I made some changes to a few files within VS 2019.
I added a comment and clicked Commit All under Git Changes tab (didnt do a Push).
I realised i made a mistake by including some temp files so i clicked Revert under Git Repository Explorer against the comment i made.
All my changes have been lost in VS 2019..... Is there anyway to recover my changes?
Managed to resolve this after panicking a bit!! Just in case this helps anyone
Clicked Git in the VS 2019 menu.
View Branch History.
Under Local History, i right clicked the row where i made the changes and added my comment.
Selected Revert > accepted the warning
All my work was restored. I then continued to do the usual Commit and Push which then pushed my changes to the repo and i was able to verify that.
Related
I'm using the standard xcode source control (version 9.3)
I just reopened my project and when I go to the Source Control Navigator:
It shows a long hex string at the top instead of the current branch name
None of the branches have '(current)' next to them
I have tried cleaning the project and also closing and re-opening.
Source Control->Commit brings up the standard commit interface with the option to leave a comment.
When I click on the very top row (with blue icon) I can see the new commits but they don't show in any of the branches.
What am I doing wrong?
This worked for me:
I clicked on the row with the long hex name. This brought up the version history for the current version.
I right-clicked the most recent change in the change history.
I clicked 'Branch from...' and created a new branch from that point.
For those wondering how something like this could have happened, it is caused when you checkout a commit rather than checkout a branch. Even if you checkout a commit inside the branch that is "current" (even the most recent commit), this will cause the branch to no longer have the "current" written next to it. So when you are sure that this previous commit that you have now checked out is the commit you want to work with, then you must do what Derek posted to do which is to "Branch from..." to make a temporary branch and then merge this temporary branch into the branch that this previous commit originally came from. And then you can delete the temporary branch. It is somewhat of a pain, but a good reason why Xcode does this is so that you are well aware that you are on a previous commit and that you should really make sure this previous commit is what you want your current branch to be at.
I have a project stored on my Mac and created a repository for from that location to my project. I am able to commit using source tree but now I would like to revert back to an earlier commit so all my files in folder update? I'm not sure how i do this?
Temporary Revert Back
If you want to temporarily go back to this commit, then come back to where you are.
Right click on the commit you want to revert to and click on "checkout".
Permanent Revert Back
This will add commits to revert all your work since this commit
Right click on the commit you want to revert to and click on "Reset <> to this commit".
I think in above discussion #dominones and #Giraldi maybe misunderstand each other,
#Giraldi maybe want to delete those unwanted commits permanently in the GIT, and make the git go back to a certain history commit, from there he could start all over again, like you want to be fresh from the beginning of somewhere.
while #dmonones is showing just how to revert back to a status of your code in a history, discarding some code changes you did, which will mostly end up with a new commit aiming to remove a unwanted/mistaken change,
without changing the git history.
To discard an already committed commit in git history, you need to use hard reset and push with force.
My team and I started a project at Azure and we have a git as the VCS/SCM.
One of my partners had made a few changes, and he had commited them. When I try to get those changes at my local repository, and I press sync at the Visual Studio, the following message appears
Cannot merge because there are uncommitted changes. Commit or undo
your changes before merging again. See the Output window for details.
The output window shows the message below
Cannot complete the operation because of existing changes to the
following file:Project\Project.csproj
I have searched everywhere at google, but I did not find anything similar.
Can anyone help me with this?
We are stack.
Thanks a lot
It probably means VisualStudio automatically added some references to the file ProjectProject.csproj, where it keeps general project settings. In VisualStudio 2013 you may do:
Go to the TeamExplorer
Select "Changes"
Search through Included and Excluded Changes, .csproj file is probably there
Right click on it and select compare with unchanged to see the differences
Now choose to commit it or undo the changes (if, for example, the changes are not necessary) to be able to sync with the current repository.
I had this same dilemma and it turned out that somehow the file that was preventing me from switching branches and was in my solution, was not being tracked like the other files were. I just added it to source control via the explorer window, committed and pushed it, then I was able to switch branches just fine. Hope this helps.
I am using Github GUI for Mac.
Now I've some changes in my local repository, but I want to ignore them and pull latest remote repository.
