There's a bash file with something like this:
FOO=${BAR:-"/some/path/with/$VAR/in/it"}
Are those double quotes necessary? Based on the following test, I'd say no, and that no quote at all is needed in the above assignment. In fact, it's the user of that variable that needs to expand it within double quotes to avoid wrong splitting.
touch 'some file' # create a file
VAR='some file' # create a variable for that file name
FOO=${BAR:-$VAR} # use it with the syntax above, but no quotes
ls -l "$FOO" # the file does exist (here we do need double quotes)
ls -l $FOO # without quotes it fails searching for files `some` and `file`
rm 'some file' # remove temporary file
Am I correct? Or there's something more?
Are those double quotes necessary?
Not in this case, no.
Am I correct?
Yes. And it's always the user of the variable that has to quote it - field splitting is run when expanding the variable, so when using it it has to be quoted.
There are exceptions, like case $var in and somevar1=$somevar2 - contexts which do not run field splitting, so like do not require quoting. But anyway, quotes do not hurt in such cases and can be used anyway.
Or there's something more?
From POSIX shell:
2.6.2 Parameter Expansion
In addition, a parameter expansion can be modified by using one of the following formats. In each case that a value of word is needed (based on the state of parameter, as described below), word shall be subjected to tilde expansion, parameter expansion, command substitution, and arithmetic expansion.
${parameter:-word}
Because field splitting expansion is not run over word inside ${parameter:-word}, indeed, quoting doesn't do much.
Related
I want to run a command from a bash script which has single quotes and some other commands inside the single quotes and a variable.
e.g. repo forall -c '....$variable'
In this format, $ is escaped and the variable is not expanded.
I tried the following variations but they were rejected:
repo forall -c '...."$variable" '
repo forall -c " '....$variable' "
" repo forall -c '....$variable' "
repo forall -c "'" ....$variable "'"
If I substitute the value in place of the variable the command is executed just fine.
Please tell me where am I going wrong.
Inside single quotes everything is preserved literally, without exception.
That means you have to close the quotes, insert something, and then re-enter again.
'before'"$variable"'after'
'before'"'"'after'
'before'\''after'
Word concatenation is simply done by juxtaposition. As you can verify, each of the above lines is a single word to the shell. Quotes (single or double quotes, depending on the situation) don't isolate words. They are only used to disable interpretation of various special characters, like whitespace, $, ;... For a good tutorial on quoting see Mark Reed's answer. Also relevant: Which characters need to be escaped in bash?
Do not concatenate strings interpreted by a shell
You should absolutely avoid building shell commands by concatenating variables. This is a bad idea similar to concatenation of SQL fragments (SQL injection!).
Usually it is possible to have placeholders in the command, and to supply the command together with variables so that the callee can receive them from the invocation arguments list.
For example, the following is very unsafe. DON'T DO THIS
script="echo \"Argument 1 is: $myvar\""
/bin/sh -c "$script"
If the contents of $myvar is untrusted, here is an exploit:
myvar='foo"; echo "you were hacked'
Instead of the above invocation, use positional arguments. The following invocation is better -- it's not exploitable:
script='echo "arg 1 is: $1"'
/bin/sh -c "$script" -- "$myvar"
Note the use of single ticks in the assignment to script, which means that it's taken literally, without variable expansion or any other form of interpretation.
The repo command can't care what kind of quotes it gets. If you need parameter expansion, use double quotes. If that means you wind up having to backslash a lot of stuff, use single quotes for most of it, and then break out of them and go into doubles for the part where you need the expansion to happen.
repo forall -c 'literal stuff goes here; '"stuff with $parameters here"' more literal stuff'
Explanation follows, if you're interested.
When you run a command from the shell, what that command receives as arguments is an array of null-terminated strings. Those strings may contain absolutely any non-null character.
But when the shell is building that array of strings from a command line, it interprets some characters specially; this is designed to make commands easier (indeed, possible) to type. For instance, spaces normally indicate the boundary between strings in the array; for that reason, the individual arguments are sometimes called "words". But an argument may nonetheless have spaces in it; you just need some way to tell the shell that's what you want.
