I'm using rbenv, ruby 2.6.5, and attempting to use bundler 2.0.2. Currently when I run gem list, bundler 2.0.2 is the only version shown on the screen. However, when I run bundle install in my project, an error is thrown stating that my current bundler version is 2.1.2. If I run bundler version in the shell, it indeed says 2.1.2. Where can I find this version and eliminate it?
Thanks,
Ed
Uninstall all versions of bundler with gem uninstall bundler and install the version you need again.
I currently have 2 ruby versions, 2.5.5 and 2.3.8, I am managing them with rbenv, and for gems, I use bundler to manage my specific gem versions. I have an issue when I want to switch to a project that uses 2.3.8 or a version that has to do with Ruby version 2.3.
My question is how do I get bundler to run the command to bundle install interact with my 2.3 projects.
My current version of bundler is 2.0.2.
I have already tried installing a lower version of bundler of which the bundler website claims to interact with ruby version 2.3.
I thought that if I specified the command to run bundle _version_ install it would work, but it still gave me the response that it needed ruby version 2.5 for bundler to work.
Lots of help appreciated.
In some situations, isolation can help. I would like to recommend rvm (https://github.com/rvm/rvm) for managing ruby versions. This tool is very similar to rbenv but in comparison, it allows you to create gemsets which are kind of containers of gems for special purposes. For instance:
rvm install 2.5.5 --disable-binary
rvm use 2.5.5#name-of-gemset --create
gem install bundler
bundle install # inside your project folder with Gemfile
I think that you will not have problems with versions again.
I have a website using Jekyll with Github Pages. After previously messing about with versions and RVM on another computer, on this one I opted to stick with just one version of Ruby and per-project environments using bundler.
I have a pretty simple Gemfile:
[$]> cat Gemfile
source 'https://rubygems.org'
gem 'github-pages'
and bundler config:
[$]> cat .bundle/config
---
BUNDLE_PATH: env
BUNDLE_DISABLE_SHARED_GEMS: '1'
When I run any command (jekyll, gem, irb) through bundle exec, I get a dependency error:
[$]> bundle exec jekyll
Could not find RedCloth-4.2.9 in any of the sources
Run `bundle install` to install missing gems.
However, the bundle is already installed:
[$]> bundle install
Using RedCloth 4.2.9
Using i18n 0.6.11
Using json 1.8.1
[snip]
Using github-pages 29
Using bundler 1.7.7
Your bundle is complete!
It was installed into ./env
I'm at a bit of a loss as to how bundler can think the gems are installed when using one subcommand, but think they're missing when using another.
[$]> which ruby
/usr/local/bin/ruby
[$]> which bundler
/usr/local/bin/bundler
[$]> ruby --version
ruby 2.2.0p0 (2014-12-25 revision 49005) [x86_64-darwin14]
[$]> bundler --version
Bundler version 1.7.7
After deleting the env directory and reinstalling, I noticed it created subdirectories for two Ruby versions - 2.1.0 and 2.2.0. The latter was my current version of Ruby, but the directory was empty (all the gems were installed into the env/ruby/2.1.0/gems directory). This, combined with Oliver's answer about rbenv, got me thinking about mismatched versions.
I reinstalled bundler with a simple gem install bundler, reran bundle install, and all is good.
It seems in general the answer is to sort out issues with bundler installing for a different version of Ruby than you're actually using. It seems strange to me it would use one thing for bundle install and another for bundle exec, but *shrug* whatever.
I had exactly the same problem after installing rbenv as my Ruby manager. In the end I solved the problem with:
rbenv rehash
(additionally you may need to restart terminal, as per #joel-glovier's comment)
That fact it's complaining about Redcloth 4.2.9 is actually a red herring. Bundler probably can't find any of the gems but Redcloth is the first one it looks for and so it exits imediately with that error.
Basically I'd installed rbenv and ruby 2.2.2 and changed to that version with rbenv global 2.2.2 but I'd forgotten to run rbenv rehash. So I'm guessing when running bundle install it was looking at my previously used version of ruby (system ruby) to see what gems were installed but when running bundle exec jekyll serve it was looking at my new ruby version and not finding any of the gems.