I tried Repository/Pull, but got Git Error.
"•error: Your local changes to the following files would be overwritten by merge:
Classes/xxx.m
Please, commit your changes or stash them before you can merge."
I tried Repository/Synchronize, but got following error.
"Sync Failed. Please commit all your changes before syncing."
Any idea?
Place a checkmark near each of the changed files, then go to the Repository menu and click Discard Changes to Selected Files.
If you mean using MAC GUI only, check and right click the changed files then select the discard the changes.
if you want to remove your uncommitted changes, just do a checkout on those files again.
Stash is super easy too though, and it keeps your changes in a local 'bucket' or stash :)
For those on Github for Windows, it is not obvious where Discard All Changes is, so I wanted to share this:
Select Files by using check mark next to names.
Right click on Collapse All/ Expand All button with two arrows. (This button is on right side of Files to Commit box, and under Sync and Gear icons.) This is where Discard All Changes is >hidden<.
Sorry but too low level to add comment to #Leo wangs or #aspiringwebdev chain above. You gotta start somewhere...
Are there any good techniques to help us know which branch (or trunk) our working copy is from? We recently converted to Subversion and we're using release branches. I had two developers commit changes to the release branch that should have been committed to the trunk. We're using CI (TeamCity), so I recognized the problem right away and was able to revert the changes but I'd like to prevent it from happening again. From within Visual Studio, especially, it's easy to make a mistake and commit to the wrong branch.
We're using TortoiseSVN and AnkhSVN.
Edited to add:
Just to clarify, I'm looking for a method to prevent careless mistakes, I already know how to find this information. There are two careless mistakes I'm trying to prevent:
Doing work on the wrong branch. If this is caught before commit, the developer has to merge the changes back into the correct branch.
Committing to the wrong branch. This combines the pain of point 1 with having to revert the changes in Subversion.
Edited to add: We just made the switch to the VisualSVN VS plugin and it has a toolbar that displays the path of the current working copy. I really like the reassurance that I'm working on the right branch.
Perhaps you should consider using a pre-commit hook: http://svnbook.red-bean.com/nightly/en/svn.reposadmin.create.html
Then you could do something like only approve checkins that have 'for release' in the comments for that particular branch or something like that and return an error message otherwise.
In AnkhSVN (in Visual Studio) the project url of your working copy is from is displayed in the 'Working on' field of the Pending Changes Window (View->Pending Changes).
The url of a file/folder is also displayed in the Visual Studio project window when you select a file in the Pending Changes Window or Working Copy Explorer (and in many cases even when you select a file in the Solution explorer; but this depends on the project type).
[Update: I just added AnkhSVN issue #581 for extension of the commit dialog.]
Tortoise SVN adds columns to the Windows Explorer view. In "Details" mode, right-click on column headers to get a list of available columns, at the bottom, select "More" to get a dialog of all available column types.
SVN short URL should quickly show you what the location is in the repository.
But this doesn't appear to work under vista ...
Right click the folder, move to the subversion tab, there it says the project it's linked to.
Also, in the commit dialog, it says so at the top of the dialog.
From the working directory:
svn info
URL will contain the branch your working directory points to.
<EDIT> Seeing how many people dislike the command line, the closes thing I found from TortoiseSVN is the "repo browser" which seems to use the selected branch as your starting path in the repo. </EDIT>
Avoid re-using working copies. If you're working on 2 places in the repository, have 2 working copies, named appropriately, like: Project-trunk, Project-release.
Here is a simple idea which might help:
Create an empty text file named "branch_XX" (or any name) and add it to your branch.
commit this and then when you switch to the trunk, the file will not appear in the solution explorer.
It sounds stupid... but it does the trick.
I really hope they will add something that might mark what branch we are using without going to other windows.
In AnkhSVN (in Visual Studio), right click on your project/solution, then Source Control -> Subversion -> Select in Repository Explorer. It will automatically select the branch you're currently working on (i.e. the branch you're switched to).
I don't think that the accepted answer for AnkhSVN works for Projects, since I always see the same URL in the "Pending Changes" even after I use the option "Switch Project" on a project.