You can use a backslash in front of any character (including space, or another backslash) to tell the shell to treat that character literally. But while you can do something like this:
reply=\”That\'ll\ be\ \$4.96,\ please,\"\ said\ the\ cashier
...it can get tiresome. So the shell offers an alternative: quotation marks. These come in two main varieties.
Double-quotation marks are called "grouping quotes". They prevent wildcards and aliases from being expanded, but mostly they're for including spaces in a word. Other things like parameter and command expansion (the sorts of thing signaled by a $) still happen. And of course if you want a literal double-quote inside double-quotes, you have to backslash it:
reply="\"That'll be \$4.96, please,\" said the cashier"
Single-quotation marks are more draconian. Everything between them is taken completely literally, including backslashes. There is absolutely no way to get a literal single quote inside single quotes.
Fortunately, quotation marks in the shell are not word delimiters; by themselves, they don't terminate a word. You can go in and out of quotes, including between different types of quotes, within the same word to get the desired result:
reply='"That'\''ll be $4.96, please," said the cashier'
So that's easier - a lot fewer backslashes, although the close-single-quote, backslashed-literal-single-quote, open-single-quote sequence takes some getting used to.
Modern shells have added another quoting style not specified by the POSIX standard, in which the leading single quotation mark is prefixed with a dollar sign. Strings so quoted follow similar conventions to string literals in the ANSI standard version of the C programming language, and are therefore sometimes called "ANSI strings" and the $'...' pair "ANSI quotes". Within such strings, the above advice about backslashes being taken literally no longer applies. Instead, they become special again - not only can you include a literal single quotation mark or backslash by prepending a backslash to it, but the shell also expands the ANSI C character escapes (like \n for a newline, \t for tab, and \xHH for the character with hexadecimal code HH). Otherwise, however, they behave as single-quoted strings: no parameter or command substitution takes place:
reply=$'"That\'ll be $4.96, please," said the cashier'
The important thing to note is that the single string that gets stored in the reply variable is exactly the same in all of these examples. Similarly, after the shell is done parsing a command line, there is no way for the command being run to tell exactly how each argument string was actually typed – or even if it was typed, rather than being created programmatically somehow.
Below is what worked for me -
QUOTE="'"
hive -e "alter table TBL_NAME set location $QUOTE$TBL_HDFS_DIR_PATH$QUOTE"
EDIT: (As per the comments in question:)
I've been looking into this since then. I was lucky enough that I had repo laying around. Still it's not clear to me whether you need to enclose your commands between single quotes by force. I looked into the repo syntax and I don't think you need to. You could used double quotes around your command, and then use whatever single and double quotes you need inside provided you escape double ones.
just use printf
instead of
repo forall -c '....$variable'
use printf to replace the variable token with the expanded variable.
For example:
template='.... %s'
repo forall -c $(printf "${template}" "${variable}")
Variables can contain single quotes.
myvar=\'....$variable\'
repo forall -c $myvar
I was wondering why I could never get my awk statement to print from an ssh session so I found this forum. Nothing here helped me directly but if anyone is having an issue similar to below, then give me an up vote. It seems any sort of single or double quotes were just not helping, but then I didn't try everything.
check_var="df -h / | awk 'FNR==2{print $3}'"
getckvar=$(ssh user#host "$check_var")
echo $getckvar
What do you get? A load of nothing.
Fix: escape \$3 in your print function.
Does this work for you?
eval repo forall -c '....$variable'
Hello I'm reading a book about bash scripting and the author says to add the following to the end of my .bashrc file. export PATH=~/bin:"$PATH" in order to execute my file from the command line by typing its name. I notice however that if I put export PATH=~/bin:$PATH I can achieve the same result. So my question is what is the difference between the one with quotes and the one without quotes? thanks.
The quotes won't hurt anything, but neither are they necessary. Assignments are processed specially by the shell. From the man page:
A variable may be assigned to by a statement of the form
name=[value]
If value is not given, the variable is assigned the null string. All values undergo tilde expansion, parameter and variable
expansion, command substitution, arithmetic expansion, and
quote removal (see EXPANSION below).
