I'm putting together a TCPServer in Ruby 3.0.2 and I'm finding that I can't seem to read the entire packet without blocking (until the socket is closed).
Edit: There was some confusion on what I was trying to do - my bad - so just to help clarify: I wanted to read everything that had been sent over the TCP connection so far. (end edit)
My first try was:
#!/snap/bin/ruby
require 'socket'
server = TCPServer.new('localhost', 4200)
loop {
Thread.start(server.accept) do |connection|
puts connection.gets # The important line
end
}
But that hangs until the client closes the connection. Okay, so I take a look at connection.methods, and the ruby docs and try a bunch of options that seem promising. Basically, there is two types of read methods: blocking and nonblocking.
The blocking methods that I tried are .read, .gets, .readlines, .readline, .recv, and .recvmsg. Now .read, .readlines, and .gets all hang (until the socket is closed) - so that's not helpful. The other ones (eg. .readline, the recv methods) don't read the entire message. Now, I could read each line until I see an empty line and parse the HTTP header from there. But there's got to be a better way; I don't want to have to worry about getting a corrupted message and hanging because I didn't read an empty line at the end of the header.
So I went looking at the non-blocking options. Specifically .recv_nonblock and .recvmsg_nonblock. Both of these throw errors (Resource temporarily unavailable - recvfrom(2) would block and Resource temporarily unavailable - recvmsg(2) respectively).
Any ideas on what could be going on? I think it has something to with me using Ruby 3, because trying out the code on Ruby 2.5, client.gets returns a line (doesn't hang), although .readlines does hang - so not sure what's going on.
Ideally, I could just call something along the lines of client.get_message and I would get the entire message that has been sent, but I'd also be okay with working at the TCP level and getting the packet size, reading that size, and reconstructing the message from there.
TCP just transmits the bytes that you write to the socket, and guarantees that the are received in the order they were sent. If you have the concept of a 'message' then you'll need to add that into your server and client.
.gets specifically will block until it reads a new 'line', or whatever you define as the separator for the string - see the docs IO#gets. This means that until your server receives that byte from the client, it will block.
In your client have a look at how you're writing your data - if you're using ruby then puts would work, as it will terminate the string with a new line. If you're using write then it will only write the string without a new line
Ie.
# client.rb
c = TCPSocket.new 'localhost', 5000
c.puts "foo"
c.write "bar"
c.write "baz\n"
# server.rb
s = TCPServer.new 5000
loop do
client = s.accept
puts client.gets
puts client.gets
end
will output
foo
barbaz
Thanks to everyone who commented/answered, but I found the solution that I think was intended by the creators of the Socket class!
The recv_nonblock method takes some optional arguments - one of which is a buffer that the Socket will store what it has read to. So a call like client.recv_nonblock(1000, 0, buffer) stores up to 1000 characters from the Socket into buffer and then exits instead of blocking.
Just to make life easy, I put together a monkey patch to the TCPSocket class:
class TCPSocket
def eat_buffer
contents = ''
buffer = ''
begin
loop {
recv_nonblock(256, 0, buffer)
contents += buffer
}
rescue IO::EAGAINWaitReadable
contents
end
end
end
The point that Steffen makes in the comments is well taken - TCP isn't designed to be used this way. This is a hacky (in the bad sense) method, and should be avoided.
Related
I am working on an assignment where I have to develop a web server in Ruby using the socket library. I was able to get a simple web server up and running as seen in this thread here .
I am currently working on getting and storing the body of an HTTP request into a variable in my web server. The problem I am running into is trying to define a while loop that gets the entire body of a HTTP request.
I am attempting to get the body of a HTTP request by using the gets method. I could not find any documentation on this method (I saw it being used here)
and was wondering if there were more documentation online.
In my first post here, someone suggested that I use the Content-Length header to determine the size of the body and how much data to read from the socket. I don't really understand how I would go about implementing this because I am unsure how the gets method functions.
Since this is for an assignment, I don't think posting code would be a good idea. I am looking for more information on the gets method and any tips to point me towards the right direction.
You shouldn't be using gets. gets tries to read complete lines (ie it reads up to a line separator), but there is no guarantee that an http request body ends with a line separator.
Instead you should be using read - this allows you to read an arbitrary amount of data (as you mentioned you can use the content length header to know how much to read)
Your ultimate problem isn't related to gets, or even really anything in your code. But before we get to that, let's answer this question & explore sockets a little bit.
