I installed-
Rstudio
R 4.1.2
3)Anaconda
4)Python 3.9
The command I tried to execute-
install.packages("tensorflow")
install_tensorflow
The error I get after executing these-
Could not fetch URL https://pypi.org/simple/tensorflow/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/tensorflow/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement tensorflow==2.7.* (from versions: none)
ERROR: No matching distribution found for tensorflow==2.7.*
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Error: Error installing package(s): ""tensorflow==2.7.*""
Related
stream_socket_client(): SSL operation failed with code 1. OpenSSL Error messages:
error:14094438:SSL routines:ssl3_read_bytes:tlsv1 alert internal error
I got error when I try to send a notification using Apple portal. Can you help me with global solutions.?
I am behind a corporate proxy. I am trying to download BERT's vocabulary.
_, vocab_bert = gluonnlp.model.bert_12_768_12(dataset_name='wiki_multilingual_uncased',
pretrained=False, root='./model')
HTTPSConnectionPool(host='apache-mxnet.s3-accelerate.dualstack.amazonaws.com',
port=443): Max retries exceeded with url:
/gluon/dataset/vocab/wiki_multilingual_uncased-2b2514cc.zip
(Caused by NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection
object at 0x7f43c2650b38>:
Failed to establish a new connection: [Errno -2] Name or service not known',))
How can provide my proxy data to gluonnlp in my Jupyter Notebook?
The solution I found was to set up the proxy in my Jupyter notebook:
import os
os.environ['http_proxy'] = "http://user:password01ge#proxy.com:8080/"
os.environ['https_proxy'] = "https://user:password01ge#proxy.com:8080/"
So, for magento2 i need to install : PHP Extension intl.
Now after looking up i'm trying to do this but i keep getting errros. I'm on a MAC and i'm using XAMPP, too bad when i run 'sudo pecl install int' i get the following error.
Starting to download intl-3.0.0.tgz (248,200 bytes)
.....done: 248,200 bytes
150 source files, building
running: phpize
Configuring for:
PHP Api Version: 20170718
Zend Module Api No: 20170718
Zend Extension Api No: 320170718
autom4te: need GNU m4 1.4 or later: /usr/bin/m4
ERROR: `phpize' failed
I also tried using 'sudo pecl update-channels' But that gives me the following messages:
Updating channel "doc.php.net"
Channel "doc.php.net" is not responding over http://, failed with message: File http://doc.php.net:80/channel.xml not valid (redirected but no location)
Trying channel "doc.php.net" over https:// instead
Cannot retrieve channel.xml for channel "doc.php.net" (Connection to `ssl://doc.php.net:443' failed: Connection refused)
Updating channel "pear.php.net"
Channel "pear.php.net" is up to date
Updating channel "pear.phpunit.de"
Channel "pear.phpunit.de" is not responding over http://, failed with message: File http://pear.phpunit.de:80/channel.xml not valid (received: HTTP/1.1 404 Not Found
)
Trying channel "pear.phpunit.de" over https:// instead
Cannot retrieve channel.xml for channel "pear.phpunit.de" (Connection to `ssl://pear.phpunit.de:443' failed: )
Updating channel "pear.symfony-project.com"
Channel "pear.symfony-project.com" is up to date
Updating channel "pecl.php.net"
Channel "pecl.php.net" is up to date
What can i do to solve this? I'm using XAMPP with PHP 7.2
I keep getting an error while updating conda:
CondaHTTPError: HTTP 000 CONNECTION FAILED for url https://repo.anaconda.com/pkgs/r/noarch/repodata.json.bz2
Elapsed: -
An HTTP error occurred when trying to retrieve this URL.
HTTP errors are often intermittent, and a simple retry will get you on your way.
If your current network has https://www.anaconda.com blocked, please file
a support request with your network engineering team.
ProxyError(MaxRetryError("HTTPSConnectionPool(host='repo.anaconda.com', port=443):
Max retries exceeded with url:
/pkgs/r/noarch/repodata.json.bz2 (
Caused by ProxyError(
'Cannot connect to proxy.',
OSError('Tunnel connection failed: 407 Proxy Authentication Required',)))",
),
)
A reportable application error has occurred. Conda has prepared the above report.
Upload did not complete.
I tried this in the .condarc file
proxy_servers:
http: http://proxy.corp.local:8080
https: https://proxy.corp.local:8080
and
proxy_servers:
http: http://user:pass#corp.com:8080
https: https://user:pass#corp.com:8080
ssl_verify: True
ssl_verify: False
Regards
Bjorn
I also got the same error message and it is solved after googling so much.
Steps for solving the problem is given below
Create a .condrac file using the conda config command in command prompt or use a text editor to create a text file. I used conda config for creating the .condrac file
You can add following line into the .condrac file located in your user home directory or home
directory
proxy_servers:
http: http://username:password#proxyIP/Proxy URL:port no
https: http://username:password#proxyIP/ProxyURL:port no
ssl_verify: True
Same file can be copied into your anaconda home directory.(C:\ProgramData\Anaconda3 in my case)
Then run > conda update conda command from your prompt
Then you will be getting the result like below. C:\Users\USER.DESKTOP-BQVL8L4>conda update conda
Solving environment: done
Rerun your installation command. This solution worked well for me. Please try and let me know.
Copy files libcrypto-1_1-x64.dll and libssl-1_1-x64.dll
from the directory ./Anaconda3/Library/bin/
to ./Anaconda3/DLLs.
This method solved the problem that I had
I set up a new virtualenv. From within it, pip cannot find any distributions. Outside of the env, it can. Here's the output:
(wagon-admin)[me#pjs-macbook-pro wagon-admin]$ pip install Django
Downloading/unpacking Django
Could not fetch URL https://pypi.python.org/simple/Django/: There was a problem confirming the ssl certificate: <urlopen error [Errno 1] _ssl.c:480: error:0D0890A1:asn1 encoding routines:ASN1_verify:unknown message digest algorithm>
Will skip URL https://pypi.python.org/simple/Django/ when looking for download links for Django
Could not fetch URL https://pypi.python.org/simple/: There was a problem confirming the ssl certificate: <urlopen error [Errno 1] _ssl.c:480: error:0D0890A1:asn1 encoding routines:ASN1_verify:unknown message digest algorithm>
Will skip URL https://pypi.python.org/simple/ when looking for download links for Django
Cannot fetch index base URL https://pypi.python.org/simple/
Could not fetch URL https://pypi.python.org/simple/Django/: There was a problem confirming the ssl certificate: <urlopen error [Errno 1] _ssl.c:480: error:0D0890A1:asn1 encoding routines:ASN1_verify:unknown message digest algorithm>
Will skip URL https://pypi.python.org/simple/Django/ when looking for download links for Django
Could not find any downloads that satisfy the requirement Django
No distributions at all found for Django
Storing complete log in /Users/me/.pip/pip.log
I'm on OSX, and created the virtual environment using virtualenvwrapper. $ mkvirtualenv <env name>
This happens for all packages, not just django.
Edit: Only similar thing I've found in my searching: https://github.com/pypa/pip/issues/829
I had the same problem but realized I hadn't activated my virtualenv. Once I activated it, the installation worked. Not sure why.
Looking at the command line you pasted, it looks like you activated your env, but just wanted to note this for others who happen to stumble across this.
I updated to python 2.7 and everything works fine now.