I had to open ./.bundle/config and set
BUNDLE_DISABLE_SHARED_GEMS to true for bundle the gems to be properly locally stored.
I had defined BUNDLE_GEMFILE = /home/app/current/Gemfile in .bashrc file. That broke the bundle exec while deploying a new version to the server. Check with env that you don't have the BUNDLE_GEMFILE defined in your environment variables.
I added the BUNDLE_GEMFILE into the .bashrc file to ease with monit commands. Now I just define the variable in the beginning of the monit command.
When I try to bundle install I get the following message:
Your Ruby version is 2.0.0, but your Gemfile specified 2.1.0
In my Gemfile I have the following:
ruby '2.1.0'
And when I run ruby -v in the console I get:
ruby 2.1.0p0 (2013-12-25 revision 44422) [x86_64-darwin12.0]
What does Ruby 2.1.0p0 mean? What version should I have in my Gemfile and why does the error tell me I have Ruby version 2.0.0?
Run
gem install bundler
or
gem update bundler
which may fix your problem.
For all new installed versions of Ruby you should update or install a new bundler.
In the top-level directory of your project, create a file named .ruby-version containing (wait for it...)
2.1.0
That apparently is the cross-{rbenv,rvm} way of spec'ing the version now.
For me, none of the answers helped. I fixed it closing and opening again the terminal.
If you get this in a Rails project, and you recently upgraded your Ruby version you might have spring still running with the old version of Ruby.
./bin/spring stop
will fix this.
None of the other suggestions was working for me. On the server, I had to do:
rvm --default use [correct version number]
brew cleanup ruby worked for me as I use HomeBrew to install Ruby.
I recently updated Ruby through HomeBrew but HomeBrew did not remove the older version. brew cleanup ruby will delete the older version of Ruby.
the main reason for this problem is your machine and gemfile using a different ruby version
so there is multiple problems and solutions for this issue you can try the below solutions one by one
1- make sure your machine install and use the same version of your gemfile if your machine not using the same one try to install this version using rvm
$ rvm install ruby_version_you_want
make sure the version installed success by using this command
$ rvm list
and if the new version doesn't set as a default you can set it using this command
$ rvm --default use ruby_version_you_want
you can check the current ruby version
$ rvm current
$ ruby -v
2- if you have the same issue check your bundler
$ gem install bundler
or
$ gem update bundler
3- in some cases spring still using the old version so you need to stop it
$ ./bin/spring stop
4- another case you can type
$ gem pristine --all
and try to install bundle again
5- also in some cases after install the updated ruby version you just need to restart your terminal.
6- another solution but I didn't recommend it the top-level directory of your project, create a file named .ruby-version containing your active running ruby version
7- if you still have this problem try to remove ruby and install the updated version only
$ aptitude purge ruby
If you are using Capistrano you should also check your deploy.rb file for the set :rbenv_ruby configuration.
I got this after upgrading with ruby-install. Fixed this with:
gem install bundler
followed by:
$HOME/.rubies/ruby-2.4.1/bin/bundle
It shouldn't be necessary to specify the path as which bundle indicates it's already using this path. But it gives the version error if running bundle without the path. I don't know why?
Thanks for the info about installing / updating bundler but it didn't work for me.
I had to do rbenv rehash
If you are using rbenv to manage your ruby environments you can run rbenv local 2.1.0 within your project directory to set the version of ruby your gemfile asks for.
NONE of the above answers worked for me, but
$ gem pristine --all
did the trick for me
buona fortuna
I struggled with something very similar, just different versions. I finally fixed it by going to RubyGems and placing the latest version of bundler in my gemfile, which currently is:
gem 'bundler', '~> 2.1', '>= 2.1.4'
There was still an issue, but after that, I ran:
gem update --system
And it resolved the mixed-up versions of Ruby in the rails project folder. You may have to restart the terminal before you do this. Also, I commented out the bundler gem file, it appears the gem update --system command is what really resolved it.
