I have integration tests in golang that I want to run in the vscode debugger. After some laying around I got this to mostly function using the launch.json configuration
"version": "0.2.0",
"configurations": [
{
"name": "debug entities test",
"type": "go",
"request": "launch",
"mode": "test",
"program": "${workspaceFolder}/targetingd/integration/entities_integration_test.go",
"buildFlags": "-tags=integration",
"env": {
"PULL_REGISTRY": "xxxx"
}
}
However I say this 'mostly' works because it's actually running the full integration test suite, not just entities_integration_test.go as I wanted. I'd like to configure this to only run one test file and not waste time on the rest.
I know if I was running this from the command line I could use the --run tag but I'm not sure what the equivalent is within the launch.json.
I don't know if it matters but were using both suite and dlv for these tests.
I am trying to debug a Rust program in VS Code, but I get an error:
After clicking OK, VS Code opens "settings.json":
I have these extensions installed:
My program is a simple "hello world" app.
Unfortunately VS Code can't debug Rust out of the box :( But no need to worry, just few steps of configuration will do the work :)
Steps
Install C/C++ extension if you are on windows and CodeLLDB if on OS X/Linux
Click Debug -> Add Configuration, a launch.json file should open, you need to change the program name here manually
{
"version": "0.2.0",
"configurations": [
{
"name": "(Windows) Launch",
"type": "cppvsdbg",
"request": "launch",
"program": "${workspaceRoot}/target/debug/foo.exe",
"args": [],
"stopAtEntry": false,
"cwd": "${workspaceRoot}",
"environment": [],
"externalConsole": true
},
{
"name": "(OSX) Launch",
"type": "lldb",
"request": "launch",
"program": "${workspaceRoot}/target/debug/foo",
"args": [],
"cwd": "${workspaceRoot}",
}
]
}
Make sure Allow setting breakpoints in any file is checkend under File -> Preferences -> Settings
For detailed steps and more you can refer the article I used to answer this
Credits- Forrest Smith
From your screenshots, you're on Windows, so here's how to proceed. This assumes you already took care of the basics:
VsCode has the recommended rust-analyzer extension installed.
Your project folder was initialized with cargo init. (Your project's folder name must be the same as the name of your package in Cargo.toml.)
You can cargo run from within your project directory and it works.
As indicated by various locations on the 'Net, you need to install another VsCode extension to make it so you can debug. Since you're on Windows, you want to use the MS C++ DevTools extension for VsCode, instead of the CodeLLDB one.
Next, you need a "launch" configuration setup. Select VsCode's Run >>> Add Configuration... menu item. Choose the C/C++: (Windows) launch option in the drop-down. You'll now have a launch.json file with a single configuration object.
You'll need to change the program property to "${workspaceFolder}/target/debug/${workspaceFolderBasename}.exe"; this depends on your package name being the same as the project folder's name. (I also changed the cwd property to "${workspaceFolder}", though I'm not sure it matters.) To be clearer, here's the configuration I have presently in my launch.json file (the preLaunchTask property is for later):
{
"name": "(Windows) Launch",
"type": "cppvsdbg",
"request": "launch",
"program": "${workspaceFolder}/target/debug/${workspaceFolderBasename}.exe",
"preLaunchTask": "rust: cargo build",
"args": [],
"stopAtEntry": false,
"cwd": "${workspaceFolder}",
"environment": [],
"console": "externalTerminal"
}
At this point, as long as you've already built your project at least once, you can hit F5 and debug.
If you want F5 to also save your changes and rebuild your project before debugging, then you also have to add a build task and configure it to run before debugging starts.
To do that, add the build task by opening the Show All Commands box (either F1 or Ctrl+Shift+p) and choosing Tasks: Configure Task. Select rust: cargo build. It'll create a tasks.json file next to your launch.json; the defaults are all you need. My file looks like this:
{
"version": "2.0.0",
"tasks": [
{
"type": "cargo",
"command": "build",
"problemMatcher": [
"$rustc"
],
"group": "build",
"label": "rust: cargo build"
}
]
}
Then, to hook everything up, you just need to manually add the preLaunchTask property to your launch configuration with a value equal to the label in your task. E.g. "preLaunchTask": "rust: cargo build",, like what I have in my example launch.json up above.
At this point, whenever you press F5, VsCode will save your work, rebuild your project, then start debugging it.
Visual Studio Code is a general editor, but it can be configured to debug rust code.
Step 1.
Assuming that Visual Code, rust and cargo are installed, the first step is to enable the required extensions:
rust-analyzer
CodeLLDB
These only need to be installed one.
Step 2
The second step is to create the rust code. I have a folder called Rust, in which I keep the rust code. Changing to that folder, I use cargo new hello_world to create a new rust project.
