I'm trying to install rpm on mac os big sur with:
brew install rpm
but i'm getting always the same error:
Error: rpm: no bottle available!
Already tried
brew update
brew upgrade
brew update-reset
and no good.
My brew version is:
❯ brew --version
Homebrew 3.2.9-64-g6da8630
Any ideas what's going on?
Thanks
You're using an ARM Mac and the rpm doesn't support built as native arm64 package. You need to install a Rosetta Homebrew as well.
Check gdb: no bottle available-gdb install for detail explanation.
Related
I'm using qwebengine in my Qt5 program.
I use this command to install qt on my travis-ci env:
HOMEBREW_NO_AUTO_UPDATE=1 brew install qt5 qt5-qtwebengine --verbose; fi
However it tells me: Error: No available formula with the name "qt5-qtwebengine"
How to instaall qtwebengine properly by brew?
The fix was patched in two weeks ago and you will need to brew update before you brew install qt
I am using Homebrew v0.9.5 on my Mac OS X version 10.9.4
When I run the command: `brew install imagemagick, this error occurred.
$ brew install imagemagick
==> Installing dependencies for imagemagick: libpng, freetype
==> Installing imagemagick dependency: libpng
==> Downloading https://downloads.sf.net/project/machomebrew/Bottles/libpng-1.6.12.mavericks.bottle.tar.gz
curl: (7) Failed connect to downloads.sf.net:443; Operation timed out
Error: Failed to download resource "libpng"
Download failed: https://downloads.sf.net/project/machomebrew/Bottles/libpng-1.6.12.mavericks.bottle.tar.gz
Warning: Bottle installation failed: building from source.
==> Downloading https://downloads.sf.net/project/libpng/libpng16/1.6.12/libpng-1.6.12.tar.gz
curl: (7) Failed connect to downloads.sf.net:443; Operation timed out
Error: Failed to download resource "libpng"
Download failed: https://downloads.sf.net/project/libpng/libpng16/1.6.12/libpng-1.6.12.tar.gz
I have added --disable-openmp option, it also doesn't go well.
$ brew install imagemagick --disable-openmp
brew doctor command result has no problem.
$ brew doctor
Your system is ready to brew.
Have you tried a
$ brew update
$ brew install imagemagick --disable-openmp --build-from-source
Apparently that seemed to fix it for me on Mac OS 10.8 (Mountain Lion). Previously I checked out the latest imagemagick brew recipe with "brew versions imagemagick" and "git checkout e68e443", see here and here
I'm not certain whether the source of my problem was the same as the OP's, however (though this has an accepted answer already) I'll post this in case this solution works for others.
Using brew install imagemagick, I would encounter the following error:
curl: (52) Empty reply from server Error: Failed to download resource
"libpng" Download failed:
https://downloads.sf.net/project/libpng/libpng16/1.6.16/libpng-1.6.16.tar.xz
Which is similar, if less specific than the OP's message.
As it turned out, I already had a previous version of libpng installed (version 1.5.7). I then ran:
brew upgrade libpng
Followed by another brew install libpng, and this time it succeeded, as it now had the correct version needed.
This problem also occurs because https://downloads.sf.net/project/libpng/libpng16/1.6.16/libpng-1.6.16.tar.xz has a badly configured SSL certificate. Open the link in your browser and see if your browser complains.
If that's the case, you can manually download the file to /Library/Caches/Homebrew and run again.
Source: https://github.com/Homebrew/homebrew/issues/36703
For me it was upgrading to El Capitan. I found the simplest solution was to force remove homebrew:
sudo ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/uninstall)"
then to re-install it:
sudo /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
then install imageMajick:
brew install ImageMagick
Depending on your setup you may not want to sudo. For me, its fine. Enjoy a snack while you manipulate images.
In my case the url was simply not correct, with which homebrew wanted to download the required file. I looked it up here http://sourceforge.net/projects/libpng/files/libpng16/older-releases/1.6.16/ by myself and copied it to /Library/Caches/Homebrew like #Dan suggested.
I then run brew install libpng again and it worked.
Follow this:
brew install imagemagick#6
Add below lines in to ~/.bash_profile file
export LDFLAGS="-L/usr/local/opt/imagemagick#6/lib" export
CPPFLAGS="-I/usr/local/opt/imagemagick#6/include" export
PKG_CONFIG_PATH="/usr/local/opt/imagemagick#6/lib/pkgconfig"
Install Rmagick
source ~/.bash_profile
gem install rmagick
If you are an Anaconda/Miniconda user on Mac OSX or Linux, you can install packages like imagemagick using conda.
conda install -c conda-forge imagemagick
https://anaconda.org/conda-forge/imagemagick
I have Homebrew installed, I'm trying to install RVM with:
rvm install 1.9.3-head
and I get this error:
Installing required packages:gcc46
Error running 'requirements_osx_brew_libs_install gcc46',
please read /Users/mike/.rvm/log/1384918134_ruby-1.9.3-head/package_install_gcc46.log
Requirements installation failed with status: 1
brew doctor says I'm ready to brew.
