_here some strings here"
echo "$BASH_VERSION"
exit
output:
Some_String_Here
Some+String+Here+Some+Strings+Here
Some String Here Some Strings Here
4.4.18(1) release
You can try this gnu sed
echo 'some_other-string' | sed -E 's/(^.)/\u&/;s/[_-](.)/_\u\1/g'
Explains :
s/(^.)/\u&/
(^.) match the first char and \u& put the match in capital letter.
s/[_-](.)/_\u\1/g
[_-](.) capture a char preceded by _ or - and replace it by _ and the matched char in capital letter.
The g at the end tell sed to make the replacement for each char which meet the criteria
You didn't assign to _capitalize - you set a _capitalize environment variable for the empty command that you piped into sed.
You probably meant
_capitalize=$(<<<"${_str//[-_]/_}" sed -E 's/(^|_)([a-zA-Z])/\1\u\2/g')
Note also that ${//} isn't standard shell, so you really ought to specify an interpreter other than sh.
A simpler approach would be simply:
#!/bin/sh
cap_case() {
printf "Capitalize: "
echo "$*" | sed -e 'y/-/_/' -e 's/\(^\|_\)[[:alpha:]]/\U&/g'
}
echo $(cap_case "snake_case")
Note that the \u / \U replacement is a GNU extension to sed - if you're using a non-GNU implementation, check whether it supports this feature.
I have a string in a shell/bash script. I want to print the string with all its "special characters" (eg. newlines, tabs, etc.) printed as literal escape sequences (eg. a newline is printed as \n, a tab is printed as \t, and so on).
(Not sure if I'm using the correct terminology; the example should hopefully clarify things.)
Example
The desired output of...
a="foo\t\tbar"
b="foo bar"
print_escape_seq "$a"
print_escape_seq "$b"
...is:
foo\t\tbar
foo\t\tbar
$a and $b are strings that were read in from a text file.
There are two tab characters between foo and bar in the $b variable.
An attempt
This is what I've tried:
#!/bin/sh
print_escape_seq() {
str=$(printf "%q\n" $1)
str=${str/\/\//\/}
echo $str
}
a="foo\t\tbar"
b="foo bar"
print_escape_seq "$a"
print_escape_seq "$b"
The output is:
foo\t\tbar
foo bar
So, it doesn't work for $b.
Is there an entirely straightforward way to accomplish this that I've missed completely?
Bash has a string quoting operation ${var#Q}
Here is some example code
bash_encode () {
esc=${1#Q}
echo "${esc:2:-1}"
}
testval=$(printf "hello\t\tworld")
set | grep "^testval="
echo "The encoded value of testval is" $(bash_encode "$testval")
Here is the output
testval=$'hello\t\tworld'
The encoded value of testval is hello\t\tworld
You will need to create a search and replace pattern for each binary value you wish to replace. Something like this:
#!/bin/bash
esc() {
# space char after //
v=${1// /\\s}
# tab character after //
v=${v// /\\t}
echo $v
}
esc "hello world"
esc "hello world"
This outputs
hello\sworld
hello\tworld
I required something similar for file paths, and I realized that ls -1b does the work, but in the research I found this solution in stackoverflow which is closer to what you were requiring.
Command to escape a string in bash
just compile it with gcc -o "escapify" escapify.c