Step 3
The third step is to change the folder for the project. There are two plausible options, but only one of them will work.
I changed to my Rust folder, and then I can edit the source code by following ``hello_world - src`.
To debug the code, it is necessary to create a launch.json file, using Run - Add configuration... However, the file isn't correct, with <your program> where the correct name should be. This is the wrong approach.
{
// Use IntelliSense to learn about possible attributes.
// Hover to view descriptions of existing attributes.
// For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
"version": "0.2.0",
"configurations": [
{
"type": "lldb",
"request": "launch",
"name": "Debug",
"program": "${workspaceFolder}/<your program>",
"args": [],
"cwd": "${workspaceFolder}"
}
]
}
The documentation is a bid thin at this point. The correct approach is to pick a different folder, the top level of the project hello_world. The Cargo.toml file is available.
Now, when Run - Add configuration... is used, and the option of LLDB is selected -
the Cargo.toml file can be picked up -
and then the Cargo.toml file is used to correctly build the launch.json file -
{
// Use IntelliSense to learn about possible attributes.
// Hover to view descriptions of existing attributes.
// For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
"version": "0.2.0",
"configurations": [
{
"type": "lldb",
"request": "launch",
"name": "Debug executable 'hello_world'",
"cargo": {
"args": [
"build",
"--bin=hello_world",
"--package=hello_world"
],
"filter": {
"name": "hello_world",
"kind": "bin"
}
},
"args": [],
"cwd": "${workspaceFolder}"
},
{
"type": "lldb",
"request": "launch",
"name": "Debug unit tests in executable 'hello_world'",
"cargo": {
"args": [
"test",
"--no-run",
"--bin=hello_world",
"--package=hello_world"
],
"filter": {
"name": "hello_world",
"kind": "bin"
}
},
"args": [],
"cwd": "${workspaceFolder}"
}
]
}
Now, both Run - Start debugging and Run - Run without Debugging both work properly.
I have a golang cobra cli app. have configured my vscode for debugging. I want to debug a specific command using vscode for my application.
I am using this launch.json
{
"name": "Launch Package",
"type": "go",
"request": "launch",
"mode": "debug",
"program": "${fileDirname}"
}
If I select main.go and start debugging it just prints the help for my command. How can I debug a particular cli subcommand in vscode? Like say abc create or abc version
If I select a subcommand package and then debug it says : Failed to launch :could not launch process:not an executalbe file
You can configure the VSCode launch configuration to pass arguments using:
{
"name": "Launch Package",
"type": "go",
"request": "launch",
"mode": "debug",
"program": "${fileDirname}"
"args": ["arg1", ...]
}
Note that you may prefer to write the path to your main go file in the program field so that you can run/debug no matter what file you are currently on.
Reference:
launch.json: https://code.visualstudio.com/docs/editor/debugging#_launchjson-attributes
VSCode Variables: https://code.visualstudio.com/docs/editor/variables-reference
Trying to debug a minitest test on a non-rails ruby application and I have the following config in the launch.json file:
{
"name": "Debug a rake task",
"type": "Ruby",
"request": "launch",
"useBundler": true,
"cwd": "${workspaceRoot}",
"showDebuggerOutput": true,
"pathToBundler": "/home/user/.rbenv/versions/2.5.5/bin/bundle",
"pathToRDebugIDE": "/home/user/.rbenv/versions/2.5.5/bin/rdebug-ide",
"program": "/home/user/.rbenv/versions/2.5.5/bin/rake",
"args": [
"test",
],
"env": {
"LOG_LEVEL": "debug",
"TEST": "test_file.rb",
"TESTOPTS": "--name=test_name",
}
},
Even though the breakpoints of the Rakefile are hit, neither the breakpoints of test_file.rb nor the breakpoints within the app are hit.
I suspect this might be because rake task are called as separate processes but I couldn't figure out how to handle this case. How can I make the debugger stop at the breakpoints of the app and the test files?
PS: I use byebug at the moment; however, it doesn't replace a IDE based debugger.
I usually run go test ./... to run all tests in my project.
How can I set up launch.json to debug every tests that normally go test ./... runs?
Assuming you're using the Go extension for VSCode:
As the vscode-go's documentation says, you could use the following:
{
"name": "Launch test package",
"type": "go",
"request": "launch",
"mode": "test",
"program": "${workspaceFolder}"
}
Note that you're specifying a new mode called "test".
You have to install delve in order to debug code using VSCode. You can install it by yourself or use the Go: Install/Update Tools command from VSCode. Read the documentation I mention first for more information.
This one should work
{
"name": "Launch test package",
"type": "go",
"request": "launch",
"mode": "test",
"program": "${workspaceFolder}/controllers"
}