Notice that word-splitting and pathname generation are not on the list in bold. These are the two types of expansion you are trying to prevent by quoting a parameter expansion, but in this context they are not performed. The same rules apply to the assignments that are passed to the export built-in command.
You must include the variable PATH inside double quotes. So that it would handle the filepaths which has spaces but without double quotes, it won't handle the filenames which has spaces in it.
I was facing the same with trying to assign a JSON string to a variable in the terminal.
Wrap it with Single Quotes or Double Quotes
Use single quotes, if you string contains double quotes and vice-versa.
$ export TEMP_ENV='I like the "London" bridge'
$ echo $TEMP_ENV
>> I like the "London" bridge
$ export TEMP_ENV="I like the 'London' bridge"
$ echo $TEMP_ENV
>> I like the 'London' bridge
I have program whose textual output I want to directly execute in a shell. How shall I format the output of this program such that the paths with spaces are accepted by the shell ?
$(echo ls /folderA/folder\ with\ spaces/)
Some more info: the program that generates the output is coded in Haskell (source). It's a simple program that keeps a list of my favorite commands. It prints the commands with 'cmdl -l'. I can then choose one command to execute with 'cmdl -g12' for command number 12. Thanks for pointing out that instead of $( ) use 'cmdl -g12 | bash', I wasn't aware of that...
How shall I format the output of this program such that the paths with
spaces are accepted by the shell ?
The shell cannot distinguish between spaces that are part of a path and spaces that are separator between arguments, unless those are properly quoted. Moreover, you actually need proper quoting using single quotes ('...') in order to "shield" all those characters combinations that might otherwise have special meaning for the shell (\, &, |, ||, ...).
Depending the language used for your external tool, their might be a library available for that purpose. As as example, Python has pipes.quote (shlex.quote on Python 3) and Perl has String::ShellQuote::shell_quote.
I'm not quite sure I understand, but don't you just want to pipe through the shell?
For a program called foo
$ foo | sh
To format output from your program so Bash won't try to space-separate them into arguments either update, probably easiest just to double-quote them with any normal quoting method around each argument, e.g.
mkdir "/tmp/Joey \"The Lips\" Fagan"
As you saw, you can backslash the spaces alternatively, but I find that less readable ususally.
EDIT:
If you may have special shell characters (&|``()[]$ etc), you'll have to do it the hard/proper way (with a specific escaper for your language and target - as others have mentioned.
It's not just spaces you need to worry about, but other characters such as [ and ] (glob a.k.a pathname-expansion characters) and metacharacters such as ;, &, (, ...
You can use the following approach:
Enclose the string in single quotes.
Replace existing single quotes in the string with '\'' (which effectively breaks the string into multiple parts with spliced in \-escaped single quotes; the shell then reassembles the parts into a single string).
Example:
I'm good (& well[1];) would encode to 'I'\''m good (& well[1]);'
Note how single-quoting allows literal use of the glob characters and metacharacters.
Since single quotes themselves can never be used within single-quoted strings (there's not even an escape), the splicing-in approach described above is needed.
As described by #mklement0, a safe algorithm is to wrap every argument in a pair of single quotes, and quote single quotes inside arguments as '\''. Here is a shell function that does it:
function quote {
typeset cmd="" escaped
for arg; do
escaped=${arg//\'/\'\\\'\'}
cmd="$cmd '$escaped'"
done
printf %s "$cmd"
}
$ quote foo "bar baz" "don't do it"
'foo' 'bar baz' 'don'\''t do it'
I want to run a command from a bash script which has single quotes and some other commands inside the single quotes and a variable.
e.g. repo forall -c '....$variable'
In this format, $ is escaped and the variable is not expanded.
I tried the following variations but they were rejected:
repo forall -c '...."$variable" '
repo forall -c " '....$variable' "
" repo forall -c '....$variable' "
repo forall -c "'" ....$variable "'"
If I substitute the value in place of the variable the command is executed just fine.
Please tell me where am I going wrong.
Inside single quotes everything is preserved literally, without exception.
That means you have to close the quotes, insert something, and then re-enter again.
