Imprint an Image above a video's canvas [duplicate] - ffmpeg

Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
The community reviewed whether to reopen this question 4 months ago and left it closed:
Original close reason(s) were not resolved
Improve this question
I have two videos of the same exact length, and I would like to use ffmpeg to stack them into one video file.
How can I do this?

Use the vstack (vertical), hstack (horizontal), or xstack (custom layout) filters. It is easier and faster than other methods.
Combine/stack two videos or images
Vertical
Using the vstack filter.
ffmpeg -i input0 -i input1 -filter_complex vstack=inputs=2 output
Videos must have the same width.
Horizontal
Using the hstack filter.
ffmpeg -i input0 -i input1 -filter_complex hstack=inputs=2 output
Videos must have the same height.
With a border
Using the pad filter. This examples creates a 5px black border between the two sides.
ffmpeg -i input0 -i input1 -filter_complex "[0]pad=iw+5:color=black[left];[left][1]hstack=inputs=2" output
With audio
Downmix and use original channel placements
Add the amerge filter to combine the audio channels from both inputs:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];[0:a][1:a]amerge=inputs=2[a]" -map "[v]" -map "[a]" -ac 2 output
This assumes each input contains a stereo audio stream.
-ac 2 is included to downmix to stereo in case both inputs contain multi-channel audio. For example, if both inputs are stereo, you would get a 4-channel output audio stream instead of stereo if you omit -ac 2.
Put all audio from each input into separate channels
Use amerge (or amix) and pan filters:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];[0:a][1:a]amerge=inputs=2,pan=stereo|c0<c0+c1|c1<c2+c3[a]" -map "[v]" -map "[a]" output
This assumes each input contains a stereo audio stream.
Using audio from one particular input
This example will use the audio from input1:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v]" -map "[v]" -map 1:a output
Adding silent audio / If one input does not have audio
If you mix inputs that have audio and inputs that do not have audio then amerge will fail because each input needs audio. You can add silent audio with the anullsrc filter to prevent this:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];anullsrc[silent];[0:a][silent]amerge=inputs=2[a]" -map "[v]" -map "[a]" -ac 2 output.mp4
3 videos or images
ffmpeg -i input0 -i input1 -i input2 -filter_complex "[0:v][1:v][2:v]hstack=inputs=3[v]" -map "[v]" output
If you want vertical use vstack instead of hstack.
2x2 grid
Using xstack
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex "[0:v][1:v][2:v][3:v]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v]" -map "[v]" output
Using hstack and vstack
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex "[0:v][1:v]hstack=inputs=2[top];[2:v][3:v]hstack=inputs=2[bottom];[top][bottom]vstack=inputs=2[v]" -map "[v]" output
This syntax is easier to understand, but less efficient than using xstack as shown above.
2x2 grid with text
Using the drawtext filter:
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex
"[0]drawtext=text='vid0':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v0];
[1]drawtext=text='vid1':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v1];
[2]drawtext=text='vid2':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v2];
[3]drawtext=text='vid3':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v3];
[v0][v1][v2][v3]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v]"
-map "[v]" output
4x4
Use the xstack filter. Example for a total of 16 videos:
ffmpeg -i input0 -i input1 -i input2 -i input3 -i input4 -i input5 -i input6 -i input7 -i input8 -i input9 -i input10 -i input11 -i input12 -i input13 -i input14 -i input15 -i input16 -filter_complex "[0:v][1:v][2:v][3:v][4:v][5:v][6:v][7:v][8:v][9:v][10:v][11:v][12:v][13:v][14:v][15:v]xstack=inputs=16:layout=0_0|w0_0|w0+w1_0|w0+w1+w2_0|0_h0|w4_h0|w4+w5_h0|w4+w5+w6_h0|0_h0+h4|w8_h0+h4|w8+w9_h0+h4|w8+w9+w10_h0+h4|0_h0+h4+h8|w12_h0+h4+h8|w12+w13_h0+h4+h8|w12+w13+w14_h0+h4+h8" output.mp4
If you need to scale the inputs first:
ffmpeg -i input0 -i input1 -i input2 -i input3 -i input4 -i input5 -i input6 -i input7 -i input8 -i input9 -i input10 -i input11 -i input12 -i input13 -i input14 -i input15 -i input16 -filter_complex "[0:v]scale=iw/4:-1[v0];[1:v]scale=iw/4:-1[v1];[2:v]scale=iw/4:-1[v2];[3:v]scale=iw/4:-1[v3];[4:v]scale=iw/4:-1[v4];[5:v]scale=iw/4:-1[v5];[6:v]scale=iw/4:-1[v6];[7:v]scale=iw/4:-1[v7];[8:v]scale=iw/4:-1[v8];[9:v]scale=iw/4:-1[v9];[10:v]scale=iw/4:-1[v10];[11:v]scale=iw/4:-1[v11];[12:v]scale=iw/4:-1[v12];[13:v]scale=iw/4:-1[v13];[14:v]scale=iw/4:-1[v14];[15:v]scale=iw/4:-1[v15];[v0][v1][v2][v3][v4][v5][v6][v7][v8][v9][v10][v11][v12][v13][v14][v15]xstack=inputs=16:layout=0_0|w0_0|w0+w1_0|w0+w1+w2_0|0_h0|w4_h0|w4+w5_h0|w4+w5+w6_h0|0_h0+h4|w8_h0+h4|w8+w9_h0+h4|w8+w9+w10_h0+h4|0_h0+h4+h8|w12_h0+h4+h8|w12+w13_h0+h4+h8|w12+w13+w14_h0+h4+h8" output.mp4
Resize/scale an input
Since both videos need to have the same with for vstack, and the same height for hstack, you may need to scale one of the other videos to match the other:
Simple scale filter example to set width of input0 to 640 and automatically set height while preserving the aspect ratio:
ffmpeg -i input0 -i input2 -filter_complex "[0:v]scale=640:-1[v0];[v0][1:v]vstack=inputs=2" output
For a more advanced method to fit any size video into a specific size while preserving aspect ratio see Resizing videos with ffmpeg to fit into static sized player.
You can also use the scale2ref filter to automatically resize one video to match the dimensions of the other.
Delaying/pausing videos
This example will play the top left video while pausing the others. Once the top left video ends the top right video will play and so on.
Use the tpad, adelay, xstack, and amix filters:
ffmpeg -i top-left.mp4 -i top-right.mp4 -i bottom-left.mp4 -i bottom-right.mp4 -filter_complex "[1]tpad=start_mode=clone:start_duration=5[tr];[2]tpad=start_mode=clone:start_duration=10[bl];[3]tpad=start_mode=clone:start_duration=15[br];[0][tr][bl][br]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v];[1:a]adelay=5s:all=true[a1];[2:a]adelay=10s:all=true[a2];[3:a]adelay=15s:all=true[a3];[0:a][a1][a2][a3]amix=inputs=4[a]" -map "[v]" -map "[a]" output.mp4
This example assumes each input is 5 seconds duration. Adjust start_duration and adelay values as needed.
This command requires FFmpeg 4.3 or newer.
If you don't like the complexity of xstack you can use several hstack/vstack instead as shown in Example 4: 2x2 grid.

