I want to print the date after every bash command I run.
This could help me understand how much a command took to execute when I am away from keyboard.
I know I could do
`DATE=`date +%d/%m/%Y\ %H:%M:%S` && echo $DATE`
to get the date but I don't know how or even if it could be possible to run this command after every command I execute on bash.
I would also be interested in running the same command before every command so I could know how long a command took.
Is it possible?
What file should I edit?
For example:
$ wget google.com
15/07/2017 23:40:05
I would be happy, if I could also introduce this following feauture:
$ wget google.com
15/07/2017 23:40:05 15/07/2017 23:40:11
Program run for 00:00:06
where the first date is when I ran the program, second is when program terminated the third is self-explanatonary.
As you understood, I don't want to type every time
$ wget google.com && `DATE=`date +%d/%m/%Y\ %H:%M:%S` && echo $DATE`
To execute a cmd before every command entered, set a trap on DEBUG. Eg.
trap date DEBUG
To execute that command before emitting a prompt, set PROMPT_COMMAND:
PROMPT_COMMAND=date
This does exactly that:
PROMPT_COMMAND+=$'\n'"date +%d/%m/%Y\ %H:%M:%S"
The string in PROMPT_COMMAND gets evaluated after every command. You just need to add the date command to whatever you already had in it. ($'\n' (newline) is a somewhat more robust joiner than ; as two consecutive ; would give you a syntax error)
You can add date/time to your prompt, via PS1 variable. You could use date command, but it's more efficient to use the supported special characters, like \d for date, or \D{strftime-fmt}.
For example:
PS1='\u#\h[\D{%F} \D{%T}]\w\$ '
or, with color:
PS1='\[\033[01;32m\]\u#\h\[\033[00m\][\[\033[02;33m\]\D{%F}\[\033[08m\]T\[\033[00m\]\[\033[02;33m\]\D{%T}\[\033[00m\]]\[\033[01;34m\]\w\[\033[00m\]\$ '
will show:
user#host[2017-07-16 00:01:17]~/somedir$
Note that in the second case (with color) we have a valid ISO8601 timestamp, with a "hidden" date/time separator T in the middle. If you select it with a mouse, T is visible and can be copied. (Also double-click will select the complete timestamp, not only date or time.)
To print timestamp after every command just modify your PS1 prompt and add date to it. The only catch here is that it will tell you time when command ended and new prompt showed. So in case you have your prompt open for long time just hit enter to capture start time before running your command.
PS1="\D{%F %T} \$ "
See this arch wiki page or just google bash prompt customization.
To add time spent executing program just add time before the command
$ time wget google.com
It will give you output like this
real 0m0.177s
user 0m0.156s
sys 0m0.020s
And you can get even more lazy and for commands that you dont't feel like typing time every time you run it, just create alias.
alias wget="time wget"
Because in bash aliases are run before other commands you can do it this way even if it looks like recursion. Then you will call it as you are used to.
And of course, aliases and prompt settings can be put in your .bashrc file, so you don't have to type them every time you open terminal.
Related
I make a script in a command line, but I have a problem. I need change date automatically from a command line. Is it possible?
I know, I can use static date for example:
date 0101122315
but I need an automatic date from the internet in macOs.
You've probably got some research to do, here is one possible outline:
Use curl to have the date from the internet and store in a file or send to standard output - in the latter case you may pipe into more commands or store in a shell variable.
If needed: Use sed, awk, grep, some JSON editor, etc. to extract the date from the result of (1). Not needed if your URL just returns the date and nothing else.
Use date and shell variable or command output substitution to pass your date as an argument.
You can find documentation on all the commands, and the shell, using the man command, e.g. man curl.
You might end up with a short one line script (something like:
date `curl URL | sed command`
) or something longer. Nobody can really tell you as it is unstated in the question what the URL will return.
If you get stuck once you're further along ask a new question showing what you've developed and explains the error and someone will undoubtedly help you progress.