'before'"$variable"'after'
'before'"'"'after'
'before'\''after'
Word concatenation is simply done by juxtaposition. As you can verify, each of the above lines is a single word to the shell. Quotes (single or double quotes, depending on the situation) don't isolate words. They are only used to disable interpretation of various special characters, like whitespace, $, ;... For a good tutorial on quoting see Mark Reed's answer. Also relevant: Which characters need to be escaped in bash?
Do not concatenate strings interpreted by a shell
You should absolutely avoid building shell commands by concatenating variables. This is a bad idea similar to concatenation of SQL fragments (SQL injection!).
Usually it is possible to have placeholders in the command, and to supply the command together with variables so that the callee can receive them from the invocation arguments list.
For example, the following is very unsafe. DON'T DO THIS
script="echo \"Argument 1 is: $myvar\""
/bin/sh -c "$script"
If the contents of $myvar is untrusted, here is an exploit:
myvar='foo"; echo "you were hacked'
Instead of the above invocation, use positional arguments. The following invocation is better -- it's not exploitable:
script='echo "arg 1 is: $1"'
/bin/sh -c "$script" -- "$myvar"
Note the use of single ticks in the assignment to script, which means that it's taken literally, without variable expansion or any other form of interpretation.
The repo command can't care what kind of quotes it gets. If you need parameter expansion, use double quotes. If that means you wind up having to backslash a lot of stuff, use single quotes for most of it, and then break out of them and go into doubles for the part where you need the expansion to happen.
repo forall -c 'literal stuff goes here; '"stuff with $parameters here"' more literal stuff'
Explanation follows, if you're interested.
When you run a command from the shell, what that command receives as arguments is an array of null-terminated strings. Those strings may contain absolutely any non-null character.
But when the shell is building that array of strings from a command line, it interprets some characters specially; this is designed to make commands easier (indeed, possible) to type. For instance, spaces normally indicate the boundary between strings in the array; for that reason, the individual arguments are sometimes called "words". But an argument may nonetheless have spaces in it; you just need some way to tell the shell that's what you want.
You can use a backslash in front of any character (including space, or another backslash) to tell the shell to treat that character literally. But while you can do something like this:
reply=\”That\'ll\ be\ \$4.96,\ please,\"\ said\ the\ cashier
...it can get tiresome. So the shell offers an alternative: quotation marks. These come in two main varieties.
Double-quotation marks are called "grouping quotes". They prevent wildcards and aliases from being expanded, but mostly they're for including spaces in a word. Other things like parameter and command expansion (the sorts of thing signaled by a $) still happen. And of course if you want a literal double-quote inside double-quotes, you have to backslash it:
reply="\"That'll be \$4.96, please,\" said the cashier"
Single-quotation marks are more draconian. Everything between them is taken completely literally, including backslashes. There is absolutely no way to get a literal single quote inside single quotes.
Fortunately, quotation marks in the shell are not word delimiters; by themselves, they don't terminate a word. You can go in and out of quotes, including between different types of quotes, within the same word to get the desired result:
reply='"That'\''ll be $4.96, please," said the cashier'
So that's easier - a lot fewer backslashes, although the close-single-quote, backslashed-literal-single-quote, open-single-quote sequence takes some getting used to.
Modern shells have added another quoting style not specified by the POSIX standard, in which the leading single quotation mark is prefixed with a dollar sign. Strings so quoted follow similar conventions to string literals in the ANSI standard version of the C programming language, and are therefore sometimes called "ANSI strings" and the $'...' pair "ANSI quotes". Within such strings, the above advice about backslashes being taken literally no longer applies. Instead, they become special again - not only can you include a literal single quotation mark or backslash by prepending a backslash to it, but the shell also expands the ANSI C character escapes (like \n for a newline, \t for tab, and \xHH for the character with hexadecimal code HH). Otherwise, however, they behave as single-quoted strings: no parameter or command substitution takes place:
reply=$'"That\'ll be $4.96, please," said the cashier'
The important thing to note is that the single string that gets stored in the reply variable is exactly the same in all of these examples. Similarly, after the shell is done parsing a command line, there is no way for the command being run to tell exactly how each argument string was actually typed – or even if it was typed, rather than being created programmatically somehow.