See this answer to this question for a newer, simpler way to do this.
Old version:
You should be able to do this using the pad, movie and overlay filters in FFmpeg. The command will look something like this:
ffmpeg -i top.mov -vf 'pad=iw:2*ih [top]; movie=bottom.mov [bottom]; \
[top][bottom] overlay=0:main_h/2' stacked.mov
First the movie that should be on top is padded to twice its height. Then the bottom movie is loaded. Then the bottom movie is overlaid on the padded top movie at an offset of half the padded movie's height.

For 2 videos:
ffmpeg -i 1.mp4 -i 2.mp4 -filter_complex hstack out.mp4
For more videos(3 in this example):
ffmpeg -i 1.mp4 -i 2.mp4 -i 3.mp4 -filter_complex hstack=3 out.mp4

Related

ffmpeg: overlaying two videos is deliting audio from one

i'm trying to overlay two videos with ffmpeg, but in the output there is only the audio of the first video.
Using
ffmpeg -i screen.mkv -vf "movie=webcam.mp4, scale=600: -1 [inner]; [in][inner] overlay = main_w - (overlay_w + 10) : main_h - (overlay_h + 10)" output.mp4
from cmd, in the final output i have only the audio from the first video specfied (screen.mkv).
how can i solve?
Use 2 inputs, a complex filtergraph, and -map output options:
-i webcam.mp4
-i screen.mkv
-filter_complex [0:v]scale=600:-1[inner];
[1:v][inner]overlay=main_w-(overlay_w+10):main_h-(overlay_h+10)[vout]
-map [vout] -map 0:a output.mp4

