I'm using Ubuntu 20.04 and trying to build OpenModelica from source, first ran autoconf then configure, it descends into the OMCompiler directory then stops, never returns yes or no for that make check.
Can I disable or hard code something in the configure file (or an autoconf file that generated the configure file) to debug this, or skip over it?
Related
A few months ago I installed an application from source by executing
./configure --whatever
make
sudo make install
I reinstalled my OS recently and now I would like to install this application again, but I don't remember what compile flags I used back then. However, since I kept all files from my home, I still have the source code and my original build. Is there a way to recover the ./configure parameters I used originally?
just re-run make? after all, i think you are mainly after re-running the installation phase rather than the configure-step.
however, to specifically answer your question: autotools record your configure-invocation in the config.status file.
you can call it to re-run your configure phase "in the same conditions":
./config.status --recheck
(this is mainly needed internally by autotools: if you hack your Makefile.am or your configure.ac, automake will rebuild the build-system so the changes have an effect; in order to do this correctly, it must invoke configure in the same way as it was originally called (by the user))
I'm working on a Windows 7 computer at work and want to use the libpostal package. Unfortunately, it's apparently not available for Windows, so I'm trying to configure it through Cygwin and I'm SO close. The last step is to install snappy from Google. Again, not available on Windows...
My assumption (based on nothing) is that I can just download the tarball and build it from source, right? I tried that, and I think it worked? But a) I don't know how to tell, and b) if it did, I don't know how to tell ./configure in libpostal to find it.
In order to build it from source, I downloaded the tarball and saved it in the folder that Cygwin reads as my home, which is C:\cygwin64\home\brittenb\. From there, I ran bash autogen.sh, which created the ./configure that I needed. So I ran that and while some responses to the checks were no, it seemed to run fine. I then ran make and make install. Nothing seemed out of place, so my assumption is that it did what it was supposed to do. I just have no idea where to go from here.
Here is the output from ls after I run everything:
aclocal.m4 snappy.cc
AUTHORS snappy.h
autogen.sh snappy.lo
autom4te.cache snappy.o
ChangeLog snappy.pc
compile snappy.pc.in
config.guess snappy_unittest.cc
config.h snappy_unittest.exe
config.h.in snappy_unittest-snappy_unittest.o
config.log snappy_unittest-snappy-test.o
config.status snappy-c.cc
config.sub snappy-c.h
configure snappy-c.lo
configure.ac snappy-c.o
COPYING snappy-internal.h
depcomp snappy-sinksource.cc
format_description.txt snappy-sinksource.h
framing_format.txt snappy-sinksource.lo
INSTALL snappy-sinksource.o
install-sh snappy-stubs-internal.cc
libsnappy.la snappy-stubs-internal.h
libtool snappy-stubs-internal.lo
ltmain.sh snappy-stubs-internal.o
m4 snappy-stubs-public.h
Makefile snappy-stubs-public.h.in
Makefile.am snappy-test.cc
Makefile.in snappy-test.h
missing stamp-h1
NEWS testdata
README test-driver
ls /usr/local/bin shows nothing, but ls /usr/local/include shows:
snappy.h snappy-c.h snappy-sinksource.h snappy-stubs-public.h
So... my question: did it work? Why does ./configure in libpostal say it can't find snappy? Thanks in advance.
The snappy dependency has been removed as of release 1.0.0. I made changes to the source and make and config so that it will build on MinGW.
Get it in my repository:
https://github.com/BenK10/libpostal_windows
Note that this is not the complete source since not everything had to be changed. I would suggest merging my changes with the official libpostal distribution to make sure you've got everything. Also, there are some extra DLLEXPORTs in some source files that I haven't removed yet, and the part in the Makefile that builds the executables like address_parser.exe was removed because some porting is necessary to build those programs on Windows. You can write your own using the DLL you'll get in the Windows build and the original source as a reference.