Below is what worked for me -
QUOTE="'"
hive -e "alter table TBL_NAME set location $QUOTE$TBL_HDFS_DIR_PATH$QUOTE"
EDIT: (As per the comments in question:)
I've been looking into this since then. I was lucky enough that I had repo laying around. Still it's not clear to me whether you need to enclose your commands between single quotes by force. I looked into the repo syntax and I don't think you need to. You could used double quotes around your command, and then use whatever single and double quotes you need inside provided you escape double ones.
just use printf
instead of
repo forall -c '....$variable'
use printf to replace the variable token with the expanded variable.
For example:
template='.... %s'
repo forall -c $(printf "${template}" "${variable}")
Variables can contain single quotes.
myvar=\'....$variable\'
repo forall -c $myvar
I was wondering why I could never get my awk statement to print from an ssh session so I found this forum. Nothing here helped me directly but if anyone is having an issue similar to below, then give me an up vote. It seems any sort of single or double quotes were just not helping, but then I didn't try everything.
check_var="df -h / | awk 'FNR==2{print $3}'"
getckvar=$(ssh user#host "$check_var")
echo $getckvar
What do you get? A load of nothing.
Fix: escape \$3 in your print function.
Does this work for you?
eval repo forall -c '....$variable'
A="echo 'q'"
$A
I got the result 'q'
but if I type echo 'q' directly, it's q (without single quote)
So, I wonder what rule does bash follow while facing single quotes inside the double quotes.
The original problem is
A="curl http://123.196.125.62/send -H 'Host: poj.org' -e http://poj.org/send"
$A
I got curl: (6) Couldn't resolve host 'poj.org''
it will be all right if I just type the command into the terminal..
P.S. I'd like to use $A for excuting the command inside A
Please see BashFAQ/050: I'm trying to put a command in a variable, but the complex cases always fail!
It's best to avoid putting commands in variables for the reason you've experienced, among others.
You should use a function and pass it arguments.
Why do you want to do this rather than simply executing the command directly?
If you must do it, use an array:
A=(curl http://123.196.125.62/send -H 'Host: poj.org' -e http://poj.org/send)
${A[#]}
Regarding the treatment of single quotes within double quotes, they are treated literally and as part of the rest of the string. Here is the relevant paragraph from man bash:
Enclosing characters in double quotes preserves the literal value of
all characters within the quotes, with the exception of $, `, \, and,
when history expansion is enabled, !. The characters $ and ` retain
their special meaning within double quotes. The backslash retains its
special meaning only when followed by one of the following characters:
$, `, ", \, or <newline>. A double quote may be quoted within double
quotes by preceding it with a backslash. If enabled, history expansion
will be performed unless an ! appearing in double quotes is escaped
using a backslash. The backslash preceding the ! is not removed.
If you want to "save" a command for later execution, you do NOT want a variable. You want a function.
a() { curl http://123.196.125.62/send -H 'Host: poj.org' -e http://poj.org/send; }
Putting code in variables is bad since variables are containers for data not code. Additionally, you are seeing the problem because $A does NOT execute the bash code in A, what it really does is split the value of A into words, then it performs Pathname Expansion on these words, and as a result of those two operations, it executes a program named by the first resulting word and passes the other words as arguments. In your particular case, this is what happens (I use [] to indicate "units"):
A: [echo 'q']
after wordsplitting: [echo] ['q']
after pathname expansion: [echo] ['q']
Now bash looks for a program called echo and passes the argument 'q' to it.
This is NOT executing bash code, because if you execute echo 'q' as bash code, bash removes the single quotes after it's done with them. Similarly, you cannot do pipes, redirection et al. like this, because they too are bash syntax (just like your single quotes).
Recap: never put code in bash variables. never leave parameters unquoted (if you think doing that fixes something, you are wrong, you've just made things worse, go fix the real problem). The solution is to use a function.
You'd better use backquotes in this case:
A=`curl http://123.196.125.62/send -H 'Host: poj.org' -e 'http://poj.org/send'`