FFmpeg - Create Thumbnail Grid from Videos [duplicate]

Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
The community reviewed whether to reopen this question 4 months ago and left it closed:
Original close reason(s) were not resolved
Improve this question
I have two videos of the same exact length, and I would like to use ffmpeg to stack them into one video file.
How can I do this?
Use the vstack (vertical), hstack (horizontal), or xstack (custom layout) filters. It is easier and faster than other methods.
Combine/stack two videos or images
Vertical
Using the vstack filter.
ffmpeg -i input0 -i input1 -filter_complex vstack=inputs=2 output
Videos must have the same width.
Horizontal
Using the hstack filter.
ffmpeg -i input0 -i input1 -filter_complex hstack=inputs=2 output
Videos must have the same height.
With a border
Using the pad filter. This examples creates a 5px black border between the two sides.
ffmpeg -i input0 -i input1 -filter_complex "[0]pad=iw+5:color=black[left];[left][1]hstack=inputs=2" output
With audio
Downmix and use original channel placements
Add the amerge filter to combine the audio channels from both inputs:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];[0:a][1:a]amerge=inputs=2[a]" -map "[v]" -map "[a]" -ac 2 output
This assumes each input contains a stereo audio stream.
-ac 2 is included to downmix to stereo in case both inputs contain multi-channel audio. For example, if both inputs are stereo, you would get a 4-channel output audio stream instead of stereo if you omit -ac 2.
Put all audio from each input into separate channels
Use amerge (or amix) and pan filters:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];[0:a][1:a]amerge=inputs=2,pan=stereo|c0<c0+c1|c1<c2+c3[a]" -map "[v]" -map "[a]" output
This assumes each input contains a stereo audio stream.
Using audio from one particular input
This example will use the audio from input1:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v]" -map "[v]" -map 1:a output
Adding silent audio / If one input does not have audio
If you mix inputs that have audio and inputs that do not have audio then amerge will fail because each input needs audio. You can add silent audio with the anullsrc filter to prevent this:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];anullsrc[silent];[0:a][silent]amerge=inputs=2[a]" -map "[v]" -map "[a]" -ac 2 output.mp4
3 videos or images
ffmpeg -i input0 -i input1 -i input2 -filter_complex "[0:v][1:v][2:v]hstack=inputs=3[v]" -map "[v]" output
If you want vertical use vstack instead of hstack.
2x2 grid
Using xstack
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex "[0:v][1:v][2:v][3:v]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v]" -map "[v]" output
Using hstack and vstack
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex "[0:v][1:v]hstack=inputs=2[top];[2:v][3:v]hstack=inputs=2[bottom];[top][bottom]vstack=inputs=2[v]" -map "[v]" output
This syntax is easier to understand, but less efficient than using xstack as shown above.
2x2 grid with text
Using the drawtext filter:
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex
"[0]drawtext=text='vid0':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v0];
[1]drawtext=text='vid1':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v1];
[2]drawtext=text='vid2':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v2];
[3]drawtext=text='vid3':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v3];
[v0][v1][v2][v3]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v]"
-map "[v]" output
4x4
Use the xstack filter. Example for a total of 16 videos:
