I'm trying to move my website over to AWS. I set up EC2 but I can't find a way to access the dev site I've set up to allow me to test it works before I switch over. The stack is Laravel/Forge and Nginx.
I have assigned an Elastic IP address, and I've enabled HTTP access via port 80. But when I go to the IP address it redirects to the live domain itself.
Same thing when I use the Public IPv4 DNS (ec2-<IP address>.compute-1.amazonaws.com).
I've been battling with it for some time. Can anyone advise what I'm doing wrong.
Related
I've just begun the setup of proxmox for our none profit educational VPS service. However, the problem we're facing is a lack of IPv4 addresses available to us.
Is it possible to route a sub-domain to the host servers IP address and then get that forwarded to the individual containers accordingly. For example:
SSH root#node-123.w-a-s-d.me
Will allow a client with the VM ID of 123 to access their server
And the same goes for things like: node-123.w-a-s-d.me
This would be the web address allowing any applications running on port 80 for that specific node
I'm unsure how to go about this and have looked online with no luck. I hope our goal is clear. I look forward to hearing from you. Josh
Exposing SSH that way will not be easy as you can only have one thing listening on port 22 for every given IP address, and while you could just adding random ports to each VPS and the forward it from primary box which holds public IP (and vms are behind nat) this is not exactly the best solution.
What you may want to do instead is set up one public-facing box that people can ssh into via public IP and from it SSH to subsequent private machines by their internal IP. Alternatively you can set that box with openVPN and set it to assign internal IP address to anyone connecting via it. While openVPN takes more time to set up right, it can come with it's own DNS so when connected to it calling out SSH root#node-123.w-a-s-d.me will automatically route you to the private IP address rather than the shared public facing one.
With HTTP this is much easier as you can set up a proxy on the front-facing machines which then proxies requests for given sub domain to specific internal IP address.
I have setup ratchet on amazon EC2 instance.
It is running fine, but I am not able to connect with the public IP address of the instance as well as the url.
Following is the screenshot showing ratchet is running.
You need to make sure that the service is running on the right IP address (not only on 127.0.0.1) and that you enabled access in the security group to that particular port.
I am able to host website in IIS 8 but not with ip add. The binding with ip and browsing the site in chrome gives 'ERR_NETWORK_ACCESS_DENIED'
http://localhost - works
http://10.111.148.133/ - does not work.
Seems you are using your public IP.
You can browse using your local IP address. Your local IP address should be some thing like 192.168.xxx.xxx .
You can check your local Ip address using the following command in command prompt.
ipconfig/all
if you want to access your site using public ip, then you need to port forward from your public IP to localIp by setting the DMZ Host in your router.
Along with the above answer, try going through your Firewall settings on the host computer and enabling anything related to IIS or port 80.
You can easily figure out if your antivirus or firewall is the issue by temporarily disabling it.
However, I think your issue is that you grabbed your public IP address, off whatsmyip.com or something, you just need to exec ipconfig to see what your local IP is.
I am creating an android client app connected to a Java server using sockets. At the moment I am working both on my pc. How can I upload my Java server to an online server so I can set my app to friends and test it?
I used OpenShift but could figure our how and if I can use it for what I want.
Also I looked at Amazon ec2, but they need credit card information, something that I would prefer not sharing for this.
Is there any way I can do this for free?
Thanks
Make sure you have a computer able to connect to the internet, and that can run 24/7. Then run your server on that computer, assume you run it on port 8080. Make sure that your host computer's IP address is it to static, otherwise DHCP will give it a different IP every time it connects to the router.
To allow your friends to connect, unless if they're on the same LAN as your host, you will need to port forward port 80 -> ComputerIP:8080 on your router. Once that's done, you will need to retrieve your router's global IPv4 address from it's configuration page and then send that to your friends.
If they're on the same LAN as your host, then you can just give them the IP address of your host computer.
If you port forwarded your server and you would like to get a host name, like stackoverflow.com, you're going to need to buy that from whoever owns the host name you would like to use. I don't know many details about how to update the DNS servers though.
If your server is local and you would like a host name, then just go onto your router configurations page and tell it to automatically assign each computer the default gateway as the primary DNS and then add a mapping in the router's DNS settings to map the host name to your computer's local IPv4 address. Note that not all routers support this feature.
Edit: You'll also need a good bandwidth to support multiple simultaneous connections.
I tried putting my IP from whatismyip.com in the urlbase of Bugzilla but it did not work. I wasn't able to create a new account for my team mate, and he wasnt able to access the server by typing the my ip address in his browse. And surely, when I connect again, my IP address will change. Do we have to buy a www address to host Bugzilla?
You can setup a dynamic dns service, for example via http://www.dyndns.com or http://www.no-ip.com or http://freedns.afraid.org to solve the changing ip problem without buying a domain (or buying a domain as well, but it's not a requirement).
But the real problem is that your team mate cannot access the server via the current IP address which points to either a misconfiguration of the webserver (listening only on localhost?), to a firewall in between, or most likely, that port forwarding isn't set up in your router for requests coming to your external IP address to be forwarded to the machine where you have Bugzilla set up. Additionally, you must set the urlbase to your local IP address, not to the external IP address, as blak3r says.
Check http://www.portforward.com for instructions on how to do port forwarding. But don't forget that everything mentioned has to be working:
Web server listening to outside requests: This can be tested from the same internal network via the local network IP address (what you see typing in a command line console ipconfig in Windows and ifconfig in Linux). If you can connect from a different machine on the same network via the local IP address, this is solved.
Firewalls (in router and the webserver machine) accepting connections to the web server port: For firewalls in the web server, the same test as above covers it.
Port forwarding so the router forwards the requests received on the web server port to the web server machine: This gets tested in the same way as firewalls in the router, that is, you must have your friend (or yourself from the house of your friend) try to connect to the dyn dns name set up or to the external IP as reported by whatsmyip.org.
This is all assuming your test mate is not on your same network, if he is, just using the local IP address (shown via ipconfig or ifconfig) instead of the external IP address and making sure the first step is covered (web server listening to outside requests) should be enough and nothing else is needed!
You most likely do not have your port 80 forwarded to your machine which is the reason he cannot connect when using the IP that was returned from whatismyip.com.
Assuming you're on a windows box... do
Start->Run->cmd then type
ipconfig
If your address starts with 192...* or 10...* this is your Local Area Network (LAN) IP. If this is the case, then your isp provided you with a router. Look for a setting called port forwarding or "application setting" which allows you to forward all incoming traffic on your router to a particular IP address. Go into your router's configuration settings and make sure port 80 (and maybe 443 if you're using ssl are forwarded to your local ip).
The other problem you mentioned is you do not have a static IP. This is a common problem and no you do not need to buy an address. There are several sites which can provide you a free dynamic dns host. Try no-ip.org.