Check the return code from make install ($?). If it is zero, make install succeeded.
snappy looks like a library, so maybe it doesn't install anything in /usr/local/bin. The library is probably installed into /usr/local/lib.
First, a little bit of background as to why I'm asking this question: Our product's daily build script (as run under Debian Linux by Jenkins), does roughly this:
Creates and enters a build environment using debootstrap and chroot
Checks out our codebase (including some 3rd party libraries) from SVN
Runs configure and make as necessary to build all of the code
Packages up the results into an install file that can be uploaded to our headless server boxes using our install tool.
This mostly works fine, but every so often (maybe one daily build out of 10), the part of the script that builds one of our third-party libraries will error out with an error like this one:
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash
/root/software/3rdparty/libogg/missing autoconf
/root/software/3rdparty/libogg/missing: line 81: autoconf: command not found
WARNING: 'autoconf' is missing on your system.
You should only need it if you modified 'configure.ac',
or m4 files included by it.
The 'autoconf' program is part of the GNU Autoconf package:
<http://www.gnu.org/software/autoconf/>
It also requires GNU m4 and Perl in order to run:
<http://www.gnu.org/software/m4/>
<http://www.perl.org/>
make: *** [configure] Error 127
As far as I can tell, this happens occasionally because the timestamps of the files in the third-party library are different (e.g. off by a second or two from each other just due to the timing of when they were checked out from the SVN server during that particular build). That causes the configure script to think that it needs to auto-regenerate a file, so then it tries to call 'automake' to do so, and errors out because automake is not installed.
Of course the obvious thing to do here would be to install automake in the build environment, but the build environment is not one that I can easily modify (due to institutional reasons), so I'd like to avoid having to do that if possible. What I'd like to do instead is figure out how to get the configure scripts (which I can modify) to ignore the timestamps and just always do the basic build that they do when the timestamps are equal.
I tried to finesse the problem by manually running 'touch' on some files to force their timestamps to be the same, and that seemed to make the problem occur less often, but it still happens:
./configure --prefix="$PREFIX" --disable-shared --enable-static && \
touch config* aclocal* Makefile* && \
make clean && make install ) || Failure "libogg"
Can anyone familiar with how automake works supply some advice on how I might make the "configure" calls in our daily build work more reliably, without modifying the build environment?
You could try forcing SVN to use commit times on checkout on your Jenkins server. These commit times can also be set in SVN if they don't work out for some reason. You could use touch -d or touch -r instead of just touch to avoid race conditions there.
I'm currently learning how to use the autoconf/automake toolchain. I seem to have a general understanding of the workflow here - basically you have a configure.ac script which generates an executable configure file. The generated configure script is then executed by the end user to generate Makefiles, so the program can be built/installed.
So the installation for a typical end-user is basically:
./configure
make
make install
make clean
Okay, now here's where I'm confused:
As a developer, I've noticed that the auto-generated configure script sometimes won't run, and will error with:
config.status: error: cannot find input file: `somedir/Makefile.in'
This confuses me, because I thought the configure script is supposed to generate the Makefile.in. So Googling around for some answers, I've discovered that this can be fixed with an autogen.sh script, which basically "resets" the state of the autoconf environment. A typical autogen.sh script would be something like:
aclocal \
&& automake --add-missing \
&& autoconf
Okay fine. But as an end-user who's downloaded countless tarballs throughout my life, I've never had to use an autogen.sh script. All I did was uncompress the tarball, and do the usual configure/make/make install/make clean routine.
But as a developer who's now using autoconf, it seems that configure doesn't actually run unless you run autogen.sh first. So I find this very confusing, because I thought the end-user shouldn't have to run autogen.sh.
So why do I have to run autogen.sh first - in order for the configure script to find Makefile.in? Why doesn't the configure script simply generate it?