If you follow the chain up, you find that Ruby's TCPSocket class inherits from its IO class. It's IO that provides gets. gets will read, line-by-line, until there's nothing more to read. Let's create a simple client that connects to a port, spits out 4 lines of poetry, and then quits:
# poetry_sender.rb
require 'socket'
poem = ["'God save thee, ancient Mariner!",
"From the fiends, that plague thee thus!—",
"Why look'st thou so?'—With my cross-bow",
"I shot the ALBATROSS."]
puts "Client establishing connection..."
s = TCPSocket.new 'localhost', 2000
puts "Client sending poetry..."
poem.each { |line| s.puts line } # Print each line out on the socket
s.close # Close our socket
puts "All done."
And a simple server, that displays what the client sends us:
# poetry_receiver.rb
require 'socket'
server = TCPServer.new 2000 # Server bind to port 2000
loop do
puts "Server now awaiting some poetry..."
socket = server.accept # Wait for a client to connect
while line = socket.gets
puts "A client sent us this beautiful line: #{line}"
end
puts "They had nothing more to say; let's disconnect them."
socket.close
end
If you run the server (poetry_receiver.rb) first, and then the client, you'll see some output like this:
Server now awaiting a connection...
A client sent us this beautiful line: 'God save thee, ancient Mariner!
A client sent us this beautiful line: From the fiends, that plague thee thus!—
A client sent us this beautiful line: Why look'st thou so?'—With my cross-bow
A client sent us this beautiful line: I shot the ALBATROSS.
They had nothing more to say; let's disconnect them.
Server now awaiting a connection...
The last two lines are the important ones; they indicate that socket.gets returned nil and we exited the while loop.
So, how can we modify our poetry_sender.rb so the server doesn't detect the end of the poem? You might think it's got something to do with blank lines, but if you set poem = [] or poem = ["", "", ""] then you'll find that it still gets disconnected OK. But what if we added a delay before closing the socket in poetry_sender.rb?
sleep 60
s.close # Close our socket
puts "All done."
Now you'll see a big delay in the server output. The TCP server doesn't break out of its while loop until the TCP client closes its socket.
Now we can turn to your broader problem: you're trying to implement a simple HTTP server, but your server is getting hung up in a while loop when you try to connect via your web browser. It's because your web browser is keeping that socket open; but it has to, otherwise it has no way to send you back a response. So, how do we know when a client has finished sending us a response? The HTTP 1.1 spec says:
A client sends an HTTP request to a server in the form of a request message... followed by header fields... an empty line to indicate the end of the header section, and finally a message body containing the payload body (if any).
Let's not worry about the message body; how could we write a while loop that terminates if it has no more impact, or if it receives a blank line? Here's one way, in a simple HTTP server that just sends back "Hello world" no matter what request it receives:
require 'socket'
server = TCPServer.new('localhost', 2345)
http_request = [] # We'll store the lines of our incoming request here.
loop do
socket = server.accept
while (line = socket.gets) && line.chomp != '' # While the client is connected, and hasn't sent us a blank line yet...
http_request << line
end
# Send response headers
socket.print "HTTP/1.1 200 OK\r\n" +
"Content-Type: text/plain\r\n" +
"Connection: close\r\n" +
"\r\n"
# Send response body
socket.print "Hello world!"
socket.close
end
Quite late to the party, but I'm currently implementing my own rack app server (for fun).
Here you can see how I do it: https://github.com/tak1n/reifier/blob/master/lib/reifier/request.rb
The first line of a HTTP request is always the request line, which is basically something like GET /test HTTP/1.1
After the request line until \r\n you get the headers.
After that you are able to read the body (if PUT / POST request) with just using the CONTENT_LENGTH you parsed from the headers.
So, I'm trying to simulate some basic HTTP persistent connections using sockets and Ruby - for a college class.
The point is to build a server - able to handle multiple clients - that receives a file path and gives back the file content - just like an HTTP GET.
The current server implementation loops listening for clients, fires a new thread when there's an incoming connection and reads the file paths from this socket. It's very dumb, but it works fine when working with non-presistent connections - one request per connection.
But they should be persistent.
Which means the client shouldn't worry about closing the connection. In the non-persistent version the servers echoes the response and close the connection - goodbye client, farewell.
But being persistent means the server thread should loop and wait for more incoming requests until... well until there's no more requests. How does the server knows that? It doesn't! Some sort of timeout is needed. I tried to do that with Ruby's Timeout, but it didn't work.