Have fun!
Try this command
sudo sntp -sS time.apple.com
Some times that I have a command ready to press enter but that command I have changed it in some way and it's a long command, then I remember that I have to open a text file (e.g. to get some information that I will use in the command). So what most of the times I do, is to cancel that command (Ctrl+C) and then open the text file get the information I need and then retype the command again with the pasted value from the text file. This is not very efficient for me specially if the server doesn't have any kind of GUI and I can't copy the previous command so I don't lose it.
So my question is, Is there any kind of combination keys that I could use to save a command ready to enter so I don't lose it and I don't have to type it all over again?
Thanks!
This is currently not possible out of the box.
The easiest way to do it is probably to
Change the cancel binding to stash the commandline
Add a binding to recall the stashed commandline
It would work something like this:
The function to recall:
function recall_commandline
if set -q stashed_commandline
commandline -r -- $stashed_commandline
end
end
Add to __fish_cancel_commandline (use funced __fish_cancel_commandline. Once you are happy do funcsave __fish_cancel_commandline):
set -g stashed_commandline $cmd
# right before:
commandline ""
Add to fish_user_key_bindings
bind \cr recall_commandline
This will allow you to press Ctrl+r to recall the last cancelled commandline. Expanding it to multiple is non-trivial (since "commandlines" can have multiple lines), as is adding the commandlines to history so that they can be recalled with the normal bindings.
I have the following function to turn comment/uncomment the current statement:
function toggle-comment-cmd-buffer --description 'Comment/Uncomment the current or every line'
set -l cmdlines (commandline -b)
if test "$cmdlines" = ""
return
end
set -l cmdlines (printf '%s\n' '#'$cmdlines | string replace -r '^##' '')
commandline -r $cmdlines
string match -q '#*' $cmdlines[1]; and commandline -f execute
end
I bind it thusly: bind \e\# toggle-comment-cmd-buffer. This way I can quickly comment and put the current statement in my command history in order to do something else. Then I can recall the comment and press [alt-#] again to remove the comment characters and continue modifying the command.
I set this up in my personal fish config because I had gotten used to doing something similar in ksh93.
I've just started using Terminal (the CLI for Mac OS X).
When I run a command, get some information back, run another command, get more info etc., it is hard (on the eyes) to find a certain point on the screen (e.g. the output for the command before last).
Is there a way of adding a vertical empty space to the end of each output/ after each command is run that has no output?
Each new command that you enter is preceded by a "prompt", and these can be customized (though the exact way to customize depends on the shell). Since you mention Mac OS X I'm assuming you are using the default bash shell, in which case the absolute simplest way to add a blank line is like this: PROMPT_COMMAND=echo. You can run that command to try it out, or add it to a startup file (like .profile in your home folder) to have it done automatically each time.
If you use Bash 4.4 and you want a blank line after your prompt, you could set the PS0 prompt to a newline:
PS0="\n"
Now, this will be inserted every time you run a command:
$ echo "Hello"
Hello
Wondering this too, I've looked at the menu options in Terminal & most of the control characters one can type in and nothing does this on a keystroke. You can however enter an echo command, it alone to leave a single blank line below it before the next prompt. echo \n will add an extra blank line to that, echo \n\n to do 2 extra, ie. 3 blank lines, etc. (you can also do echo;echo;echo getting the same effect)
You can create a shell alias like alias b='echo;echo' (i couldn't seem to get the \n notation to work in a alias), then entering b on a prompt will leave a double-blank line, not bad. Then you gotta figure out how to save aliases in your .profile script.
I tried making an alias for the command ' ' ie. space character, which I though you could type like \ (hmm, stack overflow not formatting this well, that's backslash followed by a space, then return to execute it), but the bash shell doesn't seem to allow an alias with that name. It probably wouldn't allow a function named that either (similar to alias), though I didn't check.