ffmpeg -i input0 -i input1 -i input2 -i input3 -i input4 -i input5 -i input6 -i input7 -i input8 -i input9 -i input10 -i input11 -i input12 -i input13 -i input14 -i input15 -i input16 -filter_complex "[0:v][1:v][2:v][3:v][4:v][5:v][6:v][7:v][8:v][9:v][10:v][11:v][12:v][13:v][14:v][15:v]xstack=inputs=16:layout=0_0|w0_0|w0+w1_0|w0+w1+w2_0|0_h0|w4_h0|w4+w5_h0|w4+w5+w6_h0|0_h0+h4|w8_h0+h4|w8+w9_h0+h4|w8+w9+w10_h0+h4|0_h0+h4+h8|w12_h0+h4+h8|w12+w13_h0+h4+h8|w12+w13+w14_h0+h4+h8" output.mp4
If you need to scale the inputs first:
ffmpeg -i input0 -i input1 -i input2 -i input3 -i input4 -i input5 -i input6 -i input7 -i input8 -i input9 -i input10 -i input11 -i input12 -i input13 -i input14 -i input15 -i input16 -filter_complex "[0:v]scale=iw/4:-1[v0];[1:v]scale=iw/4:-1[v1];[2:v]scale=iw/4:-1[v2];[3:v]scale=iw/4:-1[v3];[4:v]scale=iw/4:-1[v4];[5:v]scale=iw/4:-1[v5];[6:v]scale=iw/4:-1[v6];[7:v]scale=iw/4:-1[v7];[8:v]scale=iw/4:-1[v8];[9:v]scale=iw/4:-1[v9];[10:v]scale=iw/4:-1[v10];[11:v]scale=iw/4:-1[v11];[12:v]scale=iw/4:-1[v12];[13:v]scale=iw/4:-1[v13];[14:v]scale=iw/4:-1[v14];[15:v]scale=iw/4:-1[v15];[v0][v1][v2][v3][v4][v5][v6][v7][v8][v9][v10][v11][v12][v13][v14][v15]xstack=inputs=16:layout=0_0|w0_0|w0+w1_0|w0+w1+w2_0|0_h0|w4_h0|w4+w5_h0|w4+w5+w6_h0|0_h0+h4|w8_h0+h4|w8+w9_h0+h4|w8+w9+w10_h0+h4|0_h0+h4+h8|w12_h0+h4+h8|w12+w13_h0+h4+h8|w12+w13+w14_h0+h4+h8" output.mp4
Resize/scale an input
Since both videos need to have the same with for vstack, and the same height for hstack, you may need to scale one of the other videos to match the other:
Simple scale filter example to set width of input0 to 640 and automatically set height while preserving the aspect ratio:
ffmpeg -i input0 -i input2 -filter_complex "[0:v]scale=640:-1[v0];[v0][1:v]vstack=inputs=2" output
For a more advanced method to fit any size video into a specific size while preserving aspect ratio see Resizing videos with ffmpeg to fit into static sized player.
You can also use the scale2ref filter to automatically resize one video to match the dimensions of the other.
Delaying/pausing videos
This example will play the top left video while pausing the others. Once the top left video ends the top right video will play and so on.
Use the tpad, adelay, xstack, and amix filters:
ffmpeg -i top-left.mp4 -i top-right.mp4 -i bottom-left.mp4 -i bottom-right.mp4 -filter_complex "[1]tpad=start_mode=clone:start_duration=5[tr];[2]tpad=start_mode=clone:start_duration=10[bl];[3]tpad=start_mode=clone:start_duration=15[br];[0][tr][bl][br]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v];[1:a]adelay=5s:all=true[a1];[2:a]adelay=10s:all=true[a2];[3:a]adelay=15s:all=true[a3];[0:a][a1][a2][a3]amix=inputs=4[a]" -map "[v]" -map "[a]" output.mp4
This example assumes each input is 5 seconds duration. Adjust start_duration and adelay values as needed.
This command requires FFmpeg 4.3 or newer.
If you don't like the complexity of xstack you can use several hstack/vstack instead as shown in Example 4: 2x2 grid.
See this answer to this question for a newer, simpler way to do this.
Old version:
You should be able to do this using the pad, movie and overlay filters in FFmpeg. The command will look something like this:
ffmpeg -i top.mov -vf 'pad=iw:2*ih [top]; movie=bottom.mov [bottom]; \
[top][bottom] overlay=0:main_h/2' stacked.mov
First the movie that should be on top is padded to twice its height. Then the bottom movie is loaded. Then the bottom movie is overlaid on the padded top movie at an offset of half the padded movie's height.
For 2 videos:
ffmpeg -i 1.mp4 -i 2.mp4 -filter_complex hstack out.mp4
For more videos(3 in this example):
ffmpeg -i 1.mp4 -i 2.mp4 -i 3.mp4 -filter_complex hstack=3 out.mp4

