error: failed to write bytecode to F:\substrate-node-template\substrate-node-template-master\target\release\wbuild\node-template-runtime\target\wasm32-unknown-unknown\release\deps\pallet_transaction_payment_rpc_runtime_api-927dd9f7f5859937.pallet_transaction_payment_rpc_runtime_api.a5dcb31e-cgu.0.rcgu.bc: The system cannot find the path specified. (os error 3)
enter image description here
Note that Windows systems have a restriction on path length, and sometimes substrate runs into this! Better to put your build folder closer to your root dir to minimize path length. More in this issue(https://github.com/substrate-developer-hub/substrate-node-template/issues/185)
it's a dup question, though.
Related
I’m trying to run the following command to generate grpc files:
protoc --proto_path=$PROTO_PATH --plugin=protoc-gen-grpc=$PLUGIN_GRPC --grpc_out=$OUT/grpc $PROTO_FILES
This results in the following error:
/Users/MYUSERNAME/Downloads/protoc-gen-grpc-java-1.48.1-osx-aarch_64.exe: program not found or is not executable
Please specify a program using absolute path or make sure the program is available in your PATH system variable
--grpc_out: protoc-gen-grpc: Plugin failed with status code 1.
I made sure the file from the error message is located at that path and has also the correct permissions.
-rwxrwxrwx# 1 MYUSERNAME staff 6334176 10 Aug 00:03 protoc-gen-grpc-java-1.48.1-osx-aarch_64.exe
I also tried running the command as sudo.
Generating java or kotlin files with --java_out=$OUT/java --kotlin_out=$OUT/kotlin
works perfectly fine, so the problem is --grpc_out=$OUT/grpc
I also downloaded multiple versions of the protoc-gen-grpc-java-1.48.1-osx-aarch_64.exe file but it always results in the same error. I also tried replacing all path variables (e.g. $PROTO_PATH) with their corresponding values, without any effect. I’m using MacBook with M1Pro chip.
The problem is that M1 Macs aren't supported. They have copied over the osx-x86_64 binary and renamed it for osx-aarch_64 as a workaround to make it easier to run with Rosetta. See here for where that change was made and here for the full conversation about supporting M1 Macs.
When trying to use octeract with pyomo, I uncounter the following error.
2022-06-22 15:48:44,451 [ WARNING][pyomo.opt] Failed to create solver with name 'octeract-engine':
Failed to set executable for solver asl. File with name=octeract-engine either does not exist or it is not executable. To skip this validation, call set_executable with validate=False.
[...]
The SolverFactory was unable to create the solver "octeract-engine"
and returned an UnknownSolver object. This error is raised at the point
where the UnknownSolver object was used as if it were valid (by calling
method "solve").
The original solver was created with the following parameters:
executable: octeract-engine
type: octeract-engine
_args: ()
options: {}
I've tried following both octerat doc and this doc unsuccessfully.
This is the classic Pyomo message when the binary it's told to invoke (in this case octeract-engine) is not in the system PATH.
You can fix this by adding the engine to the PATH. The way to verify that this was done correctly is to start up the terminal that you use to invoke Pyomo (e.g. linux terminal or powershell), and type octeract-engine (linux) or octeract-engine.exe (windows). If the engine is in the PATH, this will print the engine's help menu, otherwise the system will complain that the binary was not found.
What's actually happening here is that Octeract Engine connects to Pyomo through an ASL interface. Pyomo simply looks for a binary in the system PATH with the "name" specified in the command. As long as that binary has an ASL interface, it will just work, however Pyomo leaves it up to the user to ensure that the binary is visible in the PATH.
Our installers actually add the binary to the PATH on all platforms by default for this reason, so try a clean reinstall and see if that fixes your issue. Otherwise, it's likely that you don't have the right permissions set up on your machine i.e., the Python version that runs Pyomo doesn't see the right PATH (e.g. if you use octeract-engine.exe on powershell but run Pyomo from cmd.exe).
Can somebody help me with this
Image here
Sorry because I am not having enough reputation. =)
This error say :
Path too long
When you extract compressed files from the installation media, you might see a Error 0x80010135: File path too long error.
The error is caused when you use Windows Explorer or WinZip to extract files and it encounters a file path that exceeds the maximum character limit.
To resolve this problem, use a decompression utility such as 7-Zip, that can handle long file paths. Otherwise, extract the files to the root directory or to the c:/temp directory.
I'm running Qt 5.3.1 on Mac OS X 10.8 and 10.9 I'm trying to use the macdeployqt tool to bundle libraries and plugins with my executable, but it's apparently trying to include everything on my hard drive.