In the log I see:
Error: Download failed: ftp://gcc.gnu.org/pub/gcc/infrastructure/gmp-4.3.2.tar.bz2
Ruby 1.9.3+ supports compiling with Clang (which you do have) instead of GCC, so make RVM compile with Clang instead:
rvm install 1.9.3 --with-gcc=clang
When I upgraded to mavericks from mountain lion it somehow started ignoring my dev-tools (like gcc, etc.) try
xcode-select --install
also see here
When upgraded to OSX 10.12 and installing ruby 2.3.1 these steps fixed the issue.
brew install homebrew/versions/gcc46
if there are any linking issues related to any lib please follow the instructions for example
brew link --overwrite libtool
brew link --overwrite libgpg-error
Once the installation of gcc46 is successful you could
rvm install 2.3.1
I have OS X Mavericks installed and I'm trying to run rvm requirements in terminal and it gives me this error.
Installing required packages: autoconf, automake, libtool, pkgconfig, libyaml, libffi, readline, libksba, curl-ca-bundle, gdbm.............
Error running 'requirements_osx_port_libs_install autoconf automake libtool pkgconfig libyaml libffi readline libksba curl-ca-bundle gdbm',
please read /Users/Alex/.rvm/log/ruby-1.9.3-p448/1374263757_package_install_autoconf_automake_libtool_pkgconfig_libyaml_libffi_readline_libksba_curl-ca-bundle_gdbm.log
Requirements installation failed with status: 1.
It looks like RVM tried to install some dependencies using Macports and Macports proceeded to get really confused about dependencies when it tried to install autoconf.
Try running:
brew install autoconf
Otherwise you should run this bash script:
https://gist.github.com/siraj/1399288
Assuming you have brew, which you should if you don't.
If your Macports just isn't working, then you can manually install all of the requirements like this:
brew install autoconf automake libtool pkgconfig libyaml libffi readline libksba curl-ca-bundle gdbm
I tried the above, and a few other things. None worked.
It seems that on OSX 10.9 and XCode5 moved some libs around on us. So I had to install XCode5-DP6 (Dev Preview 6), opened up DP6 and in the settings, you have to tell the command line tools to use the new DP6 build and not the Standard XCode from the marketplace.
First, I had to install homebrew. Nothing liked to play with macports. I am on my first mac as of only a month ago, so macports was just what solved apache for me at the time. I then had to run 'brew install autoconf'
Once I did that I then ran rvm requirements, everything installed without issue. then sudo gem install jekyll from there and it all works like a charm now.
I'm sure once Mavericks is actually released this will get ironed out. We are using early releases after all...
Hope this works for you guys.
[edit] I was troubleshooting problems with my development environment when I noticed one of my problems was the dependency on ImageMagick, since it's a vital part of my app.
After upgrading to OS X Lion (10.7) i no longer had ImageMagick available, i then tried installing again using MacPorts without success, i then installed from source, and the install wasn't very successfully i had convert and identify but it output error messages that i unfortunately dont have anymore, i by some strange reason decided to remove all of my MacPort libraries and started using Homebrew, i tried installing ImageMagick, it installs OK but when i try to use it throws this error
dyld: Library not loaded: /opt/local/lib/libltdl.7.dylib
Referenced from: /usr/local/bin/convert
Reason: Incompatible library version: convert requires version 11.0.0 or later, but libltdl.7.dylib provides version 10.0.0
Trace/BPT trap: 5
I read online but i have no clue on whats going on here, i found that libltdl is called libtool, and that i obviously need to upgrade it to a newer version, but i havent found any indication of how or where to find the source, or if this should be already be handled by homebrew and why it hasn't.
I tried installing ImageMagick again from source using this installer script https://github.com/masterkain/ImageMagick-sl but when i try to use convert it throws a similar error.
$ convert gnome.jpg -resize 50% gnome_.jpg
dyld: Library not loaded: /opt/local/lib/libltdl.7.dylib
Referenced from: /usr/local/bin/convert
Reason: Incompatible library version: convert requires version 11.0.0 or later, but libltdl.7.dylib provides version 10.0.0
Trace/BPT trap: 5
$ which convert
/usr/local/bin/convert
What can i do to solve my problem?