ffmpeg cut a video + make a rescaled preview (proxie)

I would like to cut (mulicut if possible else it's ok) a mp4 and generate the cut + a preview file in 360p.
My goal is to achieve something that looks like that :
`ffmpeg -y -progress /dev/stdout -i media.mp4
-vf "select='+between(t,0,25)',setpts=N/FRAME_RATE/TB"
-af "aselect='+between(t,0,25)’,asetpts=N/SR/TB"
-filter_complex split=2[mvideo][pvideo]
-map [mvideo] media_cut.mp4
-map [pvideo] -vf scale=-1:360 media_preview.mp4`
Here, a first -vf select filter to multicut the media, a split filter to generate both the cut media and a resized cut with a second -vf on scale that keep aspect ratio with a width of 360.
I can't mix filter with filter complex that's why i have no idea how to do it.
Thanks a lot for your tips.
You can do it one of two ways. 1) declare simple filtergraph for each output, or 2) do all filtering inside a complex filtergraph.
#1 Per-output simple filtergraph.
ffmpeg -y -progress /dev/stdout -i media.mp4
-vf "select='between(t,0,25)',setpts=N/FRAME_RATE/TB"
-af "aselect='between(t,0,25)’,asetpts=N/SR/TB"
media_cut.mp4
-vf "select='between(t,0,25)',setpts=N/FRAME_RATE/TB,scale=-2:360"
-af "aselect='between(t,0,25)’,asetpts=N/SR/TB"
media_preview.mp4
#2 A complex filtergraph.
ffmpeg -y -progress /dev/stdout -i media.mp4
-filter_complex
"[0:v]select='between(t,0,25)',setpts=N/FRAME_RATE/TB,split=2[mvideo][pvideo];
[pvideo]scale=-2:360[pvideo];
[0:a]aselect='between(t,0,25)’,asetpts=N/SR/TB,asplit=2[maudio][paudio]"
-map [mvideo] -map [maudio]
media_cut.mp4
-map [pvideo] -map [paudio]
media_preview.mp4

How to combine multiple images horizontally and vertically using ffmpeg [duplicate]

Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
The community reviewed whether to reopen this question 4 months ago and left it closed:
Original close reason(s) were not resolved
Improve this question
I have two videos of the same exact length, and I would like to use ffmpeg to stack them into one video file.
How can I do this?
Use the vstack (vertical), hstack (horizontal), or xstack (custom layout) filters. It is easier and faster than other methods.
Combine/stack two videos or images
Vertical
Using the vstack filter.
ffmpeg -i input0 -i input1 -filter_complex vstack=inputs=2 output
Videos must have the same width.
Horizontal
Using the hstack filter.
ffmpeg -i input0 -i input1 -filter_complex hstack=inputs=2 output
Videos must have the same height.
With a border
Using the pad filter. This examples creates a 5px black border between the two sides.
ffmpeg -i input0 -i input1 -filter_complex "[0]pad=iw+5:color=black[left];[left][1]hstack=inputs=2" output
With audio
Downmix and use original channel placements
Add the amerge filter to combine the audio channels from both inputs:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];[0:a][1:a]amerge=inputs=2[a]" -map "[v]" -map "[a]" -ac 2 output
This assumes each input contains a stereo audio stream.
-ac 2 is included to downmix to stereo in case both inputs contain multi-channel audio. For example, if both inputs are stereo, you would get a 4-channel output audio stream instead of stereo if you omit -ac 2.
Put all audio from each input into separate channels
Use amerge (or amix) and pan filters:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];[0:a][1:a]amerge=inputs=2,pan=stereo|c0<c0+c1|c1<c2+c3[a]" -map "[v]" -map "[a]" output
This assumes each input contains a stereo audio stream.
Using audio from one particular input
This example will use the audio from input1:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v]" -map "[v]" -map 1:a output
Adding silent audio / If one input does not have audio
If you mix inputs that have audio and inputs that do not have audio then amerge will fail because each input needs audio. You can add silent audio with the anullsrc filter to prevent this:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];anullsrc[silent];[0:a][silent]amerge=inputs=2[a]" -map "[v]" -map "[a]" -ac 2 output.mp4
3 videos or images
ffmpeg -i input0 -i input1 -i input2 -filter_complex "[0:v][1:v][2:v]hstack=inputs=3[v]" -map "[v]" output
If you want vertical use vstack instead of hstack.
2x2 grid
Using xstack
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex "[0:v][1:v][2:v][3:v]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v]" -map "[v]" output
Using hstack and vstack
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex "[0:v][1:v]hstack=inputs=2[top];[2:v][3:v]hstack=inputs=2[bottom];[top][bottom]vstack=inputs=2[v]" -map "[v]" output
This syntax is easier to understand, but less efficient than using xstack as shown above.
2x2 grid with text
Using the drawtext filter:
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex
"[0]drawtext=text='vid0':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v0];
[1]drawtext=text='vid1':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v1];
[2]drawtext=text='vid2':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v2];
[3]drawtext=text='vid3':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v3];
[v0][v1][v2][v3]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v]"
-map "[v]" output
4x4
Use the xstack filter. Example for a total of 16 videos:
ffmpeg -i input0 -i input1 -i input2 -i input3 -i input4 -i input5 -i input6 -i input7 -i input8 -i input9 -i input10 -i input11 -i input12 -i input13 -i input14 -i input15 -i input16 -filter_complex "[0:v][1:v][2:v][3:v][4:v][5:v][6:v][7:v][8:v][9:v][10:v][11:v][12:v][13:v][14:v][15:v]xstack=inputs=16:layout=0_0|w0_0|w0+w1_0|w0+w1+w2_0|0_h0|w4_h0|w4+w5_h0|w4+w5+w6_h0|0_h0+h4|w8_h0+h4|w8+w9_h0+h4|w8+w9+w10_h0+h4|0_h0+h4+h8|w12_h0+h4+h8|w12+w13_h0+h4+h8|w12+w13+w14_h0+h4+h8" output.mp4
If you need to scale the inputs first:
ffmpeg -i input0 -i input1 -i input2 -i input3 -i input4 -i input5 -i input6 -i input7 -i input8 -i input9 -i input10 -i input11 -i input12 -i input13 -i input14 -i input15 -i input16 -filter_complex "[0:v]scale=iw/4:-1[v0];[1:v]scale=iw/4:-1[v1];[2:v]scale=iw/4:-1[v2];[3:v]scale=iw/4:-1[v3];[4:v]scale=iw/4:-1[v4];[5:v]scale=iw/4:-1[v5];[6:v]scale=iw/4:-1[v6];[7:v]scale=iw/4:-1[v7];[8:v]scale=iw/4:-1[v8];[9:v]scale=iw/4:-1[v9];[10:v]scale=iw/4:-1[v10];[11:v]scale=iw/4:-1[v11];[12:v]scale=iw/4:-1[v12];[13:v]scale=iw/4:-1[v13];[14:v]scale=iw/4:-1[v14];[15:v]scale=iw/4:-1[v15];[v0][v1][v2][v3][v4][v5][v6][v7][v8][v9][v10][v11][v12][v13][v14][v15]xstack=inputs=16:layout=0_0|w0_0|w0+w1_0|w0+w1+w2_0|0_h0|w4_h0|w4+w5_h0|w4+w5+w6_h0|0_h0+h4|w8_h0+h4|w8+w9_h0+h4|w8+w9+w10_h0+h4|0_h0+h4+h8|w12_h0+h4+h8|w12+w13_h0+h4+h8|w12+w13+w14_h0+h4+h8" output.mp4
Resize/scale an input
Since both videos need to have the same with for vstack, and the same height for hstack, you may need to scale one of the other videos to match the other:
Simple scale filter example to set width of input0 to 640 and automatically set height while preserving the aspect ratio:
ffmpeg -i input0 -i input2 -filter_complex "[0:v]scale=640:-1[v0];[v0][1:v]vstack=inputs=2" output
For a more advanced method to fit any size video into a specific size while preserving aspect ratio see Resizing videos with ffmpeg to fit into static sized player.
You can also use the scale2ref filter to automatically resize one video to match the dimensions of the other.
Delaying/pausing videos
This example will play the top left video while pausing the others. Once the top left video ends the top right video will play and so on.
Use the tpad, adelay, xstack, and amix filters:
ffmpeg -i top-left.mp4 -i top-right.mp4 -i bottom-left.mp4 -i bottom-right.mp4 -filter_complex "[1]tpad=start_mode=clone:start_duration=5[tr];[2]tpad=start_mode=clone:start_duration=10[bl];[3]tpad=start_mode=clone:start_duration=15[br];[0][tr][bl][br]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v];[1:a]adelay=5s:all=true[a1];[2:a]adelay=10s:all=true[a2];[3:a]adelay=15s:all=true[a3];[0:a][a1][a2][a3]amix=inputs=4[a]" -map "[v]" -map "[a]" output.mp4
This example assumes each input is 5 seconds duration. Adjust start_duration and adelay values as needed.
This command requires FFmpeg 4.3 or newer.
If you don't like the complexity of xstack you can use several hstack/vstack instead as shown in Example 4: 2x2 grid.
See this answer to this question for a newer, simpler way to do this.
Old version:
You should be able to do this using the pad, movie and overlay filters in FFmpeg. The command will look something like this:
ffmpeg -i top.mov -vf 'pad=iw:2*ih [top]; movie=bottom.mov [bottom]; \
[top][bottom] overlay=0:main_h/2' stacked.mov
First the movie that should be on top is padded to twice its height. Then the bottom movie is loaded. Then the bottom movie is overlaid on the padded top movie at an offset of half the padded movie's height.
For 2 videos:
ffmpeg -i 1.mp4 -i 2.mp4 -filter_complex hstack out.mp4
For more videos(3 in this example):
ffmpeg -i 1.mp4 -i 2.mp4 -i 3.mp4 -filter_complex hstack=3 out.mp4