Googling for some solutions - besides being thoroughly advised to avoid using Timeout module - I've seen a lot of posts about the IO.select method, that should handle this socket waiting issue way better than using threads and stuff (which really sounds cool, considering how Ruby threads (don't) work). I'm trying to understand here how IO.select works, but still wasn't able to make it work in the current scenario.
So I aske basically two things:
how can I efficiently work this timeout issue on the server-side, either using some thread based solution, low-level socket options or some IO.select magic?
how can the client side know that the server has closed its side of the connection?
Here's the current code for the server:
require 'date'
module Sockettp
class Server
def initialize(dir, port = Sockettp::DEFAULT_PORT)
#dir = dir
#port = port
end
def start
puts "Starting Sockettp server..."
puts "Serving #{#dir.yellow} on port #{#port.to_s.green}"
Socket.tcp_server_loop(#port) do |socket, client_addrinfo|
handle socket, client_addrinfo
end
end
private
def handle(socket, addrinfo)
Thread.new(socket) do |client|
log "New client connected"
begin
loop do
if client.eof?
puts "#{'-' * 100} end connection"
break
end
input = client.gets.chomp
body = content_for(input)
response = {}
if body
response.merge!({
status: 200,
body: body
})
else
response.merge!({
status: 404,
body: Sockettp::STATUSES[404]
})
end
log "#{addrinfo.ip_address} #{input} -- #{response[:status]} #{Sockettp::STATUSES[response[:status]]}".send(response[:status] == 200 ? :green : :red)
client.puts(response.to_json)
end
ensure
socket.close
end
end
end
def content_for(path)
path = File.join(#dir, path)
return File.read(path) if File.file?(path)
return Dir["#{path}/*"] if File.directory?(path)
end
def log(msg)
puts "#{Thread.current} -- #{DateTime.now.to_s} -- #{msg}"
end
end
end
Update
I was able to simulate the timeout behaviour using the IO.select method, but the implementation doesn't feel good when combining with a couple of threads for accepting new connections and another couple for handling requests. The concurrency makes the situation mad and unstable, and I'm probably not sticking with it unless I can figure out a better way of using this solution.
Update 2
Seems like Timeout is still the best way to handle this. I'm sticking with it till find a better option.
I still don't know how to deal with zombie client connections.
Solution
I endend up using IO.select (got inspired when looking at the webrick code). You cha check the final version here (lib/http/server/client_handler.rb)
You should implement something like heartbeat packets.Client side should send special packets to after few secs/mins to ensure that server doesn't time out the connection on the client end.You just avoid doing anything in this call.
I have some code that I'm using to get data from a network socket. It works fine, but I flailed my way into it through trial and error. I humbly admit that I don't fully understand how it works, but I would really like to. (This was cargo culted form working code I found)
The part I don't understand starts with "ready = IO.select ..." I'm unclear on:
What IO.select is doing (I tried looking it up but got even more confused with Kernel and what-not)
what the array argument to IO.select is for
what ready[0] is doing
the general idea of reading 1024 bytes? at a time
Here's the code:
#mysocket = TCPSocket.new('192.168.1.1', 9761)
th = Thread.new do
while true
ready = IO.select([#mysocket])
readable = ready[0]
readable.each do |socket|
if socket == #mysocket
buf = #mysocket.recv_nonblock(1024)
if buf.length == 0
puts "The server connection is dead. Exiting."
exit
else
puts "Received a message"
end
end
end
end
end
Thanks in advance for helping me "learn to fish". I hate having bits of my code that I don't fully understand - it's just working by coincidence.
1) IO.select takes a set of sockets and waits until it's possible to read or write with them (or if error happens). It returns sockets event happened with.
2) array contains sockets that are checked for events. In your case you specify only sockets for reading.
3) IO.select returns an array of arrays of sockets. Element 0 contains sockets you can read from, element 1 - sockets you can write to and element 2 - sockets with errors.
After getting list of sockets you can read the data.
4) yes, recv_nonblock argument is size in byte. Note that size of data actually being read may be less than 1024, in this case you may need to repeat select (if actual data matters for you).
Is there a way to find out how many bytes of data is available on an TCPSocket in Ruby? I.e. how many bytes can be ready without blocking?
The standard library io/wait might be useful here. Requiring it gives stream-based I/O (sockets and pipes) some new methods, among which is ready?. According to the documentation, ready? returns non-nil if there are bytes available without blocking. It just so happens that the non-nil value it returns it the number of bytes that are available in MRI.