I got it from here:
For more advanced projects .versions.conf is supported, where more than the Ruby version can be specified.
Generating .versions.conf:
rvm --create --versions-conf use 1.9.3#my_app
Example .versions.conf:
ruby=jruby-1.6.8
ruby-gemset=my_app
env-JRUBY_OPTS=--1.9
Make sure your server configuration points to the correct ruby installation.
I had already updated my Ruby version in the .ruby-version file and that didn't fix it. ruby -v also showed the correct version, but I had forgotten to update my server config.
For example, with rbenv, NGINX, and Pushion Passenger I had in my NGINX server block:
passenger_ruby /Users/myusername/.rbenv/versions/2.3.1/bin/ruby;
And I needed to change to...
passenger_ruby /Users/myusername/.rbenv/versions/2.3.3/bin/ruby;
Then restarted NGINX and it worked.
This could happen when you install new version of ruby and update .ruby-version and Gemfile to the new version without doing install all the gems for new version of ruby first. So do the
$ bundle install
and you might as well need to source .profile or restart your shell.
If you are using rbenv just run
rbenv local 2.0.0
Then
bundle install
I opened Gemfile and replaced 2.7.1 with my own version of ruby 2.7.0 Everything is okay right now.
Had the same problem and I'm working with rbenv
Those are the steps that helped me fix my problem:
First in terminal, type which bundle. For me this gave: /usr/local/bin/bundle
Again in terminal try which ruby. In my case this gave: /Users/Mahmoud/.rbenv/shims/ruby
The problem here thus is that bundle isn't using the same ruby version from rbenv. So the path needs fixing. In other words I need to tell my terminal to use the rbenv version of bundle when I use bundle install.
So step 3: For me I personally already had the path set in ~/.bash_profile:
export PATH="$HOME/.rbenv/shims:$PATH"
eval "$(rbenv init -)"
but apparently this was not enough as I was using zsh. Had to add those same 2 lines to ~/.zshrc as well.
Restart terminal
Now bundle install is working as expected and which bundle gives:
/Users/Mahmoud/.rbenv/shims/bundle
indicating that the problem was just that bundle was using the wrong ruby.
So if you have this problem, just make sure ~/.bash_profile and ~/.zshrc have the correct path by adding the 2 lines indicated above. If this didnt work take a deep dive into paths to make sure that before starting which bundle gives the equivalent of:
/Users/Mahmoud/.rbenv/shims/bundle
Had the same error. Doing the following fixed it. I was using ruby 2.5.5 and rbenv. Upgraded from 2.5.1.
rbenv rehash
gem uninstall bundler
gem install bundler
gem install bundler:1.17.3 (my app needed specific bundler -v 1.17.3)
gem install rails
I solved this problem by updating my ruby version to ruby '2.4.0'
Then bundle install
Simply closing the terminal I was working on and opening a new one worked for me. Sometimes, updates are not effected immediately until a session is closed. I have found this as the case with many rails errors I faced.
I clean and install with that:
sudo gem pristine --all
and install again:
bundle install
I face the error msg
Your Ruby version is 2.5.1, but your Gemfile specified 2.3.0
and solved by the following steps:
open Gemfile which located at your directory.
change ruby '2.3.0' to ruby '2.5.1' and save the Gemfile
go back to items and run bundle update.
the issue is perfectly solved.
When my Gemfile is using :mri_20, and previous versions of bundler do not support that, is it a good idea to add
gem 'bundler', '~>1.3.5'
to the Gemfile? Is there a better way to enforce a minimum bundler version?
This won't have any affect on the bundler used to manage the gems in the Gemfile. The version of bundler that's used is the one that's available in your current ruby environment.
The best way to manage this is with gemsets - you can create a gemset with a known, working version of bundler and always switch to that gemset when working with that project.
To check the bundler version, run:
$ bundle --version
Bundler version 1.3.5
If you want to enforce the bundler version when running bundle install, put this at the top of the Gemfile:
# Gemfile
if Gem::Version.new(Bundler::VERSION) < Gem::Version.new('1.3.5')
abort "Bundler version >= 1.3.5 is required"
end