In order to really understand the autotools utilities you have to remember where they come from: they come from an open source world where there are (a) developers who are working from a source code repository (CVS, Git, etc.) and creating a tar file or similar containing source code and putting that tar file up on a download site, and (b) end-users who are getting the source code tar file, compiling that source code on their system and using the resulting binary. Obviously the folks in group (a) also compile the code and use the resulting binary, but the folks in group (b) don't have or need, often, all the tools for development that the folks in group (a) need.
So the use of the tools is geared towards this split, where the people in group (b) don't have access to autoconf, automake, etc.
When using autoconf, people generally check in the configure.ac file (input to autoconf) into source control but do not check in the output of autoconf, the configure script (some projects do check in the configure script of course: it's up to you).
When using automake, people generally check in the Makefile.am file (input to automake) but do not check in the output of automake: Makefile.in.
The configure script basically looks at your system for various optional elements that the package may or may not need, where they can be found, etc. Once it finds this information, it can use it to convert various XXX.in files (typically, but not solely, Makefile.in) into XXX files (for example, Makefile).
So the steps generally go like this: write configure.ac and Makefile.am and check them in. To build the project from source code control checkout, run autoconf to generate configure from configure.ac. Run automake to generate Makefile.in from Makefile.am. Run configure to generate Makefile from Makefile.in. Run make to build the product.
When you want to release the source code (if you're developing an open source product that makes source code releases) you run autoconf and automake, then bundle up the source code with the configure and Makefile.in files, so that people building your source code release just need make and a compiler and don't need any autotools.
Because the order of running autoconf and automake (and libtool if you use it) can be tricky there are scripts like autogen.sh and autoreconf, etc. which are checked into source control to be used by developers building from source control, but these are not needed/used by people building from the source code release tar file etc.
Autoconf and automake are often used together but you can use autoconf without automake, if you want to write your own Makefile.in.
For this error:
config.status: error: cannot find input file: `somedir/Makefile.in'
In the directory where the configure.ac is located in the Makefile.am add a line with the subdirectory somedir
SUBDIRS = somedir
Inside somedir put a Makefile.am with all the description. then run automaker --add-missing
A better description can be found in 7.1 Recursing subdirectories automake manual.
https://www.gnu.org/software/automake/manual/automake.html
I am trying to install a rubygem which keeps on trying to read a library which is not available.
grep: /usr/lib64/libgdbm.la: No such file or directory
/bin/sed: can't read /usr/lib64/libgdbm.la: No such file or directory
libtool: link: /usr/lib64/libgdbm.la' is not a valid libtool archive
In order to work around this, I installed my own libgdbm and provided the path to the libgdbm in the makefile LDFLAGs but to no avail.
Any help is much appreciated.
This rubygem seems to do dirty stuff, since any clean library search (-L or pkg-config) would have resulted in a message like "library/package gdbm not found". And especially the grep-and-sed procedure on the la file seems really dirty. Make sure Santa knows that the author of this gem gets no presents this year.
The gem probably has the path to the libtool archive hardcoded. First of all, try to grep for /usr/lib64/libgdbm.la in the Makefile of the gem. Change the hardcoded path, and make sure the installation script has no write permissions on any system directories, because it seems to run wild with seds.
Libtool requires intimate knowledge of your compiler suite and operating system in order to be able to create shared libraries and link against them properly. When you install the libtool distribution, a system-specific libtool script is installed into your binary directory.
However, when you distribute libtool with your own packages, you do not always know the compiler suite and operating system that are used to compile your package.
For this reason, libtool must be configured before it can be used. This idea should be familiar to anybody who has used a GNU configure script. configure runs a number of tests for system features, then generates the Makefiles (and possibly a config.h header file), after which you can run make and build the package.
Libtool adds its own tests to your configure script in order to generate a libtool script for the installer's host machine. For this you can play with LT_INIT macro in configure.ac.
So in short, if your package has configure file, run it before running Make
make distclean //clean up all the previous generated files
autoconf //or autoreconf to generate configure script from configure.ac and configure.in
automake //to generate new Makefile.in from Makefile.ac
./configure //to generate new Makefile and libtool