Merge MP4 files with ffmpeg [duplicate]

Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
The community reviewed whether to reopen this question 4 months ago and left it closed:
Original close reason(s) were not resolved
Improve this question
I have two videos of the same exact length, and I would like to use ffmpeg to stack them into one video file.
How can I do this?
Use the vstack (vertical), hstack (horizontal), or xstack (custom layout) filters. It is easier and faster than other methods.
Combine/stack two videos or images
Vertical
Using the vstack filter.
ffmpeg -i input0 -i input1 -filter_complex vstack=inputs=2 output
Videos must have the same width.
Horizontal
Using the hstack filter.
ffmpeg -i input0 -i input1 -filter_complex hstack=inputs=2 output
Videos must have the same height.
With a border
Using the pad filter. This examples creates a 5px black border between the two sides.
ffmpeg -i input0 -i input1 -filter_complex "[0]pad=iw+5:color=black[left];[left][1]hstack=inputs=2" output
With audio
Downmix and use original channel placements
Add the amerge filter to combine the audio channels from both inputs:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];[0:a][1:a]amerge=inputs=2[a]" -map "[v]" -map "[a]" -ac 2 output
This assumes each input contains a stereo audio stream.
-ac 2 is included to downmix to stereo in case both inputs contain multi-channel audio. For example, if both inputs are stereo, you would get a 4-channel output audio stream instead of stereo if you omit -ac 2.
Put all audio from each input into separate channels
Use amerge (or amix) and pan filters:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];[0:a][1:a]amerge=inputs=2,pan=stereo|c0<c0+c1|c1<c2+c3[a]" -map "[v]" -map "[a]" output
This assumes each input contains a stereo audio stream.
Using audio from one particular input
This example will use the audio from input1:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v]" -map "[v]" -map 1:a output
Adding silent audio / If one input does not have audio
If you mix inputs that have audio and inputs that do not have audio then amerge will fail because each input needs audio. You can add silent audio with the anullsrc filter to prevent this:
ffmpeg -i input0 -i input1 -filter_complex "[0:v][1:v]vstack=inputs=2[v];anullsrc[silent];[0:a][silent]amerge=inputs=2[a]" -map "[v]" -map "[a]" -ac 2 output.mp4
3 videos or images
ffmpeg -i input0 -i input1 -i input2 -filter_complex "[0:v][1:v][2:v]hstack=inputs=3[v]" -map "[v]" output
If you want vertical use vstack instead of hstack.
2x2 grid
Using xstack
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex "[0:v][1:v][2:v][3:v]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v]" -map "[v]" output
Using hstack and vstack
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex "[0:v][1:v]hstack=inputs=2[top];[2:v][3:v]hstack=inputs=2[bottom];[top][bottom]vstack=inputs=2[v]" -map "[v]" output
This syntax is easier to understand, but less efficient than using xstack as shown above.
2x2 grid with text
Using the drawtext filter:
ffmpeg -i input0 -i input1 -i input2 -i input3 -filter_complex
"[0]drawtext=text='vid0':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v0];
[1]drawtext=text='vid1':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v1];
[2]drawtext=text='vid2':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v2];
[3]drawtext=text='vid3':fontsize=20:x=(w-text_w)/2:y=(h-text_h)/2[v3];
[v0][v1][v2][v3]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v]"
-map "[v]" output
4x4
Use the xstack filter. Example for a total of 16 videos:
ffmpeg -i input0 -i input1 -i input2 -i input3 -i input4 -i input5 -i input6 -i input7 -i input8 -i input9 -i input10 -i input11 -i input12 -i input13 -i input14 -i input15 -i input16 -filter_complex "[0:v][1:v][2:v][3:v][4:v][5:v][6:v][7:v][8:v][9:v][10:v][11:v][12:v][13:v][14:v][15:v]xstack=inputs=16:layout=0_0|w0_0|w0+w1_0|w0+w1+w2_0|0_h0|w4_h0|w4+w5_h0|w4+w5+w6_h0|0_h0+h4|w8_h0+h4|w8+w9_h0+h4|w8+w9+w10_h0+h4|0_h0+h4+h8|w12_h0+h4+h8|w12+w13_h0+h4+h8|w12+w13+w14_h0+h4+h8" output.mp4
If you need to scale the inputs first:
ffmpeg -i input0 -i input1 -i input2 -i input3 -i input4 -i input5 -i input6 -i input7 -i input8 -i input9 -i input10 -i input11 -i input12 -i input13 -i input14 -i input15 -i input16 -filter_complex "[0:v]scale=iw/4:-1[v0];[1:v]scale=iw/4:-1[v1];[2:v]scale=iw/4:-1[v2];[3:v]scale=iw/4:-1[v3];[4:v]scale=iw/4:-1[v4];[5:v]scale=iw/4:-1[v5];[6:v]scale=iw/4:-1[v6];[7:v]scale=iw/4:-1[v7];[8:v]scale=iw/4:-1[v8];[9:v]scale=iw/4:-1[v9];[10:v]scale=iw/4:-1[v10];[11:v]scale=iw/4:-1[v11];[12:v]scale=iw/4:-1[v12];[13:v]scale=iw/4:-1[v13];[14:v]scale=iw/4:-1[v14];[15:v]scale=iw/4:-1[v15];[v0][v1][v2][v3][v4][v5][v6][v7][v8][v9][v10][v11][v12][v13][v14][v15]xstack=inputs=16:layout=0_0|w0_0|w0+w1_0|w0+w1+w2_0|0_h0|w4_h0|w4+w5_h0|w4+w5+w6_h0|0_h0+h4|w8_h0+h4|w8+w9_h0+h4|w8+w9+w10_h0+h4|0_h0+h4+h8|w12_h0+h4+h8|w12+w13_h0+h4+h8|w12+w13+w14_h0+h4+h8" output.mp4
Resize/scale an input
Since both videos need to have the same with for vstack, and the same height for hstack, you may need to scale one of the other videos to match the other:
Simple scale filter example to set width of input0 to 640 and automatically set height while preserving the aspect ratio:
ffmpeg -i input0 -i input2 -filter_complex "[0:v]scale=640:-1[v0];[v0][1:v]vstack=inputs=2" output
For a more advanced method to fit any size video into a specific size while preserving aspect ratio see Resizing videos with ffmpeg to fit into static sized player.
You can also use the scale2ref filter to automatically resize one video to match the dimensions of the other.
Delaying/pausing videos
This example will play the top left video while pausing the others. Once the top left video ends the top right video will play and so on.
Use the tpad, adelay, xstack, and amix filters:
ffmpeg -i top-left.mp4 -i top-right.mp4 -i bottom-left.mp4 -i bottom-right.mp4 -filter_complex "[1]tpad=start_mode=clone:start_duration=5[tr];[2]tpad=start_mode=clone:start_duration=10[bl];[3]tpad=start_mode=clone:start_duration=15[br];[0][tr][bl][br]xstack=inputs=4:layout=0_0|w0_0|0_h0|w0_h0[v];[1:a]adelay=5s:all=true[a1];[2:a]adelay=10s:all=true[a2];[3:a]adelay=15s:all=true[a3];[0:a][a1][a2][a3]amix=inputs=4[a]" -map "[v]" -map "[a]" output.mp4
This example assumes each input is 5 seconds duration. Adjust start_duration and adelay values as needed.
This command requires FFmpeg 4.3 or newer.
If you don't like the complexity of xstack you can use several hstack/vstack instead as shown in Example 4: 2x2 grid.
See this answer to this question for a newer, simpler way to do this.
Old version:
You should be able to do this using the pad, movie and overlay filters in FFmpeg. The command will look something like this:
ffmpeg -i top.mov -vf 'pad=iw:2*ih [top]; movie=bottom.mov [bottom]; \
[top][bottom] overlay=0:main_h/2' stacked.mov
First the movie that should be on top is padded to twice its height. Then the bottom movie is loaded. Then the bottom movie is overlaid on the padded top movie at an offset of half the padded movie's height.
For 2 videos:
ffmpeg -i 1.mp4 -i 2.mp4 -filter_complex hstack out.mp4
For more videos(3 in this example):
ffmpeg -i 1.mp4 -i 2.mp4 -i 3.mp4 -filter_complex hstack=3 out.mp4

Resources