I often use the fish shell, and I found that it does allow a function with that name! Created with function ' '; echo \n; end and indeed it works; at the shell prompt, typing the command \ (again backslash space) leaves a double blank line.
Cool, but.. I tried saving this function using funcsave ' ' (how you save functions in fish, no messing with startup scripts!) and afterwards the function no longer works :^( This is probably a bug in the fish shell. It's in active development right now though, I think I'll report this as a bug since I would kind of like this to work myself.
One could also send Apple a feature request through their bug reporter for an Insert Blank Line menu/keyboard command in Terminal. If someone pays attention to your request it might be implemented in a year maybe.
I wanted to solve exactly the same, and for anyone interested in doing the same, I used what tripleee said in his comment here - I created a .bash_profile (see details here) with the line export PS1="\n\n$ ".
Hopefully that helps someone else too!
How can one loop a command/program in a Unix shell without writing the loop into a script or other application.
For example, I wrote a script that outputs a light sensor value but I'm still testing it right now so I want it run it in a loop by running the executable repeatedly.
Maybe I'd also like to just run "ls" or "df" in a loop. I know I can do this easily in a few lines of bash code, but being able to type a command in the terminal for any given set of command would be just as useful to me.
You can write the exact same loop you would write in a shell script by writing it in one line putting semicolons instead of returns, like in
for NAME [in LIST ]; do COMMANDS; done
At that point you could write a shell script called, for example, repeat that, given a command, runs it N times, by simpling changing COMMANDS with $1 .
I recommend the use of "watch", it just do exactly what you want, and it cleans the terminal before each execution of the commands, so it's easy to monitor changes.
You probably have it already, just try watch ls or watch ./my_script.sh. You can even control how much time to wait between each execution, in seconds, with the -n option, and you can use -d to highlight the difference in the output of consecutive runs.
Try:
Run ls each second:
watch -n 1 ls
Run my_script.sh each 3 seconds, and highlight differences:
watch -n 3 -d ./my_script.sh
watch program man page:
http://linux.die.net/man/1/watch
This doesn't exactly answer your question, but I felt it was relavent. One of the great things with shell looping is that some commands return lists of items. Of course that is obvious, but a something you can do using the for loop is execute a command on that list of items.
for $file in `find . -name *.wma`; do cp $file ./new/location/ done;
You can get creative and do some very powerful stuff.
Aside from accepting arguments, anything you can do in a script can be done on the command line. Earlier I typed this directly in to bash to watch a directory fill up as I transferred files:
while sleep 5s
do
ls photos
end
I recently discovered 'comint-show-output' in emacs shell mode, which jumps to the first line of shell output, which I find incredibly handy when looking at shell output that exceeds a screen length. The advantages of this command over scrolling with 'page up' are A) you don't have to scan with your eyes for the first line of the output B) you only have to hit the key combo once (instead of 'page up' a number of times which probably is not known beforehand).
I thought about ending all my commands with '| more' but actually this is not what I want since most of the time, I want to retain all output in the terminal buffer, and I usually want to see the end of the shell output first.
I use OSX. Is there a terminal app (on os x) and shell (on remote linux) combination equivalent (so I can do something similar without using emacs all the time - I know, crazy talk)? I normally use bash, but would be fine with switching shells just for this feature.
The way I do this sort of thing is by sending my output to a file and then watching the file as it is written. You still get the results of the command dumped to terminal history in real time and can still inspect the output's actual contents further after the fact (or in another terminal, etc...)
command > output &
tail -f output
head output
You could always do something in bash like this:
alias foo='!! | more'
which would make foo run the previous command with more. I'm not sure of any way to do exactly what you are suggesting.
If you're expecting a lot of output and don't want to run your command twice, you can use tee(1) to fork the output:
my-command | tee /tmp/my-command.log | less
This will pipe the output to a paginator (less), while simultaneously logging the output to a file (in this case, a file named /tmp/my-command.log). If you need to review the output after you've quit from less, you can just cat the log file instead of re-running the command.