On 10.8 I solved this issue with:
brew install libtool --universal
brew link libtool
If you don't know what brew is, visit https://github.com/mxcl/homebrew and its wiki.
brew uninstall imagemagick
brew install imagemagick --build-from-source
worked for me
I too use homebrew for installing packages but imagemagick stopped working after upgrading OSX 10.8 to 10.9 (Mavericks). I had to do the following steps:
brew uninstall imagemagick
brew uninstall libtool
brew install libtool --universal
brew install imagemagick --build-from-source
Why the --build-from-source? Well for me running brew install imagemagick on its own to install the pre-built binary wasn't sufficient; it fixed the original 'dyln' error but was replaced with:
unable to load module `/usr/local/Cellar/imagemagick/6.8.7-7/lib/ImageMagick//modules-Q16/coders/png.la': file not found # error/module.c/OpenModule/1277
I also upgraded to Lion and lost ImageMagick, although i'm getting different errors.
i found a Lion distribution on imagemagick.org. not a big fan of the DYLD_LIBRARY_PATH environment variable but it works.
ok scratch that. i just downloaded the ImageMagick source and re-compiled:
cd /tmp
curl -OL ftp://ftp.imagemagick.org/pub/ImageMagick/ImageMagick.tar.gz
tar -xzf ImageMagick.tar.gz
cd ImageMagick-6.7.2-7/
./configure --prefix=/usr/local --disable-static --with-modules --without-perl --without-magick-plus-plus --with-quantum-depth=8 --disable-openmp --with-gs-font-dir=/usr/local/share/ghostscript/fonts
make
sudo make install
On Mountain Lion OSX,
Even with the updated brew for imagemagick(which includes libtool), this error seemed to happen to me.
so i fixed it using the following commands
brew uninstall libtool
brew install libtool --universal
brew link libtool --force
For others looking and still having trouble, I used this:
https://github.com/maddox/magick-installer
On 10.8, with brew, I solved this issue with:
brew install graphicsmagick
For the googlers: If you happened to have it installed with brew beforehand, you'll need to reinstall by running brew uninstall graphicsmagick before installing again. Easy.
This helped me after restoring OS X 10.9.3 from time machine.
brew uninstall imagemagick
brew uninstall libtool
brew install libtool --universal
brew unlink libtool && brew link libtool
brew install imagemagick
brew install Homebrew/python/pillow
brew link --overwrite pillow
The same problem might occur with OSX Mountain Lion (preview 4). I had to configure some parts separately because there are some library incompatibilities:
dyld: Library not loaded: /usr/local/lib/libjpeg.8.dylib
Referenced from: /usr/local/bin/convert
Reason: Incompatible library version: convert requires version 13.0.0 or later, but libjpeg.8.dylib provides version 9.0.0
I had to add --with-fontconfig=no, --with-lzma=no and use /opt/local/share/... instead of /usr/local/share/... for the ghostscript fonts:
cd /tmp
curl -OL ftp://ftp.imagemagick.org/pub/ImageMagick/ImageMagick.tar.gz
tar -xzf ImageMagick.tar.gz
cd ImageMagick-6.7.8-0/
./configure --prefix=/usr/local --disable-static --with-modules --without-perl --without-magick-plus-plus --with-quantum-depth=8 --disable-openmp --with-fontconfig=no --with-gs-font-dir=/opt/local/share/ghostscript/fonts --with-lzma=no
make
sudo make install
I could fix the ImageMagick problem by installing corresponding package from cactuslab site.
Then by setting the PATH variables in terminal:
export MAGICK_HOME="/usr/local/ImageMagick/"
export PATH="$MAGICK_HOME/bin:$PATH"
export DYLD_LIBRARY_PATH="$MAGICK_HOME/lib/"
If you're using Homebrew, try the following command:
brew doctor
to diagnose the common problems.
One of it could be to remove DYLD_FALLBACK_LIBRARY_PATH variable from your ~/.profile if you have it.
Or you have to re-install libtool by:
brew reinstall libtool --universal && brew unlink libtool && brew link libtool
I tried most of the solutions above and they didn't work. Here's how I fixed my problem:
brew install imagemagick;
brew install freetype;
cd /usr/X11/lib/;
sudo mv libfreetype.6.dylib libfreetype.6.dylib.orig;
sudo ln -s /usr/local/opt/freetype/lib/libfreetype.6.dylib libfreetype.6.dylib
Tested on OS X 10.7.2
For 10.7.8 and up, you have to install the php version and not the pecl version. Depending on your version of php you've install with Macports you can either do:
sudo port install php-imagick
sudo port install php5-imagick
sudo port install php53-imagick
sudo port install php54-imagick
Remember only to do the one of your current version of php.