I invoke it with:
/Applications/Qt/5.3.1/5.3/clang_64/bin/macdeployqt /Users/adamwilt/Desktop/temp/DesktopPixie.app -verbose=2
-qmldir=/Users/adamwilt/Desktop/temp/DesktopPixie.app/Contents/Resources/qml/DesktopPixie
and get lots of normal, expected log messages like:
Log: copy: "/Applications/Qt/5.3.1/5.3/clang_64/qml/QtQuick/Controls/Styles/Base/images" "/Users/adamwilt/Desktop/temp/DesktopPixie.app/Contents/Resources/qml/QtQuick/Controls/Styles/Base/images"
...and all runs fine until I start getting messages like:
Log: copy: "" "/Users/adamwilt/Desktop/temp/DesktopPixie.app/Contents/Resources/qml/MessageBoxUI/Enums"
ERROR: file copy failed from "/do-gst"
ERROR: to "/Users/adamwilt/Desktop/temp/DesktopPixie.app/Contents/Resources/qml/MessageBoxUI/Enums/do-gst"
ERROR: file copy failed from "/rescuepro.properties"
ERROR: to "/Users/adamwilt/Desktop/temp/DesktopPixie.app/Contents/Resources/qml/MessageBoxUI/Enums/rescuepro.properties"
ERROR: file copy failed from "/rescuepro34act.lic"
and then the fun begins:
Log: copy: "/Applications" "/Users/adamwilt/Desktop/temp/DesktopPixie.app/Contents/Resources/qml/MessageBoxUI/Enums/Applications"
Log: copied: "/Applications/License.rtf"
Log: to "/Users/adamwilt/Desktop/temp/DesktopPixie.app/Contents/Resources/qml/MessageBoxUI/Enums/Applications/License.rtf"
Log: copy: "/Applications/0xED-1.0.7.app" "/Users/adamwilt/Desktop/temp/DesktopPixie.app/Contents/Resources/qml/MessageBoxUI/Enums/Applications/0xED-1.0.7.app"
It appears it's trying to copy everything (that is, "") into the app, but I ^C out of it while I still have disk space left!
It didn't do this at first; then it did so for a week; then it stopped; now it's back. This is a distributed development project; I'm doing the QML stuff and folks elsewhere are doing the C++. It's possible the other folks are changing a configuration somewhere that's causing this to occur, but I'm the only one doing Mac deployments, so I'm the only one who sees this.
Is there a config file of some sort for macdeployqt where this might be getting triggered? Or is it more likely a problem related to the C++ object MessageBoxUI, which defines several Q_ENUMs (apparently correctly, as it compiles without warnings or errors, and appears to run properly), since that's the target directory when it starts going mad?
Sussed it (well enough that I can go on):
The Qt app I'm trying to deploy lives in ~/Desktop/temp. If I set my current directory to ~/Desktop or ~/Desktop/temp before I run macdeployqt, it runs as expected.
If I run it from from my home directory ~, or ~/Documents, macdeployqt tries to pull in everything it finds in /Applications, /opt, and/or other directories unassociated with the app.
Setting cwd to most other paths, including ~/Downloads, /Applications, subdirectories of ~/Documents, etc. also seems to work; it's only running macdeployqt from ~ and ~/Documents that causes the problem.
No proper explanation as to why this is happening, but just a warning in case someone else sees this sort of weird behavior: try changing to the apps's location before running macdeployqt.
I have a funny problem on my machine
Windows 7 x64, using QT 5.2 for the GUI
I'm not able to start the app I always receive the error
First I thought I had a broken dll, so through some trial and error I found a solution:
I add the QT5Core.dll via enviroment path, and NOT directly to the app folder. Then the programm works. If I copy the dll back to the app Folder, Same problem as before!?!?!?1
I'm really confused, because the error only occurs on my machine?
Debugging doesn't really help,
In code, the error occures here:
MyApplication::MYApplication(int argc, char** argv, int version)
: QApplication(argc, argv, version) // <<< this call fails!
{ }
somebody can help me?
Why is the location of the qt5core.dll a problem?!?!?
UPDATE
I used the profiling function of depends and found the following behaviour:
Failing
GetProcAddress(0x76800000 [c:\windows\syswow64\KERNEL32.DLL], "CreateSymbolicLinkW") called from > "dirone\xxxx.EXE" at address 0x00FF2877 and returned 0x7688CCE9.
First chance exception 0xE06D7363 (Microsoft C++ Exception) occurred in "c:\windows\syswow64\KERNELBASE.DLL" at address 0x765CC41F.
Exception: "bad allocation"
Working
LoadLibraryW("C:\BuildPackages\QT\plugins\platforms\qwindows.dll") called from "dirtwo\QT5CORE.DLL" at address 0x66AA5154.
Loaded "c:\buildpackages\qt\plugins\platforms\QWINDOWS.DLL" at address
0x0F380000. Successfully hooked module.
somehow the path to the qwindows.dll is hardcoded into the dll (there is no environment path to this directory)
If I rename the qwindows.dll or delete it, startup failes again.
BUT the qwindows.dll is bundeld with our product. It is in a subdirectory ./platforms/
AND the files are the same (diff returns equal)
Somebody have some clue what I should try next?
Check if you already have some qt related environmental variables.
Crashes are usually due to this, remove those envronmental variables first. Check whether you have any other qt installed libraries.
it would be better if you can post the cal stacks.
Some other dlls are needed that reside in the directory of the qt5core.dll. When you add this path to the search path the dlls are found. When you simply copy the dll these dlls can not be found. You can check dependencies with the depends tool.
Candidates for the additional dlls are:
icuin51.dll and icuuc51.dll
Found the Problem:
The enviromentvariable:
QT_QPA_PLATFORM_PLUGIN_PATH=C:\BuildPackages\QT\plugins\platforms
was set to the path. If removing this variable, everything works as it should!