Here's an example which creates a dumb little socket server, and then connects to it with a client. The server just sends "foo" and then closes the connection. The client waits a little bit to give the server time to send, and then prints how many bytes are available for reading. The interesting stuff for you is in the client:
require 'socket'
require 'io/wait'
# Server
server_socket = TCPServer.new('localhost', 0)
port = server_socket.addr[1]
Thread.new do
session = server_socket.accept
sleep 0.5
session.puts "foo"
session.close
end
# Client
client_socket = TCPSocket.new('localhost', port)
puts client_socket.ready? # => nil
sleep 1
puts client_socket.ready? # => 4
Don't use that server code in anything real. It's deliberately short in order to keep the example simple.
Note: According to the Pickaxe book, io/wait is only available if "FIONREAD feature in ioctl(2)", which it is in Linux. I don't know about Windows & others.
I've this ruby code that connects to a TCP server (namely, netcat). It loops 20 times, and sends "ABCD ". If I kill netcat, it takes TWO iterations of the loop for an exception to be triggered. On the first loop after netcat is killed, no exception is triggered, and "send" reports that 5 bytes have been correctly written... Which in the end is not true, since of course the server never received them.
Is there a way to work around this issue ? Right now I'm losing data : since I think it's been correctly transfered, I'm not replaying it.
#!/usr/bin/env ruby
require 'rubygems'
require 'socket'
sock = TCPSocket.new('192.168.0.10', 5443)
sock.sync = true
20.times do
sleep 2
begin
count = sock.write("ABCD ")
puts "Wrote #{count} bytes"
rescue Exception => myException
puts "Exception rescued : #{myException}"
end
end
When you're sending data your blocking call will return when the data is written to the TCP output buffer. It would only block if the buffer was full, waiting for the server to acknowledge receipt of previous data that was sent.
Once this data is in the buffer, the network drivers try to send the data. If the connection is lost, on the second attempt to write, your application discovers the broken state of the connection.
Also, how does the connection close? Is the server actively closing the connection? In which case client socket would be notified at its next socket call. Or has it crashed? Or perhaps there's a network fault which means you can no longer communicate.
Discovering a broken connection only occurs when you try to send or receive data over the socket. This is different from having the connection actively closed. You simply can't determine if the connection is still alive without doing something with it.
So try doing sock.recv(0) after the write - if the socket has failed this would raise "Errno::ECONNRESET: Connection reset by peer - recvfrom(2)". You could also try sock.sendmsg "", 0 (not sock.write, or sock.send), and this would report a "Errno::EPIPE: Broken pipe - sendmsg(2)".
Even if you got your hands on the TCP packets and get acknowledgement that the data had been received at the other end, there's still no guarantee that the server will have processed this data - it might in its input buffer but not yet processed.
All of this might help identify a broken connection earlier, but it still won't guarantee that the data was received and processed by the server. The only sure way to know that the application has processed your message is with an application level response.
I tried without the sleep function (just to make sure it wasn't putting on hold anything) and still no luck:
#!/usr/bin/env ruby
require 'rubygems'
require 'socket'
require 'activesupport' # Fixnum.seconds
sock = TCPSocket.new('127.0.0.1', 5443)
sock.sync = true
will_restart_at = Time.now + 2.seconds
should_continue = true
while should_continue
if will_restart_at <= Time.now
will_restart_at = Time.now + 2.seconds
begin
count = sock.write("ABCD ")
puts "Wrote #{count} bytes"
rescue Exception => myException
puts "Exception rescued : #{myException}"
should_continue = false
end
end
end
I analyzed with Wireshark and the two solutions are exactly behaving identically.
I think (and can't be sure) that until you actually call your_socket.write (which will not fail as the socket is still opened because you weren't probing for its possible destruction), the socket won't raise any error.
I tried to simulate this with nginx and manual TCP sockets. And look at that:
irb> sock = TCPSocket.new('127.0.0.1', 80)
=> #<TCPSocket:0xb743b824>
irb> sock.write("salut")
=> 5
irb> sock.read
=> "<html>\r\n<head><title>400 Bad Request</title></head>\r\n<body>\r\n</body>\r\n</html>\r\n"
# Here, I kill nginx
irb> sock.write("salut")
=> 5
irb> sock.read
=> ""
irb> sock.write("salut")
Errno::EPIPE: Broken pipe
So what's the conclusion from here? Unless you're actually expecting some data from the server, you're screwed to detect that you've lost the connection :)
To detect a gracefully close, you'll have to read from the socket - read returning 0 indicates the socket has closed.
If you do need know if data got sent successfully though, there's no way other than implementing ACKs of the data at the application level.